[linux-dvb] Any chance for "Medion 7134 Bridge #2 [16be:0005]" to be fully supported?

Hartmut Hackmann hartmut.hackmann at t-online.de
Mon Jun 18 01:05:35 CEST 2007


Hi, Andreas

Andreas Krause schrieb:
> Hi there!
> 
> I have problems to enable the DVB part of the following DVB-S card:
> 
> card=93, "Medion 7134 Bridge #2 [16be:0005]"
> 
> It is exactly the same card as this one (even printed on PCB):
> http://www.creatix.de/support/download/gruppe6/CTX929_spec.pdf
> 
> Chipset:
> SD1878/SHA, SAA7134HL, TDA10086HT
> 
> #lspci -v
> 00:06.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL
> Video Broadcast Decoder (rev 01)
>         Subsystem: Creatix Polymedia GmbH Unknown device 0005
>         Flags: bus master, medium devsel, latency 32, IRQ 5
>         Memory at ea000000 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [40] Power Management version 1
> 
> #lsmod | grep saa
> saa7134               117696  0 
> video_buf              23364  1 saa7134
> compat_ioctl32          1376  1 saa7134
> ir_kbd_i2c              8656  1 saa7134
> i2c_core               20480  9
> w83627hf,i2c_isa,eeprom,dvb_usb,dvb_pll,i2c_viapro,tuner,saa7134,ir_kbd_i2c
> ir_common              34084  2 saa7134,ir_kbd_i2c
> videodev               25952  1 saa7134
> v4l2_common            15904  3 tuner,saa7134,videodev
> v4l1_compat            12420  2 saa7134,videodev
> 
> 
> #dmesg
> saa7134[0]: found at 0000:00:06.0, rev: 1, irq: 5, latency: 32, mmio:
> 0xea000000
> saa7134[0]: subsystem: 16be:0005, board: Medion 7134 Bridge #2
> [card=93,autodetected]
> saa7134[0]: board init: gpio is 0
> saa7134[0]: Medion 7134 Bridge #2: dual saa713x broadcast decoders
> saa7134[0]: Sorry, none of the inputs to this chip are supported yet.
> saa7134[0]: Dual decoder functionality is disabled for now, use the other
> chip.
> saa7134[0]: i2c eeprom 00: be 16 05 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
> saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 21 02 51 96 2b
> saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
> saa7134[0]: i2c eeprom 40: ff 24 00 c0 ff 1c 00 ff ff ff fd 79 44 9f c2 8f
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> 
> 
> modprobe tda10086 has no effect.
> 
> Kernel and modules are linux-image-2.6.21-1-686_2.6.21-4_i386.deb (current
> debian unstable).
> 
> Any other info needed?
> 
> Thanks for your help!
> 
> CU - nak
> 
It should be possible.
Tuner and channel decoder are supported (though there is a problem with
the DISEQc i need to cross check).
But i will need additional information:
What is the type of the LNB controller?
This an additional chip on the board, possibly in a small package sitting close
to an inductor.
(might be ISl64xx)

Hartmut




More information about the linux-dvb mailing list