[linux-dvb] revised initial tuning data for au-Melbourne

[Peter D.]

Hi, 

I'm not certain exactly what should be in 
dvb-apps-2e83ebcb51de/util/scan/dvb-t/au-Melbourne 
but things work better if channel 7's guard interval 
is changed.  

With the tarball I downloaded a few days ago 
"scan au-Melbourne > temp" does not put anything 
into temp about channel 7, after changing the 
guard interval output for channel 7 is also 
put into temp.  The exact same temp file is 
created if the last six fields of each line 
in au-Melbourne is changed to AUTO.  

Strangely, a lot of tuning failed messages 
went to standard error with all of the input files; 
original, changed GI, and six fields of AUTO.  

My tuner is an MSI PC at nywhere A/D PCI card

->lspci -s 05:07
05:07.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video 
Broadcast Decoder (rev d1)

->lspci -s 05:07 -n
05:07.0 0480: 1131:7133 (rev d1)

It is a hybrid LifeView LR306 clone.  


-- 
sig goes here...
Peter D.
-------------- next part --------------
# Australia / Melbourne (Mt Dandenong transmitters)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
# ABC
T 226500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
# Seven
T 177500000 7MHz 2/3 NONE QAM64 8k 1/16 NONE
# Nine
T 191625000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
# Ten
T 219500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
# SBS
T 536625000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-------------- next part --------------
# Australia / Melbourne (Mt Dandenong transmitters)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
# ABC
T 226500000 7MHz AUTO AUTO AUTO AUTO AUTO AUTO
# Seven
T 177500000 7MHz AUTO AUTO AUTO AUTO AUTO AUTO
# Nine
T 191625000 7MHz AUTO AUTO AUTO AUTO AUTO AUTO
# Ten
T 219500000 7MHz AUTO AUTO AUTO AUTO AUTO AUTO
# SBS
T 536625000 7MHz AUTO AUTO AUTO AUTO AUTO AUTO