[linux-dvb] About TT-3200

magnus at rotmark.se magnus at rotmark.se
Sat Mar 24 00:38:55 CET 2007


Hallo,

Anyone have got this to work?

Best Regards
Magnus


----Ursprungligt meddelande-----
From: magnus at rotmark.se
Date: Wed, 21 Mar 2007 20:57:10 +0100
To: linux-dvb at linuxtv.org
Subject: [linux-dvb] About TT-3200

> Hallo,
> 
> I have a TT-3200 card and trying to get it work in Linux (for running with Myth).
> 
> With some search around I found that Manu has a stb0899 drivers that should do the job. 
> I suceeded to compiled it and are able to load the drivers (and it found the card). But when running scan it found nothing, and are throw alot of errors in dmesg (se below). Im are running 2.6.16.13 and stb0899-c5
> 
> Anyone with any suggestions?
> 
> Best Regards
> Magnus
> 
> 
> media:~# modprobe budget-av
> 
> saa7146: register extension 'budget_av'.
> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 193
> saa7146: found saa7146 @ mem e088a000 (revision 1, irq 193) (0x13c2,0x1019).
> saa7146 (0): dma buffer size 192512
> DVB: registering new adapter (Technotrend S2-3200).
> adapter has MAC addr = 00:d0:5c:0b:a8:33
> KNC1-0: MAC addr = ff:ff:ff:ff:ff:ff
> stb0899_write_regs [0xf1b6]: 02
> stb0899_write_regs [0xf1c2]: 00
> stb0899_write_regs [0xf1c3]: 00
> stb0899_read_reg: Reg=[0xf000], data=81
> stb0899_get_dev_id: Device ID=[8], Release=[1]
> stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431]
> stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001]
> stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
> stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331]
> stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001]
> stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
> stb0899_attach: Attaching STB0899
> frontend_init: demod_name=STB0899 Multistandard
> DVB: registering frontend 0 (STB0899 Multistandard)...
> budget-av: ci interface initialised.
> budget-av: cam inserted B
> 
> 
> media:~# scan Sirius-5.0E
> scanning Sirius-5.0E
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 11823000 V 27500000 3
> initial transponder 11977000 V 27500000 3
> initial transponder 12054000 V 27500000 3
> >>> tune to: 11823:v:0:27500
> 
> 
> dmesg
> ...
> stb0899_write_regs [0xf1c2]: 20
> stb0899_write_regs: Reg=[0xf1c2], Data=[0x20 ...], Count=1, Status=-121
> stb0899_write_regs [0xf1c3]: 00
> stb0899_write_regs: Reg=[0xf1c3], Data=[0x00 ...], Count=1, Status=-121
> stb0899_write_regs [0xf200]: 00
> stb0899_read_reg: Read error, Reg=[0xf2ff], Status=-121
> stb0899_write_regs: Reg=[0xf200], Data=[0x00 ...], Count=1, Status=-121
> stb0899_write_regs [0xf201]: 0a
> stb0899_read_reg: Read error, Reg=[0xf2ff], Status=-121
> stb0899_write_regs: Reg=[0xf201], Data=[0x0a ...], Count=1, Status=-121
> stb0899_init: init S2 demod
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf300], Data=[0x00000103]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf300], Data=[0x00000103], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf304], Data=[0x3ed1da56]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf304], Data=[0x3ed1da56], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf308], Data=[0x00004000]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf308], Data=[0x00004000], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf30c], Data=[0x00002ade]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf30c], Data=[0x00002ade], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf310], Data=[0x000001bc]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf310], Data=[0x000001bc], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf314], Data=[0x00000200]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf314], Data=[0x00000200], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf31c], Data=[0x0000000f]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf31c], Data=[0x0000000f], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf320], Data=[0x03fb4a20]
> stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf320], Data=[0x03fb4a20], status=-121
> stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf324], Data=[0x00200c97]
> ...
> 
> 
> 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb



More information about the linux-dvb mailing list