[linux-dvb] Need help in setting up my kworld nb 220 card on ubuntu 7.10
ying lcs
yinglcs at gmail.com
Sat Nov 10 20:45:11 CET 2007
Hi,
I am trying to setup my kworld nb 220 tv card in ubuntu 7.10.
I have read http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
But I find out that my /dev/dvb/adapter* is empty.
Here is the result of the command 'lsmod', 'dmesg', 'lspci -v'.
Please advice what should I do to setup my video card to watch TV
under ubuntu 7.10.
$ lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub (rev 03)
Subsystem: Lenovo Unknown device 2015
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ee100000-ee1fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Capabilities: <access denied>
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at ee400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: ee000000-ee0fffff
Capabilities: <access denied>
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00005fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
Capabilities: <access denied>
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
Capabilities: <access denied>
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: ea000000-ebffffff
Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1800 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 1820 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1840 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1860 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 0, IRQ 21
Memory at ee404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 0000a000-0000dfff
Memory behind bridge: e4300000-e7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Thinkpad R60e model 0657
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1880 [size=16]
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family)
SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Thinkpad R60e model 0657
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at 18c8 [size=8]
I/O ports at 18ac [size=4]
I/O ports at 18c0 [size=8]
I/O ports at 18a8 [size=4]
I/O ports at 18b0 [size=16]
Memory at ee404400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: medium devsel, IRQ 11
I/O ports at 18e0 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility X1400 (prog-if 00 [VGA])
Subsystem: Lenovo Unknown device 2006
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 2000 [size=256]
Memory at ee100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at ee120000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet
Controller
Subsystem: Lenovo ThinkPad T60
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 3000 [size=32]
Capabilities: <access denied>
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
Network Connection (rev 02)
Subsystem: Intel Corporation Unknown device 1010
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Subsystem: Lenovo ThinkPad T60/R60 series
Flags: bus master, medium devsel, latency 168, IRQ 16
Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: e0000000-e3fff000 (prefetchable)
Memory window 1: c4000000-c7fff000
I/O window 0: 0000a000-0000a0ff
I/O window 1: 0000a400-0000a4ff
16-bit legacy interface ports at 0001
16:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
Video Broadcast Decoder (rev f0)
Subsystem: KWorld Computer Co. Ltd. Unknown device 7203
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at c4000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
$ lsmod
Module Size Used by
binfmt_misc 12936 1
thinkpad_acpi 44588 0
fglrx 656352 54
ppdev 10244 0
acpi_cpufreq 10568 1
cpufreq_userspace 5280 0
cpufreq_stats 7232 0
cpufreq_ondemand 9612 1
freq_table 5792 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 8072 0
cpufreq_powersave 2688 0
sbs 19592 0
button 8976 0
ac 6148 0
video 18060 0
container 5504 0
battery 11012 0
bay 6912 0
dock 10656 1 bay
nls_iso8859_1 5120 1
nls_cp437 6784 1
vfat 14080 1
fat 54300 1 vfat
ipv6 273892 14
parport_pc 37412 0
lp 12580 0
parport 37448 3 ppdev,parport_pc,lp
saa7134_alsa 15392 0
saa7134 129100 1 saa7134_alsa
video_buf 26244 2 saa7134_alsa,saa7134
compat_ioctl32 2304 1 saa7134
ir_kbd_i2c 9872 1 saa7134
i2c_core 26112 2 saa7134,ir_kbd_i2c
ir_common 35460 2 saa7134,ir_kbd_i2c
videodev 29312 1 saa7134
v4l2_common 18432 2 saa7134,videodev
v4l1_compat 15364 2 saa7134,videodev
snd_hda_intel 263712 3
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 4 saa7134_alsa,snd_hda_intel,snd_pcm_oss
snd_seq_dummy 4740 0
pcmcia 41388 0
snd_seq_oss 33152 0
xpad 9988 0
joydev 11328 0
irtty_sir 9856 0
sir_dev 17412 1 irtty_sir
nsc_ircc 24336 0
snd_seq_midi 9600 0
hci_usb 18332 0
snd_rawmidi 25728 1 snd_seq_midi
irda 202300 3 irtty_sir,sir_dev,nsc_ircc
ipw3945 119840 1
af_packet 24840 2
bluetooth 57060 1 hci_usb
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
crc_ccitt 3072 1 irda
ieee80211 35656 1 ipw3945
ieee80211_crypt 7040 1 ieee80211
yenta_socket 27532 2
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 40980 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_seq 53232 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 3 snd_pcm,snd_seq
snd_seq_device 9228 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
iTCO_wdt 11940 0
iTCO_vendor_support 4868 1 iTCO_wdt
psmouse 39952 0
serio_raw 8068 0
snd 54660 14
saa7134_alsa,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
intel_agp 25620 0
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
shpchp 34580 0
pci_hotplug 32704 1 shpchp
agpgart 35016 2 fglrx,intel_agp
evdev 11136 7
ext3 133896 4
jbd 60456 1 ext3
mbcache 9732 1 ext3
usbhid 29536 0
hid 28928 1 usbhid
sg 36764 0
ata_piix 17540 2
sd_mod 30336 10
e1000 126272 0
ata_generic 8452 0
ehci_hcd 36492 0
ahci 23300 6
libata 125168 3 ata_piix,ata_generic,ahci
scsi_mod 147084 3 sg,sd_mod,libata
uhci_hcd 26640 0
usbcore 138632 6 xpad,hci_usb,usbhid,ehci_hcd,uhci_hcd
thermal 14344 0
processor 32072 2 acpi_cpufreq,thermal
fan 5764 0
fuse 47124 3
apparmor 40728 0
commoncap 8320 1 apparmor
$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd at palmer) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP
Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6820
[ 0.000000] Entering add_active_range(0, 0, 786128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 786128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 786128
[ 0.000000] On node 0 totalpages: 786128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4349 pages used for memmap
[ 0.000000] HighMem zone: 552403 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F67E0 checksum 0
[ 0.000000] ACPI: RSDP 000F67E0, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT BFED1599, 0084 (r1 LENOVO TP-79 2060
LTP 0)
[ 0.000000] ACPI: FACP BFED1700, 00F4 (r3 LENOVO TP-79 2060
LNVO 1)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block"
has zero address or length: 000000000000102C/0 [20070126]
[ 0.000000] ACPI: DSDT BFED1B32, D29A (r1 LENOVO TP-79 2060
MSFT 100000E)
[ 0.000000] ACPI: FACS BFEF4000, 0040
[ 0.000000] ACPI: SSDT BFED18B4, 027E (r1 LENOVO TP-79 2060
MSFT 100000E)
[ 0.000000] ACPI: ECDT BFEDEDCC, 0052 (r1 LENOVO TP-79 2060
LNVO 1)
[ 0.000000] ACPI: TCPA BFEDEE1E, 0032 (r2 LENOVO TP-79 2060
LNVO 1)
[ 0.000000] ACPI: APIC BFEDEE50, 0068 (r1 LENOVO TP-79 2060
LNVO 1)
[ 0.000000] ACPI: MCFG BFEDEEB8, 003C (r1 LENOVO TP-79 2060
LNVO 1)
[ 0.000000] ACPI: HPET BFEDEEF4, 0038 (r1 LENOVO TP-79 2060
LNVO 1)
[ 0.000000] ACPI: BOOT BFEDEFD8, 0028 (r1 LENOVO TP-79 2060
LTP 1)
[ 0.000000] ACPI: SSDT BFEF2697, 025F (r1 LENOVO TP-79 2060
INTL 20050513)
[ 0.000000] ACPI: SSDT BFEF28F6, 00A6 (r1 LENOVO TP-79 2060
INTL 20050513)
[ 0.000000] ACPI: SSDT BFEF299C, 04F7 (r1 LENOVO TP-79 2060
INTL 20050513)
[ 0.000000] ACPI: SSDT BFEF2E93, 01D8 (r1 LENOVO TP-79 2060
INTL 20050513)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap:
c0000000:30000000)
[ 0.000000] Built 1 zonelists. Total pages: 779987
[ 0.000000] Kernel command line:
root=UUID=ee7b84cb-dbae-469a-a616-22e965ed56cc ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.176 MHz processor.
[ 13.820664] Console: colour VGA+ 80x25
[ 13.820907] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.821225] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.001833] Memory: 3106692k/3144512k available (2015k kernel code,
36452k reserved, 916k data, 364k init, 2227008k highmem)
[ 14.001843] virtual kernel memory layout:
[ 14.001844] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.001845] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.001846] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.001847] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.001848] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.001849] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 14.001850] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 14.001853] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 14.001888] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 14.002016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 14.002021] hpet0: 3 64-bit timers, 14318180 Hz
[ 14.082997] Calibrating delay using timer specific routine..
3994.37 BogoMIPS (lpj=7988752)
[ 14.083019] Security Framework v1.0.0 initialized
[ 14.083027] SELinux: Disabled at boot.
[ 14.083039] Mount-cache hash table entries: 512
[ 14.083156] CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000
[ 14.083164] monitor/mwait feature present.
[ 14.083166] using mwait in idle threads.
[ 14.083169] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.083172] CPU: L2 cache: 2048K
[ 14.083174] CPU: Physical Processor ID: 0
[ 14.083176] CPU: Processor Core ID: 0
[ 14.083177] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c1a9 00000000 00000000
[ 14.083186] Compat vDSO mapped to ffffe000.
[ 14.083197] Checking 'hlt' instruction... OK.
[ 14.099101] SMP alternatives: switching to UP code
[ 14.099526] Early unpacking initramfs... done
[ 14.392507] ACPI: Core revision 20070126
[ 14.392596] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 14.420010] CPU0: Intel(R) Core(TM) Duo CPU T2500 @ 2.00GHz stepping 0c
[ 14.420025] SMP alternatives: switching to SMP code
[ 14.420128] Booting processor 1/1 eip 3000
[ 14.430607] Initializing CPU#1
[ 14.511038] Calibrating delay using timer specific routine..
3990.04 BogoMIPS (lpj=7980085)
[ 14.511044] CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000
[ 14.511049] monitor/mwait feature present.
[ 14.511052] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.511053] CPU: L2 cache: 2048K
[ 14.511055] CPU: Physical Processor ID: 0
[ 14.511057] CPU: Processor Core ID: 1
[ 14.511058] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c1a9 00000000 00000000
[ 14.511252] CPU1: Intel(R) Core(TM) Duo CPU T2500 @ 2.00GHz stepping 0c
[ 14.511275] Total of 2 processors activated (7984.41 BogoMIPS).
[ 14.511470] ENABLING IO-APIC IRQs
[ 14.511674] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.658755] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 14.678752] Measured 568596 cycles TSC warp between CPUs, turning
off TSC clock.
[ 0.528000] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 0.532000] Brought up 2 CPUs
[ 0.616000] migration_cost=4000
[ 0.616000] Booting paravirtualized kernel on bare hardware
[ 0.616000] Time: 9:02:45 Date: 10/10/107
[ 0.616000] NET: Registered protocol family 16
[ 0.616000] EISA bus registered
[ 0.616000] ACPI: bus type pci registered
[ 0.616000] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24
[ 0.616000] PCI: Using configuration type 1
[ 0.616000] Setting up standard PCI resources
[ 0.620000] ACPI: EC: Found ECDT
[ 0.628000] ACPI: Interpreter enabled
[ 0.628000] ACPI: (supports S0 S3 S4 S5)
[ 0.628000] ACPI: Using IOAPIC for interrupt routing
[ 0.636000] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 0.636000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.636000] PCI: Probing PCI hardware (bus 00)
[ 0.636000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.636000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.636000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.636000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.636000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.636000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.636000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.640000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.640000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.640000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.640000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.640000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.640000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.640000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.640000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.640000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.644000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.644000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.644000] ACPI: Power Resource [PUBS] (on)
[ 0.644000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.644000] pnp: PnP ACPI init
[ 0.644000] ACPI: bus type pnp registered
[ 0.648000] pnp: PnP ACPI: found 12 devices
[ 0.648000] ACPI: ACPI bus type pnp unregistered
[ 0.648000] PnPBIOS: Disabled by ACPI PNP
[ 0.648000] PCI: Using ACPI for IRQ routing
[ 0.648000] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 0.700000] NET: Registered protocol family 8
[ 0.700000] NET: Registered protocol family 20
[ 0.700000] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.700000] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.700000] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.700000] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.700000] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not
be reserved
[ 0.700000] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not
be reserved
[ 0.700000] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not
be reserved
[ 0.700000] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not
be reserved
[ 0.704000] Time: hpet clocksource has been installed.
[ 0.704000] Switched to high resolution mode on CPU 0
[ 0.704000] Switched to high resolution mode on CPU 1
[ 0.732000] PCI: Bridge: 0000:00:01.0
[ 0.732000] IO window: 2000-2fff
[ 0.732000] MEM window: ee100000-ee1fffff
[ 0.732000] PREFETCH window: d8000000-dfffffff
[ 0.732000] PCI: Bridge: 0000:00:1c.0
[ 0.732000] IO window: 3000-3fff
[ 0.732000] MEM window: ee000000-ee0fffff
[ 0.732000] PREFETCH window: disabled.
[ 0.732000] PCI: Bridge: 0000:00:1c.1
[ 0.732000] IO window: 4000-5fff
[ 0.732000] MEM window: ec000000-edffffff
[ 0.732000] PREFETCH window: e4000000-e40fffff
[ 0.732000] PCI: Bridge: 0000:00:1c.2
[ 0.732000] IO window: 6000-7fff
[ 0.732000] MEM window: e8000000-e9ffffff
[ 0.732000] PREFETCH window: e4100000-e41fffff
[ 0.732000] PCI: Bridge: 0000:00:1c.3
[ 0.732000] IO window: 8000-9fff
[ 0.732000] MEM window: ea000000-ebffffff
[ 0.732000] PREFETCH window: e4200000-e42fffff
[ 0.732000] PCI: Bus 22, cardbus bridge: 0000:15:00.0
[ 0.732000] IO window: 0000a000-0000a0ff
[ 0.732000] IO window: 0000a400-0000a4ff
[ 0.732000] PREFETCH window: e0000000-e3ffffff
[ 0.732000] MEM window: c4000000-c7ffffff
[ 0.732000] PCI: Bridge: 0000:00:1e.0
[ 0.732000] IO window: a000-dfff
[ 0.732000] MEM window: e4300000-e7ffffff
[ 0.732000] PREFETCH window: e0000000-e3ffffff
[ 0.732000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 0.732000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.732000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level,
low) -> IRQ 17
[ 0.732000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.732000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level,
low) -> IRQ 18
[ 0.732000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.732000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level,
low) -> IRQ 19
[ 0.732000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.732000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level,
low) -> IRQ 20
[ 0.732000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.732000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
[ 0.732000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.732000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 0.732000] NET: Registered protocol family 2
[ 0.772000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.772000] TCP established hash table entries: 131072 (order: 8,
1572864 bytes)
[ 0.772000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.772000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.772000] TCP reno registered
[ 0.788000] checking if image is initramfs... it is
[ 1.368000] Freeing initrd memory: 7113k freed
[ 1.368000] Simple Boot Flag at 0x35 set to 0x1
[ 1.368000] audit: initializing netlink socket (disabled)
[ 1.368000] audit(1194685365.204:1): initialized
[ 1.368000] highmem bounce pool size: 64 pages
[ 1.372000] VFS: Disk quotas dquot_6.5.1
[ 1.372000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.372000] io scheduler noop registered
[ 1.372000] io scheduler anticipatory registered
[ 1.372000] io scheduler deadline registered
[ 1.372000] io scheduler cfq registered (default)
[ 1.372000] Boot video device is 0000:01:00.0
[ 1.372000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.372000] assign_interrupt_mode Found MSI capability
[ 1.372000] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.372000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.372000] assign_interrupt_mode Found MSI capability
[ 1.372000] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.372000] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.372000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.372000] assign_interrupt_mode Found MSI capability
[ 1.372000] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.372000] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.372000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.372000] assign_interrupt_mode Found MSI capability
[ 1.372000] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.372000] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.372000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.372000] assign_interrupt_mode Found MSI capability
[ 1.372000] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.372000] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.372000] isapnp: Scanning for PnP cards...
[ 1.728000] isapnp: No Plug & Play device found
[ 1.748000] Real Time Clock Driver v1.12ac
[ 1.748000] hpet_resources: 0xfed00000 is busy
[ 1.748000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 1.748000] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 1.748000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.748000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 1.756000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.756000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.756000] mice: PS/2 mouse device common for all mice
[ 1.756000] EISA: Probing bus 0 at eisa.0
[ 1.756000] Cannot allocate resource for EISA slot 1
[ 1.756000] Cannot allocate resource for EISA slot 2
[ 1.756000] Cannot allocate resource for EISA slot 3
[ 1.756000] Cannot allocate resource for EISA slot 4
[ 1.756000] Cannot allocate resource for EISA slot 5
[ 1.756000] Cannot allocate resource for EISA slot 6
[ 1.756000] Cannot allocate resource for EISA slot 7
[ 1.756000] Cannot allocate resource for EISA slot 8
[ 1.756000] EISA: Detected 0 cards.
[ 1.756000] TCP cubic registered
[ 1.756000] NET: Registered protocol family 1
[ 1.756000] Using IPI No-Shortcut mode
[ 1.756000] Magic number: 15:694:19
[ 1.756000] Freeing unused kernel memory: 364k freed
[ 1.764000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.928000] AppArmor: AppArmor
initialized<5>audit(1194685366.704:2): type=1505 info="AppArmor
initialized" pid=1239
[ 2.932000] fuse init (API version 7.8)
[ 2.936000] Failure registering capabilities with primary security module.
[ 2.964000] ACPI: SSDT BFEF1D36, 0282 (r1 PmRef Cpu0Ist 100
INTL 20050513)
[ 2.964000] ACPI: SSDT BFEF203D, 065A (r1 PmRef Cpu0Cst 100
INTL 20050513)
[ 2.964000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.964000] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.964000] ACPI: SSDT BFEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100
INTL 20050513)
[ 2.968000] ACPI: SSDT BFEF1FB8, 0085 (r1 PmRef Cpu1Cst 100
INTL 20050513)
[ 2.968000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.968000] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.968000] ACPI: Thermal Zone [THM0] (41 C)
[ 2.968000] ACPI: Thermal Zone [THM1] (37 C)
[ 3.372000] usbcore: registered new interface driver usbfs
[ 3.372000] usbcore: registered new interface driver hub
[ 3.372000] usbcore: registered new device driver usb
[ 3.372000] USB Universal Host Controller Interface driver v3.0
[ 3.372000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 3.372000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.372000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.372000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 3.372000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 3.372000] usb usb1: configuration #1 chosen from 1 choice
[ 3.372000] hub 1-0:1.0: USB hub found
[ 3.372000] hub 1-0:1.0: 2 ports detected
[ 3.380000] SCSI subsystem initialized
[ 3.384000] libata version 2.21 loaded.
[ 3.432000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 3.432000] Copyright (c) 1999-2006 Intel Corporation.
[ 3.476000] ahci 0000:00:1f.2: version 2.2
[ 3.476000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level,
low) -> IRQ 16
[ 3.716000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 3.900000] usb 1-2: configuration #1 chosen from 1 choice
[ 4.000000] Clocksource tsc unstable (delta = -429872162 ns)
[ 4.480000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5
Gbps 0xf impl SATA mode
[ 4.480000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 4.480000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.480000] scsi0 : ahci
[ 4.480000] scsi1 : ahci
[ 4.480000] scsi2 : ahci
[ 4.480000] scsi3 : ahci
[ 4.480000] ata1: SATA max UDMA/133 cmd 0xf8884500 ctl 0x00000000
bmdma 0x00000000 irq 16
[ 4.480000] ata2: SATA max UDMA/133 cmd 0xf8884580 ctl 0x00000000
bmdma 0x00000000 irq 16
[ 4.480000] ata3: SATA max UDMA/133 cmd 0xf8884600 ctl 0x00000000
bmdma 0x00000000 irq 16
[ 4.480000] ata4: SATA max UDMA/133 cmd 0xf8884680 ctl 0x00000000
bmdma 0x00000000 irq 16
[ 4.980000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.984000] ata1.00: ATA-7: HTS721010G9SA00, MCZIC10V, max UDMA/100
[ 4.984000] ata1.00: 195371568 sectors, multi 16: LBA48
[ 4.984000] ata1.00: configured for UDMA/100
[ 5.324000] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.644000] ata3: SATA link down (SStatus 0 SControl 0)
[ 5.964000] ata4: SATA link down (SStatus 0 SControl 0)
[ 5.964000] scsi 0:0:0:0: Direct-Access ATA
HTS721010G9SA00 MCZI PQ: 0 ANSI: 5
[ 5.964000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level,
low) -> IRQ 21
[ 5.964000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.964000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.964000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 5.964000] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.964000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 5.964000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xee404000
[ 5.968000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 5.968000] usb usb2: configuration #1 chosen from 1 choice
[ 5.968000] hub 2-0:1.0: USB hub found
[ 5.968000] hub 2-0:1.0: 8 ports detected
[ 5.972000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 5.972000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.972000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.972000] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.972000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 5.972000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.972000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.972000] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.972000] sda:<6>usb 1-2: USB disconnect, address 2
[ 6.072000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level,
low) -> IRQ 22
[ 6.072000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 6.072000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.072000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 6.072000] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001820
[ 6.072000] usb usb3: configuration #1 chosen from 1 choice
[ 6.072000] hub 3-0:1.0: USB hub found
[ 6.072000] hub 3-0:1.0: 2 ports detected
[ 6.176000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 23
[ 6.176000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 6.176000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.176000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 6.176000] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001840
[ 6.176000] usb usb4: configuration #1 chosen from 1 choice
[ 6.176000] hub 4-0:1.0: USB hub found
[ 6.176000] hub 4-0:1.0: 2 ports detected
[ 6.280000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level,
low) -> IRQ 21
[ 6.280000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 6.280000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.280000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 6.280000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
[ 6.280000] usb usb5: configuration #1 chosen from 1 choice
[ 6.280000] hub 5-0:1.0: USB hub found
[ 6.280000] hub 5-0:1.0: 2 ports detected
[ 6.300000] sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
[ 6.348000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.352000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.384000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 6.384000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 6.440000] e1000: 0000:02:00.0: e1000_probe: (PCI
Express:2.5Gb/s:Width x1) 00:15:58:7d:61:d4
[ 6.500000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 6.500000] ata_piix 0000:00:1f.1: version 2.11
[ 6.500000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level,
low) -> IRQ 16
[ 6.500000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.500000] scsi4 : ata_piix
[ 6.500000] scsi5 : ata_piix
[ 6.500000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x00011880 irq 14
[ 6.500000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376
bmdma 0x00011888 irq 15
[ 6.664000] ata5.00: ATA-6: HTS541060G9AT00, MB3IA60A, max UDMA/100
[ 6.664000] ata5.00: 117210240 sectors, multi 16: LBA
[ 6.680000] ata5.00: configured for UDMA/100
[ 6.680000] ata6: port disabled. ignoring.
[ 6.680000] scsi 4:0:0:0: Direct-Access ATA
HTS541060G9AT00 MB3I PQ: 0 ANSI: 5
[ 6.680000] sd 4:0:0:0: [sdb] 117210240 512-byte hardware sectors (60012 MB)
[ 6.680000] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.680000] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.680000] sd 4:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.680000] sd 4:0:0:0: [sdb] 117210240 512-byte hardware sectors (60012 MB)
[ 6.680000] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.680000] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.680000] sd 4:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.680000] sdb: sdb1 sdb2
[ 6.696000] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 6.696000] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.904000] Attempting manual resume
[ 6.904000] swsusp: Resume From Partition 8:17
[ 6.904000] PM: Checking swsusp image.
[ 6.904000] PM: Resume from disk failed.
[ 6.936000] kjournald starting. Commit interval 5 seconds
[ 6.936000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.052000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 7.220000] usb 5-1: configuration #1 chosen from 1 choice
[ 7.464000] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 7.640000] usb 5-2: configuration #1 chosen from 1 choice
[ 7.640000] usbcore: registered new interface driver hiddev
[ 7.880000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 8.064000] usb 1-2: configuration #1 chosen from 1 choice
[ 8.080000] input: Microsft Microsoft Wireless Desktop Receiver 3.1
as /class/input/input2
[ 8.080000] input: USB HID v1.11 Keyboard [Microsft Microsoft
Wireless Desktop Receiver 3.1] on usb-0000:00:1d.0-2
[ 8.224000] input: Microsft Microsoft Wireless Desktop Receiver 3.1
as /class/input/input3
[ 8.224000] input: USB HID v1.11 Mouse [Microsft Microsoft Wireless
Desktop Receiver 3.1] on usb-0000:00:1d.0-2
[ 8.224000] usbcore: registered new interface driver usbhid
[ 8.224000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 16.992000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps
Full Duplex, Flow Control: RX
[ 16.992000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 17.680000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.740000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.744000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.100000] input: PC Speaker as /class/input/input4
[ 18.120000] iTCO_vendor_support: vendor-support=0
[ 18.168000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 18.364000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
[ 18.364000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 18.364000] Yenta: Routing CardBus interrupts to PCI
[ 18.364000] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
[ 18.484000] ieee80211_crypt: registered algorithm 'NULL'
[ 18.496000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 18.496000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
[ 18.596000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 18.596000] Socket status: 30000020
[ 18.596000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
[ 18.596000] cs: IO port probe 0xa000-0xdfff: clean.
[ 18.596000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[ 18.596000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[ 18.612000] Bluetooth: Core ver 2.11
[ 18.612000] NET: Registered protocol family 31
[ 18.612000] Bluetooth: HCI device and connection manager initialized
[ 18.612000] Bluetooth: HCI socket layer initialized
[ 18.644000] NET: Registered protocol family 17
[ 18.664000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection
driver for Linux, 1.2.2mp.ubuntu1
[ 18.664000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 18.664000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level,
low) -> IRQ 22
[ 18.664000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 18.664000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 18.716000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1,
caps: 0xa04793/0x300000
[ 18.716000] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 18.756000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 18.760000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 18.760000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.824000] irda_init()
[ 18.824000] NET: Registered protocol family 23
[ 18.880000] Bluetooth: HCI USB driver ver 2.9
[ 18.888000] usbcore: registered new interface driver hci_usb
[ 18.928000] pnp: Device 00:0a activated.
[ 18.928000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ;
irq 3 ; dma 1.
[ 18.928000] nsc-ircc, chip->init
[ 18.928000] nsc-ircc, Found chip at base=0x164e
[ 18.928000] nsc-ircc, driver loaded (Dag Brattli)
[ 18.928000] IrDA: Registered device irda0
[ 18.928000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 18.988000] intel_rng: FWH not detected
[ 19.024000] usbcore: registered new interface driver xpad
[ 19.024000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c:
driver for Xbox controllers v0.1.6
[ 19.232000] pccard: CardBus card inserted into slot 0
[ 19.232000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level,
low) -> IRQ 22
[ 19.232000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 19.392000] cs: IO port probe 0x100-0x3af: clean.
[ 19.392000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.392000] cs: IO port probe 0x820-0x8ff: clean.
[ 19.396000] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.396000] cs: IO port probe 0xa00-0xaff: clean.
[ 19.412000] Linux video capture interface: v2.00
[ 19.544000] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 19.548000] PCI: Enabling device 0000:16:00.0 (0000 -> 0002)
[ 19.548000] ACPI: PCI Interrupt 0000:16:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 19.548000] saa7133[0]: found at 0000:16:00.0, rev: 240, irq: 16,
latency: 0, mmio: 0xc4000000
[ 19.548000] PCI: Setting latency timer of device 0000:16:00.0 to 64
[ 19.548000] saa7133[0]: subsystem: 17de:7203, board:
UNKNOWN/GENERIC [card=0,autodetected]
[ 19.548000] saa7133[0]: board init: gpio is 0
[ 19.684000] saa7133[0]: i2c eeprom 00: de 17 03 72 ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 19.684000] saa7133[0]: registered device video0 [v4l2]
[ 19.684000] saa7133[0]: registered device vbi0
[ 19.696000] saa7134 ALSA driver for DMA sound loaded
[ 19.696000] saa7133[0]/alsa: saa7133[0] at 0xc4000000 irq 16
registered as card -2
[ 19.912000] lp: driver loaded but no devices found
[ 19.960000] Adding 2441840k swap on /dev/sdb1. Priority:-1
extents:1 across:2441840k
[ 19.976000] Adding 2441840k swap on /dev/sda8. Priority:-2
extents:1 across:2441840k
[ 20.396000] EXT3 FS on sdb2, internal journal
[ 20.792000] ipw3945: Detected geography ABG (11 802.11bg channels,
13 802.11a channels)
[ 21.336000] NET: Registered protocol family 10
[ 21.336000] lo: Disabled Privacy Extensions
[ 23.940000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 24.152000] input: TPPS/2 IBM TrackPoint as /class/input/input6
[ 24.404000] kjournald starting. Commit interval 5 seconds
[ 24.416000] EXT3 FS on sda5, internal journal
[ 24.416000] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.444000] kjournald starting. Commit interval 5 seconds
[ 24.444000] EXT3 FS on sda6, internal journal
[ 24.444000] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.472000] kjournald starting. Commit interval 5 seconds
[ 24.472000] EXT3 FS on sda7, internal journal
[ 24.472000] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.564000] ACPI: ACPI Dock Station Driver
[ 25.568000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
[ 25.568000] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
[ 25.568000] ACPI: Error installing bay notify handler
[ 25.568000] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
[ 25.596000] ACPI: Battery Slot [BAT0] (battery present)
[ 25.712000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 25.716000] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 25.736000] ACPI: AC Adapter [AC] (on-line)
[ 25.748000] input: Power Button (FF) as /class/input/input7
[ 25.748000] ACPI: Power Button (FF) [PWRF]
[ 25.748000] input: Lid Switch as /class/input/input8
[ 25.748000] ACPI: Lid Switch [LID]
[ 25.748000] input: Sleep Button (CM) as /class/input/input9
[ 25.748000] ACPI: Sleep Button (CM) [SLPB]
[ 27.560000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 29.636000] ppdev: user-space parallel port driver
[ 30.092000] audit(1194706993.974:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=5374 profile="/usr/sbin/cupsd"
[ 30.136000] apm: BIOS not found.
[ 30.396000] Failure registering capabilities with primary security module.
[ 30.432000] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 30.436000] [fglrx] Maximum main memory to use for locked dma
buffers: 2896 MBytes.
[ 30.436000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 30.640000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 31.388000] eth0: no IPv6 routers present
[ 32.344000] thinkpad_acpi: ThinkPad ACPI Extras v0.14
[ 32.344000] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 32.344000] thinkpad_acpi: ThinkPad EC firmware 79HT50WW-1.07
[ 32.716000] [fglrx] total GART = 130023424
[ 32.716000] [fglrx] free GART = 114032640
[ 32.716000] [fglrx] max single GART = 114032640
[ 32.716000] [fglrx] total LFB = 134086656
[ 32.716000] [fglrx] free LFB = 114143232
[ 32.716000] [fglrx] max single LFB = 114143232
[ 32.716000] [fglrx] total Inv = 0
[ 32.716000] [fglrx] free Inv = 0
[ 32.716000] [fglrx] max single Inv = 0
[ 32.716000] [fglrx] total TIM = 0
More information about the linux-dvb
mailing list