[linux-dvb] TT3200 & Error with new dvb-s2 drivers - No LNBP21 found!

Igor Nikanov goga777 at bk.ru
Mon Oct 1 17:45:24 CEST 2007


In previous posts in the list from Manu we founded advice 
Now is ok.

===========================================
1758 if (lnbp21_attach(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
change it to
 1758 if (!lnbp21_attach(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
===========================================


ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: PC Speaker as /class/input/input2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12ac
saa7146: register extension 'budget_ci dvb'.
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 56073 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 217
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 209
saa7146: found saa7146 @ mem e0806400 (revision 1, irq 209) (0x13c2,0x1019).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
Intel 810 + AC97 Audio, version 1.01, 23:26:00 May  9 2007
adapter has MAC addr = 00:d0:5c:0b:ab:0e
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
_stb0899_read_reg: Reg=[0xf000], data=83
stb0899_get_dev_id: ID reg=[0x83]
stb0899_get_dev_id: Device ID=[8], Release=[3]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x464f4633]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x02020203]
stb0899_get_dev_id: Demodulator Core ID=[FOF3], Version=[33686019]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46474333]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x02020203]
stb0899_get_dev_id: FEC Core ID=[FGC3], Version=[33686019]
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
DVB: registering frontend 0 (STB0899 Multistandard)...






More information about the linux-dvb mailing list