[linux-dvb] Technisat DVB-S2 Skystar HD

Manu Abraham abraham.manu at gmail.com
Tue Oct 2 15:09:59 CEST 2007


Artem Makhutov wrote:
> Hi,
> 
> On Tue, Oct 02, 2007 at 03:51:55PM +0400, Manu Abraham wrote:
>> Artem Makhutov wrote:
>>>> Artem Makhutov wrote:
>>>>> On Tue, Oct 02, 2007 at 03:48:38AM +0400, Manu Abraham wrote:
>>>>>> Artem Makhutov wrote:
>>>>>>> It also does not work with the modified one - I am getting a kernel ooops (see ooops.log.gz).
>>>>>> Please load the stb6100 module also with verbose=5
>>>>>>
>>>>>> so you can do something like this
>>>>>> modprobe stb6100 verbose=5
>>>>>> modprobe stb0899 verbose=5
>>>>>> modprobe budget_ci
>>>>>>
>>>>>> And get the error messages again the same way. Just need the szap and the oops messages.
>>>>> I have attached the new logfiles.
>> [...]
>>
>> In here
>>
>> http://jusst.de/hg/multiproto/file/557067efd932/linux/drivers/media/dvb/ttpci/budget-ci.c
>>
>> Change this
>>
>> 1680struct stb6100_config tt3200_stb6100_config = {
>> 1681 .tuner_address = 0x60
>> 1682};
>>
>>
>> to 
>>
>> struct stb6100_config tt3200_stb6100_config = {
>> 	.tuner_address = 0x60,
>> 	.refclock	= 27000000, 
>> };
>>
>> Please check whether it helps ....
> 
> Yeah, it worked.
> 
> It is possible to tune to DVB-S and DVB-S2 channels.
> 
> The driver has the same issues like the old driver on getting a LOCK
> on both DVB-S and DVB-S2 channels.

In stb0899_drv.c. where you see SearchRange=3MHz, try increasing it to
10MHz and see whether it makes any difference ?

Manu



More information about the linux-dvb mailing list