[linux-dvb] Hauppauge Nova-T stick - no data output from /dev/dvb/adapter0/dvr0

[Ole]

Hi everyone,

I'm trying to get a Hauppauge Nova-T stick working using Ubuntu 7.04.

I have installed the latest cvs drivers (from 2007-10-10) and I'm
using the newest firmware mentioned on the mailing list
(dvb-usb-dib0700-1.10.fw), all to no avail.

Scan gives me no channels even though I know channels exists (see
below). Using a predefined channels.conf I'm able to use tzap to get a
lock on a channel (see below).

However, no matter what I do I am unable to get ANY output from
/dev/dvb/adapter0/dvr0.

cat /dev/dvb/adapter0/dvr0 > test.mpg (while tzap -r is "running")
will give me a zero sized file.

Any suggestions? Is this a bug?


Ole


/dev/dvb/adapter0:
--------
ls -la /dev/dvb/adapter0/
total 0
drwxr-xr-x 2 root root     120 2007-10-11 19:57 .
drwxr-xr-x 3 root root      60 2007-10-11 19:57 ..
crw-rw---- 1 root video 212, 4 2007-10-11 19:57 demux0
crw-rw---- 1 root video 212, 5 2007-10-11 19:57 dvr0
crw-rw---- 1 root video 212, 3 2007-10-11 19:57 frontend0
crw-rw---- 1 root video 212, 7 2007-10-11 19:57 net0

tzap output:
--------
tzap -r DR2
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 714000000 Hz
video pid 0x00d3, audio pid 0x00dd
status 0b | signal 234e | snr 0000 | ber 001fffff | unc 00000000 |
status 1b | signal 21e5 | snr 0000 | ber 001fffff | unc 00000000 | FE_HAS_LOCK
status 1b | signal 2174 | snr 0000 | ber 001fffff | unc 00000000 | FE_HAS_LOCK
status 1b | signal 21f5 | snr 0000 | ber 001fffff | unc 00000000 | FE_HAS_LOCK

channels.conf:
--------
DR2:714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:211:221:102

scan output:
--------
scan .kde/share/apps/kaffeine/dvb-t/dk-CPH
scanning .kde/share/apps/kaffeine/dvb-t/dk-CPH
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 714000000 0 2 9 3 1 3 0
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.


/lib/firmware:
--------
 ls -la /lib/firmware/
total 88
drwxr-xr-x  4 root root  4096 2007-10-11 19:51 .
drwxr-xr-x 16 root root  4096 2007-10-11 00:27 ..
drwxr-xr-x  4 root root  4096 2007-04-15 13:53 2.6.20-15-generic
drwxr-xr-x  4 root root  4096 2007-10-11 00:28 2.6.20-16-generic
lrwxrwxrwx  1 root root    23 2007-10-11 19:51
dvb-usb-dib0700-03-pre1.fw -> dvb-usb-dib0700-1.10.fw
-rw-r--r--  1 root root 33277 2007-10-11 00:33 dvb-usb-dib0700-03-pre1.fw.org
-rw-r--r--  1 root root  34306 2007-09-10 11:09 dvb-usb-dib0700-1.10.fw

dmesg output:
--------
[   15.016000] dib0700: loaded with support for 5 different device-types
[   15.048000] ath_pci: 0.9.4.5 (0.9.3.1)
[   15.052000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level,
low) -> IRQ 16
[   15.052000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   15.500000] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold
state, will try to load a firmware
[   15.584000] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-03-pre1.fw'

[   15.816000] dib0700: firmware started successfully.
[   15.844000] hda_codec: STAC922x, Apple subsys_id=106b0800
[   16.320000] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[   16.320000] dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
[   16.324000] DVB: registering new adapter (Hauppauge Nova-T Stick)
[   16.680000] DVB: registering frontend 0 (DiBcom 7000PC)...
[   16.728000] MT2060: successfully identified (IF1 = 1220)
[   17.256000] input: IR-receiver inside an USB DVB receiver as
/class/input/input7
[   17.256000] dvb-usb: schedule remote query interval to 150 msecs.
[   17.256000] dvb-usb: Hauppauge Nova-T Stick successfully
initialized and connected.
[   17.260000] usbcore: registered new interface driver dvb_usb_dib0700