[linux-dvb] New Card: Compro VideoMate S300/S350 DVB-S

hermann pitton hermann-pitton at arcor.de
Tue Sep 4 06:25:52 CEST 2007


Hi,

Am Montag, den 03.09.2007, 20:29 +0100 schrieb Richard (MQ):
> Thanks Jan,
> 
> I hadn't spotted that, but it makes no difference - even when I add
> "options saa7134 card=72" I get:

the hint was to try with card=71 i think, guess you mean that one.

That won't help either, since according to the eeprom dump you have
something different, looks more like a T220 with tuner pll at 0x62.
The mpeg encoder was also not reported previously.

Why you claim to have a T200? I have seen on analog cards that they had
wrong stickers on the tuner for a while, but in this case, it is hard to
believe, since the sticker of the older can tuner would not even fit on
the shielding of the newer silicon one you seem to have.

Cheers,
Hermann

> > saa7130[0]: found at 0000:00:0c.0, rev: 1, irq: 19, latency: 32, mmio: 0xe2000000
> > saa7130[0]: subsystem: 185b:c901, board: RTD Embedded Technologies VFG7350 [card=72,insmod option]
> > saa7130[0]: board init: gpio is 853f43
> > saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> > saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> > saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
> > saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff
> > saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
> > saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > saa7130[0]: registered device video0 [v4l2]
> > saa7130[0]: registered device vbi0
> > saa7130[0]: registered device video1 [mpeg]
> 
> - but no /dev/dvb or anything below it.
> 
> relevant modules seem to be saa7134, saa7134-dvb, saa7134-empress and
> mt352. Anything missing?
> 
> Any more ideas please? Anyone?!
> -- 
> Cheers
> Richard (MQ)
> 
> Jan D. Louw wrote:
> > Hi Richard,
> > 
> > Looks like your card is forced to the wrong card number. The T200 is 
> > supposed to be auto detected as card #71, but yours was forced to #72 
> > (insmod option). Check your /etc/modprobe.conf or similar file for 
> > something like a 'option saa7134 card=72' statement.
> > 
> > Regards
> > JD
> > 
> > Richard (MQ) wrote:
> >> Jan,
> >>
> >> This is what dmesg has to say about the card on boot:
> >>
> >>> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> >>> saa7130/34: v4l2 driver version 0.2.14 loaded
> >>> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 19
> >>> saa7130[0]: found at 0000:00:0c.0, rev: 1, irq: 19, latency: 32, mmio: 0xe2000000
> >>> saa7130[0]: subsystem: 185b:c901, board: RTD Embedded Technologies VFG7350 [card=72,insmod option]
> >>> saa7130[0]: board init: gpio is 843f00
> >>> saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> >>> saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> >>> saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
> >>> saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >>> saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff
> >>> saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
> >>> saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >>> saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >>> tuner 1-0062: chip found @ 0xc4 (saa7130[0])
> >>> tuner 1-0062: type set to 1 (Philips PAL_I (FI1246 and compatibles))
> >>> tuner 1-0062: type set to 1 (Philips PAL_I (FI1246 and compatibles))
> >>> tuner 1-0063: chip found @ 0xc6 (saa7130[0])
> >>> tuner 1-0068: chip found @ 0xd0 (saa7130[0])
> >>> saa7130[0]: registered device video0 [v4l2]
> >>> saa7130[0]: registered device vbi0
> >>> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
> >>> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
> >>> ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
> >>> PCI: Setting latency timer of device 0000:00:11.5 to 64
> >>> saa7130[0]: registered device video1 [mpeg]
> >> and lsmod (edited):
> >>
> >>> saa7134_empress        25860  0
> >>> snd_via82xx            43800  0
> >>> saa6752hs              26508  0
> >>> tuner                  73640  0
> >>> snd_ac97_codec        109220  1 snd_via82xx
> >>> ac97_bus               18560  1 snd_ac97_codec
> >>> snd_pcm                94212  3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
> >>> snd_timer              38788  2 snd_seq,snd_pcm
> >>> snd_page_alloc         26248  2 snd_via82xx,snd_pcm
> >>> saa7134               137164  1 saa7134_empress
> >>> shpchp                 47380  0
> >>> pci_hotplug            45504  1 shpchp
> >>> snd_mpu401             25100  0
> >>> snd_mpu401_uart        24704  2 snd_via82xx,snd_mpu401
> >>> snd_rawmidi            40320  2 snd_seq_midi,snd_mpu401_uart
> >>> video_buf              39940  2 saa7134_empress,saa7134
> >>> snd_seq_device         24460  3 snd_seq_midi,snd_seq,snd_rawmidi
> >>> compat_ioctl32         17664  1 saa7134
> >>> ir_kbd_i2c             24976  1 saa7134
> >>> ir_common              50436  2 saa7134,ir_kbd_i2c
> >>> videodev               42752  2 saa7134_empress,saa7134
> >>> v4l2_common            32896  4 saa7134_empress,tuner,saa7134,videodev
> >>> v4l1_compat            28676  2 saa7134,videodev
> >>> i2c_core               39808  5 saa6752hs,tuner,saa7134,ir_kbd_i2c,i2c_viapro
> >> I have an MT352 on the board - it's clearly marked - but no sign of a
> >> module for it? Unless saa6752hs is something to do with it?
> >>
> >> As you say, we both need someone more knowledgeable to comment on this...
> >>
> > 
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > 
> > 
> 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb




More information about the linux-dvb mailing list