[linux-dvb] Asys P7131 Hybrid: DVB out of range

[Paolo Dell'Aquila]

This morning I upgraded the kernel of my linux box.
After that I cloned v4l-dvb and compiled everything. I've done it
because couldn't watch digital tv with mplayer but only with
kaffeine.
Mplayer error was:
vb_streaming_read, attempt N. 6 failed with errno 0 when reading ...

So I tried to update bit I didn't solve the problem.


Than  I've done some test with Mythtv and auto-scanning
for channels... and now...

...now I'm having the following (BIG) problem:
dvb-t doesn't work anymore (also in kaffeiene or tzap).

dmesg has the following error:
DVB: frontend 0 frequency 2147483647 out of range (51000000..858000000)

After this mess up, analogical TV is no more properly working, before 
was really perfect.

Going crazy...


thank you for your help.


P.S.
I would like to know is some of you could use a patch cable between 
P7131 and motherboard for listen TV. I've tried sever time but no sound 
at all and I have to use sox or aplay.


Some information about my system:
SO: Ubuntu 7.07 - Linux linux 2.6.20-16-generic

dmesg:
[...]
[   18.020064] saa7130/34: v4l2 driver version 0.2.14 loaded
[   18.020132] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, 
low) -> IRQ 17
[   18.020144] saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 17, 
latency: 64, mmio: 0xcdcff800
[   18.020152] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 
Hybrid [card=112,autodetected]
[   18.020163] saa7133[0]: board init: gpio is 200000
[   18.020239] input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4
[   18.054492] intel_rng: FWH not detected
[   18.148302] nvidia: module license 'NVIDIA' taints kernel.
[   18.155554] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 
a9 1c 55 d2 b2 92
[   18.155568] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff 
ff ff ff ff ff ff
[   18.155581] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 
00 d5 ff ff ff ff
[   18.155593] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[   18.155605] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 
ff ff ff ff ff ff
[   18.155617] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[   18.155630] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[   18.155642] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[   18.562616] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[   18.610496] tda8290 0-004b: setting tuner address to 61
[   18.611021] NET: Registered protocol family 17
[   18.714276] tuner 0-004b: type set to tda8290+75a
[   18.762213] tda8290 0-004b: setting tuner address to 61
[   18.866006] tuner 0-004b: type set to tda8290+75a
[   18.873190] saa7133[0]: registered device video0 [v4l2]
[   18.873229] saa7133[0]: registered device vbi0
[   18.873256] saa7133[0]: registered device radio0
[   18.873732] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, 
low) -> IRQ 16
[   18.873766] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   18.911272] saa7134 ALSA driver for DMA sound loaded
[   18.911615] saa7133[0]/alsa: saa7133[0] at 0xcdcff800 irq 17 
registered as card -2
[   19.051812] DVB: registering new adapter (saa7133[0])
[   19.051821] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[   19.121478] tda1004x: setting up plls for 48MHz sampling clock
[   19.141824] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, 
low) -> IRQ 16
[   19.141839] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   19.141970] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755 
Mon Feb 26 23:21:15 PST 2007
[   19.404784] tda1004x: found firmware revision 29 -- ok
[...]
[   49.092508] tda1004x: setting up plls for 48MHz sampling clock
[   49.455718] tda1004x: found firmware revision 29 -- ok
[   49.796042] DVB: frontend 0 frequency 2147483647 out of range 
(51000000..858000000)
[   49.834811] DVB: frontend 0 frequency 2147483647 out of range 
(51000000..858000000)