[linux-dvb] Compro Videomate U300 (same as U500) DiB0700

Daniel Klose kloskillah at gmx.net
Tue Sep 18 12:58:53 CEST 2007


Rainer Schubert schrieb:
>
>> However i"m a bit confused with the wiki and the different DiB0700
>> <http://www.linuxtv.org/wiki/index.php?title=DiB0700&action=edit>
>> Firmwares. I"m using Ubuntu Feisty Fawn and copied the firmware
>> http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-03-pre1.fw 
>>
>> into the following folder: /lib/firmware/2.6.20-16-generic/
>
> I'd suggest that you locate all the folders named "firmware" on
> your system and put a symbolic link there to your firmware file.
>
> /usr/lib/hotplug/firmware
> /lib/firmware
>
> are the candidates for such a link.
>
> Give it a try. Good luck!
>
> Rainer
I used the folder mentioned above for the Afatech 9005. And it worked 
out of the box.
So I'm pretty sure there is no need for putting these files in the other 
folders? Since it has worked before I think, maybe it is the wrong 
firmware. It would be nice to have a statement from the developer of the 
firmware.
Any other ideas ?
Here's what lsusb -v says:
Bus 001 Device 007: ID 185b:1e80 Compro
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 idVendor           0x185b Compro
 idProduct          0x1e80
 bcdDevice            1.00
 iManufacturer           1
 iProduct                2
 iSerial                 3
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           46
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xa0
     (Bus Powered)
     Remote Wakeup
   MaxPower              500mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           4
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass      0
     bInterfaceProtocol      0
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x01  EP 1 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               1
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               1
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               1
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x83  EP 3 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               1
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Thank you Daniel



More information about the linux-dvb mailing list