[linux-dvb] Request for assistance: DViCO FusionHDTV DVB-T NANO

Mark Van De Vyver mvyver at gmail.com
Tue Sep 25 12:01:43 CEST 2007


Hi,
I'd appreciate any help in getting my USB DVB-t stick (DViCO
FusionHDTV DVB-T NANO) to work on opensuse 10.2.

I'm not a linux guru and have worked my way through the web postings
that I can make sense of.
I'm not sure how severe the problem I've run into is:
Is it simple to fix/workaround?  Or should I consider moving on?

I have to plug the USB stick in twice, before I see the following in
/var/log/messages


Sep 25 19:17:03 mv-laptop kernel: usb 1-8: new high speed USB device
using ehci_hcd and address 7
Sep 25 19:17:06 mv-laptop kernel: usb 1-8: device descriptor read/64, error -110
Sep 25 19:18:20 mv-laptop kernel: usb 1-8: new high speed USB device
using ehci_hcd and address 8
Sep 25 19:18:20 mv-laptop kernel: usb 1-8: new device found,
idVendor=0fe9, idProduct=db70
Sep 25 19:18:20 mv-laptop kernel: usb 1-8: new device strings: Mfr=0,
Product=0, SerialNumber=0
Sep 25 19:18:20 mv-laptop kernel: usb 1-8: configuration #1 chosen from 1 choice
Sep 25 19:18:21 mv-laptop kernel: dvb-usb: found a 'DViCO FusionHDTV
DVB-T NANO2' in warm state.
Sep 25 19:18:21 mv-laptop kernel: dvb-usb: bulk message failed: -22
(2/-1069664350)
Sep 25 19:18:21 mv-laptop kernel: i2c_adapter i2c-4: SMBus Quick
command not supported, can't probe for chips
Sep 25 19:18:21 mv-laptop kernel: i2c_adapter i2c-4: SMBus Quick
command not supported, can't probe for chips
Sep 25 19:18:21 mv-laptop kernel: dvb-usb: will pass the complete
MPEG2 transport stream to the software demuxer.
Sep 25 19:18:21 mv-laptop kernel: DVB: registering new adapter (DViCO
FusionHDTV DVB-T NANO2)
Sep 25 19:18:23 mv-laptop kernel: dvb-usb: bulk message failed: -110 (1/0)
Sep 25 19:18:25 mv-laptop kernel: dvb-usb: bulk message failed: -110 (3/0)
Sep 25 19:18:27 mv-laptop kernel: dvb-usb: bulk message failed: -110 (3/0)
Sep 25 19:18:29 mv-laptop kernel: dvb-usb: bulk message failed: -110 (5/0)
Sep 25 19:18:29 mv-laptop kernel: dvb-usb: no frontend was attached by
'DViCO FusionHDTV DVB-T NANO2'
Sep 25 19:18:29 mv-laptop kernel: dvb-usb: DViCO FusionHDTV DVB-T
NANO2 successfully initialized and connected.
Sep 25 19:18:29 mv-laptop kernel: usbcore: registered new driver dvb_usb_cxusb


MyhtTV etc seems to want a frontend0 device and as far as I can tell
this has not been created due possibly to the "SMBus Quick command not
supported" error or some other problem.

I'd appreciate any help.

Regards
Mark



More information about the linux-dvb mailing list