[linux-dvb] TT-Budget C-1501

[Stephen Dawkins]

Oliver Endriss wrote:
> Stephen Dawkins wrote:
> 
>>Hi
>>
>>I've recently purchased a Technotrend C-1501 card and I've been trying
>>to get it to work under Linux.
>>
>>I'm not entirely sure what's needed to get it working. I've added the
>>following code to drivers/media/dvb/ttpci/budget.c:
>>
>>in frontend_init:
>>   case 0x101a: // TT Budget-C-1501 (philips tda10023/philips tda8274A)
>>       budget->dvb_frontend = dvb_attach(tda10023_attach,
>>&tda1002x_config, &budget->i2c_adap, read_pwm(budget));
>>       if (budget->dvb_frontend) {
>>          if (dvb_attach(tda827x_attach, budget->dvb_frontend, 0x0e,
>>&budget->i2c_adap, 0) == NULL)
> 
>                     ^^^
> I don't know, but maybe you have to pass a config struct for the tda827x
> driver here.

The documentation says that the config parameter is optional, and it 
only consists of callback functions.

> 
> 
>>             printk("%s: No tda827x found!\n", __FUNCTION__);
>>          break;
>>       }
>>    }
>>
>>and the relevant MAKE_BUDGET_INFO and MAKE_EXTENTION_PCI entries. I'm
>>not entirely sure, but I think the demodulator is on 0x0c on the i2c bus
>>and the tuner is on 0x0e, is there a way of confirming this?
> 
> 
> The tuner address sounds strange to me. If the tuner is not behind an
> i2c gate, you should be able to find it by running i2cdetect (from the
> i2c tools package).
> 

When I run i2cdetect I get:

      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- 0c -- 0e --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

I'm 99% certain the demodulator is 0x0c as any other value causes 
problems when modprobing. I've tried every single value, but none of 
those work either.

> 
>>When I modprobe budget, I get the follow:
>>
>>saa7146: register extension 'budget dvb'.
>>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 17
>>saa7146: found saa7146 @ mem f8de2000 (revision 1, irq 17) (0x13c2,0x101a).
>>budget: budget_attach(): dev:f7281580, info:f8df5c20, budget:f7173000
>>budget_core: ttpci_budget_init(): dev: f7281580, budget: f7173000
>>budget_core: ttpci_budget_init(): saa7146 (0): buffer type = single,
>>width = 188, height = 1024
>>saa7146 (0): dma buffer size 192512
>>DVB: registering new adapter (TT-budget-C-1501)
>>adapter has MAC addr = 00:d0:5c:c6:4f:01
>>budget_core: budget_register(): budget: f7173000
>>DVB: registering frontend 0 (Philips TDA10023 DVB-C)...
>>
>>I also get demux0, dvr0, frontend0 and net0 in /dev/dvb0.
>>
>>I then do a dvbtune -f 666750000 -s 6952, and I get:
>>
>>saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
>>saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
>>
>>I'm not entirely sure what I need todo next to get it working, any help
>>will be greatly appreciated.
> 
> 
> See m920x.c or saa7134-dvb.c for drivers using tda10046 and/or tda827x.
> 

I will take a look at them.

> CU
> Oliver
> 

Thanks & Regards
Stephen