[linux-dvb] [PATCH] support Cinergy HT USB XE (0ccd:0058)

Albert Comerma albert.comerma at gmail.com
Sat Feb 16 00:43:34 CET 2008


So, If it's not a problem, any of you could send me the current xc3028
firmware you are using, because mine does not seem to work... Thanks.

Albert

2008/2/15, Patrick Boettcher <patrick.boettcher at desy.de>:
>
> Aah now I remember that issue, in fact it is no issue. I was seeing that
> problem when send the sleep command or any other firmware command without
> having a firmware running. In was, so far, no problem.
>
> Patrick.
>
>
>
> On Fri, 15 Feb 2008, Holger Dehnhardt wrote:
>
> > Hi Albert, Hi Mauro,
> >
> > I have successfulli patched and compiled the driver. Im using the
> terratec
> > cinergy device and it works fine.
> >
> >>> [ 2251.856000] xc2028 4-0061: Error on line 1063: -5
> >
> > This error message looked very familar to me, so i searched my log and
> guess
> > what I found:
> >
> > Feb 15 20:42:18 musik kernel: xc2028 3-0061: xc2028_sleep called
> > Feb 15 20:42:18 musik kernel: xc2028 3-0061: xc2028_sleep called
> > Feb 15 20:42:18 musik kernel: xc2028 3-0061: Error on line 1064: -5
> > Feb 15 20:42:18 musik kernel: DiB7000P: setting output mode for demod
> df75e800
> > to 0
> > Feb 15 20:42:18 musik kernel: DiB7000P: setting output mode for demod
> df75e800
> > to 0
> >
> > It identifies the marked line (just to be sure because of the differen
> line
> > numbers)
> >
> >       if (priv->firm_version < 0x0202)
> > ->            rc = send_seq(priv, {0x00, 0x08, 0x00, 0x00});
> >       else
> >               rc = send_seq(priv, {0x80, 0x08, 0x00, 0x00});
> >
> >> The above error is really weird. It seems to be related to something
> that
> >> happened before xc2028, since firmware load didn't start on that point
> of
> >> the code.
> >
> > The error really is weird, but it does not seem to cause the troubles -
> my
> > card works despite the error!
> >
> >>
> >>> [ 2289.284000] xc2028 4-0061: Device is Xceive 3028 version 1.0,
> firmware
> >>> version 2.7
> >>
> >> This message means that xc3028 firmware were successfully loaded and it
> is
> >> running ok.
> >
> > This and the following messages look similar...
> >
> > Holger
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080216/ed2105f0/attachment-0001.htm 


More information about the linux-dvb mailing list