[linux-dvb] Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and DVB-S2

Ernst Peinlich e.peinlich at inode.at
Sun Feb 17 13:14:30 CET 2008


Jens Krehbiel-Gräther schrieb:
> Hi!
>
> Here is the complete log.
>
> syslog from loading the modules:
>
> Feb 12 13:57:34 dev kernel: usb 3-6: new high speed USB device using 
> ehci_hcd and address 3
> Feb 12 13:57:34 dev kernel: usb 3-6: configuration #1 chosen from 1 choice
> Feb 12 13:57:34 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state.
> Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 1
> Feb 12 13:57:34 dev kernel: dvb-usb: will pass the complete MPEG2 
> transport stream to the software demuxer.
> Feb 12 13:57:34 dev kernel: DVB: registering new adapter (PCTV HDTV USB)
> Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Enter
> Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1b6]: 02
> Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c2]: 00
> Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c3]: 00
> Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf141]: 02
> Feb 12 13:57:34 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=81
> Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: ID reg=[0x81]
> Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Device ID=[8], Release=[1]
> Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base 
> address=[0x00000400], Offset=[0xf334], Data=[0x444d4431]
> Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base 
> address=[0x00000400], Offset=[0xf33c], Data=[0x00000001]
> Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Demodulator Core 
> ID=[DMD1], Version=[1]
> Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base 
> address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331]
> Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base 
> address=[0x00000800], Offset=[0xfa34], Data=[0x00000001]
> Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: FEC Core ID=[FEC1], 
> Version=[1]
> Feb 12 13:57:34 dev kernel: stb0899_attach: Attaching STB0899
> Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0)
> Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 0x60)
> Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Leave Ok
> Feb 12 13:57:34 dev kernel: DVB: registering frontend 0 (STB0899 
> Multistandard)...
> Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Enter
> Feb 12 13:57:34 dev kernel: stb6100_attach: Attaching STB6100
> Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Leave
> Feb 12 13:57:34 dev kernel: input: IR-receiver inside an USB DVB 
> receiver as /class/input/input5
> Feb 12 13:57:34 dev kernel: dvb-usb: schedule remote query interval to 
> 100 msecs.
> Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 0
> Feb 12 13:57:34 dev kernel: dvb-usb: PCTV HDTV USB successfully 
> initialized and connected.
> Feb 12 13:57:34 dev kernel: usbcore: registered new interface driver 
> pctv452e
>
>
> And a complete log from a complete scan on Astra 19,2°E can you download 
> here (about 1,6MB uncompressed, for Download 37kB gzip-File):
> http://www.rz.uni-karlsruhe.de/~ry52/syslog.gz
>
> If you see anything that can help me, please let me know. I don't 
> believe that the new device has also a hardware failiure, because (as I 
> wrote) it works for one time scanning and one time tuning... :-(
>
> Hope to get help here,
>
> Jens
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>   
Hi
i have problems with DVBS on the driver.
i get PES errors
on DVBS2 its works
(vdr-1.5.14+h264 patch)
thanks





More information about the linux-dvb mailing list