[linux-dvb] Hauppauge WinTV-HVR4000 and DVB-S2...

[Zenon Mousmoulas]

On 19 Φεβ 2008, at 5:07 ΜΜ, Zenon Mousmoulas wrote:

>
> On 19 жЕБ 2008, at 4:59 лл, Igor wrote:
>
>>>> could you show the szap2 output during dvb-s2 tuning
>>>
>>> I just tried it again with 2.6.22:
>>>
>>> tvbox2:~# szap2 -r -t2 -e3 -m8 -c tvbox_dvb/zap/dvb-s/
>>> diseqc4_HellasSat2-39.0E.new LUXETV
>>> reading channels from file 'tvbox_dvb/zap/dvb-s/
>>> diseqc4_HellasSat2-39.0E.new'
>>> zapping to 2 'LUXETV':
>>> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,
>>> apid = 0x0bc6 sid = 0x012d (fec = 64, mod = 8)
>>> Querying info .. Delivery system=DVB-S2
>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>> ioctl DVBFE_GET_INFO failed: Operation not supported
>>>
>>> I will try it again shortly with 2.6.24.
>>
>> try to use the usual szap, not szap2
>
> I already did. It didn't work...
>
> tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new  
> LUXETV
> reading channels from file 'tvbox_dvb/zap/dvb-s/ 
> diseqc4_HellasSat2-39.0E.new'
> zapping to 2 'LUXETV':
> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,  
> apid = 0x0bc6
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
> status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
> status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
> status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |
> status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
> status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |

And with 2.6.24:

tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new  
LUXETV
reading channels from file 'tvbox_dvb/zap/dvb-s/ 
diseqc4_HellasSat2-39.0E.new'
zapping to 2 'LUXETV':
sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,  
apid = 0x0bc6
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |


Something particularly important: szap is from the Debian dvb- 
utils-1.1.1-3 package. Is there a requirement for a particular version  
of dvb-apps?

Thanks,
Z.