[linux-dvb] dvico dual digital 4 revision 2.0

[Martin Thompson]

well it looks like i could be stuffed
just found the new windows driver and they call it a dual 5

heres a snip of the driver.inf

%AvsBluebird.DVBT_Dual.DeviceDesc%     =Bluebird2.DVBT_NANO2, 
USB\VID_0FE9&PID_DB78      ; DUAL4 (XC3028+Zarlink)
%AvsBluebird.DVBT_Hawk1.DeviceDesc%    =Bluebird2.DVBT_HAWK1, 
USB\VID_0FE9&PID_DB80      ; Firehawk1 (DNOS504Z)
%AvsBluebird.DVBT_Dual5.DeviceDesc%    =Bluebird2.DVBT_NANO_DIB1, 
USB\VID_0FE9&PID_DB98      ; DUAL5 (DIB7070PA x 2)
note Dual 5  thats my card

link to driver
ftp://ftp.dvico.com/Products/FusionHDTV/Down/FusionHDTV3.66.01Web.exe

looks like we could  be stuffed


----- Original Message ----- 
From: "Adam Nielsen" <a.nielsen at shikadi.net>
To: "Martin Thompson" <mandm.thompson at gmail.com>
Sent: Friday, February 29, 2008 7:36 AM
Subject: Re: [linux-dvb] dvico dual digital 4 revision 2.0


>> if i change the id in the usb id file the it finds it and loads
>> the card apperas as a dvb 0, 1
>> but dmeg shows frontend not loaded
> 
> That sounds like you haven't changed the USB IDs in the firmware loading
> code - presumably it uses the IDs to figure out which firmware files to
> load, and if it doesn't know about the IDs it doesn't even try to load
> any firmware.
> 
> I think you need to figure out how to force it to load some firmware
> files before you can get any further.
> 
> Cheers,
> Adam.
>