[linux-dvb] dib0700 patch / Nova-t

David Harvey dcharvey at dsl.pipex.com
Wed Jan 9 14:35:30 CET 2008


Is this patch in the mercurial source or needs manually applying?

thx,

dh
On Jan 9, 2008, at 11:00 AM, linux-dvb-request at linuxtv.org wrote:

> Send linux-dvb mailing list submissions to
> 	linux-dvb at linuxtv.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> or, via email, send a message with subject or body 'help' to
> 	linux-dvb-request at linuxtv.org
>
> You can reach the person managing the list at
> 	linux-dvb-owner at linuxtv.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of linux-dvb digest..."
>
>
> Today's Topics:
>
>   1. Re: WinTV-NOVA-T-500 Status (Patrick Boettcher)
>   2. Re: Twinhan VP1041 and 64-bit FC6 troubles
>      (boppdvb at digestive.jpl.se)
>   3. Re: Terratec Cinergy C DVB-C card (thomas schorpp)
>   4. Re: Frontend doesn't tune in on Pro7 channels when
>      SatReceiver is active on Multiswitch (Carsten Aulbert)
>   5. Re: WinTV-NOVA-T-500 Status (Soeren Sonnenburg)
>   6. Who can receive DVB-S2 on Atlantic Bird 3 (5W) ?
>      (Jean-Claude Repetto)
>   7. Re: twinhan 1041 troubles (????????? ??????)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 8 Jan 2008 23:20:57 +0100 (CET)
> From: Patrick Boettcher <patrick.boettcher at desy.de>
> Subject: Re: [linux-dvb] WinTV-NOVA-T-500 Status
> To: Soeren Moch <Soeren.Moch at stud.uni-hannover.de>
> Cc: linux-dvb at linuxtv.org
> Message-ID: <Pine.LNX.4.64.0801082319360.31965 at pub2.ifh.de>
> Content-Type: TEXT/PLAIN; charset=US-ASCII
>
> Aah, yes, you're right. It only affects dual-boards and there only the
> streaming problems, which might cause the disconnects.
>
> Your problem was signal reception?
>
>
> Patrick.
>
> --
>  Mail: patrick.boettcher at desy.de
>  WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/
>
> On Tue, 8 Jan 2008, Soeren Moch wrote:
>
>> Patrick Boettcher wrote:
>>> It affects all dib0700-based devices.
>>>
>>> Patrick.
>>>
>>
>> I hoped this patch would solve my Nova-T-Stick problems, but - when
>> looking
>> closer - this patch changes nothing for single-channel dib0700-based
>> devices (like the Nova-T-Stick), or have I missed the point?
>>
>> In other words, do you mean "It affects all dual-channel dib0700- 
>> based
>> devices"?
>>
>> Soeren
>>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 8 Jan 2008 23:31:30 +0100
> From: boppdvb at digestive.jpl.se
> Subject: Re: [linux-dvb] Twinhan VP1041 and 64-bit FC6 troubles
> To: Gernot Pansy <pansyg at gmx.at>
> Cc: linux-dvb at linuxtv.org
> Message-ID: <20080108223130.GA28373 at digestive.jpl.se>
> Content-Type: text/plain; charset=us-ascii
>
> Hi!
>
> I have patched MythTV with the patch mentioned below, but when I'm
> trying to scan for channels I get no DVB-S2 channels? The first times
> I've tried to scan I got the channels at Thor 1.0W Transponder 11434V
> all time, regardless of what frequency I've enterad in mythtv-setup.  
> But
> now I can't scan any DVB-S2 channnels at all, I only get DVB-S  
> channels.
> I have no idea why I got some DVB-S2 channels the first times I've  
> tried
> to scan.
>
> I'm having a Hauppauge HVR4000 running with multiproto patched for
> HVR4000 support.
> ./szap2 and VDR patched with H.264/DVB-S2 works.
>
> Thanks for any help!
>
> Best regards, Lars Fredriksson
>
> On Mon, Nov 12, 2007 at 01:54:27PM +0100, Gernot Pansy wrote:
>
>> p.s.:
>>
>> if you want to test it mythtv, youd could try this hack against  
>> current svn:
>>
>> http://pansy.at/gernot/mythtv-multiproto-hack.diff.gz
>>
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 09 Jan 2008 00:44:40 +0100
> From: thomas schorpp <thomas.schorpp at googlemail.com>
> Subject: Re: [linux-dvb] Terratec Cinergy C DVB-C card
> Cc: linux-dvb at linuxtv.org
> Message-ID: <47840AE8.3050204 at googlemail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Jonatan Wiik wrote:
>> Hi,
>>
>> Does anyone happen to have any information on the DVB-C PCI-card  
>> called
>> "Cinergy C" by Terratec (
>> http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=267) 
>> .
>> It seems like it is meant to replace the Cinergy 1200 DVB-C card, but
>> I
>> wasn't able to find any information about its Linux-compatibility
>
> card is supported by linuxtv.org kernel delivered drivers since long.
>
> see wiki, list archive
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 09 Jan 2008 07:52:10 +0100
> From: Carsten Aulbert <carsten at welcomes-you.com>
> Subject: Re: [linux-dvb] Frontend doesn't tune in on Pro7 channels
> 	when	SatReceiver is active on Multiswitch
> To: "Oliver Bardenheier (obardenh)" <obardenh at cisco.com>
> Cc: linux-dvb at linuxtv.org
> Message-ID: <47846F1A.30202 at welcomes-you.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
>
> Oliver Bardenheier (obardenh) schrieb:
>> I have a strange behaviour since a few days on my VDR
>>
>> I have a 9/8 Multiswitch with two VDRs and a Humax PR-1000HD  
>> connected.
>>
>> When I switch on the Humax I don't get the frontend synched on the  
>> VDR
>> with a NOVA-S-Plus (mercurial tree)
>>
>> ProSieben;ProSiebenSat.1:12545:hC56:S19.2E:22000:511:512=deu;515=dd: 
>> 33:0
>> :17501:1:1107:0
>>
>> All other channels got synched, only Sat1, Pro7, Kabel, 9live, etc.
>> don't get a lock.
>> Any ideas if this could be a driver issue or where to look at ?
>
> Hi,
>
> I don't know if they switched satelite channels during the past  
> year. If
> not, the effect you are seeing could be caused by a wireless telephone
> (DECT) since I believe DECt frequencies are in the same range as the
> "downsampled" DVB-S signals in-house. But I think they wanted to  
> switch
> at some point, so it might not apply to you. So my guess would be that
> there is a new telephone nearby (or badly isolated cables).
>
> HTH
>
> Carsten
>
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 09 Jan 2008 06:58:55 +0000
> From: Soeren Sonnenburg <dvb-ml at nn7.de>
> Subject: Re: [linux-dvb] WinTV-NOVA-T-500 Status
> To: Patrick Boettcher <patrick.boettcher at desy.de>
> Cc: linux-dvb at linuxtv.org
> Message-ID: <1199861936.5577.128.camel at localhost>
> Content-Type: text/plain
>
> On Tue, 2008-01-08 at 23:20 +0100, Patrick Boettcher wrote:
>> Aah, yes, you're right. It only affects dual-boards and there only  
>> the
>> streaming problems, which might cause the disconnects.
>>
>> Your problem was signal reception?
>
> Well my problem is random disconnects on all single tuner dongles I  
> have
> although I am using F-connectors + big antenna on the roof already...
>
> If this patch is meant to fix problems on dual tuner boards only  
> then it
> won't help at all as the problem is already there for single tuner
> boards :(
>
> Soeren S.
>
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 09 Jan 2008 08:36:22 +0100
> From: Jean-Claude Repetto <jrepetto at free.fr>
> Subject: [linux-dvb] Who can receive DVB-S2 on Atlantic Bird 3 (5W) ?
> To: linux-dvb at linuxtv.org
> Message-ID: <47847976.2080005 at free.fr>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> I am looking for someone that can receive Atlantic Bird 3 (5? W), and
> that has a DVB-S2 card.
> If you can, please could you try to tune the transponder KC5 (11139.00
> V) 8PSK SR:26707 FEC 7/8 , then record 10 or 20 seconds of full stream
> and put it on a FTP site ?
>
> Thanks,
> Jean-Claude
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 9 Jan 2008 18:09:14 +1000
> From: ????????? ?????? <ua0lnj at bk.ru>
> Subject: Re: [linux-dvb] twinhan 1041 troubles
> To: "Manu Abraham" <abraham.manu at gmail.com>
> Cc: linux-dvb at linuxtv.org
> Message-ID: <00d101c85296$ed626600$420619ac at mediatel.mrdv>
> Content-Type: text/plain; format=flowed; charset="utf-8";
> 	reply-type=original
>
> Hi
> I complete scan HI SR on 1041, Express AM2 80E
> 11606V, SR 44948 5/6
> If I set freq to 44890 or 44900, scan has lock !!!
> But if I set 44948, no lock...
> I think this is main trouble, and diseqC work normal...
> Because some other transponders lock fine.
>
>
>
> ------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
> End of linux-dvb Digest, Vol 36, Issue 27
> *****************************************




More information about the linux-dvb mailing list