[linux-dvb] Lifeview FlyDVB-T (Tuner issues?)
Robert Noble-Eddy
robnobleeddy at gmail.com
Sun Jan 13 21:36:02 CET 2008
Apologies for the third email in quick succession. As a last resort I
attempted to use the firmware from the Windows driver CD I got with
the card (taking the same file as in the script get_dvb_firmware, as
the file is a different size I guess it's a different version of the
firmware) and this produced the same ouput as I got using any of the
different versions of the firmware for the tda10046. I've included the
output below. The line
[ 166.177253] tda1004x: setting up plls for 48MHz sampling clock
[ 168.138939] tda1004x: found firmware revision 29 -- ok
appears each time I attempt a scan.
Hope that helps someone understand the problem,
Rob
[ 28.129038] Linux video capture interface: v2.00
[ 28.360707] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 28.360783] PCI: Enabling device 0000:00:0f.0 (0004 -> 0006)
[ 28.360797] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level,
low) -> IRQ 20
[ 28.360809] saa7133[0]: found at 0000:00:0f.0, rev: 240, irq: 20,
latency: 32, mmio: 0xbd000000
[ 28.360816] saa7133[0]: subsystem: 5168:0306, board: LifeView
FlyDVB-T DUO / MSI TV at nywhere Duo [card=55,autodetected]
[ 28.360825] saa7133[0]: board init: gpio is 210000
[ 28.360921] input: saa7134 IR (LifeView FlyDVB-T D as /class/input/input4
[ 28.542131] saa7133[0]: i2c eeprom 00: 68 51 06 03 54 20 1c 00 43
43 a9 1c 55 d2 b2 92
[ 28.542141] saa7133[0]: i2c eeprom 10: 00 ff a6 0f ff 20 ff ff ff
ff ff ff ff ff ff ff
[ 28.542148] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08
ff 01 2d ff ff ff ff
[ 28.542154] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 28.542160] saa7133[0]: i2c eeprom 40: ff 1c 00 c0 ff 10 ff ff c2
96 01 16 30 15 ff ff
[ 28.542167] saa7133[0]: i2c eeprom 50: ff 00 ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 28.542173] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 28.542179] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff
[ 28.690648] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 28.691242] usbcore: registered new interface driver xpad
[ 28.691247] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c:
driver for Xbox controllers v0.1.6
[ 28.735473] tuner 1-004b: setting tuner address to 61
[ 28.775424] tuner 1-004b: type set to tda8290+75
[ 30.417485] tuner 1-004b: setting tuner address to 61
[ 30.457438] tuner 1-004b: type set to tda8290+75
[ 32.054514] saa7133[0]: registered device video0 [v4l2]
[ 32.054651] saa7133[0]: registered device vbi0
[ 32.054789] saa7133[0]: registered device radio0
[ 32.115560] PCI: Enabling device 0000:00:0e.0 (0004 -> 0005)
[ 32.115570] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level,
low) -> IRQ 19
[ 32.154622] saa7134 ALSA driver for DMA sound loaded
[ 32.154658] saa7133[0]/alsa: saa7133[0] at 0xbd000000 irq 20
registered as card -2
[ 32.315889] DVB: registering new adapter (saa7133[0]).
[ 32.315897] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[ 32.387186] tda1004x: setting up plls for 48MHz sampling clock
[ 32.670826] tda1004x: found firmware revision 29 -- ok
[ 33.225955] lp: driver loaded but no devices found
[ 33.276365] Adding 1100444k swap on /dev/hda2. Priority:-1
extents:1 across:1100444k
[ 33.642747] EXT3 FS on hda1, internal journal
[ 34.251254] kjournald starting. Commit interval 5 seconds
[ 34.251510] EXT3 FS on hda3, internal journal
[ 34.251516] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.262093] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.562467] No dock devices found.
[ 35.620058] input: Power Button (FF) as /class/input/input5
[ 35.624990] ACPI: Power Button (FF) [PWRF]
[ 35.667799] input: Power Button (CM) as /class/input/input6
[ 35.672764] ACPI: Power Button (CM) [PWRB]
[ 37.553931] ppdev: user-space parallel port driver
[ 37.716150] audit(1200254334.409:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=4789 profile="/usr/sbin/cupsd"
[ 39.542753] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 39.542760] apm: overridden by ACPI.
[ 40.004863] NET: Registered protocol family 10
[ 40.005043] lo: Disabled Privacy Extensions
[ 40.038664] Failure registering capabilities with primary security module.
[ 40.224591] Bluetooth: Core ver 2.11
[ 40.224732] NET: Registered protocol family 31
[ 40.224735] Bluetooth: HCI device and connection manager initialized
[ 40.224740] Bluetooth: HCI socket layer initialized
[ 40.239594] Bluetooth: L2CAP ver 2.8
[ 40.239600] Bluetooth: L2CAP socket layer initialized
[ 40.282059] eth0: Setting full-duplex based on MII#1 link partner
capability of 41e1.
[ 40.317965] Bluetooth: RFCOMM socket layer initialized
[ 40.318069] Bluetooth: RFCOMM TTY layer initialized
[ 40.318072] Bluetooth: RFCOMM ver 1.8
[ 42.221753] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 42.229592] [fglrx] Maximum main memory to use for locked dma
buffers: 431 MBytes.
[ 42.229949] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 42.488374] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 17
[ 44.521191] [fglrx] Internal AGP support requested, but kernel AGP
support active.
[ 44.521198] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 44.521204] [fglrx] AGP detected, AgpState = 0x1f000207 (hardware
caps of chipset)
[ 44.522034] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 44.522282] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 44.522542] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 44.522748] [fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps)
[ 44.536556] [fglrx] total GART = 67108864
[ 44.536566] [fglrx] free GART = 51113984
[ 44.536569] [fglrx] max single GART = 51113984
[ 44.536571] [fglrx] total LFB = 134217728
[ 44.536572] [fglrx] free LFB = 116002816
[ 44.536574] [fglrx] max single LFB = 116002816
[ 44.536576] [fglrx] total Inv = 0
[ 44.536578] [fglrx] free Inv = 0
[ 44.536579] [fglrx] max single Inv = 0
[ 44.536581] [fglrx] total TIM = 0
[ 44.617502] NET: Registered protocol family 17
[ 59.367319] eth0: no IPv6 routers present
[ 166.177253] tda1004x: setting up plls for 48MHz sampling clock
[ 168.138939] tda1004x: found firmware revision 29 -- ok
More information about the linux-dvb
mailing list