[linux-dvb] Which soft for a quick test (TT S2-3200 and multiproto)

David BERCOT david.bercot at wanadoo.fr
Sun Jan 20 21:28:15 CET 2008


Hi,

As I write last week, I've tried to install the driver for my TT
S2-3200 card, on Debian.
I have an error at the end (see below), but I'd like to do a quick test
to see if the card is OK. Do you know which soft can I use for this
test ?

Thank you very much.

David.

P.S. : my dmesg...
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
saa7146: found saa7146 @ mem ffffc20001450c00 (revision 1, irq 22)
(0x13c2,0x1019). saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
adapter has MAC addr = 00:d0:5c:0b:a5:8b
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4
budget_ci: CI interface initialised
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
_stb0899_read_reg: Reg=[0xf000], data=81
stb0899_get_dev_id: ID reg=[0x81]
stb0899_get_dev_id: Device ID=[8], Release=[1]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf334], Data=[0x444d4431] _stb0899_read_s2reg Device=[0xf3fc],
Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001]
stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
Offset=[0xfa2c], Data=[0x46454331] _stb0899_read_s2reg Device=[0xfafc],
Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001]
stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] stb0899_attach:
Attaching STB0899 stb6100_attach: Attaching STB6100 DVB: registering
frontend 0 (STB0899 Multistandard)... EXT3 FS on dm-0, internal journal
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/VG_Wilco-LV_Swap.  Priority:-1
extents:1 across:2097144k ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
skge eth1: enabling interface
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
skge eth1: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
dvb_ca adaptor 0: PC card did not respond :(
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080120/db7038d7/attachment.pgp 


More information about the linux-dvb mailing list