[linux-dvb] Error when compiling multiproto...

David BERCOT david.bercot at wanadoo.fr
Thu Jan 24 16:59:11 CET 2008


Hi again,

I'm looking for a solution for my TT S2-3200.
I've just compiled again the multiproto driver and I had this errors :

CC [M]  /opt/dvb/multiproto/v4l/stb0899_drv.o
/opt/dvb/multiproto/v4l/stb0899_drv.c: In function 'stb0899_read_regs':
/opt/dvb/multiproto/v4l/stb0899_drv.c:471: warning: format '%u' expects
type 'unsigned int', but argument 4 has type
'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_write_regs': /opt/dvb/multiproto/v4l/stb0899_drv.c:533:
warning: format '%u' expects type 'unsigned int', but argument 5 has
type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning:
format '%u' expects type 'unsigned int', but argument 5 has type
'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format
'%u' expects type 'unsigned int', but argument 5 has type
'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format
'%u' expects type 'unsigned int', but argument 5 has type
'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format
'%u' expects type 'unsigned int', but argument 4 has type
'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_diseqc_init': /opt/dvb/multiproto/v4l/stb0899_drv.c:834:
warning: unused variable
'ret_2' /opt/dvb/multiproto/v4l/stb0899_drv.c:833: warning: unused
variable 'ret_1' /opt/dvb/multiproto/v4l/stb0899_drv.c:832: warning:
unused variable 'trial' /opt/dvb/multiproto/v4l/stb0899_drv.c:830:
warning: unused variable 'i' /opt/dvb/multiproto/v4l/stb0899_drv.c:830:
warning: unused variable
'count' /opt/dvb/multiproto/v4l/stb0899_drv.c:826: warning: unused
variable 'rx_data' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_sleep': /opt/dvb/multiproto/v4l/stb0899_drv.c:899: warning:
unused variable 'reg' /opt/dvb/multiproto/v4l/stb0899_drv.c: In
function 'stb0899_track': /opt/dvb/multiproto/v4l/stb0899_drv.c:1917:
warning: unused variable
'internal' /opt/dvb/multiproto/v4l/stb0899_drv.c:1914: warning: unused
variable 'lock_lost' /opt/dvb/multiproto/v4l/stb0899_drv.c: At top
level: /opt/dvb/multiproto/v4l/stb0899_drv.c:1709: warning:
'stb0899_track_carrier' defined but not
used /opt/dvb/multiproto/v4l/stb0899_drv.c:1726: warning:
'stb0899_get_ifagc' defined but not
used /opt/dvb/multiproto/v4l/stb0899_drv.c:1743: warning:
'stb0899_get_s1fec' defined but not
used /opt/dvb/multiproto/v4l/stb0899_drv.c:1771: warning:
'stb0899_get_modcod' defined but not used CC
[M]  /opt/dvb/multiproto/v4l/stb0899_algo.o /opt/dvb/multiproto/v4l/stb0899_algo.c:
In function
'stb0899_set_srate': /opt/dvb/multiproto/v4l/stb0899_algo.c:77:
warning: unused variable
'sfr_up' /opt/dvb/multiproto/v4l/stb0899_algo.c:76: warning: unused
variable 'srate_up' /opt/dvb/multiproto/v4l/stb0899_algo.c:76: warning:
unused variable 'tmp_up' /opt/dvb/multiproto/v4l/stb0899_algo.c: In
function
'stb0899_check_tmg': /opt/dvb/multiproto/v4l/stb0899_algo.c:203:
warning: overflow in implicit constant conversion

These are only warnings, but, may be, I miss something and it can
explain my dmesg error :

saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
saa7146: found saa7146 @ mem ffffc20001450c00 (revision 1, irq 22)
(0x13c2,0x1019).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
adapter has MAC addr = 00:d0:5c:0b:a5:8b
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input7
budget_ci: CI interface initialised
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
_stb0899_read_reg: Reg=[0xf000], data=81
stb0899_get_dev_id: ID reg=[0x81]
stb0899_get_dev_id: Device ID=[8], Release=[1]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf334], Data=[0x444d4431]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf33c], Data=[0x00000001]
stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
Offset=[0xfa2c], Data=[0x46454331]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
Offset=[0xfa34], Data=[0x00000001]
stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
stb0899_attach: Attaching STB0899 
stb6100_attach: Attaching STB6100 
DVB: registering frontend 0 (STB0899 Multistandard)...
dvb_ca adaptor 0: PC card did not respond :(

Do you have any idea ?

Thank you very much.

David.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080124/5d428cac/attachment.pgp 


More information about the linux-dvb mailing list