[linux-dvb] Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04

tom thomas at ickes-home.de
Sat Jul 19 10:58:16 CEST 2008


Hi Antti,
I have installed the driver. After reboot dmesg gives the following.

dmesg | grep dvb:

[ 1387.281913] dvb-usb: MSI DIGIVOX Duo successfully deinitialized and
disconnected.
[ 1397.029836] dvb-usb: found a 'MSI DIGIVOX Duo' in cold state, will
try to load a firmware
[ 1397.062503] dvb-usb: downloading firmware from file
'dvb-usb-af9015.fw'
[  760.590855] dvb-usb: generic DVB-USB module successfully
deinitialized and disconnected.
[ 1397.796493] dvb-usb: found a 'MSI DIGIVOX Duo' in warm state.
[ 1397.796602] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 1398.548360] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 1399.517422] dvb-usb: MSI DIGIVOX Duo successfully initialized and
connected.
[ 1510.506232] dvb-usb: could not handle pid_parser
[ 1532.502328] dvb-usb: could not handle pid_parser
[ 1555.125203] dvb-usb: could not handle pid_parser
[ 1577.464244] dvb-usb: could not handle pid_parser
[ 1600.496149] dvb-usb: could not handle pid_parser
[ 1622.496391] dvb-usb: could not handle pid_parser
[ 2324.836824] dvb-usb: could not handle pid_parser
[ 2347.650720] dvb-usb: could not handle pid_parser
[ 2371.133792] dvb-usb: could not handle pid_parser
[ 2393.752616] dvb-usb: could not handle pid_parser
[ 2415.895728] dvb-usb: could not handle pid_parser
[ 2437.891824] dvb-usb: could not handle pid_parser

A channel scan with Kaffeine was not successfull. Here the results:

kbuildsycoca running...
Reusing existing ksycoca
/dev/dvb/adapter0/frontend0 : opened ( Afatech AF9013 DVB-T )
/dev/dvb/adapter1/frontend0 : opened ( Afatech AF9013 DVB-T )
0 EPG plugins loaded for device 0:0.
0 EPG plugins loaded for device 1:0.
Loaded epg data : 0 events (0 msecs)
kio (KMimeType): WARNING: KServiceType::offers : servicetype
ThumbCreator not found
kio (KMimeType): WARNING: KServiceType::offers : servicetype
ThumbCreator not found
tom at super-klappi:~$ DvbCam::probe(): /dev/dvb/adapter0/ca0: : No such
file or directory
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 402000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 1/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 490000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 12/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 514000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 15/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 538000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 18/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 562000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 21/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 586000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 24/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 610000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 27/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 698000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 38/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 722000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 41/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 746000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 44/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 770000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 47/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 858000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.FE_READ_STATUS: Remote I/O error

Transponders: 58/63

Invalid section length or timeout: pid=17

Frontend closed
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 882000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
ERROR tuning 
: Invalid argument
Frontend closed
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
openFe:: Device or resource busy
dvbsi: Cant tune DVB
Transponders: 63
dvbsi: The end :)
Channels found: 0

Thomas


Am Freitag, den 18.07.2008, 23:49 +0300 schrieb Antti Palosaari:
> Antti Palosaari wrote:
> > tom wrote:
> >> Hello,
> >> since a few days I'm trying hard make this stick running. One basic problem is that I'm not able to find out which chipset is in this
> >> stick.
> >> I have tried af9015 driver and firmware, but it doesn't work.
> > 
> > It looks like AF9015 dual design. I think problem you have is missing 
> > device USB-IDs. I will add those in a next few hours and you can test 
> > then again.
> 
> Now it is ready for the test.
> http://linuxtv.org/hg/~anttip/af9015/
> 
> Antti




More information about the linux-dvb mailing list