[linux-dvb] Terratec Cinergy Piranha

Dennis Noordsij dennis.noordsij at movial.fi
Fri Jun 6 11:20:42 CEST 2008


Nicolas Christener schreef:
> Hello
> according to [1] i should contact this list, because I own a currently
> unsupported DVB-T USB device and want to support development :)
> The device I got is labeled 'Terratec Cinergy Piranha'.
> 
> output of `dmesg':
> kernel: hub 5-0:1.0: unable to enumerate USB device on port 5
> kernel: usb 3-1: new full speed USB device using uhci_hcd and address 6
> kernel: usb 3-1: configuration #1 chosen from 1 choice
> kernel: usb 3-1: New USB device found, idVendor=187f, idProduct=0010
> kernel: usb 3-1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> kernel: usb 3-1: Product: SMS 1000
> kernel: usb 3-1: Manufacturer: Siano
> 
> Although I can probably not help to write code for this device I'd be
> happy, if I could help in any other way to get this device supported by
> linux.
> 
> [1] http://linuxtv.org/wiki/index.php/DVB-T_USB_Devices
> 
> kind regards
> Nicolas

Hi Nicolas,

You're in luck :-) That device works very well.

The driver is not in the official tree (yet) so if you would like to use
it you will need to compile it yourself, there are some instructions on
linuxtv.org, and use the following tree:

http://linuxtv.org/hg/~mkrufky/siano

You will also need to take the firmware file "SMS100x_Dvbt.inp" (from
the installation CD or windows, or download the drivers from
terratec.net) and copy it to your \lib\firmware or \lib\firmware\`uname
-r` as "dvbt_stellar_usb.inp".

I hope those instructions make sense :-)

Dennis



More information about the linux-dvb mailing list