[linux-dvb] No frontend when using leadtek dtv dongle gold with last cvs af9015 branch

[marsupilamies]


        Hi,
        
        I've just compiled the last cvs branch of af9015.
        But when I plug the dongle I've this:
        
        [ 3588.095563] usb 4-6: new high speed USB device using ehci_hcd
        and
        address 11
        [ 3588.232504] usb 4-6: configuration #1 chosen from 1 choice
        [ 3588.232950] af9015_usb_probe: interface:0
        [ 3588.234439] af9015_read_config: IR mode:1
        [ 3588.235928] af9015_read_config: TS mode:0
        [ 3588.239558] af9015_read_config: [0] xtal:2 set
        adc_clock:28000
        [ 3588.247095] af9015_read_config: [0] IF1:4300
        [ 3588.250881] af9015_read_config: [0] MT2060 IF1:0
        [ 3588.253348] af9015_read_config: [0] tuner id:156
        [ 3588.253907] af9015_identify_state: reply:02
        [ 3588.253912] dvb-usb: found a 'Leadtek WinFast DTV Dongle
        Gold' in
        warm state.
        [ 3588.254034] dvb-usb: will pass the complete MPEG2 transport
        stream to
        the software demuxer.
        [ 3588.254370] DVB: registering new adapter (Leadtek WinFast DTV
        Dongle
        Gold)
        [ 3588.254844] af9015_af9013_frontend_attach: init I2C
        [ 3588.254847] af9015_i2c_init:
        [ 3588.254871] af9015_eeprom_dump:
        [ 3588.278762] 00: 31 c2 bb 0b 00 00 00 00 13 04 29 60 00 02 01
        02 
        [ 3588.313482] 10: 00 80 00 fa fa 10 40 ef 01 30 31 30 31 30 32
        30 
        [ 3588.345396] 20: 35 30 35 30 30 30 30 31 ff ff ff ff ff ff ff
        ff 
        [ 3588.369301] 30: 00 00 3a 01 00 08 02 00 cc 10 00 00 9c ff ff
        ff 
        [ 3588.399095] 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff
        ff 
        [ 3588.427625] 50: ff ff ff ff ff 26 00 00 04 03 09 04 10 03 4c
        00 
        [ 3588.454093] 60: 65 00 61 00 64 00 74 00 65 00 6b 00 30 03 57
        00 
        [ 3588.490556] 70: 69 00 6e 00 46 00 61 00 73 00 74 00 20 00 44
        00 
        [ 3588.518653] 80: 54 00 56 00 20 00 44 00 6f 00 6e 00 67 00 6c
        00 
        [ 3588.542630] 90: 65 00 20 00 47 00 6f 00 6c 00 64 00 20 03 30
        00 
        [ 3588.569231] a0: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30
        00 
        [ 3588.593207] b0: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff
        ff 
        [ 3588.617210] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
        ff 
        [ 3588.641163] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
        ff 
        [ 3588.665138] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
        ff 
        [ 3588.689117] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
        ff 
        [ 3588.752816] af9013: Unknown symbol __floatsidf
        [ 3588.752888] af9013: Unknown symbol __adddf3
        [ 3588.752960] af9013: Unknown symbol __fixdfsi
        [ 3588.753025] af9013: Unknown symbol __divdf3
        [ 3588.753089] af9013: Unknown symbol __muldf3
        [ 3588.795881] DVB: Unable to find symbol af9013_attach()
        [ 3588.795896] dvb-usb: no frontend was attached by 'Leadtek
        WinFast DTV
        Dongle Gold'
        [ 3588.796034] input: IR-receiver inside an USB DVB receiver
        as /devices/pci0000:00/0000:00:10.3/usb4/4-6/input/input19
        [ 3588.822739] dvb-usb: schedule remote query interval to 150
        msecs.
        [ 3588.822754] dvb-usb: Leadtek WinFast DTV Dongle Gold
        successfully
        initialized and connected.
        [ 3588.822759] af9015_init:
        [ 3588.822762] af9015_init_endpoint: USB speed:3
        [ 3588.834106] af9015_download_ir_table:
        [ 3588.915044] input: Leadtek WinFast DTV Dongle Gold
        as /devices/pci0000:00/0000:00:10.3/usb4/4-6/4-6:1.1/input/input20
        
        
        I don't know why I've the "af9013: Unknow symbol"
        I'm using a 2.6.24-19 kernel on a ubuntu 8.04.
        
        Maybe the issue is related to this kernel ?
        
        Is anybody can help me ?
        
        Thanks