[linux-dvb] Terratec Cinergy C HD (1822:4e35)

Mikko Mäkinen mikko.reijo.makinen at gmail.com
Wed Jun 25 20:21:05 CEST 2008


Hello everybody,

I've been trying to get my recently (yesterday) bought dvb-c tuner working
under Ubuntu Hardy. Installed drivers from http://www.jusst.de/hg/mantis,
and the /dev/dvb got populated, but without frontend.


Output from lspci:

administrator at hydra:~$ lspci -d 1822:4e35 -vv
00:08.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
    Subsystem: TERRATEC Electronic GmbH Unknown device 1178
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR+ <PERR+
    Latency: 32 (2000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at fc020000 (32-bit, prefetchable) [size=4K]

PCI id seems to have changed from the earlier Cinergy C cards.

 Output (partial) from dmesg:

[   33.894498] found a VP-2040 PCI DVB-C device on (00:08.0),
[   33.894502]     Mantis Rev 1 [153b:1178], irq: 20, latency: 32
[   33.894507]     memory: 0xfc020000, mmio: 0xf8972000
[   33.897204]     MAC Address=[00:08:c8:1c:80:c0]
[   33.897246] mantis_alloc_buffers (0): DMA=0x374c0000 cpu=0xf74c0000
size=65536
[   33.897253] mantis_alloc_buffers (0): RISC=0x1f9e3000 cpu=0xdf9e3000
size=1000
[   33.897258] DVB: registering new adapter (Mantis dvb adapter)
[   33.926286] input: Power Button (FF) as /devices/virtual/input/input4
[   33.944481] ACPI: Power Button (FF) [PWRF]
[   33.944568] input: Power Button (CM) as /devices/virtual/input/input5
[   33.976486] ACPI: Power Button (CM) [PWRB]
[   33.976625] input: Sleep Button (CM) as /devices/virtual/input/input6
[   33.988428] ACPI: Sleep Button (CM) [SLPB]
[   34.416113] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[   34.418214] mantis_frontend_init (0): !!! NO Frontends found !!!
[   34.418220] mantis_ca_init (0): Registering EN50221 device
[   34.475764] mantis_ca_init (0): Registered EN50221 device
[   34.475777] mantis_hif_init (0): Adapter(0) Initializing Mantis Host
Interface

Even I managed to notice one line stating: "!!! NO Frontends found !!!", so
I guess it's no wonder it isn't working.

Does anyone have a clue what I should try next? Or has anyone had success
with this card. I couldn't find earlier models, like cinergy 1200-c, or even
newer, anywhere. I'm supposed to build a DVB to IP streaming machine for a
school, so I would also be happy if someone knew any other available DVB-C
cards working under linux.

Best regards,
Mikko Mäkinen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080625/d9f5675e/attachment.htm 


More information about the linux-dvb mailing list