[linux-dvb] IR for Afatech 901x

Antti Palosaari crope at iki.fi
Wed May 21 13:40:25 CEST 2008


pjama wrote:
>> Load driver with debug=2 (rmmod dvb-usb-af9015; modprobe dvb-usb-af9015
>> debug=2) and tail -f /var/log/messages to see if there is now some bytes
>> coming from remote.
> 
> As mentioned in an earlier response to this post, the above trashes the
> device /dev/input/event7. Is there any way I can boot with debug set?

1) unplug your device
2) make sure new drivers are installed
3) reboot your machine
4) modprobe dvb-usb-af9015 debug=2
5) tail -f /var/log/messages
6) plug stick (now it should start pushing lines to /var/log/messages 
(or /var/log/debug) ?)

Remote buttons should now recognized in debug dumps.

> Doing evtest on /dev/input/event7 then pushing remote buttons give me
> nothing. I have confirmed remote/receiver works by booting into windows
> and using vendor supplied app.

It does not work because driver does not have mappings to your remote 
controller buttons yet. You should find correct mappings from debug dump 
described above.

Antti
-- 
http://palosaari.fi/



More information about the linux-dvb mailing list