[linux-dvb] CAM of Mantis 2033 still not working
abraham.manu at gmail.com
Fri May 23 21:05:11 CEST 2008
Ruediger Dohmhardt wrote:
> Manu Abraham schrieb:
>> Ruediger Dohmhardt wrote:
>>> Dear Manu,
>>> the code from
>>> http://jusst.de/hg/mantis (10.5.08)
>>> now works fine for the 2033 without the CAM (here Alphacrypt Light)
>>> When I insert the CAM, audio and video stop. I need to remove the CAM
>>> and I must reload the module with
>>> modprobe -r mantis
>>> followed by
>>> modprobe mantis
>>> Could you please look into the attached /var/log/messages file.
>>> Maybe it could provide a hint, what's still wrong.
>>> The verbose level is set to 3 (options mantis verbose=3)
>> Applied some changes, couldn't test the changes while being away, but
>> only build tests. Please do test again, also feel free to play with the
>> individual changesets as to check for various stage tests.
> Dear Manu,
> all changesets from Saturday night did not recognize the CAM.
> I could, though, keep the Alphacrypt-Light plugged, but vdr-1.4.7
> provided only TV from the unencrypted channels.
> vdr's CAM menu could not access the CAM.
> changeset 7325b14e79e460fc (Monday evening):
> Unencrypted channels: ok:
> When I zap to an encrypted one, the drive hangs as shown below.
> Then I need to reboot the machine, because
> modprobe -r mantis
> could not really unload the module.
Can you please test again ?
More information about the linux-dvb