[linux-dvb] DViCO Fusion HDTV DVB-T Dual Express [PATCH]

Zac Spitzer zac.spitzer at gmail.com
Mon May 26 11:29:02 CEST 2008


which pci id is this for? I have a dual digitial 4 (rev 2 ) which is 0fe9:db98

On Mon, May 26, 2008 at 12:20 PM,  <bumkunjo at gmx.de> wrote:
>
> Thanks for the patch, Frieder - it seems to work perfectly on my vdr box - all
> channels tune - good reception.
> i will report if any issues appear. if I can help testing upcoming versions of
> the driver ask me.
>
> Thanks a lot to Chris and Stephen for your work,
>
> Jochen
>
> Am Sonntag 25 Mai 2008 13:28:20 schrieb stev391 at email.com:
>>  Hans-Frieder,
>>
>> Thanks, for this patch.  I have tested it on 1 of 3 machines that I have
>> access to with this DVB card. No issues (Now loads 80 firmwares, instead
>> of 3)
>>
>> It doesn't break Chris Pascoe's xc-test branch with the DViCO Fusion HDTV
>> DVB-T Dual Express.
>>
>> It also makes my patch, to get support into the v4l-dvb head, (newer
>> version then posted here) work a lot more reliably (Perfectly on this
>> test machine, I will run it on my mythbox for a week or so before I post
>> it).
>>
>> I think you should email Chris Pascoe and petition him to include it in
>> his branch.  As this will definitely help alot of people out.
>>
>> Thanks again,
>>
>> Stephen.
>>
>>   ----- Original Message -----
>>   From: "Hans-Frieder Vogt"
>>   To: "jochen s" , stev391 at email.com
>>   Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express [PATCH]
>>   Date: Fri, 23 May 2008 21:46:58 +0200
>>
>>
>>   Jochen,
>>
>>   you are indeed missing firmwares. The xc-test branch from Chris
>>   Pascoe uses the special collection of firmwares
>>   xc3028-dvico-au-01.fw which only contains firmwares for 7MHz
>>   bandwidth (just try to tune a channel in the 7MHz band to confirm
>>   this). To make the card work also for other bandwidths please apply
>>   the following patch and put the standard firmware for xc3028
>>   (xc3028-v27.fw) in the usual place (e.g. /lib/firmware).
>>
>>   This approach should also work for australia, because the standard
>>   firmware also contains those firmwares in xc3028-dvico-au-01.fw.
>>
>>   Stephen, can you confirm this?
>>
>>   Cheers,
>>   Hans-Frieder
>>
>>   --- xc-test.orig/linux/drivers/media/video/cx23885/cx23885-dvb.c
>>   2008-04-26 23:40:52.000000000 +0200
>>   +++ xc-test/linux/drivers/media/video/cx23885/cx23885-dvb.c
>>   2008-05-19 23:15:08.000000000 +0200
>>   @@ -217,9 +217,9 @@ static int dvb_register(struct cx23885_t
>>   .callback = cx23885_dvico_xc2028_callback,
>>   };
>>   static struct xc2028_ctrl ctl = {
>>   - .fname = "xc3028-dvico-au-01.fw",
>>   + .fname = "xc3028-v27.fw",
>>   .max_len = 64,
>>   - .scode_table = ZARLINK456,
>>   + .demod = XC3028_FE_ZARLINK456,
>>   };
>>
>>   fe = dvb_attach(xc2028_attach, port->dvb.frontend,
>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>



-- 
Zac Spitzer -
http://zacster.blogspot.com (My Blog)
+61 405 847 168



More information about the linux-dvb mailing list