[linux-dvb] [PATCH] Take 2: Re: Twinhan VisionPlus DVB-T Card not working
abraham.manu at gmail.com
Fri Nov 21 21:32:01 CET 2008
Terry Barnaby wrote:
> Terry Barnaby wrote:
>> Terry Barnaby wrote:
>>> I am having a problem with the latest DVB drivers.
>>> I have a Twinhan VisionPlus DVB-T card (and other DVB cards) in my
>>> MythTv server running Fedora 8. This is running fine
>>> with the Fedora stock kernel: 126.96.36.199-49.fc8.
>>> However, I have now added a Hauppauge DVB-S2 and so have been
>>> trying the latest DVB Mercurial DVB tree.
>>> This compiles and installs fine and the two DVB-T cards and the
>>> new DVB-S card are recognised and has /dev/dvb entries.
>>> The first DVB-T card, a Twinhan based on the SAA7133/SAA7135
>>> works fine but the Twinhan VisionPlus, which is Bt878 will not
>>> tune in.
>>> Any ideas ?
>>> Has there been any recent changes to the Bt878 driver that could
>>> have caused this ?
>> I have tracked this down to a bug in the bt8xx/dst frontend.
>> It appears that the front end tuning algorithm number as used in
>> dvb_frontend.c has changed format but the default setting in
>> bt8xx/dst has not been updated to match.
>> This patch sets the default algorithm to be software tuning as,
>> I believe, was the original setting. However, I wonder if
>> it should be set to use hardware tuning by default ...
> This is a better patch as it describes the integer values
> that can be used as options.
> diff -r 5dc4a6b381f6 linux/drivers/media/dvb/bt8xx/dst.c
> --- a/linux/drivers/media/dvb/bt8xx/dst.c Wed Nov 19 13:01:33 2008 -0200
> +++ b/linux/drivers/media/dvb/bt8xx/dst.c Fri Nov 21 10:50:00 2008 +0000
> @@ -38,9 +38,9 @@ module_param(dst_addons, int, 0644);
> module_param(dst_addons, int, 0644);
> MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)");
> -static unsigned int dst_algo;
> +static unsigned int dst_algo = DVBFE_ALGO_SW;
> module_param(dst_algo, int, 0644);
> -MODULE_PARM_DESC(dst_algo, "tuning algo: default is 0=(SW), 1=(HW)");
> +MODULE_PARM_DESC(dst_algo, "tuning algo: default is 2=DVBFE_ALGO_SW (options: 1=DVBFE_ALGO_HW)");
> #define HAS_LOCK 1
> #define ATTEMPT_TUNE 2
Can you please add in your Developer Certificate of Origin
Signed-off-by: User.Name <user.name at domain.name>
More information about the linux-dvb