[linux-dvb] Dvico HDTV7 Dual Express signal strength

Korey ODell korey_avail at yahoo.com
Wed Oct 15 15:46:01 CEST 2008


I actually have both. 

The DViCO FusionHDTV 7 Gold [card=65] has the 1411 and the 

DViCO FusionHDTV7 Dual Express [card=10,autodetected] has the 1409.



I can not read the signal strength on either of them.

Here is what femon yields on the Gold card (1411)

status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK

status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK

status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK



recabling this same RF to a HDTV5 Gold card reports ~90-95% signal strength.

Thanks for any help.

--- On Tue, 10/14/08, Michael Krufky <mkrufky at linuxtv.org> wrote:
From: Michael Krufky <mkrufky at linuxtv.org>
Subject: Re: [linux-dvb] Dvico HDTV7 Dual Express signal strength
To: korey_avail at yahoo.com
Cc: linux-dvb at linuxtv.org
Date: Tuesday, October 14, 2008, 6:33 PM

Korey ODell wrote:
> Does reading this card's signal strength work for anyone? I've
tried femon, azap with the latest v4l drivers and a 2.6.26 kernel. Card reports
a lock and otherwise works fine but basically reports 0 for a strength reading.


There are two versions of this card -- one that uses a s5h1409, and the other
uses a s5h1411.  Which version do you have?

(dmesg output will indicate which board you have)

-Mike


--- On Tue, 10/14/08, Michael Krufky <mkrufky at linuxtv.org> wrote:
From: Michael Krufky <mkrufky at linuxtv.org>
Subject: Re: [linux-dvb] Dvico HDTV7 Dual Express signal strength
To: korey_avail at yahoo.com
Cc: linux-dvb at linuxtv.org
Date: Tuesday, October 14, 2008, 6:33 PM

Korey ODell wrote:
> Does reading this card's signal strength work for anyone? I've
tried femon, azap with the latest v4l drivers and a 2.6.26 kernel. Card reports
a lock and otherwise works fine but basically reports 0 for a strength reading.


There are two versions of this card -- one that uses a s5h1409, and the other
uses a s5h1411.  Which version do you have?

(dmesg output will indicate which board you have)

-Mike



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20081015/680bc657/attachment.htm 


More information about the linux-dvb mailing list