[linux-dvb] cx24116 and FE_DISEQC_SEND_MASTER_CMD

Darron Broad darron at kewl.org
Tue Oct 28 15:34:58 CET 2008


In message <ecc945da0810280605n7608617dla7a9673f38853583 at mail.gmail.com>, "pierre gronlier" wrote:
>Hi,

hello

>I just bought a hvr4000 dvb-s card. I have a dish with a quattro
>monobloc lnb head. The first head is pointing towards Astra-19.2E and
>the second one towards Hotbird-13.0E. There is no motor.
>
>I'm using a 2.6.26 kernel with the v4l-dvb (mercurial) driver.
>
>I can scan Astra with this command
>scan -s 0 /usr/share/dvb/dvb-s/Astra-19.2E
>and Hotbird with
>scan -s 1 /usr/share/dvb/dvb-s/Hotbird-13.0E
>
<snip>
>Is that normal to have to repeat the command twince ?

No, but the cx24116 contains some hacks to help when
applications do not indicate the burst mode bit
explicitly. Your LNB appears to depend on tone burst
and dvbstream is not supporting simple switches
by the look of it. There is another IOCTL for
toneburst. If you add that to the code it may work
as expected.

Alternatively, look at the `toneburst' setting
for the cx24116 and change it, however, the default
mode which should derive the toneburst from the message
appears not to be working in this case. Your setup
may just need repeated commands.

If you want to explore problems like this then
you need to enable debugging for the cx24116
and show what dvbstream in delivering directly
to the driver so we can see for sure what's
happening and that we make no false assumptions.

cya!

--

 // /
{:)==={ Darron Broad <darron at kewl.org>
 \\ \ 




More information about the linux-dvb mailing list