[linux-dvb] Update: S2API , scan-s2, TT 3200_CI, VDR 1.7.0, Streamdev (latest version)

jean-paul at goedee.nl jean-paul at goedee.nl
Fri Oct 31 09:45:03 CET 2008


I have change the makefile to correct place but i have some fs errors  
and change the disk first before i test again.

JP



Citeren Alex Betis <alex.betis at gmail.com>:

> Do you have Igor's driver in ../s2/ directory?
>
> RTFM?
>
> Here's the part that I wrote in README:
> The driver directory was symbolically linked to "s2" directory. If you have
> the driver in other directory,
> you'll have to change the following line in Makefile to point to the right
> place:
> INCLUDE=-I../s2/linux/include
>
>
> On Thu, Oct 30, 2008 at 10:41 AM, <jean-paul at goedee.nl> wrote:
>
>> compiled on opensuse 11.0 default.
>>
>>
>> gcc -I../s2/linux/include -c atsc_psip_section.c -o atsc_psip_section.o
>> gcc -I../s2/linux/include -c diseqc.c -o diseqc.o
>> gcc -I../s2/linux/include -c dump-vdr.c -o dump-vdr.o
>> gcc -I../s2/linux/include -c dump-zap.c -o dump-zap.o
>> gcc -I../s2/linux/include -c lnb.c -o lnb.o
>> gcc -I../s2/linux/include -c scan.c -o scan.o
>> scan.c: In function âtune_to_transponderâ:
>> scan.c:1669: error: âSYS_DSSâ undeclared (first use in this function)
>> scan.c:1669: error: (Each undeclared identifier is reported only once
>> scan.c:1669: error: for each function it appears in.)
>> scan.c: In function âscan_tpâ:
>> scan.c:2048: error: âSYS_DSSâ undeclared (first use in this function)
>> make: *** [scan.o] Error 1
>>
>> Jean-Paul
>>
>>
>>
>>  Please specify what was the error in scan-s2 compilation and what
>>> changeset
>>> you've used?
>>>
>>>
>>> On Wed, Oct 29, 2008 at 5:47 PM, <jean-paul at goedee.nl> wrote:
>>>
>>>  S2API (drivers) latest version compile without error, Compiling
>>>> scan-s2 give a error on DDS or something like that. Remove it from
>>>> scan.c and compile it again.
>>>>
>>>> Scanning booth LNB?s (astra 1  & 3) and only normal S. Try al options
>>>> but no S2 channels.  Compile VDR with S2API patch and streamdev
>>>> plugin. No problem so far. Copy the new channels.conf to the vdr
>>>> directory and start vdr. Tuning to FTA channels is no problem but
>>>> encrypt channels are not available. For so far as I can see the caids
>>>> are correct (verify with the caids of mij production system  (also
>>>> 2*tt 3200 incl cam/card and multiproto/vdr 1.7.0 and off Corse
>>>> streamdev.
>>>>
>>>> No S2 channels, No encrypt channels.
>>>>
>>>> Regards
>>>>
>>>> Jean-Paul
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-dvb mailing list
>>>> linux-dvb at linuxtv.org
>>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>>
>>>>
>>>
>>
>>
>>
>






More information about the linux-dvb mailing list