[linux-dvb] S2API simple szap-s2 utility

Igor M. Liplianin liplianin at tut.by
Thu Sep 11 19:24:24 CEST 2008


В сообщении от 11 September 2008 15:42:46 Gregoire Favre написал(а):
> On Thu, Sep 11, 2008 at 01:51:08AM +0300, Igor M. Liplianin wrote:
> > There is a program to zap satellite channels with S2API:
> >
> > http://liplianindvb.sourceforge.net/cgi-bin/hgwebdir.cgi/szap-s2/archive/
> >tip.tar.gz
> >
> > For easy understanding and quickly testing S2API (and even viewing TV
> > with mplayer)
>
> Great, I just compiled the s2 driver from
> http://linuxtv.org/hg/~stoth/s2/
> and loaded modules with scripts/rmmod load which shows :
>
> i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for
> chips
> OmniVision ov7670 sensor driver, at your service
> wm8775' 2-001b: chip found @ 0x36 (cx88[0])
> i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for
> chips
> saa7146: register extension 'budget dvb'.
> saa7146: register extension 'budget_av'.
> cx23885 driver version 0.0.1 loaded
> cx2388x blackbird driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: blackbird access: shared
> cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
> DVB-S/S2/T/Hybrid [card=68]
> cx88[0]/2: cx8802 probe failed, err = -19
> cx88[1]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52]
> cx88[1]/2: cx8802 probe failed, err = -19
>
> So I loose one card in this process which isn't a big problem.
>
> But my big problem is that with every channel I try, I get an error :
> szap-s2 -n 13
> reading channels from file '/home/greg/.szap/channels.conf'
> zapping to 13 'BBCHD':
> delivery DVB-S, modulation QPSK
> sat 2, frequency 10847 MHz V, symbolrate 22000000, coderate auto,
> rolloff 0.35
> vpid 0x090e, apid 0x090f, sid 0x1b1c
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> FE_SET_PROPERTY failed: Operation not supported
> status 01 | signal 9b02 | snr 81ea | ber 0000ff00 | unc fffffffe |
> status 01 | signal 9fee | snr 82cb | ber 0000ff00 | unc fffffffe |
> status 01 | signal a00c | snr 8283 | ber 0000ff08 | unc fffffffe |
>
> What did I do wrong ?
>
> Thanks.
Hi,
Just now updated utility

Igor M. Liplianin



More information about the linux-dvb mailing list