[linux-dvb] PCTV hybrid pro stick 330e DVB don't work

killa kalli killazer at operamail.com
Wed Dec 16 13:17:48 CET 2009


Hello, 

I need help.
I buy this stick because it is on supported cards list.
But DVB don't work at all.
I use a 2 days compilation of V4l-DVB.
System : Archlinux 2.6.31 

usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 38 00 30 00 31 00 30 00
em28xx #0: i2c eeprom b0: 31 00 32 00 31 00 39 00 37 00 35 00 35 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xedb3a3bf
em28xx #0: EEPROM info:
em28xx #0:	AC97 audio (5 sample rates)
em28xx #0:	500mA max power
em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
em28xx #0: 

em28xx #0: The support for this board weren't valid yet.
em28xx #0: Please send a report of having this working
em28xx #0: not to V4L mailing list (and/or to other addresses)

tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
tuner 1-0061: chip found @ 0xc2 (em28xx #0)
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
usb 1-3: firmware: requesting xc3028-v27.fw
xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
em28xx #0: Config register raw data: 0xd0
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as video2
em28xx #0: V4L2 VBI device registered as vbi1
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger

When i load em28xx_dvb, i don't have /dev/dvb/adapter0  !!!!

I read on ubuntu forum, that a patch exist for kernel > 2.6.30 but i don't find it.

Thx for your help.

-- 
_______________________________________________
Surf the Web in a faster, safer and easier way:
Download Opera 9 at http://www.opera.com

Powered by Outblaze



More information about the linux-dvb mailing list