[linux-dvb] Siano subsystem (DAB/DMB support) library for linux?
urishk at yahoo.com
Fri Jan 16 15:41:59 CET 2009
--- On Fri, 1/16/09, Ståle Helleberg / drc.no <staale at drc.no> wrote:
> From: Ståle Helleberg / drc.no <staale at drc.no>
> Subject: Re: Siano subsystem (DAB/DMB support) library for linux?
> To: urishk at yahoo.com
> Date: Friday, January 16, 2009, 11:17 AM
> Quoting "Uri Shkolnik" <urishk at yahoo.com>:
> > --- On Thu, 1/15/09, Ståle Helleberg / drc.no
> <staale at drc.no> wrote:
> >> From: Ståle Helleberg / drc.no
> <staale at drc.no>
> >> Subject: Siano subsystem (DAB/DMB support) library
> for linux?
> >> To: urishk at yahoo.com
> >> Cc: staale.helleberg at gmail.com
> >> Date: Thursday, January 15, 2009, 1:16 AM
> >> Dear Uri,
> >> Firstly, let me thank you and Siano for your
> effort in
> >> making your products available for Linux users. It
> is much
> >> appreciated, and much has changed since I
> contacted Siano
> >> early last year regarding a similar request.
> >> I contact you to ask if it's possible to get a
> copy of
> >> your library and headers for talking with the
> subsystem in
> >> C/C++. I've downloaded and applied the patches
> - and the
> >> module loads in dmb mode and looks promising.
> >> The reason for this request is that I'm
> >> studying the DAB standard for a another project. I
> need to
> >> log and analyze the complete datastream from the
> air - to
> >> study and understand the building blocks. I will
> try to
> >> create a parser, but I can't promise that I
> >> succeed. If you have any samples regarding use of
> the API
> >> (tuning to frequency, opening/reading/closing etc)
> and other
> >> documentation, it will also be much appreciated.
> >> Thank you in advance,
> >> Best Regards
> >> Staale Helleberg
> >> drc.no
> > Dear Staale,
> > Please find the requested files at our ftp site.
> > Address: fx.siano-ms.com
> > Username: sms_linux
> > Password: sms_linux
> > Best regard,
> > Uri Shkolnik
> Dear Uri,
> Thank you again for the library and information. I made a
> testprogram yesterday - and was able to communicate, tune
> and receive
> dab/dmb services with next to no problems :) Very well
> As mentioned in my earlier request, for my project I need
> access to
> the unmodifed incomming bitstream (without
> I'm sorry to say that I could not find any functions in
> the headers
> that could be used. Do you have any tips on how to achieve
> Thanks in advance
> Best Regards,
> Staale Helleberg
This is not the usual implementation that our chip-set is used for.
I'll check with our DAB team next week.
More information about the linux-dvb