[linux-dvb] problems with Terratec Cinergy 1200 DVB-C MK3 after mainboard switch
keef at networkhell.de
Sat Jul 11 15:49:34 CEST 2009
> You appear to be experiencing PCI bus errors. Read errors on the PCI
> bus return 0xffffffff and it looks like that's happening on your system:
> (rev ff) (prog-if ff)
> PCI bus error are usually caused by the PCI bridge chips on your
> motherboard being overwhelmed or by bus signals of marginal quality or,
> of course, by actually defective hardware.
> As something simple and easy to try, I would suggest:
> 1. Remove *all* your PCI cards
> 2. Blow the dust out of *all* the slots.
> 3. Reseat the cards.
> That will hopefully improve the signal quality on the bus.
Ok, I cleaned the cards one more and atm there's only 1 card in the
system. Blew out all dust (the motherboard arrived brand new yesterday,
so probably not necessary), still the same probs. After heavy IO the
I plugged one of the cards back in the old motherboard and installed a
backup vdr, no probs at all with that card. Everything else on the new
mainboard works like a charm, so I doubt the board is broken.
Still looking for any other hints,
More information about the linux-dvb