[linux-dvb] problem with KNC1 DVB-C MK3 and TPs ~300Mhz

[Christian Lyra]

Hi there,

I´m playing with a satelco easywatch card (or should be... ) and it
works very nicely with a lot of channels and transponders. But there
are two transponders (309mhz and 321hz) where the video and sound
skips a lot, or dont work/lock at all. Another person had reported the
same problem on IRC today. Perhaps this issue is somewhat related to
the thread "[linux-dvb] TechnoTrend C-1501 - Locking issues on
388Mhz".

Here is the dmesg:

[    2.819472] Linux video capture interface: v2.00
[    2.830678] saa7146: register extension 'budget_av'.
[    2.830770] budget_av 0000:00:00.0: enabling device (0000 -> 0002)
[    2.831231] saa7146: found saa7146 @ mem ffffc20000024000 (revision
1, irq 16) (0x1894,0x0022).
[    2.831244] saa7146 (0): dma buffer size 192512
[    2.831251] DVB: registering new adapter (KNC1 DVB-C MK3)
[    2.867975] adapter failed MAC signature check
[    2.867986] encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[    3.071061] budget_av: saa7113_init(): saa7113 not found on KNC card
[    3.131338] KNC1-0: MAC addr = 00:09:d6:6d:9f:db
[    3.338376] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
[    3.340258] budget-av: ci interface initialised.

the list of good transponders are: 129, 135, 465, 525, 531, 537, 555,
585, and 591

any hints?

-- 
Christian Lyra
PoP-PR/RNP