[vdr] Edit timer/Timer conflict problem vdradmin/epgsearch

Timothy D. Lenz tlenz at vorgon.com
Wed Jul 7 20:56:14 CEST 2010


I never looked at epgsync because I thought that was for syncing between 
2 or more vdr systems. Didn't know it could sync within one file.

On 7/6/2010 11:56 PM, Steffen Barszus wrote:
> On Sun, 04 Jul 2010 15:09:31 -0700
> "Timothy D. Lenz"<tlenz at vorgon.com>  wrote:
>
>> adding the -v 3 doesn't show any more in the logs that I have seen,
>> but another example of how changing the channel on the timer is
>> messing something up:
>>
>>    It picked up a show and set a timer
>>
>>    I changed the channel to the local channel
>>
>>    Now the local epg data has arrived and in vdradmin timeline it show
>> the show in red showing it has a timer set. If I do a search, list
>> the shows for both sat and local and gives the option to setup a
>> timer for the sat channel only because the local is set. BUT, if you
>> go to the timers page and click on the altered entry, it says "can't
>> find epg". What ever is off that causes that is likely also what is
>> causing the OSD notices of timer conflict when there is none. Also,
>> when in an OSD menu, the timers are listed on the right with
>> text2skin/engima and below that it also says timer conflict.
>
> Hmm ... not really solution to the problem you try to debug, but could
> be a solution for you. Have you ever tried:
> a) using epgsync to get the EPG from the Sat you can not watch but has
> good EPG and copy it to your local station
> b) limit the search timer with a channels group to only the stations
> you can receive.
>
> Like that you should be able to use searchtimer you not need to adjust
> and no timers on channels you can receive.
>
> HTH
>
> Steffen
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>



More information about the vdr mailing list