Hauppauge WinTV-NOVA-S-USB2
From LinuxTVWiki
A DVB-S USB 2.0 device from Hauppauge.
It is currently unsupported by LinuxTV.
Contents |
Overview/Features
The Hauppauge WinTV Nova-S-USB2 is a low-cost DVB-S USB device which ships with the following:-
* WinTV-NOVA-S-USB2 device with built-in DVB-S receiver and IR receiver. * Wall plug power supply (7.5V, 1.5A). * IR remote control transmitter and 2 batteries. * 1 Meter USB cable. * Windows Software on CD-ROM. * Quick Installation Guide.
This model appears to replace the older WinTV-NOVA-S USB.
Components Used
- Conexant cx24109 (SoC Tuner)
- Conexant cx24123 QPSK demodulator
- TVMaster TM6000 USB and Video Decoder
Kernel Dumps
Output from hwinfo
hwinfo 41: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_2040_4700_4031017788_if0 Unique ID: wzl7.qJiOpBPZmY2 Parent ID: BSFT.Md0Y5Gpync9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-4/7-4:1.0 SysFS BusID: 7-4:1.0 Hardware Class: unknown Model: "HCW WinTV Model 47xxx" Hotplug: USB Vendor: usb 0x2040 "HCW" Device: usb 0x4700 "WinTV Model 47xxx" Revision: "0.01" Serial ID: "4031017788" Speed: 480 Mbps Module Alias: "usb:v2040p4700d0001dc00dsc00dp00icFFisc00ipFF" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #45 (Hub)
Output of lsusb -v:
Bus 007 Device 004: ID 2040:4700 Hauppauge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2040 Hauppauge
idProduct 0x4700
bcdDevice 0.01
iManufacturer 16
iProduct 32
iSerial 64
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 78
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 48
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)