AVerMedia M103 (Hybrid) Mini PCI

From LinuxTVWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
AverMedia M103 (Hybrid) /w u.FL to BNC pigtail
Block Diagram
Case Study

The AverMedia M103 (Hybrid) Mini PCI is a Hybrid DVB-T Mini PCI card from AVerMedia.

The AverMedia M103 is supported under Linux since kernel 2.6.19.

Overview/features

This device is also known as "AverTV Hybrid DVB-T" or "Avermedia M103 (hybrid)".

TV:

  • Analog TV: Worldwide Analog Access
  • Digital TV: DVB-T
  • Stereo Sound: Yes

Input/output:

  • Inputs: 75 ohm TV Antenna Input
  • Outputs: None

Features:

  • Windows XP MCE Compliant (XP MCE Certificated)
  • Unbundled Remote Control Supported
  • PCI v2.3 interface
Note:
  • It doesn't have any MPEG-2 HW encoding support.
  • This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote.
  • Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped to an other Audio device


Components used

The following ICs and modules are used by the device:

  • Philips SAA7135H - Philips Video Decoder and Broadcast Audio Decoder /w PCI bridge
  • Zarlink MT352 - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
  • Xceive XC3028 - Xceive Silicon Tuner (for Hybrid system)


Identification

The relevant output of lspci -vvnn'

#  sudo lspci -vvnn -s 04:07
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: Avermedia Technologies Inc Device [1461:f636]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: saa7134
	Kernel modules: saa7134

Making it work

The AverMedia M103 works out of box in {U,{K,Ed,X}u}buntu 8.10.

Sample kernel output

If autodetection works you will see the similar output:

# dmseg
[...]
[   26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
[   26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
[   26.904838] saa7134 0000:04:07.0: setting latency timer to 64
[   26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
[   26.904858] saa7133[0]: board init: gpio is 220000
[   27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
[   27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[   27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
[   27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.116022] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   27.128129] saa7133[0]: i2c scan: found device @ 0xc2  [???]
[   27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
[   27.495472] xc2028 0-0061: creating new instance
[   27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   27.496778] firmware: requesting xc3028-v27.fw
[   27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   36.508063] (0), id 00000000000000ff:
[   36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   37.116657] saa7133[0]: registered device video0 [v4l2]
[   37.117502] saa7133[0]: registered device vbi0
[   37.144805] saa7134 ALSA driver for DMA sound loaded
[   37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
[   37.272116] xc2028 0-0061: attaching existing instance
[   37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   37.272742] DVB: registering new adapter (saa7133[0])
[   37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[   37.273160] mt352: mt352_init: hello
[...]
[   43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   46.293245] mt352: mt352_init: hello
[...]

External links