Compro VideoMate E600F

From LinuxTVWiki
Revision as of 19:50, 20 September 2008 by Albatrosmw (talk | contribs)
Jump to navigation Jump to search
This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.


This is a PCIe analog TV/FM tuner card with real-time hardware MPEG-2 encoder.

It is not supported under Linux (non-recognized).

Overview/Features

Analog TV card (NTSC/SECAM/PAL) which supports:

  • 480i/576i component video input,
  • TV stereo and SAP (MTS/NICAM/A2/EIAJ).

This card help you to:

  • Watch analog TV and listen to FM radio on PC,
  • Record TV shows with built-in real-time HQ MPEG-2 Encoder to watch them later.

Components Used

  • Conexant CX23885-13Z PCIe A/V Decoder,
  • Conexant CX23417-11Z MPEG II A/V Encoder,
  • XCeive XC2028ACQ Video Tuner.

Other images

Identification

lspci

Output of lspci:

02:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)

Output of lspci -n:

02:00.0 0400: 14f1:8852 (rev 02)

Output of lspci -vvnn:

02:00.0 Multimedia video controller [0400]: Conexant Device [14f1:8852] (rev 02)
        Subsystem: Compro Technology, Inc. Device [185b:e800]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at fd600000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vital Product Data <?>
        Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [200] Virtual Channel <?>

External Links