Difference between revisions of "Geniatech/MyGica X8507 PCI-Express Hybrid Card"

From LinuxTVWiki
Jump to: navigation, search
(Drivers)
(Sample Kernel Output)
Line 73: Line 73:
 
===Sample Kernel Output===
 
===Sample Kernel Output===
  
dmesg
+
<pre>dmesg
  
 
cx23885 driver version 0.0.3 loaded
 
cx23885 driver version 0.0.3 loaded
 
 
CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected]
 
CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected]
 
 
cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
 
cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
 
 
Adding 8391676k swap on /dev/sda5.  Priority:-1 extents:1 across:8391676k
 
Adding 8391676k swap on /dev/sda5.  Priority:-1 extents:1 across:8391676k
 
 
cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
 
cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
 
 
i2c-core: driver [tuner] using legacy suspend method
 
i2c-core: driver [tuner] using legacy suspend method
 
 
i2c-core: driver [tuner] using legacy resume method
 
i2c-core: driver [tuner] using legacy resume method
 
 
tuner 6-0061: Tuner -1 found with type(s) Radio TV.
 
tuner 6-0061: Tuner -1 found with type(s) Radio TV.
 
 
xc5000 6-0061: creating new instance
 
xc5000 6-0061: creating new instance
 
 
xc5000: Successfully identified at address 0x61
 
xc5000: Successfully identified at address 0x61
 
 
xc5000: Firmware has not been loaded previously
 
xc5000: Firmware has not been loaded previously
 
 
cx23885[0]: registered device video0 [v4l2]
 
cx23885[0]: registered device video0 [v4l2]
 
 
cx23885[0]: registered device vbi0
 
cx23885[0]: registered device vbi0
 
 
cx23885[0]: registered ALSA audio device
 
cx23885[0]: registered ALSA audio device
 
 
xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
 
xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
 
 
xc5000: firmware read 12401 bytes.
 
xc5000: firmware read 12401 bytes.
 
 
xc5000: firmware uploading...
 
xc5000: firmware uploading...
 
 
xc5000: firmware upload complete...
 
xc5000: firmware upload complete...
 
 
cx23885_dev_checkrevision() Hardware revision = 0xb0
 
cx23885_dev_checkrevision() Hardware revision = 0xb0
 
 
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000
 
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000
 
 
Registered IR keymap rc-total-media-in-hand-02
 
Registered IR keymap rc-total-media-in-hand-02
 
 
input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14
 
input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14
 
 
rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0
 
rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0
 
 
IR NEC protocol handler initialized
 
IR NEC protocol handler initialized
 
 
IR RC5(x) protocol handler initialized
 
IR RC5(x) protocol handler initialized
 
 
IR RC6 protocol handler initialized
 
IR RC6 protocol handler initialized
 
 
IR JVC protocol handler initialized
 
IR JVC protocol handler initialized
 
 
IR Sony protocol handler initialized
 
IR Sony protocol handler initialized
 
 
IR SANYO protocol handler initialized
 
IR SANYO protocol handler initialized
 
 
input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15
 
input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15
 
 
IR MCE Keyboard/mouse protocol handler initialized
 
IR MCE Keyboard/mouse protocol handler initialized
 
 
lirc_dev: IR Remote Control driver registered, major 251  
 
lirc_dev: IR Remote Control driver registered, major 251  
 
 
rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
 
rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
 
 
IR LIRC bridge handler initialized
 
IR LIRC bridge handler initialized
 +
</pre>
  
 
===Remote Control Support===
 
===Remote Control Support===

Revision as of 15:28, 29 January 2013

PCI-Express receiver card, it allows you access free-to-air Brazilian standard digital terrestrial TV , analogue TV, FM radio and digital radio. It record and save TV programs directly in MPEG-II/H264 TS file.

Overview/Features

  • PCI-e interface
  • Inputs: Antenna, S-Video, Composite, YPbPr, IR and Stereo Audio

Components Used

Other Images

MyGica X8507 board cx23885 mb86a20s xc5000

Identification

# lspci -vvvnn
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
       Subsystem: Conexant Systems, Inc. Device [14f1:8502]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
       Capabilities: [40] Express (v1) Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
                       ClockPM- Suprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
       Capabilities: [80] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [90] Vital Product Data <?>
       Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
               Address: 0000000000000000  Data: 0000
       Capabilities: [100] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
       Capabilities: [200] Virtual Channel <?>
       Kernel driver in use: cx23885
       Kernel modules: cx23885

Making it Work

Firmware

Drivers

Only analog TV --> Needed kernel > = 3.5

Analog input --> Needed kernel > = 3.7

Radio = not yet

ISDB-t = no yet

Sample Kernel Output

dmesg

cx23885 driver version 0.0.3 loaded
CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected]
cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
Adding 8391676k swap on /dev/sda5.  Priority:-1 extents:1 across:8391676k
cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
tuner 6-0061: Tuner -1 found with type(s) Radio TV.
xc5000 6-0061: creating new instance
xc5000: Successfully identified at address 0x61
xc5000: Firmware has not been loaded previously
cx23885[0]: registered device video0 [v4l2]
cx23885[0]: registered device vbi0
cx23885[0]: registered ALSA audio device
xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
xc5000: firmware read 12401 bytes.
xc5000: firmware uploading...
xc5000: firmware upload complete...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000
Registered IR keymap rc-total-media-in-hand-02
input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14
rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 251 
rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
IR LIRC bridge handler initialized

Remote Control Support

Requires kernel> = 3.9

or apply the following patch: http://patchwork.linuxtv.org/patch/15412/


Disabled by default

External Links