Geniatech/MyGica X8507 PCI-Express Hybrid Card: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 64: Line 64:
===Sample Kernel Output===
===Sample Kernel Output===
# dmesg
# dmesg
cx23885 driver version 0.0.2 loaded
[ 16.409189] cx23885 driver version 0.0.3 loaded
[ 16.409662] CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected]
vendor=8086 device=3a44
[ 17.344877] cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
cx23885 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 18.090197] Adding 8391676k swap on /dev/sda5. Priority:-1 extents:1 across:8391676k
cx23885[0]: Your board isn't known (yet) to the driver.
[ 18.446691] cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
cx23885[0]: Try to pick one of the existing card configs via
[ 18.787919] i2c-core: driver [tuner] using legacy suspend method
cx23885[0]: card=<n> insmod option. Updating to the latest
[ 18.787926] i2c-core: driver [tuner] using legacy resume method
cx23885[0]: version might help as well.
[ 18.788455] tuner 6-0061: Tuner -1 found with type(s) Radio TV.
cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 19.226062] xc5000 6-0061: creating new instance
cx23885[0]: card=0 -> UNKNOWN/GENERIC
[ 19.226769] xc5000: Successfully identified at address 0x61
cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
[ 19.226773] xc5000: Firmware has not been loaded previously
cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
[ 19.226893] cx23885[0]: registered device video0 [v4l2]
cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
[ 19.226991] cx23885[0]: registered device vbi0
cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
[ 19.227304] cx23885[0]: registered ALSA audio device
cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
[ 19.235271] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
[ 19.369880] xc5000: firmware read 12401 bytes.
cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
[ 19.369884] xc5000: firmware uploading...
cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
[ 20.738880] xc5000: firmware upload complete...
cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
[ 21.841084] cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
[ 21.841094] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000
cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
[ 21.937453] Registered IR keymap rc-total-media-in-hand-02
cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
[ 21.937621] input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14
cx23885[0]: card=13 -> Compro VideoMate E650F
[ 21.941251] rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0
cx23885[0]: card=14 -> TurboSight TBS 6920
[ 22.131412] IR NEC protocol handler initialized
cx23885[0]: card=15 -> TeVii S470
[ 22.159305] IR RC5(x) protocol handler initialized
cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
[ 22.279724] IR RC6 protocol handler initialized
cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
[ 22.330778] IR JVC protocol handler initialized
cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
[ 22.542289] IR Sony protocol handler initialized
cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
[ 22.666701] IR SANYO protocol handler initialized
cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
[ 22.864013] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15
cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
[ 22.864171] IR MCE Keyboard/mouse protocol handler initialized
cx23885[0]: card=22 -> Mygica X8506 DMB-TH
[ 23.186676] lirc_dev: IR Remote Control driver registered, major 251
cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
[ 23.221698] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
[ 23.221705] IR LIRC bridge handler initialized
cx23885[0]: card=25 -> Compro VideoMate E800
CORE cx23885[0]: subsystem: 14f1:8502, board: UNKNOWN/GENERIC [card=0,autodetected]
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfe800000
cx23885 0000:03:00.0: setting latency timer to 64


===Remote Control Support===
===Remote Control Support===

Revision as of 12:28, 29 January 2013

PCI-Express receiver card, it allows you access free-to-air Brazilian standard digital terrestrial TV , analogue TV, FM radio and digital radio. It record and save TV programs directly in MPEG-II/H264 TS file.

Overview/Features

  • PCI-e interface
  • Inputs: Antenna, S-Video, Composite, YPbPr, IR and Stereo Audio

Components Used

Other Images

MyGica X8507 board cx23885 mb86a20s xc5000

Identification

# lspci -vvvnn
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
       Subsystem: Conexant Systems, Inc. Device [14f1:8502]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
       Capabilities: [40] Express (v1) Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
                       ClockPM- Suprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
       Capabilities: [80] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [90] Vital Product Data <?>
       Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
               Address: 0000000000000000  Data: 0000
       Capabilities: [100] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
       Capabilities: [200] Virtual Channel <?>
       Kernel driver in use: cx23885
       Kernel modules: cx23885

Making it Work

Firmware

Drivers

Sample Kernel Output

# dmesg

[ 16.409189] cx23885 driver version 0.0.3 loaded [ 16.409662] CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected] [ 17.344877] cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 18.090197] Adding 8391676k swap on /dev/sda5. Priority:-1 extents:1 across:8391676k [ 18.446691] cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 18.787919] i2c-core: driver [tuner] using legacy suspend method [ 18.787926] i2c-core: driver [tuner] using legacy resume method [ 18.788455] tuner 6-0061: Tuner -1 found with type(s) Radio TV. [ 19.226062] xc5000 6-0061: creating new instance [ 19.226769] xc5000: Successfully identified at address 0x61 [ 19.226773] xc5000: Firmware has not been loaded previously [ 19.226893] cx23885[0]: registered device video0 [v4l2] [ 19.226991] cx23885[0]: registered device vbi0 [ 19.227304] cx23885[0]: registered ALSA audio device [ 19.235271] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [ 19.369880] xc5000: firmware read 12401 bytes. [ 19.369884] xc5000: firmware uploading... [ 20.738880] xc5000: firmware upload complete... [ 21.841084] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 21.841094] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000 [ 21.937453] Registered IR keymap rc-total-media-in-hand-02 [ 21.937621] input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14 [ 21.941251] rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0 [ 22.131412] IR NEC protocol handler initialized [ 22.159305] IR RC5(x) protocol handler initialized [ 22.279724] IR RC6 protocol handler initialized [ 22.330778] IR JVC protocol handler initialized [ 22.542289] IR Sony protocol handler initialized [ 22.666701] IR SANYO protocol handler initialized [ 22.864013] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15 [ 22.864171] IR MCE Keyboard/mouse protocol handler initialized [ 23.186676] lirc_dev: IR Remote Control driver registered, major 251 [ 23.221698] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0 [ 23.221705] IR LIRC bridge handler initialized

Remote Control Support

External Links