Hauppauge WinTV-HVR-1900

From LinuxTVWiki
Revision as of 00:09, 25 February 2010 by Yminus (talk | contribs)
Jump to navigation Jump to search

A Hybrid DVB-T USB device from Hauppauge.

Overview/Features

Interface: USB 2.0 Inputs: Composite, S-Video

Making it Work

Checking the driver

This information is taken from this forum thread on ubuntuusers.de and complemented by own experiences on Ubuntu and Gentoo.

According to Hauppauge's | Running WinTV under Linux support page, there is Linux support for this card since the kernel 2.6.26 release.

This is the output of dmesg when plugged in on a Gentoo system running kernel 2.6.31:

usb 7-2: new high speed USB device using ehci_hcd and address 4
usb 7-2: New USB device found, idVendor=2040, idProduct=7300
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-2: Product: WinTV
usb 7-2: Manufacturer: Hauppauge
usb 7-2: SerialNumber: 7300-00-F06BBD71
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usb 7-2: firmware: requesting v4l-pvrusb2-73xxx-01.fw
pvrusb2: ***WARNING*** Device fx2 controller firmware seems to be missing.
pvrusb2: Did you install the pvrusb2 firmware files in their proper location?
pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw
pvrusb2: Failure uploading firmware1
pvrusb2: Device initialization was not successful.
pvrusb2: Giving up since device microcontroller firmware appears to be missing.

If dmesg output does not look like this your kernel may be to old. According to the | forum thread on ubuntuusers.de the built-in drivers in older version of the kernel may have inconsistencies. You can download new drivers from | LinuxTV (v4l). To compile and install untar the driver to a directory of your choice, change into the drivers directory and issue as root:

make
make install

Make sure you have the built-essentials (gcc and co.) installed.

Getting the firmware

Next you need the firmware file v4l-pvrusb2-73xxx-01.fw.

You may | extract the firmware yourself or | download the extracted firmware. Put the firmware into one of these directories (trie out which one of those works for you):

/lib/firmware/
/lib/firmware/2.6/

On Gentoo its /lib/firmware/.

This is the dmesg output after plugging in the device:

usb 7-2: new high speed USB device using ehci_hcd and address 6                                                      
usb 7-2: New USB device found, idVendor=2040, idProduct=7300                                                         
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3                                                    
usb 7-2: Product: WinTV                                                                                              
usb 7-2: Manufacturer: Hauppauge                                                                                     
usb 7-2: SerialNumber: 7300-00-F06BBD71                                                                              
usb 7-2: configuration #1 chosen from 1 choice                                                                       
cx25840 4-0044: cx25843-24 found @ 0x88 (pvrusb2_a)                                                                  
pvrusb2: Attached sub-driver cx25840                                                                                 
tuner 4-0042: chip found @ 0x84 (pvrusb2_a)                                                                          
pvrusb2: Attached sub-driver tuner                                                                                   
cx25840 4-0044: firmware: requesting v4l-cx25840.fw                                                                  
cx25840 4-0044: unable to open firmware v4l-cx25840.fw                                                               
tveeprom 4-00a2: Hauppauge model 73219, rev D1F5, serial# 7060849                                                    
tveeprom 4-00a2: MAC address is 00-0D-FE-6B-BD-71                                                                    
tveeprom 4-00a2: tuner model is NXP 18271C2 (idx 155, type 54)                                                       
tveeprom 4-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)                 
tveeprom 4-00a2: audio processor is CX25843 (idx 37)                                                                 
tveeprom 4-00a2: decoder processor is CX25843 (idx 30)                                                               
tveeprom 4-00a2: has radio, has IR receiver, has IR transmitter                                                      
pvrusb2: Supported video standard(s) reported available in hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K         
pvrusb2: Mapping standards mask=0x3ff00ff (PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)            
pvrusb2: Setting up 20 unique standard(s)                                                                            
pvrusb2: Set up standard idx=0 name=PAL-B/G
pvrusb2: Set up standard idx=1 name=PAL-D/K
pvrusb2: Set up standard idx=2 name=SECAM-B/G
pvrusb2: Set up standard idx=3 name=SECAM-D/K
pvrusb2: Set up standard idx=4 name=PAL-B
pvrusb2: Set up standard idx=5 name=PAL-B1
pvrusb2: Set up standard idx=6 name=PAL-G
pvrusb2: Set up standard idx=7 name=PAL-H
pvrusb2: Set up standard idx=8 name=PAL-I
pvrusb2: Set up standard idx=9 name=PAL-D
pvrusb2: Set up standard idx=10 name=PAL-D1
pvrusb2: Set up standard idx=11 name=PAL-K
pvrusb2: Set up standard idx=12 name=SECAM-B
pvrusb2: Set up standard idx=13 name=SECAM-D
pvrusb2: Set up standard idx=14 name=SECAM-G
pvrusb2: Set up standard idx=15 name=SECAM-H
pvrusb2: Set up standard idx=16 name=SECAM-K
pvrusb2: Set up standard idx=17 name=SECAM-K1
pvrusb2: Set up standard idx=18 name=SECAM-L
pvrusb2: Set up standard idx=19 name=SECAM-LC
pvrusb2: Initial video standard auto-selected to PAL-B/G
pvrusb2: Device initialization completed successfully.
pvrusb2: registered device video1 [mpeg]
DVB: registering new adapter (pvrusb2-dvb)
cx25840 4-0044: firmware: requesting v4l-cx25840.fw
cx25840 4-0044: unable to open firmware v4l-cx25840.fw
tda829x 4-0042: setting tuner address to 60
tda18271 4-0060: creating new instance
TDA18271HD/C2 detected @ 4-0060
tda18271: performing RF tracking filter calibration

Still the | v4l-cx25840.fw firmware file is missing. Get it and copy it to the appropriate firmware directory. On Gentoo you may unmask media-tv/linuxtv-dvb-firmware:

cat ~media-tv/linuxtv-dvb-firmware-2009.09.19 >> /etc/portage/package.keywords/linuxtv-dvb-firmware

if /etc/portage/package.keywords is an directory or

cat ~media-tv/linuxtv-dvb-firmware-2009.09.19 >> /etc/portage/package.keywords

if it is a file.

Add a new device section to /etc/make.conf:

cat DVB_CARDS="pvrusb2" >> /etc/make.conf
emerge -av media-tv/linuxtv-dvb-firmware

Now dmesg output should look like this:

usb 7-2: new high speed USB device using ehci_hcd and address 7                                                      
usb 7-2: New USB device found, idVendor=2040, idProduct=7300                                                         
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3                                                    
usb 7-2: Product: WinTV                                                                                              
usb 7-2: Manufacturer: Hauppauge                                                                                     
usb 7-2: SerialNumber: 7300-00-F06BBD71                                                                              
usb 7-2: configuration #1 chosen from 1 choice                                                                       
cx25840 4-0044: cx25843-24 found @ 0x88 (pvrusb2_a)                                                                  
pvrusb2: Attached sub-driver cx25840                                                                                 
tuner 4-0042: chip found @ 0x84 (pvrusb2_a)                                                                          
pvrusb2: Attached sub-driver tuner                                                                                   
cx25840 4-0044: firmware: requesting v4l-cx25840.fw                                                                  
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)                                                         
tveeprom 4-00a2: Hauppauge model 73219, rev D1F5, serial# 7060849                                                    
tveeprom 4-00a2: MAC address is 00-0D-FE-6B-BD-71                                                                    
tveeprom 4-00a2: tuner model is NXP 18271C2 (idx 155, type 54)                                                       
tveeprom 4-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)                 
tveeprom 4-00a2: audio processor is CX25843 (idx 37)                                                                 
tveeprom 4-00a2: decoder processor is CX25843 (idx 30)                                                               
tveeprom 4-00a2: has radio, has IR receiver, has IR transmitter                                                      
pvrusb2: Supported video standard(s) reported available in hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K         
pvrusb2: Mapping standards mask=0x3ff00ff (PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB)            
pvrusb2: Setting up 20 unique standard(s)
pvrusb2: Set up standard idx=0 name=PAL-B/G
pvrusb2: Set up standard idx=1 name=PAL-D/K
pvrusb2: Set up standard idx=2 name=SECAM-B/G
pvrusb2: Set up standard idx=3 name=SECAM-D/K
pvrusb2: Set up standard idx=4 name=PAL-B
pvrusb2: Set up standard idx=5 name=PAL-B1
pvrusb2: Set up standard idx=6 name=PAL-G
pvrusb2: Set up standard idx=7 name=PAL-H
pvrusb2: Set up standard idx=8 name=PAL-I
pvrusb2: Set up standard idx=9 name=PAL-D
pvrusb2: Set up standard idx=10 name=PAL-D1
pvrusb2: Set up standard idx=11 name=PAL-K
pvrusb2: Set up standard idx=12 name=SECAM-B
pvrusb2: Set up standard idx=13 name=SECAM-D
pvrusb2: Set up standard idx=14 name=SECAM-G
pvrusb2: Set up standard idx=15 name=SECAM-H
pvrusb2: Set up standard idx=16 name=SECAM-K
pvrusb2: Set up standard idx=17 name=SECAM-K1
pvrusb2: Set up standard idx=18 name=SECAM-L
pvrusb2: Set up standard idx=19 name=SECAM-LC
pvrusb2: Initial video standard auto-selected to PAL-B/G
pvrusb2: Device initialization completed successfully.
pvrusb2: registered device video1 [mpeg]
DVB: registering new adapter (pvrusb2-dvb)
cx25840 4-0044: firmware: requesting v4l-cx25840.fw
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tda829x 4-0042: setting tuner address to 60
tda18271 4-0060: creating new instance
TDA18271HD/C2 detected @ 4-0060
tda18271: performing RF tracking filter calibration