Hauppauge WinTV-NOVA-T USB: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (add link)
(added the relevant info from the old "Temporary USB Devices" article)
Line 5: Line 5:


==Overview/Features==
==Overview/Features==
This device is a rebadge of the DVB-T member of TechnoTrend's TT-PCline USB family of devices, which were USB1.1 based and of the, so called, "budget" category.
Based on a Texas Instruments [[DSP]] that remultiplexes the stream into a [[TechnoTrend]]-proprietary USB packet format and sends it as [[Isochronous USB Stream]] over the USB Bus.


It uses a Texas Instruments [[DSP]] that remultiplexes the stream into a [[TechnoTrend]]-proprietary USB packet format and sends it as [[Isochronous USB Stream]] over the bus.
Due to the limited [[Universal Serial Bus|USB 1.1]] [[Bus Bandwidth]] of about 12MBit only selected [[PID]]s can get transferred over the USB Bus to the Host. Some High-Bandwidth [[Transponder]]s don't work, [[HDTV]] receiption is not possible.

Due to the limited [[Bus Bandwidth|bus bandwidth]] provided by [[Universal Serial Bus|USB 1.1]], of approximately 12Mbps, only selected [[PID]]s can be transferred over USB to the host system. Consequently, some high bandwidth [[Transponder|transponders]] won't work, and [[HDTV]] reception is not possible.




===Components Used===
===Components Used===
* Alps TDMB7s tuner Module
* Alps TDMB7s tuner Module
** featuring a [[Conexant Systems, Inc.|Conexant]] [[Conexant CX22700|CX22700]] [[Demodulator]]
** featuring either a [[Conexant]] [[Conexant CX22700|CX22700]] or [[Philips]] [[Philips TDA10046|TDA10046]] ([[Demodulator|demodulator]] )
* [[TI AV711x|Texas Instruments AV711x]] [[DSP]]
* a [[Texas Instruments]] [[DSP]] (USB bridge)


===Identification===
output of ''lsusb -v'':


==Making it Work==


==Making it Work==
Requires a [[Firmware]] that needs to get peeled out of the Windows Driver.


===Firmware===
Requires a [[Firmware]], dvb-fe-tda10046.fw, that needs to get peeled out of the Windows Driver.


===Drivers===
The following drivers are needed for these devices:
- cx22700.ko
- tda1004x.ko
- dvb-ttusb-budget.ko


==External Links==
==External Links==

Revision as of 01:17, 15 November 2008

Hauppauge WinTV-NOVA-T USB

A DVB-T USB 1.1 device designed by TechnoTrend and sold by Hauppauge.

It is supported under Linux.

Overview/Features

This device is a rebadge of the DVB-T member of TechnoTrend's TT-PCline USB family of devices, which were USB1.1 based and of the, so called, "budget" category.

It uses a Texas Instruments DSP that remultiplexes the stream into a TechnoTrend-proprietary USB packet format and sends it as Isochronous USB Stream over the bus.

Due to the limited bus bandwidth provided by USB 1.1, of approximately 12Mbps, only selected PIDs can be transferred over USB to the host system. Consequently, some high bandwidth transponders won't work, and HDTV reception is not possible.


Components Used

Identification

output of lsusb -v:


Making it Work

Firmware

Requires a Firmware, dvb-fe-tda10046.fw, that needs to get peeled out of the Windows Driver.

Drivers

The following drivers are needed for these devices:

 - cx22700.ko
 - tda1004x.ko
 - dvb-ttusb-budget.ko

External Links