Maintaining Git trees
KERNEL DEVELOPMENT PROCEDURES FOR UPSTREAM
It is important that people understand how upstream development works.
Kernel development has 2 phases:
- 1) a merge window typically with 2 weeks (although Linus is gave some indications that he may reduce it on 2.6.34), starting with the release of a new kernel version;
- 2) the -rc period, where the Kernel is tested and receive fixes.
The length of the -rc period depends on the number and relevance of the fixes. Considering the recent history, it ranges from -rc6 to -rc8, where each -rc takes one week.
Those are the latest -rc kernels since 2.6.12:
|kernel||latest -rc version|
In general, the announcement of a new -rc kernel gives some hints when that -rc kernel may be the last one.
Subsystem procedures for merging patches upstream
The required procedure on subsystem trees is that:
a) During -rc period (e.g. latest main kernel available is 2.6.x, the latest -rc kernel is 2.6.[x+1]-rc<y>):
- fix patches for the -rc kernel (2.6.[x+1]) should be sent upstream, being a good idea to send them for some time at linux-next tree, allowing other people to test it, and check for potential conflicts with the other arch's;
- patches for 2.6.[x+2] should be sent to linux-next.
b) the release of 2.6.[x+1] kernel:
- closes the -rc period and starts the merge window.
c) During the merge window:
- the patch that were added on linux-next during the -rc period for 2.6.[x+2] should be sent upstream;
- new non-fix patches should be hold until the next -rc period starts, so, they'll be added on 2.6.[x+3];
- fix patches for 2.6.[x+2] should go to linux-next, wait for a few days and then send upstream.
d) the release of 2.6.[x+2]-rc1 kernel:
- the merge window has closed. No new features are allowed.
- the patches with new features that arrived during the merge window will be moved to linux-next
A practical example
Considering that, at the time this document were written, the last main release is 2.6.32, and the latest -rc release is 2.6.33-rc5, this means that:
- Stable patches, after adding upstream, are being received for 2.6.32 kernel series;
- Bug fixes are being received for kernel 2.6.33;
- New feature patches are being received for kernel 2.6.34.
After the release of kernel 2.6.33, starts the period for receiving patches for 2.6.35.
In other words, the features being developed are always meant to be included on the next 2 kernels.
In the specific case of new drivers that don't touch on existing features, it could be possible to send it during the -rc period, but it is safer to assume that those drivers should follow the above procedure, as a later submission may be nacked.
Patches for stable
Sometimes, a fix patch corrects a problem that happens also on stable kernels (e. g. on kernel 2.6.x or even 2.6.y, where y < x). In this case, the patch should be sent to firstname.lastname@example.org, in order to be added on stable kernels.
In the case of git-submitted patches with fixes, that also need to be send to stable, all the developer needs to do is to add, a the patch description:
At the moment the patch reaches upstream, a copy of the patch will be automatically be sent to the stable maintainer and will be considered for inclusion on the next stable kernel (2.6.x.y).
KERNEL DEVELOPMENT PROCEDURES FOR V4L/DVB
That's the RFC on how we should work with -git.
1) fixes and linux-next patches
One of the big problems of our model is that we're using just one tree/branch for everything, with mercurial. This makes hard to send some fix patches for 2.6.[x+1], as they may have conflicts with the patches for 2.6.[x+2]. So, when the conflict is simple to solve, the patch is sent as fixes. Otherwise, it generally is hold to the next cycle. The fix patches should be tagged by the developer with "Priority: high" on mercurial.
Unfortunately, sometimes people mark the driver with the wrong tag. For example, I merged on Jan, 22 a patch marked with "high" that doesn't apply at the fixes tree. This patch fix a regression introduced by a driver that weren't merged yet, so, the patch were added as normal patch.
How to solve those issues?
Well, basically, we should work with more than one tree (or branch), on upstream submission:
- a tree/branch with the fix patches;
- a tree/branch with the new feature patches.
So, the idea is that we'll use those two -git trees:
- http://linuxtv.org/git//v4l-dvb.git - Patches for linux-next
- http://linuxtv.org/git//fixes.git - Patches for upstream
While we'll keep accepting patches via -hg, due to the merge conflicts its mentioned, the better is that, even those developers that prefer to develop patches use the old way, to send us the fixes via -git. This way, if is there a conflict, he is the one that can better solve it. Also, it avoids the risk of a patch being wrongly tagged.
Also, after having a patch added on one of the above trees, we can't simply remove it, as others will be cloning that tree. So, the only option would be to send a revert patch, causing the patch history to be dirty and could be resulting on some troubles when submitting upstream. I've seen some nacks on receiving patches upstream from dirty git trees. So, we should really avoid this.
2) how to submit a -git pull request
As the same git tree may have more than one branch, and we'll have 2 -git trees for upstream, it is required that people specify what should be done. Internally, my workflow is based on different mail queues for each type of requesting I receive. I have some scripts here to automate the proccess, so it is important that everyone sends me -git pull requests at the same way.
So, I'm basically proposing that a -git pull request to be send with the following email tags:
From: <your real email> Subject: [GIT FIX FOR 2.6.33] Fixes for driver cx88 To: email@example.com
The from line may later be used by the git mailbomb script to send you a copy when the patch were committed, so it should be your real email.
The indication between  on the subject will be handled by my mailer to put the request at the right queue. So, if tagged wrong, it may not be committed.
Don't send a copy of the pull to my addresses. I'll be filtering based on the subject and on the mailing list. If you send a c/c to me, it will be simply discarded.
NEVER send a copy of any pull request to a subscribers-only mailing list. Everyone is free to answer to the email, reviewing your patches. Don't penalty people that wants to contribute with you with SPAM bouncing emails, produced by subscribers only lists.
When a patch touches on other subsystem codes, please copy the other subsystem maintainers. This is important for patches that touches on arch files, and also for -alsa non-trivial patches.
The email should be generated with the usage of git request-pull:
git request-pull $ORIGIN $URL
where $ORIGIN is the commit hash of the tree before your patches, and $URL is the URL for your repository.
For example, for the patches merged directly from -hg on my -git trees on Jan, 22 2010, the above commands will produce:
The following changes since commit 2f52713ab3cb9af2eb0f9354dba1421d1497f3e7: Abylay Ospan (1): V4L/DVB: 22-kHz set_tone fix for NetUP Dual DVB-S2-CI card. 22kHz logic controlled by demod are available in the git repository at: git://linuxtv.org/v4l-dvb.git master Andy Walls (4): V4L/DVB: cx25840, v4l2-subdev, ivtv, pvrusb2: Fix ivtv/cx25840 tinny audio V4L/DVB: ivtv: Adjust msleep() delays used to prevent tinny audio and PCI bus hang V4L/DVB: cx18-alsa: Initial non-working cx18-alsa files V4L/DVB: cx18-alsa: Add non-working cx18-alsa-pcm.[ch] files to avoid data loss Devin Heitmueller (20): V4L/DVB: xc3028: fix regression in firmware loading time V4L/DVB: cx18: rename cx18-alsa.c V4L/DVB: cx18: make it so cx18-alsa-main.c compiles V4L/DVB: cx18: export a couple of symbols so they can be shared with cx18-alsa V4L/DVB: cx18: overhaul ALSA PCM device handling so it works V4L/DVB: cx18: add cx18-alsa module to Makefile V4L/DVB: cx18: export more symbols required by cx18-alsa V4L/DVB: cx18-alsa: remove unneeded debug line V4L/DVB: cx18: rework cx18-alsa module loading to support automatic loading V4L/DVB: cx18: cleanup cx18-alsa debug logging V4L/DVB: cx18-alsa: name alsa device after the actual card V4L/DVB: cx18-alsa: remove a couple of warnings V4L/DVB: cx18-alsa: fix memory leak in error condition V4L/DVB: cx18-alsa: fix codingstyle issue V4L/DVB: cx18-alsa: codingstyle fixes V4L/DVB: cx18: codingstyle fixes V4L/DVB: cx18-alsa: codingstyle cleanup V4L/DVB: cx18-alsa: codingstyle cleanup V4L/DVB: cx18: address possible passing of NULL to snd_card_free V4L/DVB: cx18-alsa: Fix the rates definition and move some buffer freeing code. Ian Armstrong (1): V4L/DVB: ivtv: Fix race condition for queued udma transfers Igor M. Liplianin (4): V4L/DVB: Add Support for DVBWorld DVB-S2 PCI 2004D card V4L/DVB: dm1105: connect splitted else-if statements V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb V4L/DVB: dm1105: use macro for read/write registers JD Louw (1): V4L/DVB: Compro S350 GPIO change drivers/media/common/tuners/tuner-xc2028.c | 11 +- drivers/media/dvb/dm1105/Kconfig | 1 + drivers/media/dvb/dm1105/dm1105.c | 501 ++++++++++++++------------- drivers/media/video/cx18/Kconfig | 11 + drivers/media/video/cx18/Makefile | 2 + drivers/media/video/cx18/cx18-alsa-main.c | 293 ++++++++++++++++ drivers/media/video/cx18/cx18-alsa-mixer.c | 191 ++++++++++ drivers/media/video/cx18/cx18-alsa-mixer.h | 23 ++ drivers/media/video/cx18/cx18-alsa-pcm.c | 353 +++++++++++++++++++ drivers/media/video/cx18/cx18-alsa-pcm.h | 27 ++ drivers/media/video/cx18/cx18-alsa.h | 59 ++++ drivers/media/video/cx18/cx18-driver.c | 40 ++- drivers/media/video/cx18/cx18-driver.h | 10 + drivers/media/video/cx18/cx18-fileops.c | 6 +- drivers/media/video/cx18/cx18-fileops.h | 3 + drivers/media/video/cx18/cx18-mailbox.c | 46 +++- drivers/media/video/cx18/cx18-streams.c | 2 + drivers/media/video/cx25840/cx25840-core.c | 48 ++- drivers/media/video/ivtv/ivtv-irq.c | 5 +- drivers/media/video/ivtv/ivtv-streams.c | 6 +- drivers/media/video/ivtv/ivtv-udma.c | 1 + drivers/media/video/pvrusb2/pvrusb2-hdw.c | 1 + drivers/media/video/saa7134/saa7134-cards.c | 4 +- include/media/v4l2-subdev.h | 1 + 24 files changed, 1380 insertions(+), 265 deletions(-) create mode 100644 drivers/media/video/cx18/cx18-alsa-main.c create mode 100644 drivers/media/video/cx18/cx18-alsa-mixer.c create mode 100644 drivers/media/video/cx18/cx18-alsa-mixer.h create mode 100644 drivers/media/video/cx18/cx18-alsa-pcm.c create mode 100644 drivers/media/video/cx18/cx18-alsa-pcm.h create mode 100644 drivers/media/video/cx18/cx18-alsa.h
This helps to identify what's expected to be found at the -git tree and to double check if the merge happened fine.
3) Tags that a patch receive after its submission
This is probably the most complex issue to solve. So, I'd like to see some suggestions here.
Signed-off-by/Acked-by/Tested-by/Nacked-by tags may be received after a patch or a -git submission. This can happen even while the patch is being tested at linux-next, from people reporting problems on the existing patches, or reporting that a patch worked fine.
Also, the driver maintainer and the subsystem maintainer that is committing those patches should sign each one, to indicate that he reviewed and has accepted the patch.
Currently, if a new tag is added to a committed patch, its hash will change. I saw some discussions about allowing adding new tags on -git without changing the hash, but I think this weren't implemented (yet?).
The same problem occurs with -hg, but, as -hg doesn't support multiple branches (well, it has a "branch" command, but the concept of branch there is different), it was opted that the -hg trees won't have all the needed SOBs. Instead, those would be added only at the submission tree.
With -git, a better procedure can be used:
The developer may have two separate branches on his tree. For example, let's assume that the developer has the following branches on his tree:
- media-master (associated with "linuxtv" remote)
His development happens on devel branch. When the patches are ready to submission will be copied into a new for_submission branch: git branch for_submission devel
And a pull request from the branch "for_submission" will be sent.
Eventually, he'll write new patches on his devel branch.
After merged, the developer updates the linuxtv remote and drops the for_submission branch. This way, "media-master" will contain his patches that got a new hash, due to the maintainer's SOB. However, he has some new patches on his devel, that applies over the old hashes.
Fortunately, git has a special command to automatically remove the old objects: git rebase.
All the developer needs to do is to run the commands bellow:
|git remote update||to update his remotes, including "linuxtv"|
|git checkout devel||move to devel branch|
|git pull . media-master||to make a recursive merge from v4l/dvb upstream|
|git rebase media-master||to remove the legacy hashes|
After this, his development branch will contain only upstream patches + the new ones he added after sending the patches for upstream submission.