OpenBox: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
 
(One intermediate revision by the same user not shown)
Line 7: Line 7:
== [[DVB-S2]] ==
== [[DVB-S2]] ==
* 2x [[STMicroelectronics|ST]] [[ST STV6110A|STV6110]] [[Tuner]]s
* 2x [[STMicroelectronics|ST]] [[ST STV6110A|STV6110]] [[Tuner]]s
* 1x [[STMicroelectronics|ST]] [[STMicroelectronics_STV0900|STV0900]] [[Demodulator]]
* 1x [[STMicroelectronics|ST]] [[STMicroelectronics_STV0900|STV0900]] Dual [[Demodulator]]

= 1200 series =
* J1: FPGA_JTAG (nofit)
* J2: MicroSD
* J3: JTAG for U3 (nofit)
* J4: Interface to SOM J4
* J5: HDMI Out
* J6: Interface to SOM J6
* J7: USB-B (nofit)
* J8: USB-A #1
* J9: USB-A #2
* J10: USB-A #3
* J11: Internal USB (USB-A #4)
* J12: SCART
* J13: LVDS out
* J14: 12v Power
* J15: MicroSD
* J16: Loudspeaker
* J17: SVIDEO (nofit)
* J18: Keypad
* J19: Inverter
* J20: CIR & LED
* J21: UART for U3
* J22: 5v Power (nofit)

* JP1: Interface to SOM
* JP2: Expansion (20 pin)
* JP3: Audio out (nofit)
* JP4: Audio in (nofit)
* JP5: Tuner
* JP6: Expansion (20 pin)
* JP7: Jumper - voltage select for tuner (nofit)

* U1: FPGA
* U2: Bus transceiver (74LVC245)
* U3: ARM Cortex-M3 Microcontroller (LM3S6965-IQC)
* U4: Ethernet connector (active)
* U5: LDO (nofit)
* U6: Sil9022/9024ARBT HDMI Transmitter
* U7: Current limiter, HDMI (FPF2116)
* U8: Current limiter, USB (TPS2044BD)
* U9: 4-port USB hub (USB2504A-JT)
* U10: 1W Mono amp (TDA7052A)
* U11: 1W Mono amp (TDA7052A)
* U12: 8-40v input to 5v output voltage regulator
* U13: 5v input to 2.5v output regulator (TPS73025DBVT)
* U14: 5v input to 3.3v outpt regulator (TLV1117-33CDCY)
* U15: 5v input to 1.8v output regulator (TLV1117-33CDCY)
* U16: Quad Op-Amp (LM324APWR)
* U17: LDO (nofit)
* U18: On-board IR receiver (nofit)

Latest revision as of 20:52, 1 December 2009

OpenBox is an Open Source receiver STB from a German company by the same name. The Frontend is on a separate card that plugs into the mainboard and there are at least two different cards available:

DVB-C

DVB-S2

1200 series

  • J1: FPGA_JTAG (nofit)
  • J2: MicroSD
  • J3: JTAG for U3 (nofit)
  • J4: Interface to SOM J4
  • J5: HDMI Out
  • J6: Interface to SOM J6
  • J7: USB-B (nofit)
  • J8: USB-A #1
  • J9: USB-A #2
  • J10: USB-A #3
  • J11: Internal USB (USB-A #4)
  • J12: SCART
  • J13: LVDS out
  • J14: 12v Power
  • J15: MicroSD
  • J16: Loudspeaker
  • J17: SVIDEO (nofit)
  • J18: Keypad
  • J19: Inverter
  • J20: CIR & LED
  • J21: UART for U3
  • J22: 5v Power (nofit)
  • JP1: Interface to SOM
  • JP2: Expansion (20 pin)
  • JP3: Audio out (nofit)
  • JP4: Audio in (nofit)
  • JP5: Tuner
  • JP6: Expansion (20 pin)
  • JP7: Jumper - voltage select for tuner (nofit)
  • U1: FPGA
  • U2: Bus transceiver (74LVC245)
  • U3: ARM Cortex-M3 Microcontroller (LM3S6965-IQC)
  • U4: Ethernet connector (active)
  • U5: LDO (nofit)
  • U6: Sil9022/9024ARBT HDMI Transmitter
  • U7: Current limiter, HDMI (FPF2116)
  • U8: Current limiter, USB (TPS2044BD)
  • U9: 4-port USB hub (USB2504A-JT)
  • U10: 1W Mono amp (TDA7052A)
  • U11: 1W Mono amp (TDA7052A)
  • U12: 8-40v input to 5v output voltage regulator
  • U13: 5v input to 2.5v output regulator (TPS73025DBVT)
  • U14: 5v input to 3.3v outpt regulator (TLV1117-33CDCY)
  • U15: 5v input to 1.8v output regulator (TLV1117-33CDCY)
  • U16: Quad Op-Amp (LM324APWR)
  • U17: LDO (nofit)
  • U18: On-board IR receiver (nofit)