LinuxTVWiki - User contributions [en]

User talk:Ge0rgecz

2013-02-20T17:43:23Z

Wirbel:

Somebody block this vandal. [[User:VandalRV|VandalRV]] 18:16, 20 February 2013 (CET)

: 'Evolve Mars' seems to be an DVB-T Stick [http://www.evolve.cz/photos/1/UserFiles/Image/EVOLVE_Mars.jpg]

Saa713x devices

2012-06-30T09:13:24Z

Wirbel: /* LifeView */

saa713x devices are collectively those PCI cards that are based upon one of the [[Philips SAA7134|SAA713x]] chips, and which are supported under Linux by the saa7134 and associated kernel driver modules.

==saa7134 and associated kernel driver modules==
TV cards based on the saa713x chips are well supported by the saa7134 driver. The picture quality is typically high, and the sound can be taken directly from the TV card or through a patch cable to your sound card. On the [[text_capture | text capture]] front, both teletext and NTSC closed captioning are supported.

===Sound support===
Support for DMA sound, or sound taken directly off the PCI bus, has improved in the 2.6.16 kernel, thanks to the work of Ricardo Cerqueira and others. There are now two separate drivers for DMA sound, saa7134-alsa and saa7134-oss. In order to enable these in the kernel, you must first have selected support for ALSA and/or OSS under Sound. If you build both DMA devices as modules, you can use both alternately, though they cannot both be loaded at the same time.

While the saa7134-oss is listed as deprecated, there are still programs that have difficulties using ALSA's device enumeration, and the oss module remains useful.

These modules do not require parameters during insertion. For details and sound problems see [[saa7134-alsa]].

==Supported saa713x devices==
An up-to-date list of saa713x devices supported by V4L-DVB drivers is found in the [http://linuxtv.org/hg/v4l-dvb/file/tip/linux/Documentation/video4linux/CARDLIST.saa7134 CARDLIST.saa7134] file in the master development repository.

Devices supported by the kernel running on your system are listed in your local <code><path_to_your_kernel_sources>/Documentation/video4linux/CARDLIST.saa7134</code>. If you don't find your device listed here, but support for it is cited in the up-to-date sources (see above), then you will need to either upgrade to a more recent kernel that has already absorbed support for the device or, more simply, just get the latest V4L-DVB drivers. You can install the V4L-DVB modules on top of your existing kernel (see: [[How to Obtain, Build and Install V4L-DVB Device Drivers|detailed instructions]]), however, note that support for some devices may also require use of a newer kernel.

===Getting an unlisted card to work===
If your card is not listed, see the "[[Development: How to add support for a device|How to add support for a device]]" article.
----
this part needs to be edited:
* ask for assistance on the [https://listman.redhat.com/mailman/listinfo/video4linux-list v4l mailing list]
* [http://marc.theaimsgroup.com/?l=linux-video searchable archives].
* It may be a clone of a listed card ... card= entries may work for several similar cards.
* Full card names can be cross-referenced from drivers/media/video/saa7134/saa7134-cards.c.

Before buying a new TV card, it's always worth checking its support status on V4L documentation. However, be advised that, since some producers label with the same product name boards that, inside, are actually different, there is always some risk of buying an un- (or non-completely) supported card even if it appears to be. Spending some more time searching newsgroups and mailing lists for complaints is recommended.

Make sure you post the findings of your investigations here and on the video4linux mailing list (video4linux-list@redhat.com) so that saa7134-cards.c can be updated with a new card= entry for your card.

==Installation notes==
See [[Saa713x devices: Generic SAA7134 Card Installation]] for how to properly setup your saa7134-based tv tuner card or use the installation instructions for your specific card:

=== [[ASUS]] ===
* [[ASUS P7131 Dual]]
* [[ASUS My Cinema-P7131 Hybrid|ASUS P7131 Hybrid]]
* [[ASUS TV-FM 7133]]
* [[ASUS TV-FM 7135]]
* [[ASUSTeK P7131 Dual]]
* [[ASUS Digimatrix TV]]
* [[Asus Europa2 OEM]]
* [[ASUS P7131 4871]]
* [[ASUSTeK P7131 Analog]]
* [[Asus Tiger 3in1]]
* [[Asus Tiger Rev:1.00]]

=== [[AVerMedia]] ===
As described in [[AVerMedia AVerTV_305/307_Linux_user_guide|AVerTV 305/307 Linux user guide (Russian language)]], the following cards are supported:
* AVerTV 305
* AVerTV Studio 305
* AVerTV 307
* AVerTV Studio 307
In addition, the following cards are known to work:
* [[AVerMedia Cardbus E500]]
* [[AVerMedia Cardbus Plus E501R |AVerMedia Cardbus Plus E501R (russian)]]
* [[AverMedia M156 / Medion 2819]]
* [[AVerMedia DVD EZMaker]]
* [[AVerMedia AVerTV GO 007]]
* [[AVerMedia AVerTV GO 007 FM]]
* [[AVerMedia AVerTVHD MCE A180]]
* [[AVerMedia AVerTV Hybrid+FM Cardbus (E506R)]]
* [[AVerMedia AVerTV Hybrid+FM PCI (A16D)]]
* [[AverMedia M103 (Hybrid) Mini PCI]]
*[[AverMedia M156]]
*[[AVerMedia DVD EZMaker]]
*[[AVerMedia AVerTVHD MCE A180]]
*[[AVerMedia A169 B]]
*[[AVerMedia A169 B1]]
*[[AVerMedia TV Hybrid A16A]]
*[[Avermedia AVerTV Studio 507]]
*[[Avermedia M102]]
*[[Avermedia Super 007]]
*[[Avermedia M115]]
*[[Avermedia DVB-S Pro A700]]
*[[Avermedia DVB-S Hybrid+FM A700]]
*[[AVerMedia MiniPCI DVB-T Hybrid M103]]
*[[Avermedia PCI pure analog (M135A)]]
*[[Avermedia AVerTV GO 007 FM Plus]]
*[[Avermedia AVerTV Studio 507UA]]

=== Bona ===
The brand is also refered to as Mentor. [http://www.bona.com.tw:8080/ Bona Website]
* [[Bona TV-PCI]]

=== Canopus ===
* [[Canopus KTVX-CB (aka ITACHU) CardBus|KTVX-CB (aka ITACHU) CardBus]]

=== Compro ===
* [[Compro Videomate T750]]
* [[Compro VideoMate T300]]
* [[Compro VideoMate DVB-T220]]
* [[Compro VideoMate T200a]]
* [[Compro VideoMate T200]]
* [[Compro VideoMate TV Gold-Plus]]
* [[Compro VideoMate TV PVR/FM]]
* [[Compro VideoMate TV Gold-Plus PAL]]
* [[Compro VideoMate S350]]
* [[Compro VideoMate TV Gold+II]]
* [[Compro VideoMate Vista M1F]]

=== Encore ===
* [[Encore USA ELNTV-FM]]
* [[Encore ENLTV]]
* [[Encore ENLTV-FM v5.3]]

=== Hercules ===
* [[Hercules Smart TV 3]]

=== KNC One (KNC1) ===
* [[KNC One TV-Station DVR]]
* [[KNC One TV-Station RDS]] / Typhoon TV Tuner RDS

=== KWorld ===
* [[KWorld ATSC 110|ATSC-110]]
* [[KWorld Studio TV Terminator|Studio TV Terminator]] (a.k.a. Global TV Terminator)
* [[KWorld NB-TV 100 CardBus|NB-TV 100 CardBus]]
* [[KWorld DVB-T 220|DVB-T 220]]
* [[Kworld/KuroutoShikou SAA7130-TVPCI]]
* [[Kworld/Tevion V-Stream Xpert TV PVR7134]]
* [[Kworld Xpert TV PVR7134]]
* [[KWorld DVB-T 210]]
* [[Kworld Plus TV Analog Lite PCI]]
* [[Kworld PCI Analog TV Card Lite]]

=== LifeView ===
* [[LifeView FlyVideo2000|FlyVideo2000]]
* [[LifeView FlyVideo3000FM NTSC|FlyVideo3000FM and FlyVideo3000]]
* [[LifeView FlyVideo3000 PAL-N|FlyVideo3000 PAL-N]]
* [[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]
* [[LifeView FlyDVB-T Hybrid CardBus|FlyDVB-T Hybrid CardBus]]
* [[LifeView FlyDVB-T Duo CardBus|FlyDVB-T Duo CardBus]]
* [[LifeView FlyTV Platinum|FlyTV Platinum]]

=== MSI ===
* [[MSI TV@nywhere A/D NB|TV@nywhere A/D NB]]
* [[MSI TV@nywhere Duo]]
* [[MSI TV@Anywhere plus]]
* [[MSI TV@nywhere A/D v1.1]]

=== Mercury ===

* [[Mercury TV Tuner card PAL/Mecury EzView tuner card (Philips chipset)]]
* [[Mercury TV PAL]]

=== Pearl ===

* [[Auvisio TV Tuner & Video Capture Card]]

=== Pinnacle ===
* [[Pinnacle PCTV 40i]]
* [[Pinnacle PCTV 50i]]
* [[Pinnacle PCTV 110i]]
* [[Pinnacle PCTV 300i]]
* [[Pinnacle PCTV (310i)]]
* [[Pinnacle PCTV Stereo]]
* [[Pinnacle PCTV Stereo XE]]

=== Sabrent ===
* [[Sabrent SBT-TVFM]]
* [[Sabrent TV-PCIRC]]
* [[Sabrent PCMCIA TV-PCB05]]

=== TerraTec ===
* [[Terratec Cinergy 200 TV]]
* [[TerraTec Cinergy 250 PCI|Cinergy 250 PCI]]
* [[TerraTec Cinergy 400|Cinergy 400]]
* [[TerraTec Cinergy 400TV mobile|Cinergy 400TV mobile]]
* [[TerraTec Cinergy 600|Cinergy 600]]
* [[TerraTec Cinergy HT PCI|Cinergy HT PCI]]
* [[Terratec Cinergy HT PCMCIA]]
* [[TerraTec Cinergy HT Express]]

=== Tevion ===
* [[Tevion MD 9717]]
* [[Tevion DVBT-220RF]]
* [[Tevion V-Stream Xpert TV PVR7134]]

=== Vivanco ===
* [[Vivanco Cardbus DVB-T]]

=== Other ===
* [[Smartv_card |SmartTV Card]]
* [http://techcomindia.com/itemdetail.asp?Cat=&CatID=&prodid=501&ProdName=SSD%2DTV%2D670 TECH-COM, Card Model: SSD-TV-670 ]
* [[Zolid Hybrid TV Tuner|Zolid Hybrid TV Tuner]]

==External Links==
* [http://en.gentoo-wiki.com/wiki/Saa7134 Gentoo Wiki's saa7134 article]
[[Category:Hardware]]

LifeView FlyVideo2000

2012-06-30T09:11:15Z

Wirbel: removed redirect; translate turkisch to english.

lspci:
02:01.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

* need to specify card by driver option

options saa7134 card=3 tuner=5

File:TBS6618.jpg

2012-06-30T09:02:45Z

Wirbel: TBS6618 DVB-C TV Tuner CI PCIe Card

TBS6618 DVB-C TV Tuner CI PCIe Card

2012-06-30T09:00:53Z

Wirbel:

TBS6618 PCIe DVB-C TV Tuner CI Card, built with Common Interface which allows insertion of CAM and smartcard for pay TV, is a good choice for watching/recording digital cable HD TV on PC.It's ready for the latest Linux kernels.

[[File:TBS6618.jpg|thumb|240px]]

===Overview/Features===

*Watch Cable TV & listen to Radio on PC
*DVB-C SD or HD TV Receiving
*Real Time and Scheduled Program Recording(PVR)
*Time Shifting to Pause Live TV
*Common Interface Support
*Linux MythTV, VDR, XBMC Support

===Components Used===
*SAA7160ET
*TDA10024
*TDA18252

===Identification===

02:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03)
Subsystem: Device 6618:0001
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fdd00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: SAA716x TBS
Kernel modules: saa716x_tbs-dvb

===Making it work===

I.1 extract linux-tbs-drivers.tar.bz2 archive:

# tar xjvf linux-tbs-drivers.tar.bz2

I.2 go to driver package directory:

# cd linux-tbs-drivers

I.3 build and install the driver:

# make && make install

I.4 reboot in order to load the newly installed driver:

# shutdown -r now

===Drivers===
Available [http://www.tbsdtv.com/english/Download.html here]. Look for the TBS6618 Latest Linux driver

===Sample Kernel Output===
*[ 14.588222] input: saa716x IR (TurboSight TBS 6618) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/rc/rc0/input3
*[ 14.588290] rc0: saa716x IR (TurboSight TBS 6618) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/rc/rc0
*[ 14.588372] input: MCE IR Keyboard/Mouse (saa716x) as /devices/virtual/input/input4
*[ 14.588455] rc rc0: lirc_dev: driver ir-lirc-codec (saa716x) registered at minor = 0
*[ 14.588459] DVB: registering new adapter (SAA716x dvb adapter)
*[ 14.820821] TurboSight TBS6618 DVB-C card MAC=00:22:ab:b2:01:1b
*[ 14.836148] tbsci: Initializing TBS 6618
*[ 14.836280] tbsci: Adapter 0 CI initialized
*[ 14.836283] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6618 DVBC frontend)...

===External Links===

* [http://www.tbsdtv.com/products/tbs6618-dvb-c-tv-tuner-ci-pcie-card.html TBS6618 Product page]
* [http://www.tbsdtv.com/forum/index.php TBS Support forum]
* [http://www.buydvb.net/tbs6618-dvbc-tv-tuner-ci-pcie-card_p77.html Where to buy]

[[Category:DVB-C PCIe Cards]]

TBS5880 USB DVB-T2/T/C CI hybrid TV Box

2012-06-30T08:58:02Z

Wirbel: now displaying image.

TBS5880 is a hybrid digital TV external box with both DVB-T2/T tuner and DVB-C tuner. You can use it for watching or recording digital terrestrial or cable TV on PC. The integrated CI support makes it possible to watch Pay TV(By inserting the correct CAM and subscription smartcard into the CI slot, premium channels will be available). The manufacturer provides Linux driver up to the latest kernel.

[[File:TBS5880.jpg|thumb|240px]]

===Overview/Features===

*Watch Digital TV & listen to Radio on PC
*DVB-T2/T/C SD or HD TV Receiving
*Real Time and Scheduled Program Recording(PVR)
*Time Shifting to Pause Live TV
*Common Interface Support

===Components Used===
*DNOT44QCH266A
*CY7C68013

===Identification===

'''Device Descriptor:'''
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x734c TBS Technologies China
idProduct 0x5880
bcdDevice 0.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1

'''Configuration Descriptor:'''
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA

'''Interface Descriptor:'''
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
''' Endpoint Descriptor:'''
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0

===Making it work===

I.1 extract linux-tbs-drivers.tar.bz2 archive:

# tar xjvf linux-tbs-drivers.tar.bz2

I.2 go to driver package directory:

# cd linux-tbs-drivers

I.3 build and install the driver:

# make && make install

I.4 reboot in order to load the newly installed driver:

# shutdown -r now

===Drivers===
Available [http://www.tbsdtv.com/english/Download.html here]. Look for the TBS5880 Latest driver

===Sample Kernel Output===

''' dvb-usb: no frontend was attached by 'TBS 5880 CI USB2.0''''
* [ 160.019741] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/input/input4
* [ 160.019828] dvb-usb: schedule remote query interval to 150 msecs.
* [ 160.019834] dvb-usb: TBS 5880 CI USB2.0 successfully initialized and connected.
* [ 160.019868] usbcore: registered new interface driver tbs5880
* [ 160.044480] dvb-usb: TBS 5880 CI USB2.0 successfully deinitialized and disconnected.
* [ 161.660020] usb 1-7: new high speed USB device number 4 using ehci_hcd
* [ 161.793006] dvb-usb: found a 'TBS 5880 CI USB2.0' in cold state, will try to load a firmware
* [ 161.796028] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5880.fw'
* [ 161.799293] tbs5880: start downloading TBS5880 CI firmware
* [ 161.916027] dvb-usb: found a 'TBS 5880 CI USB2.0' in warm state.
* [ 161.916106] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
* [ 161.916224] DVB: registering new adapter (TBS 5880 CI USB2.0)
* [ 162.140206] dvb-usb: MAC address: 00:22:ab:b1:00:0d
* [ 162.169705] tbs5880: Attached TBS5880FE!
* [ 162.169708]
* [ 162.169934] tbs5880: CI initialized.
* [ 162.170205] tbs5880: CI disabled.
* [ 162.170210] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5880 DVBT/T2 frontend)...
* [ 162.170546] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/input/input5
* [ 162.170607] dvb-usb: schedule remote query interval to 150 msecs.
* [ 162.170612] dvb-usb: TBS 5880 CI USB2.0 successfully initialized and connected.'''

===External Links===

* [http://www.buydvb.net/tbs5880-usb-dvbt2tc-ci-tv-box_p69.html TBS5880 Product page]
* [http://www.tbsdtv.com/forum/index.php TBS Support forum]

[[Category:DVB-T2 USB Device]]

File:TBS5880.jpg

2012-06-30T08:57:11Z

Wirbel: TBS5880 USB DVB-T2/T/C CI hybrid TV Box

TBS5880 USB DVB-T2/T/C CI hybrid TV Box

TBS5280 USB DVB-T2/T/C Dual Tuner TV Box

2012-06-30T08:53:03Z

Wirbel: now displaying image correctly.

TBS 5280 is an USB interface digital terrestrial TV box with two tuners for watching and recording Freeview SD or HD channels on PC. The two tuners enable you to watch TV channel on one multiplex while recording another channel on another multiplex simultaneously. It’s ready with Linux driver up to the latest kernel.

[[File:TBS5280.jpg|thumb|240px]]

===Overview/Features===

* 1 x USB2.0 Interface
* Watch and record DVB T/T2 Freeview SD& HD Channels
* Dual Tuner for Recording Two Different Channels/Multiplexes
* DiSEqC 2.x Compliant
* Linux Support

===Components Used===

* DNOT44QCH266A
* CX23102

===Identification===
Bus 001 Device 003: ID 734c:5280 TBS Technologies China

===Making it work===

I.1 extract linux-tbs-drivers.tar.bz2 archive:

# tar xjvf linux-tbs-drivers.tar.bz2

I.2 go to driver package directory:

# cd linux-tbs-drivers

I.3 build and install the driver:

# make && make install

I.4 reboot in order to load the newly installed driver:

# shutdown -r now

===Drivers===
Available [http://www.tbsdtv.com/english/Download.html here]. Look for the TBS5280 Latest Linux driver

===Sample Kernel Output===

* [ 18.095640] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 18.326018] DVB: registering new adapter (cx231xx #0)
* [ 18.326026] DVB: registering adapter 1 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 18.326424] Successfully loaded cx231xx-dvb
* [ 18.326634] cx231xx: Cx231xx dvb Extension initialized
* [ 19.569983] init: plymouth-stop pre-start process (1319) terminated with status 1
* [ 26.668569] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
* [ 26.668761] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
* [ 34.910944] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
* [ 37.112008] eth0: no IPv6 routeDVB: registering new adapter (cx231xx #0)
* [ 18.095640] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 18.326018] DVB: registering new adapter (cx231xx #0)
* [ 18.326026] DVB: registering adapter 1 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 18.326424] Successfully loaded cx231xx-dvb
* [ 18.326634] cx231xx: Cx231xx dvb Extension initialized
* [ 19.569983] init: plymouth-stop pre-start process (1319) terminated with status 1
* [ 26.668569] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
* [ 26.668761] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
* [ 34.910944] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
* [ 37.112008] eth0: no IPv6 routers present
* [ 81.939382] usb 1-7: USB disconnect, device number 2
* [ 82.035647] cx231xx #0: V4L2 device vbi0 deregistered
* [ 82.035702] cx231xx #0: V4L2 device video0 deregistered
* [ 87.456021] usb 1-7: new high speed USB device number 3 using ehci_hcd
* [ 87.609552] Registered IR keymap rc-tbs-nec

* [ 87.609685] input: TurboSight TBS 5280 (cx231xx) MCE IR (734c:5280) as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/rc/rc1/input6
* [ 87.609771] rc1: TurboSight TBS 5280 (cx231xx) MCE IR (734c:5280) as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/rc/rc1
* [ 87.609905] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input7
* [ 87.610075] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
* [ 87.610352] mceusb 1-7:1.0: Registered Turbosight Technolog on usb1:3
* [ 87.614359] cx231xx #0: New device Turbosight Technolog @ 480 Mbps (734c:5280) with 7 interfaces
* [ 87.614365] cx231xx #0: registering interface 1
* [ 87.614420] cx231xx #0: Identified as TurboSight TBS 5280 (card=16)
* [ 87.759225] cx25840 14-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
* [ 87.777256] cx25840 14-0044: Firmware download size changed to 16 bytes max length
* [ 89.690261] cx25840 14-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
* [ 89.721493] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.2
* [ 89.788833] cx231xx #0: cx231xx #0/0: registered device video0 [v4l2]
* [ 89.788891] cx231xx #0: cx231xx #0/0: registered device vbi0
* [ 89.788895] cx231xx #0: V4L2 device registered as video0 and vbi0
* [ 90.009223] DVB: registering new adapter (cx231xx #0)
* [ 90.009229] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 90.229237] DVB: registering new adapter (cx231xx #0)
* [ 90.229244] DVB: registering adapter 1 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 90.229690] Successfully loaded cx231xx-dvb
rs present
* [ 81.939382] usb 1-7: USB disconnect, device number 2
* [ 82.035647] cx231xx #0: V4L2 device vbi0 deregistered
* [ 82.035702] cx231xx #0: V4L2 device video0 deregistered
* [ 87.456021] usb 1-7: new high speed USB device number 3 using ehci_hcd
* [ 87.609552] Registered IR keymap rc-tbs-nec
* [ 87.609685] input: TurboSight TBS 5280 (cx231xx) MCE IR (734c:5280) as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/rc/rc1/input6
* [ 87.609771] rc1: TurboSight TBS 5280 (cx231xx) MCE IR (734c:5280) as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/rc/rc1
* [ 87.609905] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input7
* [ 87.610075] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
* [ 87.610352] mceusb 1-7:1.0: Registered Turbosight Technolog on usb1:3
* [ 87.614359] cx231xx #0: New device Turbosight Technolog @
480 Mbps (734c:5280) with 7 interfaces
* [ 87.614365] cx231xx #0: registering interface 1
* [ 87.614420] cx231xx #0: Identified as TurboSight TBS 5280 (card=16)
* [ 87.759225] cx25840 14-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
* [ 87.777256] cx25840 14-0044: Firmware download size changed to 16 bytes max length
* [ 89.690261] cx25840 14-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
* [ 89.721493] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.2
* [ 89.788833] cx231xx #0: cx231xx #0/0: registered device video0 [v4l2]
* [ 89.788891] cx231xx #0: cx231xx #0/0: registered device vbi0
* [ 89.788895] cx231xx #0: V4L2 device registered as video0 and vbi0
* [ 90.009223] DVB: registering new adapter (cx231xx #0)
* [ 90.009229] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 90.229237] DVB: registering new adapter (cx231xx #0)
* [ 90.229244] DVB: registering adapter 1 frontend 0 (TurboSight TBS 5280 DVBT/T2 frontend)...
* [ 90.229690] Successfully loaded cx231xx-dvb

===External Links===

* [http://www.buydvb.net/tbs5280-usb-dvbt2t-dual-tuner-tv-box_p70.html TBS5680 Product page]
* [http://www.tbsdtv.com/forum/index.php TBS Support forum]

[[Category:DVB-T2 USB Device]]

File:TBS5280.jpg

2012-06-30T08:42:23Z

Wirbel: TBS5280 USB DVB-T2/T/C Dual Tuner TV Box

TBS5280 USB DVB-T2/T/C Dual Tuner TV Box

Tech-Com

2012-03-28T06:58:01Z

Wirbel: Reverted edits by TheLeaders (talk) to last revision by Jimbley

Tech-Com is the brand name with which Shree Sagarmatha Distributors Pvt. Ltd. (SSD), an Indian computer hardware reseller company, markets the products that it redistributes.

==Devices==
* [[Tech-Com SSD-TV-670|SSD-TV-670]]

==External Links==
* [http://techcomindia.com/ Tech-Com homepage]
[[Category:Vendor]]

Pinnacle

2012-01-23T11:36:06Z

Wirbel:

Pinnacle Systems Inc, founded in Mountain View, California, in 1986, is a designer and manufacturer of PC based analog and digital video capture devices.

Pinnalce concentrated mostly on video post-production products and tools up until 1997, but later expanded their product capabilities through purchase of video capture technology specialist [[miro |miro Digital Video Products]].

Notable Pinnacle video capture products include the Dazzle and PCTV product lines. The origin of the PCTV name itself can be traced back to a single device from miro; the miroMEDIA PCTV.

Pinnacle itself was acquired, in August 2005, by Avid Technology, Inc, under whose ownership it continues to operate as a standalone division. On October 29, 2008, Avid in turn sold their Pinnacle PCTV product range and related assets to [[Hauppauge]], with the transaction expected to close before the end of Q4 2008. Hauppauge is apparently intending to continue to market the Pinnacle range of devices under the PCTV brand line, see [http://www.pctvsystems.com pctvsystems]

== Devices ==

Here's what the mostly DVB-T USB device database knows:

{{Device_List_Medium_Detail/Header
| content =
{{USB_Device_Data|renderwith=Device_List_Medium_Detail/Row
|selatt1=vendor
|selval1=Pinnacle
}}
}}

'''Note:''' The following is incomplete, may be inaccurate and needs improving ... LinuxTV support vs. 3rd party support (mrec) seems to have been intertwined.

Supported:
* [[Pinnacle PCTV Pro|PCTV Pro]]
* [[Pinnacle PCTV Stereo|PCTV Stereo]]
* [[Pinnacle PCTV 50i]]
* [[Pinnacle PCTV (310i)]]
* [[Pinnacle PCTV HD Stick (801eSE)|PCTV HD Stick (801eSE)]]
* [[Pinnacle PCTV HD Pro Stick (800e)|PCTV HD Pro Stick (800e)]]
* [[Pinnacle PCTV HD Pro Stick (801e)|PCTV HD Pro Stick (801e)]]
* [[Pinnacle PCTV HD Card (800i)|PCTV HD Card (800i)]] [http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+HD+Card.htm Official Product Page]
* [[Pinnacle_PCTV_72e|Pinnacle PCTV Stick (72e)]]
* [[Pinnacle PCTV nano Stick (73e)|PCTV nano Stick (73e)]]
* Pinnacle Dazzle DVD Recorder (USB) (DVC-90/DVC-100)
* [[Pinnacle PCTV nanoStick T2 (290e)|PCTV nano Stick T2 (290e)]]

Work in progress:
* [[Pinnacle PCTV Hybrid Pro Card (310c)|PCTV Hybrid Pro Card (310c)]]
* [[Pinnacle PCTV Hybrid Pro Stick (330e)|PCTV Hybrid Pro Stick (330e)]]
* [[Pinnacle PCTV Hybrid Pro Stick 340e|PCTV Hybrid Pro Stick (340e)]]
* [[PCTV picoStick 74e|PCTV picoStick (74e)]]
* [[Pinnacle PCTV HD Mini Stick (80e)|PCTV HD Mini Stick (80e)]]

Currently not supported:
* [[Pinnacle PCTV USB (310e)|PCTV USB (310e)]]
* [[Pinnacle PCTV 60e|PCTV 60e]]
* Pinnacle Studio series ([[Pinnacle_Studio_700|Studio 700 PCI/USB (MovieBoard/Box Plus)]], [[Pinnacle_Studio_500|Studio 500 PCI/USB (MovieBoard/Box)]])
* Pinnacle Dazzle Video Creator (USB, Digital Video Creator 130)
* [[Pinnacle Dazzle Video Creator (DVC170)|Pinnacle Dazzle Video Creator Platinum]] (USB, Digital Video Creator 150, 170)
* [[Pinnacle PCTV HD Ultimate Stick (880e)|PCTV HD Ultimate Stick (880e)]]

Not supported, based on [[Saa7162 devices|Saa7162]]
* Pinnacle PCTV Dual Hybrid Pro PCIe (3010iX)
* Pinnacle PCTV Dual Sat Pro PCI (???)

Unknown:
* Pinnacle PCTV USB Stick
* Pinnacle PCTV Sat Pro USB (???)
* Pinnacle PCTV Sat Pro PCI (???)
* [[Pinnacle PCTV 200e|PCTV 200e]]
* [[Pinnacle PCTV 400e|PCTV 400e]]
* [[Pinnacle PCTV Dual DVB-T Diversity (2000e)|PCTV Dual DVB-T Diversity (2000e)]]
* [[Pinnacle PCTV Dual DVB-T Diversity Stick (2001e)|PCTV Dual DVB-T Diversity Stick (2001e)]]
* [[Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)|PCTV Dual Hybrid Pro PCI Express (3010i)]]
* [[Pinnacle PCTV 7010iX|PCTV 7010iX]]
* [[Pinnacle PCTV Sat CI|PCTV Sat CI]]
* and more...

==External Links==
* Actual Pinnacle Brand [http://www.pctvsystems.com '''PCTV Systems''']
* [http://www.pinnaclesys.com/PublicSite/uk/Home/ Pinnacle UK website]
* [http://www.pinnaclesys.com/PublicSite/us/Home/ Pinnacle US website]
* [http://forums.pinnaclesys.com/forums/default.aspx?GroupID=7 Pinnacle support forums]
** [http://www.avid.com/ Avid Technology homepage]; Pinnacle's parent company

[[Category:Vendor]]

Dvbtune

2012-01-16T15:34:39Z

Wirbel: add page.

dvbtune is a command line zapping / channel tuning utility for DVB cards, supporting legacy DVB API version 3.2 only.

dvbtune is outdated, but may be still useful in some cases.

==Documentation==
<pre>
usage: dvbtune -f frequency -p h|v -s symbol_rate -v vpid -a apid -t tpid
dvbtune-f frequency

options:
-c [0-3] : Use DVB device [0-3]
-f freq : Absolute Frequency (DVB-S in Hz or DVB-T in Hz), or L-band
Frequency (DVB-S in Hz or DVB-T in Hz).
-p [H|V] : Polarity (DVB-S only)
-t [0|1] : 0 = 22kHz off, 1 = 22kHz on
-I [0|1|2]: 0 = Inversion off 1 = Inversion on, 2 = auto (Default)
-S N : Symbol rate (DVB-S only), e.g. 27500
-D [0-4] : DiSEqc command (0 = none)
-V vpid : Set video PID (oldstyle FF cards)
-A apid : Set audio PID (oldstyle FF cards))
-T ttpid : Set teletext PID (oldstyle FF cards)
-pnr N : Tune to Program Number (aka service) N
-i : Dump SI information as XML
-x : Attempt to auto-find other transponders (experimental)
-m : Monitor the reception quality
-n dpid : Add network interface and receive MPE on PID dpid
--help : help message
--version : version string
</pre>

==Download==
[http://http://sourceforge.net/projects/dvbtools/ http://sourceforge.net/projects/dvbtools]

Testing your DVB device

2012-01-16T15:21:36Z

Wirbel: fix link to szap-s2

This page provides a few suggestions on how to test that a properly installed DVB device '''1''' is functioning correctly. The command line steps described are also indispensable for quick setup and no frills viewing with DVB hardware under Linux.

{{Note|'''1''' In other words, this article assumes that you have already both:
:* physically installed the device into, or attached it to, your system (refer to the manufacturer's instructions for such details) and
:* installed the drivers for your hardware and have the proper modules loaded (see "[[How to Obtain, Build and Install V4L-DVB Device Drivers]]" for such details) 
:Having completed such tasks, you should at least now have a ''/dev/dvb/adapter0/'' directory. (If you have additional DVB devices installed in your system, they will be assigned an increased ''adapter'' number accordingly).}} 

== Comparison of DTV testing applications ==

The following table lists the main features of the different command line DTV testing utilities. For specific information on usage, have a look at its specific wiki article.
 

{| border=1 cellpadding=10 cellspacing=0 valign="top"
|- bgcolor=#efefef valign="top"
|'''feature \ utility'''
|'''dvb-apps [[zap]]'''
|'''[[Szap-s2]]'''
|'''[[dvbtune]]''' and '''[[dvbstream]]''' from dvbtools
|'''[[dvbsnoop]]'''
|-
|'''download'''
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://mercurial.intuxication.org/hg/szap-s2 http://mercurial.intuxication.org/hg/szap-s2]
|[http://sourceforge.net/projects/dvbtools http://sourceforge.net/projects/dvbtools]
|[http://dvbsnoop.sourceforge.net http://dvbsnoop.sourceforge.net]
|-
|'''supported delivery systems'''
|DVB-S, DVB-C, DVB-T, ATSC
|DVB-S, DVB-S2
|DVB-S, DVB-C, DVB-T
|DVB-S, DVB-C, DVB-T
|-
|'''comments'''
|useful for debugging, but inappropriate for newer delivery systems.
|satellite only.
|outdated.
|outdated, but still the most powerful tool for reading and parsing DVB tables. Hint: use another tool to tune and dvbsnoop in parallel to read data. Unfortunally, dvbsnoop misses support for newer descriptors.
|-
|'''supported features'''
|
* channel scan for legacy systems
* tuning
* streaming
* show signal strength/lock
|
* tuning
|
* tuning (dvbtune)
* streaming (dvbstream)
|
* analyse DVB tables and MPEG streams
* show signal strength/lock
|}

== Using dvb-apps ==

'''1. Obtain the dvb-apps package''' 
See the [[LinuxTV dvb-apps]] article for details on how to obtain the package. The dvb-apps package contains several useful tools.

'''2. Scan for the channels you can receive''' 
Refer to the [[Scan|(dvb)scan]] article for details of how to perform this step. Once familiar with the content of that article, you will recognize that this step can be summarized (in general form) by:
mkdir ~/.''{a,c,s,t}''zap
(dvb)scan /''path_to_the_initial_scan_file'' > ~/.''{a,c,s,t}''zap/channels.conf

Note that you may have both a program <code>scan</code> and <code>dvbscan</code> installed on your system, and only one of them may work.

'''3. Tune a frequency and program''' 
Refer to the [[Zap|zap]] article for details of how to perform this step. Once familiar with the content of that article, you will recognize that this step can be summarized (in general form) by:
$ /usr/bin/''{a,c,s,t}''zap -r -c ~/.''{a,c,s,t}''zap/channels.conf "''channel name''"
where, respective to the type of transmission, [[azap]] is used for [[ATSC]], [[czap]] for [[DVB-C]], [[szap]] for [[DVB-S]] and [[tzap]] for [[DVB-T]].
Make sure you do not overlook the -r option for setting up the /dev/dvb/adapterX/dvr0 interface. Otherwise, you cannot record data from dvr0.

{{Note|If (dvb)scan was unable to correctly resolve the audio or video [[PID]] values for a channel in the previous step, a manual adjustment to the channels.conf file will be necessary to correct any inaccurately written PID(s) information. Such occurrences tend to be rare, but nonetheless, they do happen -- often, one only becomes aware of a problem with the PID values after unsuccessful attempts to tune a particular channel. The correct values may be determined using using [[dvbtraffic]] (see step '''4.c)''' below). Another method for finding correct PID values for a channel is also outlined in the section entitled "[[Scan#A_word_about_dvbscan_and_audio_streams|A word about dvbscan and audio streams]]".}}

'''4. After you've tuned a frequency and program''' 

'''a)''' You could now start up your simple TV watching application and decode the stream you have tuned.

For example, while keeping ''{a,c,s,t}''zap running in the first console shell, open up another console and run
mplayer /dev/dvb/adapter0/dvr0 <options>
If you have more than one dvb device installed in your system, then you will have to pass the correct ''adaptor'' number. See the mplayer man page (i.e. in a console run "man mplayer") for a lengthy list of options.

'''b)''' Or, you could now start up a datastreamer

'''c)''' Or, alternatively, you may want to see some statistics of what's coming in for each channel and PID.
Example:
$ /usr/bin/dvbtraffic

dvbtraffic which will access the [[Device nodes and character devices#DVB character devices|/dev/dvb/adapter0/dvr0 logical device]].
An example of output from dvbtraffic is:

0000 24 p/s 4 kb/s 37 kbit
0010 20 p/s 3 kb/s 31 kbit
0011 20 p/s 3 kb/s 31 kbit
0012 70 p/s 12 kb/s 106 kbit
0015 1 p/s 0 kb/s 2 kbit
0080 26 p/s 4 kb/s 40 kbit
0082 26 p/s 4 kb/s 40 kbit
0087 25 p/s 4 kb/s 38 kbit
0100 25 p/s 4 kb/s 38 kbit
0101 25 p/s 4 kb/s 38 kbit
0102 24 p/s 4 kb/s 37 kbit
0200 8567 p/s 1572 kb/s 12885 kbit <--- 
0201 4708 p/s 864 kb/s 7081 kbit
0205 926 p/s 170 kb/s 1392 kbit
0240 49 p/s 8 kb/s 75 kbit
0241 49 p/s 8 kb/s 75 kbit
028b 261 p/s 47 kb/s 393 kbit <--- 
0294 174 p/s 31 kb/s 262 kbit
0295 130 p/s 23 kb/s 196 kbit
02bc 75 p/s 13 kb/s 113 kbit
1fff 87 p/s 15 kb/s 131 kbit
2000 15329 p/s 2814 kb/s 23055 kbit
-PID--FREQ-----BANDWIDTH-BANDWIDTH-

In this case, for the frequency that has been tuned, PID 0x0200 is for the video stream of an HDTV channel and PID 0x028b is for the associated audio stream (both of these have been highlighted in red in the above output for easier visual identification). These PID values presented by dvbtraffuc are in hexadecimal form and need to be converted to their decimal representation (respectively, 512 and 651) for use in a channel.conf file. 

This is the line you would create in the file "channel.conf" given the PID values from the dvbtraffic output shown above:

Nine High Def Gold Coast:746625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:651:1138

And finally
dvbdate

== Using dvbsnoop ==
If the testing steps in the dvb-apps section above work fine, you can jump over this section here. On the other hand, [[dvbsnoop]] is a small, down-to-earth utility that is very handy for debugging and also seeing what is occuring with a dvb device (i.e. tuning works? data coming in? signal strong enough?).

'''1. Obtain the dvbsnoop package''' 
See the [[dvbsnoop]] article for details on how to obtain the package.

'''2. Testing with dvbsnoop''' 
Try things like
dvbsnoop -help
dvbsnoop -s pidscan
This will give out a lot of numbers, but if you understand the system of [[DVB]] you should see if they make sense. Go for one of the PIDs (choose a right one which is a bit difficult as you don't know what they stand for unless you used the scan line above) and try:
dvbsnoop -s bandwidth <PID>
dvbsnoop <PID>
The latter will spit out a lot of hexdumps - at least you receive '''something''' ;-)

== Save a TV program to your hard drive ==
The handy thing about digital TV is, it comes in as a digital stream that you can save right away to your harddisk without any changes necessary to it. Therefore, hardly any CPU resources are needed -- just a lot of HD space (few GB per hour as the stream is MPEG-2 which is not as compressed as, for example, DivX/MPEG-4; it's even more as mostly one [[transport stream]] contains multiple [[PID]]s). There are several ways to do this. For example:

'''a) Using the combination of {a,c,s,t}zap and cat'ing the logical dvr device to save a program stream to disk''' 
If you have a channel tuned with {a,c,s,t}zap (and note that you MUST also be using the -r parameter to set up the logical dvr device in order for the following to work; see [[Zap]] for detail), open up another shell console and run (as root user):
cat /dev/dvb/adapter0/dvr0 > <filename>
The result is that particular program stream will be written to disk, and you should be able to play it back at any later time with your favourite media player.

'''b) Using the combination of {a,c,s,t}zap and test_dvr to save an entire transport stream to disk'''

'''c) Saving to disk with dvbstream''' 
[[dvbstream]] is a useful program that, amongst other things, can save a DVB stream to disk.
'''Method 1''': First tune into a channel, as described above in the zapping step, and then next have dvbstream save a particular stream to file. For example:
tzap 'BBC ONE'
dvbstream 600 601 -o > bbc1.mpeg
The values "600 and 601" are, respectively, the video and audio [[PID]]s for the channel BBC ONE, as derived from the channels.conf file. So this is why it's important that you have your personal channels.conf file with all the PIDs so you can look them up.

'''Method 2''': Alternatively, instead of using a combination of *zap and dvbstream, you can use dvbstream alone provided you pass which frequency to tune and list the correct PIDs. For example:
dvbstream -f 578000 600 601 -o >bbc1.mpeg

Wait a few seconds and then press Ctrl+C to stop. You should then be able to open/playback the recorded file with any of your favourite media players (like Mplayer, (g)xine, noatune, etc. etc ) provided you have the correct decoders installed on your system (which, in general regards to DVB transmissions, are usually going to be MPEG-2, but can now also be MPEG-4).

If the file is rather small, e.g. smaller than 1 MB after a minute of recording, then you can't receive this TV channel - maybe the reception is bad (too weak antenna signal) - or maybe your card's frequency is not tuned for the right sender? Watch out, some PIDs come up a few times (but for different frequencies).

This might not be what you wanna do every day (unless you only watch BBC1 or you can easily memorise all your channels with their two PIDs) - but it's very fast and easy to do these steps for testing purposes.

==Next steps - More feature rich viewing software ==
It is not the intention of this page to provide a detailed description of the use of DVB hardware with more complex Linux viewing software applications. Suffice it to say that you will have some choice. For example:
* for light TV watching with a DVB device under Linux, [[MPlayer]], [[Xine]], [[Kaffeine]], [[Klear]] and a few others are often selected.
* alternatively, for "Media Center" type applications, the usual first suspects are [[Freevo]], [[MythTV]], and [[VDR]], but there are others as well
* you could use the streaming facilities of [[dvbstream]] and then watch the MPEG-2 stream (even possible on a different computer) with programs like Xine, MPlayer etc.

For some further inspiration on what's possible with more advanced software usage see:
* the [[TV Related Software]] page, a commented software list, and
* [[Example setups]]

---------

(note: you'll need to install the [[VDR Software Decoder Plugin]] if you want to use VDR for watching with a software decoding card).

* Digital Video Broadcasting – A practical guide by Hugo Mills [http://www.carfax.org.uk/docs/DVB/]
[[Category:Drivers]]
[[Category:Software]]

Testing your DVB device

2012-01-15T16:33:51Z

Wirbel: add comparison

This page provides a few suggestions on how to test that a properly installed DVB device '''1''' is functioning correctly. The command line steps described are also indispensable for quick setup and no frills viewing with DVB hardware under Linux.

{{Note|'''1''' In other words, this article assumes that you have already both:
:* physically installed the device into, or attached it to, your system (refer to the manufacturer's instructions for such details) and
:* installed the drivers for your hardware and have the proper modules loaded (see "[[How to Obtain, Build and Install V4L-DVB Device Drivers]]" for such details) 
:Having completed such tasks, you should at least now have a ''/dev/dvb/adapter0/'' directory. (If you have additional DVB devices installed in your system, they will be assigned an increased ''adapter'' number accordingly).}} 

== Comparison of DTV testing applications ==

The following table lists the main features of the different command line DTV testing utilities. For specific information on usage, have a look at its specific wiki article.
 

{| border=1 cellpadding=10 cellspacing=0 valign="top"
|- bgcolor=#efefef valign="top"
|'''feature \ utility'''
|'''dvb-apps [[zap]]'''
|'''[[szap-S2]]'''
|'''[[dvbtune]]''' and '''[[dvbstream]]''' from dvbtools
|'''[[dvbsnoop]]'''
|-
|'''download'''
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://mercurial.intuxication.org/hg/szap-s2 http://mercurial.intuxication.org/hg/szap-s2]
|[http://sourceforge.net/projects/dvbtools http://sourceforge.net/projects/dvbtools]
|[http://dvbsnoop.sourceforge.net http://dvbsnoop.sourceforge.net]
|-
|'''supported delivery systems'''
|DVB-S, DVB-C, DVB-T, ATSC
|DVB-S, DVB-S2
|DVB-S, DVB-C, DVB-T
|DVB-S, DVB-C, DVB-T
|-
|'''comments'''
|useful for debugging, but inappropriate for newer delivery systems.
|satellite only.
|outdated.
|outdated, but still the most powerful tool for reading and parsing DVB tables. Hint: use another tool to tune and dvbsnoop in parallel to read data. Unfortunally, dvbsnoop misses support for newer descriptors.
|-
|'''supported features'''
|
* channel scan for legacy systems
* tuning
* streaming
* show signal strength/lock
|
* tuning
|
* tuning (dvbtune)
* streaming (dvbstream)
|
* analyse DVB tables and MPEG streams
* show signal strength/lock
|}

== Using dvb-apps ==

'''1. Obtain the dvb-apps package''' 
See the [[LinuxTV dvb-apps]] article for details on how to obtain the package. The dvb-apps package contains several useful tools.

'''2. Scan for the channels you can receive''' 
Refer to the [[Scan|(dvb)scan]] article for details of how to perform this step. Once familiar with the content of that article, you will recognize that this step can be summarized (in general form) by:
mkdir ~/.''{a,c,s,t}''zap
(dvb)scan /''path_to_the_initial_scan_file'' > ~/.''{a,c,s,t}''zap/channels.conf

Note that you may have both a program <code>scan</code> and <code>dvbscan</code> installed on your system, and only one of them may work.

'''3. Tune a frequency and program''' 
Refer to the [[Zap|zap]] article for details of how to perform this step. Once familiar with the content of that article, you will recognize that this step can be summarized (in general form) by:
$ /usr/bin/''{a,c,s,t}''zap -r -c ~/.''{a,c,s,t}''zap/channels.conf "''channel name''"
where, respective to the type of transmission, [[azap]] is used for [[ATSC]], [[czap]] for [[DVB-C]], [[szap]] for [[DVB-S]] and [[tzap]] for [[DVB-T]].
Make sure you do not overlook the -r option for setting up the /dev/dvb/adapterX/dvr0 interface. Otherwise, you cannot record data from dvr0.

{{Note|If (dvb)scan was unable to correctly resolve the audio or video [[PID]] values for a channel in the previous step, a manual adjustment to the channels.conf file will be necessary to correct any inaccurately written PID(s) information. Such occurrences tend to be rare, but nonetheless, they do happen -- often, one only becomes aware of a problem with the PID values after unsuccessful attempts to tune a particular channel. The correct values may be determined using using [[dvbtraffic]] (see step '''4.c)''' below). Another method for finding correct PID values for a channel is also outlined in the section entitled "[[Scan#A_word_about_dvbscan_and_audio_streams|A word about dvbscan and audio streams]]".}}

'''4. After you've tuned a frequency and program''' 

'''a)''' You could now start up your simple TV watching application and decode the stream you have tuned.

For example, while keeping ''{a,c,s,t}''zap running in the first console shell, open up another console and run
mplayer /dev/dvb/adapter0/dvr0 <options>
If you have more than one dvb device installed in your system, then you will have to pass the correct ''adaptor'' number. See the mplayer man page (i.e. in a console run "man mplayer") for a lengthy list of options.

'''b)''' Or, you could now start up a datastreamer

'''c)''' Or, alternatively, you may want to see some statistics of what's coming in for each channel and PID.
Example:
$ /usr/bin/dvbtraffic

dvbtraffic which will access the [[Device nodes and character devices#DVB character devices|/dev/dvb/adapter0/dvr0 logical device]].
An example of output from dvbtraffic is:

0000 24 p/s 4 kb/s 37 kbit
0010 20 p/s 3 kb/s 31 kbit
0011 20 p/s 3 kb/s 31 kbit
0012 70 p/s 12 kb/s 106 kbit
0015 1 p/s 0 kb/s 2 kbit
0080 26 p/s 4 kb/s 40 kbit
0082 26 p/s 4 kb/s 40 kbit
0087 25 p/s 4 kb/s 38 kbit
0100 25 p/s 4 kb/s 38 kbit
0101 25 p/s 4 kb/s 38 kbit
0102 24 p/s 4 kb/s 37 kbit
0200 8567 p/s 1572 kb/s 12885 kbit <--- 
0201 4708 p/s 864 kb/s 7081 kbit
0205 926 p/s 170 kb/s 1392 kbit
0240 49 p/s 8 kb/s 75 kbit
0241 49 p/s 8 kb/s 75 kbit
028b 261 p/s 47 kb/s 393 kbit <--- 
0294 174 p/s 31 kb/s 262 kbit
0295 130 p/s 23 kb/s 196 kbit
02bc 75 p/s 13 kb/s 113 kbit
1fff 87 p/s 15 kb/s 131 kbit
2000 15329 p/s 2814 kb/s 23055 kbit
-PID--FREQ-----BANDWIDTH-BANDWIDTH-

In this case, for the frequency that has been tuned, PID 0x0200 is for the video stream of an HDTV channel and PID 0x028b is for the associated audio stream (both of these have been highlighted in red in the above output for easier visual identification). These PID values presented by dvbtraffuc are in hexadecimal form and need to be converted to their decimal representation (respectively, 512 and 651) for use in a channel.conf file. 

This is the line you would create in the file "channel.conf" given the PID values from the dvbtraffic output shown above:

Nine High Def Gold Coast:746625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:651:1138

And finally
dvbdate

== Using dvbsnoop ==
If the testing steps in the dvb-apps section above work fine, you can jump over this section here. On the other hand, [[dvbsnoop]] is a small, down-to-earth utility that is very handy for debugging and also seeing what is occuring with a dvb device (i.e. tuning works? data coming in? signal strong enough?).

'''1. Obtain the dvbsnoop package''' 
See the [[dvbsnoop]] article for details on how to obtain the package.

'''2. Testing with dvbsnoop''' 
Try things like
dvbsnoop -help
dvbsnoop -s pidscan
This will give out a lot of numbers, but if you understand the system of [[DVB]] you should see if they make sense. Go for one of the PIDs (choose a right one which is a bit difficult as you don't know what they stand for unless you used the scan line above) and try:
dvbsnoop -s bandwidth <PID>
dvbsnoop <PID>
The latter will spit out a lot of hexdumps - at least you receive '''something''' ;-)

== Save a TV program to your hard drive ==
The handy thing about digital TV is, it comes in as a digital stream that you can save right away to your harddisk without any changes necessary to it. Therefore, hardly any CPU resources are needed -- just a lot of HD space (few GB per hour as the stream is MPEG-2 which is not as compressed as, for example, DivX/MPEG-4; it's even more as mostly one [[transport stream]] contains multiple [[PID]]s). There are several ways to do this. For example:

'''a) Using the combination of {a,c,s,t}zap and cat'ing the logical dvr device to save a program stream to disk''' 
If you have a channel tuned with {a,c,s,t}zap (and note that you MUST also be using the -r parameter to set up the logical dvr device in order for the following to work; see [[Zap]] for detail), open up another shell console and run (as root user):
cat /dev/dvb/adapter0/dvr0 > <filename>
The result is that particular program stream will be written to disk, and you should be able to play it back at any later time with your favourite media player.

'''b) Using the combination of {a,c,s,t}zap and test_dvr to save an entire transport stream to disk'''

'''c) Saving to disk with dvbstream''' 
[[dvbstream]] is a useful program that, amongst other things, can save a DVB stream to disk.
'''Method 1''': First tune into a channel, as described above in the zapping step, and then next have dvbstream save a particular stream to file. For example:
tzap 'BBC ONE'
dvbstream 600 601 -o > bbc1.mpeg
The values "600 and 601" are, respectively, the video and audio [[PID]]s for the channel BBC ONE, as derived from the channels.conf file. So this is why it's important that you have your personal channels.conf file with all the PIDs so you can look them up.

'''Method 2''': Alternatively, instead of using a combination of *zap and dvbstream, you can use dvbstream alone provided you pass which frequency to tune and list the correct PIDs. For example:
dvbstream -f 578000 600 601 -o >bbc1.mpeg

Wait a few seconds and then press Ctrl+C to stop. You should then be able to open/playback the recorded file with any of your favourite media players (like Mplayer, (g)xine, noatune, etc. etc ) provided you have the correct decoders installed on your system (which, in general regards to DVB transmissions, are usually going to be MPEG-2, but can now also be MPEG-4).

If the file is rather small, e.g. smaller than 1 MB after a minute of recording, then you can't receive this TV channel - maybe the reception is bad (too weak antenna signal) - or maybe your card's frequency is not tuned for the right sender? Watch out, some PIDs come up a few times (but for different frequencies).

This might not be what you wanna do every day (unless you only watch BBC1 or you can easily memorise all your channels with their two PIDs) - but it's very fast and easy to do these steps for testing purposes.

==Next steps - More feature rich viewing software ==
It is not the intention of this page to provide a detailed description of the use of DVB hardware with more complex Linux viewing software applications. Suffice it to say that you will have some choice. For example:
* for light TV watching with a DVB device under Linux, [[MPlayer]], [[Xine]], [[Kaffeine]], [[Klear]] and a few others are often selected.
* alternatively, for "Media Center" type applications, the usual first suspects are [[Freevo]], [[MythTV]], and [[VDR]], but there are others as well
* you could use the streaming facilities of [[dvbstream]] and then watch the MPEG-2 stream (even possible on a different computer) with programs like Xine, MPlayer etc.

For some further inspiration on what's possible with more advanced software usage see:
* the [[TV Related Software]] page, a commented software list, and
* [[Example setups]]

---------

(note: you'll need to install the [[VDR Software Decoder Plugin]] if you want to use VDR for watching with a software decoding card).

* Digital Video Broadcasting – A practical guide by Hugo Mills [http://www.carfax.org.uk/docs/DVB/]
[[Category:Drivers]]
[[Category:Software]]

Dvbv5-scan

2012-01-15T12:42:33Z

Wirbel:

dvbv5-scan is the newest tool for scanning channels. It use a new channel/service file format, which is yet unknown to other applications:

example channel list:
<pre>
[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 113000000
SYMBOL_RATE = 6900000
INNER_FEC = NONE
MODULATION = QAM/64
INVERSION = AUTO

[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 121000000
SYMBOL_RATE = 6900000
INNER_FEC = NONE
MODULATION = QAM/64
INVERSION = AUTO

[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 130000000
SYMBOL_RATE = 6900000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO

[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 330000000
SYMBOL_RATE = 6900000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO

[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 338000000
SYMBOL_RATE = 6900000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO

[CHANNEL]
DELIVERY_SYSTEM = DVBC/ANNEX_A
FREQUENCY = 346000000
SYMBOL_RATE = 6900000
INNER_FEC = NONE
MODULATION = QAM/256
INVERSION = AUTO
</pre>

example service list:
<pre>
[Das Erste]
SERVICE_ID = 28106
VIDEO_PID = 101
AUDIO_PID = 102 103 106
PID_0b = 2171
PID_06 = 105 104 84
PID_05 = 2070
FREQUENCY = 113000000
MODULATION = QAM/64
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[Bayerisches FS Süd]
SERVICE_ID = 28107
VIDEO_PID = 201
AUDIO_PID = 202 203 206
PID_0b = 2171
PID_06 = 204
PID_05 = 2178
FREQUENCY = 113000000
MODULATION = QAM/64
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[hr-fernsehen]
SERVICE_ID = 28108
VIDEO_PID = 301
AUDIO_PID = 302 303
PID_0b = 2171
PID_06 = 304
PID_05 = 2270
FREQUENCY = 113000000
MODULATION = QAM/64
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[Bayerisches FS Nord]
SERVICE_ID = 28110
VIDEO_PID = 201
AUDIO_PID = 202 203 206
PID_0b = 2171
PID_06 = 204
PID_05 = 2178
FREQUENCY = 113000000
MODULATION = QAM/64
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[WDR Köln]
SERVICE_ID = 28111
VIDEO_PID = 601
AUDIO_PID = 602 603
PID_0b = 2171
PID_06 = 604
PID_05 = 2370
FREQUENCY = 113000000
MODULATION = QAM/64
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[Planet HD]
SERVICE_ID = 50003
VIDEO_PID = 6821
AUDIO_PID = 6822
FREQUENCY = 130000000
MODULATION = QAM/256
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[13th Street HD]
SERVICE_ID = 50004
VIDEO_PID = 6831
AUDIO_PID = 6832 6833
FREQUENCY = 130000000
MODULATION = QAM/256
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A

[ProSieben HD]
SERVICE_ID = 50015
VIDEO_PID = 6841
AUDIO_PID = 6842
PID_06 = 6844
FREQUENCY = 130000000
MODULATION = QAM/256
INVERSION = OFF
SYMBOL_RATE = 6900000
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A
</pre>

Frequency scan

2012-01-15T12:41:45Z

Wirbel: remove statement DVB-T2 support. Only partially yet.

In order to be able receive a particular signal with your TV tuner device you will need to tune/set it to the correct radio [[frequency]] used by that source transmission. Therefore, you (or, at least, the viewing application you are using) will first want to know which frequencies are used for transmission and thereby are tunable for your receiver at your location of residence. Frequency scanning utilities, listed below, perform such signal detection and, generally, provide a list of the frequencies upon which content is discovered, with which higher level applications can then in turn use for tuning purposes.

Note: Historically, the set of frequencies used under the older [[Analog TV|analogue systems]] have differed from one another, meaning that the particular frequencies used across North America, Europe, Asia, etc., etc., will differ depending upon the transmission standard adopted within each nation. When countries began to make the transition to [[Digital Video Broadcasting|digital TV systems]], most have opted to continue to use their old channel frequency schemes so as to make the switch from analog to digital systems as seamless as possible for the end user.

==Frequency Scanning Utilities==
===Analog===
* scantv (part of [[xawtv|xawtv package]], both branches)
* apps with built in scanning ... [[tvtime]], [[xawtv|xawtv/motv]] (which call upon scantv), [[kdetv]] ...

===Digital===
One of the handiest tools for scanning frequencies is "[[Scan|(dvb)scan]]", a utility included within the [[LinuxTV dvb-apps]] package. (dvb)scan parses the information from a pre-configured initial scan file that is specific to a particular country/region/location/service_provider (many of which are contained within the dvb-apps package as well as being available within the wiki or elsewhere), then tunes into the frequencies and lists the names for all available PIDs.

* [[alexplore]] (part of the [[xawtv#Associated_Utilities_2|v4 xawtv package]])
* [[dvbscan|dvbscan/scandvb/atscscan]]
* [[scan]]
* [[w_scan]]
* [[scan-s2]] [http://mercurial.intuxication.org/hg/scan-s2/]
* [[dvbv5-scan]]
* apps with built in scanning ... [[kaffeine]], [[MythTV]], [[Me TV]]

====Comparison of DVB frequency scanning commandline utilities====

{{Note|The differences between '''scan''' and '''dvbscan''' should be added to this wiki article. The information for dvbscan is still to be completed - please help.}}

The following table lists the main features of the different command line scanners. For specific information on usage, have a look at its specific wiki article.
 

{| border=1 cellpadding=10 cellspacing=0 valign="top"
|- bgcolor=#efefef valign="top"
|'''feature \ scanner'''
|'''[[scan]]'''
|'''[[dvbscan]]'''
|'''[[w_scan]]'''
|'''[[scan-s2]]'''
|'''[[dvbv5-scan]]'''
|-
|'''download'''
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://wirbel.htpc-forum.de/w_scan/index.html wirbel.htpc-forum.de/w_scan/index.html]
|[http://mercurial.intuxication.org/hg/scan-s2 mercurial.intuxication.org/hg/scan-s2]
|git://linuxtv.org/v4l-utils.git
|-
|'''last stable'''
|linuxtv-dvb-apps-1.1.1 (outdated, May 2006), look dvbv5-scan
|outdated, look dvbv5-scan
|none / use latest version
|outdated, look dvbv5-scan
|none / use latest version
|-
|'''comments'''
|linuxtv.org maintained '''DVB-S2 support missing''' needs dvb driver with API-3.2 or 5.x
|linuxtv.org maintained
|compiling needs dvb driver with API-5.0 or higher usage needs API-3.2 or API-5.x
|needs dvb driver with 5.0 or higher last update 02/2009
|needs dvb driver with 5.5 or higher in development (01/2012) file format (up to now) incompatible to other apps
|-
|'''supported DTV types'''
|DVB-S, DVB-C(Europe), DVB-T, ATSC (VSB and QAM), DMB-TH (China)
| ?
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T/T2, ATSC (VSB and QAM), DMB-TH (China)
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T, ATSC (VSB and QAM)
|ISDB-T, DVB-C, DVB-T, DVB-S, DVB-S2 and more
|-
|'''initial scan file required''' (matching to your satellite or local aerial/cable network)
|yes (use dvb-apps hg from linuxtv.org)
|yes (use dvb-apps hg from linuxtv.org)
|'''not required'''
|yes (use dvb-apps hg from linuxtv.org) ''NOTE: slightly different file format from scan because of additional DVB-S2 support.''
|yes (new file format)
|-
|'''can generate initial scan file'''
|no
|no
|'''yes'''
|no
|no
|-
|'''can generate channels.conf for zap/xine/mplayer/vlc'''
|yes (default)
|?
|yes
|yes
|no (new file format)
|-
|'''can generate channels.conf for [http://www.tvdr.de/ VDR]'''
|yes, but hopeless outdated (vdr-1.3 only)
|?
|yes (default)
|yes (default)
|no (new file format)
|-
|'''can generate channels.dvb for kaffeine'''
|no
|?
|yes
|no
|no (new file format)
|}

==External Links==
'''Analog'''
*
'''Digital'''
For some other general sources (which may or may not be that useful) for finding local channel frequency lists, see:
* http://www.vdr-wiki.de/wiki/index.php/Kanal_DVB-T - DVB-T channels in Europe
* http://www.wohnort.demon.co.uk/DAB/
* http://www.digitalspy.co.uk/terrestrial/tuning/
[[Category:Software]]

Frequency scan

2012-01-15T12:22:30Z

Wirbel: remove '!!'

In order to be able receive a particular signal with your TV tuner device you will need to tune/set it to the correct radio [[frequency]] used by that source transmission. Therefore, you (or, at least, the viewing application you are using) will first want to know which frequencies are used for transmission and thereby are tunable for your receiver at your location of residence. Frequency scanning utilities, listed below, perform such signal detection and, generally, provide a list of the frequencies upon which content is discovered, with which higher level applications can then in turn use for tuning purposes.

Note: Historically, the set of frequencies used under the older [[Analog TV|analogue systems]] have differed from one another, meaning that the particular frequencies used across North America, Europe, Asia, etc., etc., will differ depending upon the transmission standard adopted within each nation. When countries began to make the transition to [[Digital Video Broadcasting|digital TV systems]], most have opted to continue to use their old channel frequency schemes so as to make the switch from analog to digital systems as seamless as possible for the end user.

==Frequency Scanning Utilities==
===Analog===
* scantv (part of [[xawtv|xawtv package]], both branches)
* apps with built in scanning ... [[tvtime]], [[xawtv|xawtv/motv]] (which call upon scantv), [[kdetv]] ...

===Digital===
One of the handiest tools for scanning frequencies is "[[Scan|(dvb)scan]]", a utility included within the [[LinuxTV dvb-apps]] package. (dvb)scan parses the information from a pre-configured initial scan file that is specific to a particular country/region/location/service_provider (many of which are contained within the dvb-apps package as well as being available within the wiki or elsewhere), then tunes into the frequencies and lists the names for all available PIDs.

* [[alexplore]] (part of the [[xawtv#Associated_Utilities_2|v4 xawtv package]])
* [[dvbscan|dvbscan/scandvb/atscscan]]
* [[scan]]
* [[w_scan]]
* [[scan-s2]] [http://mercurial.intuxication.org/hg/scan-s2/]
* [[dvbv5-scan]]
* apps with built in scanning ... [[kaffeine]], [[MythTV]], [[Me TV]]

====Comparison of DVB frequency scanning commandline utilities====

{{Note|The differences between '''scan''' and '''dvbscan''' should be added to this wiki article. The information for dvbscan is still to be completed - please help.}}

The following table lists the main features of the different command line scanners. For specific information on usage, have a look at its specific wiki article.
 

{| border=1 cellpadding=10 cellspacing=0 valign="top"
|- bgcolor=#efefef valign="top"
|'''feature \ scanner'''
|'''[[scan]]'''
|'''[[dvbscan]]'''
|'''[[w_scan]]'''
|'''[[scan-s2]]'''
|'''[[dvbv5-scan]]'''
|-
|'''download'''
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://wirbel.htpc-forum.de/w_scan/index.html wirbel.htpc-forum.de/w_scan/index.html]
|[http://mercurial.intuxication.org/hg/scan-s2 mercurial.intuxication.org/hg/scan-s2]
|git://linuxtv.org/v4l-utils.git
|-
|'''last stable'''
|linuxtv-dvb-apps-1.1.1 (outdated, May 2006), look dvbv5-scan
|outdated, look dvbv5-scan
|none / use latest version
|outdated, look dvbv5-scan
|none / use latest version
|-
|'''comments'''
|linuxtv.org maintained '''DVB-S2 support missing''' needs dvb driver with API-3.2 or 5.x
|linuxtv.org maintained
|compiling needs dvb driver with API-5.0 or higher usage needs API-3.2 or API-5.x
|needs dvb driver with 5.0 or higher last update 02/2009
|needs dvb driver with 5.5 or higher in development (01/2012) file format (up to now) incompatible to other apps
|-
|'''supported DTV types'''
|DVB-S, DVB-C(Europe), DVB-T, ATSC (VSB and QAM), DMB-TH (China)
| ?
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T/T2, ATSC (VSB and QAM), DMB-TH (China)
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T, ATSC (VSB and QAM)
|ISDB-T, DVB-C, DVB-T, DVBT2, DVB-S, DVB-S2 and more
|-
|'''initial scan file required''' (matching to your satellite or local aerial/cable network)
|yes (use dvb-apps hg from linuxtv.org)
|yes (use dvb-apps hg from linuxtv.org)
|'''not required'''
|yes (use dvb-apps hg from linuxtv.org) ''NOTE: slightly different file format from scan because of additional DVB-S2 support.''
|yes (new file format)
|-
|'''can generate initial scan file'''
|no
|no
|'''yes'''
|no
|no
|-
|'''can generate channels.conf for zap/xine/mplayer/vlc'''
|yes (default)
|?
|yes
|yes
|no (new file format)
|-
|'''can generate channels.conf for [http://www.tvdr.de/ VDR]'''
|yes, but hopeless outdated (vdr-1.3 only)
|?
|yes (default)
|yes (default)
|no (new file format)
|-
|'''can generate channels.dvb for kaffeine'''
|no
|?
|yes
|no
|no (new file format)
|}

==External Links==
'''Analog'''
*
'''Digital'''
For some other general sources (which may or may not be that useful) for finding local channel frequency lists, see:
* http://www.vdr-wiki.de/wiki/index.php/Kanal_DVB-T - DVB-T channels in Europe
* http://www.wohnort.demon.co.uk/DAB/
* http://www.digitalspy.co.uk/terrestrial/tuning/
[[Category:Software]]

W scan

2012-01-11T18:09:24Z

Wirbel: /* Examples */

{{lowercase|w_scan}}

''w_scan'' is a small command line utility used to perform [[Frequency scan|frequency scan]]s for [[DVB]] and [[ATSC]] transmissions. It is not included in [[LinuxTV dvb-apps]], but complements the two [[Frequency scan|frequency scanning]] utilities available through [[LinuxTV dvb-apps]], [[Dvbscan|dvbscan]] and [[Scan|scan]].

''w_scan'' is capable of directly creating channels.conf files as well as initial tuning data for [[Scan|scan]].

==Obtaining w_scan==
''w_scan'' can be obtained [http://wirbel.htpc-forum.de/w_scan/index2.html here].

==Documentation==
Detailed information can be found in the ''w_scan'' man page (i.e. from a console, run <code>man w_scan</code>). Additionally, running ''w_scan'' with the -h parameter will produce an output that provides a summary of it's main command line options.
<pre>w_scan [options...] >> channels.conf</pre>

In general, when using ''w_scan'' you should at least specify three parameters: frontend type, country/satellite and output format. The following table summarizes the basic command line essentials for using ''w_scan''.

{| class="wikitable"
|+'''Basic w_scan commandline parameters and their respective options'''
|-
! Parameter !! Argument !! Description & Options

|-
| '''Frontend Type'''
| -f''Type''
|
a = ATSC (North America, cable and terrestrial) 
c = DVB-C (Europe, cable) 
s = DVB-S/S2 (Satellite) 
t = DVB-T/T2 (Europe, terrestrial = default) 

NOTE:
* ATSC support requires a w_scan version >= 20080815
* Satellite support requires a w_scan version >= 20090504)

|-
| '''ATSC Type'''
| -A''Type''
|
(ignored for DVB-C and DVB-T) 
1 = VSB ("Over-the-Air)" 
2 = QAM annex B ("cable TV") 
3 = both of them

|-
|'''Country ID'''
| -c''ID''
|
(mandatory for ATSC, DVB-C, DVB-T/T2) 
uppercase two character identifier as defined in ISO 3166-1, 
(DE,FR,GB,US,FI,...) 
see -c? for list of countries.

|-
| '''Satellite ID'''
| -s''ID''
|
(mandatory for DVB-S/S2) 
uppercase character constant with E (east) or W (west) as separator, 
(S19E2,S13E0,S0W8,...) 
see -s? for list of satellites.

|-
| '''Output Format'''
| -''Format''
|
X = czap/tzap/xine channels.conf 
x = "initial tuning data" for [[Scan]] 
G = Gstreamer dvbsrc Plugin 
k = channels.dvb for [[Kaffeine]] 
L = VLC xspf playlist (experimental) 
M = mplayer format, similar to X 
If the output format is not specified, w_scan defaults to create [http://www.tvdr.de/ VDR-1.6 channels.conf].
|-
| '''VDR version'''
| -o''N''
|
6 = vdr-1.6.x 
7 = vdr-1.7.3 or higher
|-
| '''Help Level'''
| -''Level''
|
h = basic help 
H = extended help for expert functionality

|}

Some working examples, cobbled together from the basics given in the above table, are provided below. Note: ''Experts'' or ''experienced users'' may use some of the other ''w_scan'' options available, but this is not recommended. (For example, w_scan searches ''/dev/dvb/adapterX/frontendY'' for DVB/ATSC cards matching to option "-f", therefore specifying the adapter "-a XX" is not recommended.)

==Examples==
{{Note|As mentioned in the above table:
* ATSC support requires a w_scan version <nowiki> >= </nowiki> 20080815
* ATSC support was integrated in vdr-1.7.14, VDR output needs '-o 7'
* DVB-S/S2 support requires a w_scan version <nowiki> >= </nowiki> 20090504
* DVB-T2 support requires a w_scan version <nowiki> >= </nowiki> 20120111 }}

===Scanning ATSC VSB (United States, Over-the-Air)===
$ w_scan -fa -A1 -c US -X
===Scanning ATSC QAM annex B (United States, digital cable TV)===
$ w_scan -fa -A2 -c US -X
===Scanning DVB-T/T2 (Germany, Over-the-Air, VDR output)===
$ w_scan -ft -c DE

===Scanning DVB-C (Germany, digital cable TV, Kaffeine channels.dvb)===
$ w_scan -fc -c DE -k
===Scanning DVB-S/S2 (Astra 19.2east, vdr-1.7.x)===
$ w_scan -fs -s S19E2 -o 7
===Scanning DVB-S (Thor 0.8west, vdr-1.3.x .. vdr-1.6.x)===
$ w_scan -fs -s S0W8
===Scanning DVB-S (Hotbird, vdr-1.7, 4-port DiSeqC switch, hotbird at port 3)===
$ w_scan -o 7 -fs -s S13E0 -D2c
Note: ports are counting from '0'.

===Generating dvbscan tuning data===
Exactly as above, just specify output format dvbscan with "-x":
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -x >''cc-Ttttt''

If you choose to create an initial scan file (and you know the name of your local transmitter or cable provider), you can send the resulting file to the [http://linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dvb mailing list] after checking that it hasn't already been posted or added to the [http://linuxtv.org/hg/dvb-apps/file/tip/util/scan/ scan directory in the dvb-apps repository].

===Generating c/s/tzap tuning data===
Exactly as above, just specify output format zap/czap/xine with "-X" (uppercase X):
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -X >''cc-Ttttt''

===Defining output charset===
$ w_scan -f <FRONTEND_TYPE> -C <CHARSET> ...
Use 'iconv --list' for a list of possible output charsets, usually something like 'utf-8', 'iso8859-15'.
Needs 20110410 or higher.

==Also See==
* [[Frequency_scan#Comparison_of_DVB_frequency_scanning_commandline_utilities|Comparison of the scanning utilities]].
* man w_scan
* [[scan]]
* [[dvbscan]]

==External Links==
* [http://wirbel.htpc-forum.de/w_scan/index2.html Homepage (de)]
* [http://wirbel.htpc-forum.de/w_scan/index_en.html Homepage (en)]
* [http://edafe.org/vdr/w_scan/ English howto by edafe]

[[Category:Apps & Utilities]]

W scan

2012-01-11T18:08:48Z

Wirbel:

{{lowercase|w_scan}}

''w_scan'' is a small command line utility used to perform [[Frequency scan|frequency scan]]s for [[DVB]] and [[ATSC]] transmissions. It is not included in [[LinuxTV dvb-apps]], but complements the two [[Frequency scan|frequency scanning]] utilities available through [[LinuxTV dvb-apps]], [[Dvbscan|dvbscan]] and [[Scan|scan]].

''w_scan'' is capable of directly creating channels.conf files as well as initial tuning data for [[Scan|scan]].

==Obtaining w_scan==
''w_scan'' can be obtained [http://wirbel.htpc-forum.de/w_scan/index2.html here].

==Documentation==
Detailed information can be found in the ''w_scan'' man page (i.e. from a console, run <code>man w_scan</code>). Additionally, running ''w_scan'' with the -h parameter will produce an output that provides a summary of it's main command line options.
<pre>w_scan [options...] >> channels.conf</pre>

In general, when using ''w_scan'' you should at least specify three parameters: frontend type, country/satellite and output format. The following table summarizes the basic command line essentials for using ''w_scan''.

{| class="wikitable"
|+'''Basic w_scan commandline parameters and their respective options'''
|-
! Parameter !! Argument !! Description & Options

|-
| '''Frontend Type'''
| -f''Type''
|
a = ATSC (North America, cable and terrestrial) 
c = DVB-C (Europe, cable) 
s = DVB-S/S2 (Satellite) 
t = DVB-T/T2 (Europe, terrestrial = default) 

NOTE:
* ATSC support requires a w_scan version >= 20080815
* Satellite support requires a w_scan version >= 20090504)

|-
| '''ATSC Type'''
| -A''Type''
|
(ignored for DVB-C and DVB-T) 
1 = VSB ("Over-the-Air)" 
2 = QAM annex B ("cable TV") 
3 = both of them

|-
|'''Country ID'''
| -c''ID''
|
(mandatory for ATSC, DVB-C, DVB-T/T2) 
uppercase two character identifier as defined in ISO 3166-1, 
(DE,FR,GB,US,FI,...) 
see -c? for list of countries.

|-
| '''Satellite ID'''
| -s''ID''
|
(mandatory for DVB-S/S2) 
uppercase character constant with E (east) or W (west) as separator, 
(S19E2,S13E0,S0W8,...) 
see -s? for list of satellites.

|-
| '''Output Format'''
| -''Format''
|
X = czap/tzap/xine channels.conf 
x = "initial tuning data" for [[Scan]] 
G = Gstreamer dvbsrc Plugin 
k = channels.dvb for [[Kaffeine]] 
L = VLC xspf playlist (experimental) 
M = mplayer format, similar to X 
If the output format is not specified, w_scan defaults to create [http://www.tvdr.de/ VDR-1.6 channels.conf].
|-
| '''VDR version'''
| -o''N''
|
6 = vdr-1.6.x 
7 = vdr-1.7.3 or higher
|-
| '''Help Level'''
| -''Level''
|
h = basic help 
H = extended help for expert functionality

|}

Some working examples, cobbled together from the basics given in the above table, are provided below. Note: ''Experts'' or ''experienced users'' may use some of the other ''w_scan'' options available, but this is not recommended. (For example, w_scan searches ''/dev/dvb/adapterX/frontendY'' for DVB/ATSC cards matching to option "-f", therefore specifying the adapter "-a XX" is not recommended.)

==Examples==
{{Note|As mentioned in the above table:
* ATSC support requires a w_scan version <nowiki> >= </nowiki> 20080815
* ATSC support was integrated in vdr-1.7.14, VDR output needs '-o 7'
* DVB-S/S2 support requires a w_scan version <nowiki> >= </nowiki> 20090504 }}
* DVB-T2 support requires a w_scan version <nowiki> >= </nowiki> 20120111 }}

===Scanning ATSC VSB (United States, Over-the-Air)===
$ w_scan -fa -A1 -c US -X
===Scanning ATSC QAM annex B (United States, digital cable TV)===
$ w_scan -fa -A2 -c US -X
===Scanning DVB-T/T2 (Germany, Over-the-Air, VDR output)===
$ w_scan -ft -c DE

===Scanning DVB-C (Germany, digital cable TV, Kaffeine channels.dvb)===
$ w_scan -fc -c DE -k
===Scanning DVB-S/S2 (Astra 19.2east, vdr-1.7.x)===
$ w_scan -fs -s S19E2 -o 7
===Scanning DVB-S (Thor 0.8west, vdr-1.3.x .. vdr-1.6.x)===
$ w_scan -fs -s S0W8
===Scanning DVB-S (Hotbird, vdr-1.7, 4-port DiSeqC switch, hotbird at port 3)===
$ w_scan -o 7 -fs -s S13E0 -D2c
Note: ports are counting from '0'.

===Generating dvbscan tuning data===
Exactly as above, just specify output format dvbscan with "-x":
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -x >''cc-Ttttt''

If you choose to create an initial scan file (and you know the name of your local transmitter or cable provider), you can send the resulting file to the [http://linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dvb mailing list] after checking that it hasn't already been posted or added to the [http://linuxtv.org/hg/dvb-apps/file/tip/util/scan/ scan directory in the dvb-apps repository].

===Generating c/s/tzap tuning data===
Exactly as above, just specify output format zap/czap/xine with "-X" (uppercase X):
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -X >''cc-Ttttt''

===Defining output charset===
$ w_scan -f <FRONTEND_TYPE> -C <CHARSET> ...
Use 'iconv --list' for a list of possible output charsets, usually something like 'utf-8', 'iso8859-15'.
Needs 20110410 or higher.

==Also See==
* [[Frequency_scan#Comparison_of_DVB_frequency_scanning_commandline_utilities|Comparison of the scanning utilities]].
* man w_scan
* [[scan]]
* [[dvbscan]]

==External Links==
* [http://wirbel.htpc-forum.de/w_scan/index2.html Homepage (de)]
* [http://wirbel.htpc-forum.de/w_scan/index_en.html Homepage (en)]
* [http://edafe.org/vdr/w_scan/ English howto by edafe]

[[Category:Apps & Utilities]]

W scan

2012-01-11T18:07:11Z

Wirbel: /* Scanning DVB-T (Germany, Over-the-Air, VDR output) */

{{lowercase|w_scan}}

''w_scan'' is a small command line utility used to perform [[Frequency scan|frequency scan]]s for [[DVB]] and [[ATSC]] transmissions. It is not included in [[LinuxTV dvb-apps]], but complements the two [[Frequency scan|frequency scanning]] utilities available through [[LinuxTV dvb-apps]], [[Dvbscan|dvbscan]] and [[Scan|scan]].

''w_scan'' is capable of directly creating channels.conf files as well as initial tuning data for [[Scan|scan]].

==Obtaining w_scan==
''w_scan'' can be obtained [http://wirbel.htpc-forum.de/w_scan/index2.html here].

==Documentation==
Detailed information can be found in the ''w_scan'' man page (i.e. from a console, run <code>man w_scan</code>). Additionally, running ''w_scan'' with the -h parameter will produce an output that provides a summary of it's main command line options.
<pre>w_scan [options...] >> channels.conf</pre>

In general, when using ''w_scan'' you should at least specify three parameters: frontend type, country/satellite and output format. The following table summarizes the basic command line essentials for using ''w_scan''.

{| class="wikitable"
|+'''Basic w_scan commandline parameters and their respective options'''
|-
! Parameter !! Argument !! Description & Options

|-
| '''Frontend Type'''
| -f''Type''
|
a = ATSC (North America, cable and terrestrial) 
c = DVB-C (Europe, cable) 
s = DVB-S/S2 (Satellite) 
t = DVB-T (Europe, terrestrial = default) 

NOTE:
* ATSC support requires a w_scan version >= 20080815
* Satellite support requires a w_scan version >= 20090504)

|-
| '''ATSC Type'''
| -A''Type''
|
(ignored for DVB-C and DVB-T) 
1 = VSB ("Over-the-Air)" 
2 = QAM annex B ("cable TV") 
3 = both of them

|-
|'''Country ID'''
| -c''ID''
|
(mandatory for ATSC, DVB-C, DVB-T) 
uppercase two character identifier as defined in ISO 3166-1, 
(DE,FR,GB,US,FI,...) 
see -c? for list of countries.

|-
| '''Satellite ID'''
| -s''ID''
|
(mandatory for DVB-S/S2) 
uppercase character constant with E (east) or W (west) as separator, 
(S19E2,S13E0,S0W8,...) 
see -s? for list of satellites.

|-
| '''Output Format'''
| -''Format''
|
X = czap/tzap/xine channels.conf 
x = "initial tuning data" for [[Scan]] 
G = Gstreamer dvbsrc Plugin 
k = channels.dvb for [[Kaffeine]] 
L = VLC xspf playlist (experimental) 
M = mplayer format, similar to X 
If the output format is not specified, w_scan defaults to create [http://www.tvdr.de/ VDR-1.6 channels.conf].
|-
| '''VDR version'''
| -o''N''
|
6 = vdr-1.6.x 
7 = vdr-1.7.3 or higher
|-
| '''Help Level'''
| -''Level''
|
h = basic help 
H = extended help for expert functionality

|}

Some working examples, cobbled together from the basics given in the above table, are provided below. Note: ''Experts'' or ''experienced users'' may use some of the other ''w_scan'' options available, but this is not recommended. (For example, w_scan searches ''/dev/dvb/adapterX/frontendY'' for DVB/ATSC cards matching to option "-f", therefore specifying the adapter "-a XX" is not recommended.)

==Examples==
{{Note|As mentioned in the above table:
* ATSC support requires a w_scan version <nowiki> >= </nowiki> 20080815
* ATSC support was integrated in vdr-1.7.14, VDR output needs '-o 7'
* DVB-S/S2 support requires a w_scan version <nowiki> >= </nowiki> 20090504 }}

===Scanning ATSC VSB (United States, Over-the-Air)===
$ w_scan -fa -A1 -c US -X
===Scanning ATSC QAM annex B (United States, digital cable TV)===
$ w_scan -fa -A2 -c US -X
===Scanning DVB-T/T2 (Germany, Over-the-Air, VDR output)===
$ w_scan -ft -c DE

===Scanning DVB-C (Germany, digital cable TV, Kaffeine channels.dvb)===
$ w_scan -fc -c DE -k
===Scanning DVB-S/S2 (Astra 19.2east, vdr-1.7.x)===
$ w_scan -fs -s S19E2 -o 7
===Scanning DVB-S (Thor 0.8west, vdr-1.3.x .. vdr-1.6.x)===
$ w_scan -fs -s S0W8
===Scanning DVB-S (Hotbird, vdr-1.7, 4-port DiSeqC switch, hotbird at port 3)===
$ w_scan -o 7 -fs -s S13E0 -D2c
Note: ports are counting from '0'.

===Generating dvbscan tuning data===
Exactly as above, just specify output format dvbscan with "-x":
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -x >''cc-Ttttt''

If you choose to create an initial scan file (and you know the name of your local transmitter or cable provider), you can send the resulting file to the [http://linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dvb mailing list] after checking that it hasn't already been posted or added to the [http://linuxtv.org/hg/dvb-apps/file/tip/util/scan/ scan directory in the dvb-apps repository].

===Generating c/s/tzap tuning data===
Exactly as above, just specify output format zap/czap/xine with "-X" (uppercase X):
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -X >''cc-Ttttt''

===Defining output charset===
$ w_scan -f <FRONTEND_TYPE> -C <CHARSET> ...
Use 'iconv --list' for a list of possible output charsets, usually something like 'utf-8', 'iso8859-15'.
Needs 20110410 or higher.

==Also See==
* [[Frequency_scan#Comparison_of_DVB_frequency_scanning_commandline_utilities|Comparison of the scanning utilities]].
* man w_scan
* [[scan]]
* [[dvbscan]]

==External Links==
* [http://wirbel.htpc-forum.de/w_scan/index2.html Homepage (de)]
* [http://wirbel.htpc-forum.de/w_scan/index_en.html Homepage (en)]
* [http://edafe.org/vdr/w_scan/ English howto by edafe]

[[Category:Apps & Utilities]]

Frequency scan

2012-01-11T18:06:39Z

Wirbel:

In order to be able receive a particular signal with your TV tuner device you will need to tune/set it to the correct radio [[frequency]] used by that source transmission. Therefore, you (or, at least, the viewing application you are using) will first want to know which frequencies are used for transmission and thereby are tunable for your receiver at your location of residence. Frequency scanning utilities, listed below, perform such signal detection and, generally, provide a list of the frequencies upon which content is discovered, with which higher level applications can then in turn use for tuning purposes.

Note: Historically, the set of frequencies used under the older [[Analog TV|analogue systems]] have differed from one another, meaning that the particular frequencies used across North America, Europe, Asia, etc., etc., will differ depending upon the transmission standard adopted within each nation. When countries began to make the transition to [[Digital Video Broadcasting|digital TV systems]], most have opted to continue to use their old channel frequency schemes so as to make the switch from analog to digital systems as seamless as possible for the end user.

==Frequency Scanning Utilities==
===Analog===
* scantv (part of [[xawtv|xawtv package]], both branches)
* apps with built in scanning ... [[tvtime]], [[xawtv|xawtv/motv]] (which call upon scantv), [[kdetv]] ...

===Digital===
One of the handiest tools for scanning frequencies is "[[Scan|(dvb)scan]]", a utility included within the [[LinuxTV dvb-apps]] package. (dvb)scan parses the information from a pre-configured initial scan file that is specific to a particular country/region/location/service_provider (many of which are contained within the dvb-apps package as well as being available within the wiki or elsewhere), then tunes into the frequencies and lists the names for all available PIDs.

* [[alexplore]] (part of the [[xawtv#Associated_Utilities_2|v4 xawtv package]])
* [[dvbscan|dvbscan/scandvb/atscscan]]
* [[scan]]
* [[w_scan]]
* [[scan-s2]] [http://mercurial.intuxication.org/hg/scan-s2/]
* [[dvbv5-scan]]
* apps with built in scanning ... [[kaffeine]], [[MythTV]], [[Me TV]]

====Comparison of DVB frequency scanning commandline utilities====

{{Note|The differences between '''scan''' and '''dvbscan''' should be added to this wiki article. The information for dvbscan is still to be completed - please help.}}

The following table lists the main features of the different command line scanners. For specific information on usage, have a look at its specific wiki article.
 

{| border=1 cellpadding=10 cellspacing=0 valign="top"
|- bgcolor=#efefef valign="top"
|'''feature \ scanner'''
|'''[[scan]]'''
|'''[[dvbscan]]'''
|'''[[w_scan]]'''
|'''[[scan-s2]]'''
|'''[[dvbv5-scan]]'''
|-
|'''download'''
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://wirbel.htpc-forum.de/w_scan/index.html wirbel.htpc-forum.de/w_scan/index.html]
|[http://mercurial.intuxication.org/hg/scan-s2 mercurial.intuxication.org/hg/scan-s2]
|git clone git://linuxtv.org/mchehab/experimental-v4l-utils.git
|-
|'''last stable'''
|linuxtv-dvb-apps-1.1.1 (outdated, May 2006)
| ?
|none / use latest version
|none / use latest version
|none / use latest version
|-
|'''comments'''
|linuxtv.org maintained '''DVB-S2 support missing''' needs dvb driver with API-3.2 or 5.x
|linuxtv.org maintained
|compiling needs dvb driver with API-5.0 or higher usage needs API-3.2 or API-5.x
|needs dvb driver with 5.0 or higher last update 02/2009
|needs dvb driver with 5.5 or higher in development (01/2012)
|-
|'''supported DTV types'''
|DVB-S, DVB-C(Europe), DVB-T, ATSC (VSB and QAM), DMB-TH (China)
| ?
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T/T2, ATSC (VSB and QAM), DMB-TH (China)
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T, ATSC (VSB and QAM)
|ISDB-T,(others? - to be added here..)
|-
|'''initial scan file required''' (matching to your satellite or local aerial/cable network)
|yes (use dvb-apps hg from linuxtv.org)
|yes (use dvb-apps hg from linuxtv.org)
|'''not required'''
|yes (use dvb-apps hg from linuxtv.org) ''NOTE: slightly different file format from scan because of additional DVB-S2 support.''
|yes (other file format)
|-
|'''can generate initial scan file'''
|no
|no
|'''yes'''
|no
|no
|-
|'''can generate channels.conf for zap/xine/mplayer/vlc'''
|yes (default)
|?
|yes
|yes
|(to be added here..)
|-
|'''can generate channels.conf for [http://www.tvdr.de/ VDR]'''
|yes, but hopeless outdated (vdr-1.3 only)
|?
|yes (default)
|yes (default)
|(to be added here..)
|-
|'''can generate channels.dvb for kaffeine'''
|no
|?
|yes
|no
|(to be added here..)
|}

==External Links==
'''Analog'''
*
'''Digital'''
For some other general sources (which may or may not be that useful) for finding local channel frequency lists, see:
* http://www.vdr-wiki.de/wiki/index.php/Kanal_DVB-T - DVB-T channels in Europe
* http://www.wohnort.demon.co.uk/DAB/
* http://www.digitalspy.co.uk/terrestrial/tuning/
[[Category:Software]]

Frequency scan

2012-01-10T08:39:51Z

Wirbel: and dvbv5-scan to comparison

In order to be able receive a particular signal with your TV tuner device you will need to tune/set it to the correct radio [[frequency]] used by that source transmission. Therefore, you (or, at least, the viewing application you are using) will first want to know which frequencies are used for transmission and thereby are tunable for your receiver at your location of residence. Frequency scanning utilities, listed below, perform such signal detection and, generally, provide a list of the frequencies upon which content is discovered, with which higher level applications can then in turn use for tuning purposes.

Note: Historically, the set of frequencies used under the older [[Analog TV|analogue systems]] have differed from one another, meaning that the particular frequencies used across North America, Europe, Asia, etc., etc., will differ depending upon the transmission standard adopted within each nation. When countries began to make the transition to [[Digital Video Broadcasting|digital TV systems]], most have opted to continue to use their old channel frequency schemes so as to make the switch from analog to digital systems as seamless as possible for the end user.

==Frequency Scanning Utilities==
===Analog===
* scantv (part of [[xawtv|xawtv package]], both branches)
* apps with built in scanning ... [[tvtime]], [[xawtv|xawtv/motv]] (which call upon scantv), [[kdetv]] ...

===Digital===
One of the handiest tools for scanning frequencies is "[[Scan|(dvb)scan]]", a utility included within the [[LinuxTV dvb-apps]] package. (dvb)scan parses the information from a pre-configured initial scan file that is specific to a particular country/region/location/service_provider (many of which are contained within the dvb-apps package as well as being available within the wiki or elsewhere), then tunes into the frequencies and lists the names for all available PIDs.

* [[alexplore]] (part of the [[xawtv#Associated_Utilities_2|v4 xawtv package]])
* [[dvbscan|dvbscan/scandvb/atscscan]]
* [[scan]]
* [[w_scan]]
* [[scan-s2]] [http://mercurial.intuxication.org/hg/scan-s2/]
* [[dvbv5-scan]]
* apps with built in scanning ... [[kaffeine]], [[MythTV]], [[Me TV]]

====Comparison of DVB frequency scanning commandline utilities====

{{Note|The differences between '''scan''' and '''dvbscan''' should be added to this wiki article. The information for dvbscan is still to be completed - please help.}}

The following table lists the main features of the different command line scanners. For specific information on usage, have a look at its specific wiki article.
 

{| border=1 cellpadding=10 cellspacing=0 valign="top"
|- bgcolor=#efefef valign="top"
|'''feature \ scanner'''
|'''[[scan]]'''
|'''[[dvbscan]]'''
|'''[[w_scan]]'''
|'''[[scan-s2]]'''
|'''[[dvbv5-scan]]'''
|-
|'''download'''
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://linuxtv.org/hg/dvb-apps linuxtv.org/hg/dvb-apps]
|[http://wirbel.htpc-forum.de/w_scan/index.html wirbel.htpc-forum.de/w_scan/index.html]
|[http://mercurial.intuxication.org/hg/scan-s2 mercurial.intuxication.org/hg/scan-s2]
|git clone git://linuxtv.org/mchehab/experimental-v4l-utils.git
|-
|'''last stable'''
|linuxtv-dvb-apps-1.1.1 (outdated, May 2006)
| ?
|none / use latest version
|none / use latest version
|none / use latest version
|-
|'''comments'''
|linuxtv.org maintained '''DVB-S2 support missing''' needs dvb driver with API-3.2 or 5.x
|linuxtv.org maintained
|compiling needs dvb driver with API-5.0 or higher usage needs API-3.2 or API-5.x
|needs dvb driver with 5.0 or higher last update 02/2009
|needs dvb driver with 5.5 or higher in development (01/2012)
|-
|'''supported DTV types'''
|DVB-S, DVB-C(Europe), DVB-T, ATSC (VSB and QAM), DMB-TH (China)
| ?
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T, ATSC (VSB and QAM), DMB-TH (China)
|DVB-S, '''DVB-S2''', DVB-C(Europe), DVB-T, ATSC (VSB and QAM)
|ISDB-T,(others? - to be added here..)
|-
|'''initial scan file required''' (matching to your satellite or local aerial/cable network)
|yes (use dvb-apps hg from linuxtv.org)
|yes (use dvb-apps hg from linuxtv.org)
|'''not required'''
|yes (use dvb-apps hg from linuxtv.org) ''NOTE: slightly different file format from scan because of additional DVB-S2 support.''
|yes (other file format)
|-
|'''can generate initial scan file'''
|no
|no
|'''yes'''
|no
|no
|-
|'''can generate channels.conf for zap/xine/mplayer/vlc'''
|yes (default)
|?
|yes
|yes
|(to be added here..)
|-
|'''can generate channels.conf for [http://www.tvdr.de/ VDR]'''
|yes, but hopeless outdated (vdr-1.3 only)
|?
|yes (default)
|yes (default)
|(to be added here..)
|-
|'''can generate channels.dvb for kaffeine'''
|no
|?
|yes
|no
|(to be added here..)
|}

==External Links==
'''Analog'''
*
'''Digital'''
For some other general sources (which may or may not be that useful) for finding local channel frequency lists, see:
* http://www.vdr-wiki.de/wiki/index.php/Kanal_DVB-T - DVB-T channels in Europe
* http://www.wohnort.demon.co.uk/DAB/
* http://www.digitalspy.co.uk/terrestrial/tuning/
[[Category:Software]]

Main Page

2012-01-04T15:30:13Z

Wirbel: revert change

__NOTOC__
__NOEDITSECTION__

<div style="background-color:#6289AB; padding:0.3em; color:#ffffff; font-weight:bold; font-size:150%; text-align:center">
Welcome to the linuxtv.org V4L-DVB Wiki !
</div>
{|valign=top background=none
|valign=top|
<div style="vertical-align:top; margin:0; border:1px solid #6289AB; padding:0.5em; background-color:#ffffff">

This wiki is intended to become an authoritative source of information regarding the use of analog video and digital TV sources under Linux -- i.e. the subject matters covered under the V4L-DVB framework. The basic plan is to aggregate information about: available hardware; how v4l or dvb work; software used with the hardware and so forth.
Like all other wikis, the V4L-DVB wiki relies upon the contributions of its users. Hence, it will only be as useful as we make it! So we encourage you to share your knowledge and help with the task of turning this site into a grand repository of knowledge. Your input (whether it be by providing a set of instructions for how to get a certain device working; a minor improvement to an existing article; or an explanation for some complex concept) will be highly appreciated.

-- [[LinuxTVWiki:People|The LinuxTV V4L-DVB wiki team]] / [[People behind V4L-DVB]]

</div>
|}

<div style="vertical-align:top; margin:0; border:1px solid #6289AB; padding:0.5em; background-color:#ffffff">
{|valign=top cellpadding=0 cellspacing=5 width=100%
| valign=top | [[Image:News_icon2.png|50px]]
| '''GENERAL NEWS:''' 
'''No News is Good News?''' 
Its been a while since the last news post, but nothing in particular really jumps out as having occurred around here ... unless, of course, you count the general day by day activities such as: more new drivers, work on the utilities, some ongoing refinement of the build config, the creation of a [[tvtime]] development repo here on LinuxTV, changes to the patchwork system (see the main page), and etc., etc., etc.

Although this stands as short notice to the fact, please take note of the '''Media Subsystem Workshop''' being held '''Oct 23-25''', happening in along side the '''2011 Linux Kernel Summit''' (see the main page for more details). -- 02:21, 18 October 2011 (CEST) 

'''Free at Last, Free at Last: A Final Fairwell to V4L1 ... And Just What the Heck is xf86-video-v4l Anyway ?''' 
Upon release of the forthcoming 2.6.38 kernel, all but a very few vestiges of the antiquated V4L1 API will have been removed forever in favour of its successor, the V4L2 API (which, itself, now resides within the larger [[Development: Linux Media Infrastructure API|Linux Media Infrastructure API]]).

One of the more obvious ramifications of this significant change is ... ''[[News Archive|cont'd here]]'' -- 03:43, 13 February 2011 (UTC)
|-
| || align=right| ''For older news items see [[News Archive|here]]
|}
</div>

{| style="border: solid 1px; border-color:#6289AB; margin: oem; background-color: #6289AB;" cellspacing=5 cellpadding=1 width="100%"
| valign=top |

{| cellspacing=0 cellpadding=5 border=0 width="100%"

| valign=top | [[Image:index.png|50px]]
| valign=top | '''[[Special:Allpages|The Wiki's Indexes]]''' Article, category, image, ....
| valign=top ; style="background-color:#FFFFCC;" | [[Image:User_Info_icon.png|50px]]
| valign=top ; style="background-color:#FFFFCC;" | '''[[User Information]]''' How to install drivers for your hardware, and software to use with your device, ...
| valign=top ; style="background-color:#F5DEB3;" | [[Image:Technical_background_icon.png|50px]]
| valign=top ; style="background-color:#F5DEB3;" | '''[[Technical Background]]''' Technical details on standards and hardware components/chipsets, etc
|-
|-
|-

| valign=top | [[Image:More_info.png|50px|]]
| valign=top | '''[[Other Sources of Info]]''' Mailing lists, #irc channels....
| valign=top ; style="background-color:#FFFFCC;" | [[Image:Hardware_icon.png|50px]]
| valign=top ; style="background-color:#FFFFCC;" | '''[[Hardware Device Information]]''' Information on hardware devices
| valign=top ; style="background-color:#F5DEB3;" | [[Image:Developer_icon.png|50px]]
| valign=top ; style="background-color:#F5DEB3;" | '''[[Developer Section]]''' Information to help device driver development
|-
|-
|-

|}
|}

<div style="margin:0; border:1px solid #6289AB; padding:0.5em; background-color:#F7F9FB;">
{|valign=top cellpadding=0 cellspacing=0 width=100%
|valign=top bgcolor=#F7F9FB width=32%|
=='''The Wiki - How Can I Help?'''==
* [[Help:Contents|Everything you need to know about editing wiki pages but were afraid to ask]]
** [http://www.mediawiki.org/wiki/Help:Moving_a_page Help: Renaming/Moving a Page]
* [[Wiki - Help Wanted List|A list of things that need to be tackled]]
* [[Wiki - New Device Copy & Paste Template|New Device Copy & Paste Template]]

|valign=top bgcolor=#F7F9FB width=4%|
|valign=top bgcolor=#F7F9FB width=32%|

|}
</div>

[[Category:LinuxTV]]

Hauppauge

2011-11-22T17:53:52Z

Wirbel: /* DVB Products */

Hauppauge Computer Works is an U.S. based [[List of Device Vendors|vendor]] of multimedia PC devices.

Hauppauge derives its name from the hamlet in Suffolk county, N.Y. (located on Long Island) within which the company is headquartered. Codenames used for the company's devices (as seen within Window driver INF files) are often drawn from the names of surrounding community areas on Long Island.

On October 29, 2008, Hauppauge purchased the [[Pinnacle]] PCTV product range and related assets from parent company Avid Technology, with the transaction expected to close before the end of Q4 2008. Hauppauge is apparently intending to continue to market the Pinnacle range of devices under the PCTV brand line.

==Digital Devices==
Many of Hauppauge's early [[DVB-S]] and [[DVB-T]] products were actually rebranded [[TechnoTrend]] devices. This, however, is no longer the case today.

'''WinTV-NOVA''' 
Hauppauge uses the ''WinTV-NOVA'' moniker for their digital TV PCI cards that lack an onboard MPEG-2 decoder (i.e. the designation is used for their so-called "budget" or software decoding cards). The ''-C'', ''-S'' or ''-T'' suffices respectively signify whether the device is intended for [[DVB-C]], [[DVB-S]] or [[DVB-T]] reception.

'''WinTV-NEXUS''' 
Hauppauge used the ''WinTV-NEXUS'' moniker for digital TV PCI cards that included an onboard MPEG-2 decoder; these were rebranded Technotrend SkyStar 1.x [[full-featured Card|full-featured card]]s to which a second PCI card could be interconnected to provide hardware support for Common Interface subscription-TV modules.

'''WinTV-HVR''' 
The ''WinTV-HVR'' moniker is used for Hauppauge's hybrid line of devices (i.e. they feature both analog and digital tuning capabilities). The "HVR" stands for Hybrid Video Recorder.

=== ATSC/ClearQAM Products ===
{| class="wikitable sortable"
|+'''Sortable Table of ATSC/ClearQAM (USA) Devices sold by Hauppauge'''
|-
! Model !! Standard !! Interface !! Supported !!class="unsortable"| Comments
|-
| [[Hauppauge WinTV-D|WinTV-D]] || [[ATSC]] || [[PCI]] || {{No}} || analog works though
|-
| [[Hauppauge WinTV-HD|WinTV-HD]] || [[ATSC]] || [[PCI]] || {{No}} ||
|-
| [[Hauppauge WinTV-HVR-850|WinTV-HVR-850]] || [[ATSC]] & NTSC || USB 2.0 || {{Yes}} || Analog and Digital "hybrid" stick; two versions exist -- essentially rebrands of the 950 & 950Q models
|-
| [[Hauppauge WinTV-HVR-950|WinTV-HVR-950]] || [[ATSC]] & NTSC || USB 2.0 || {{Yes}} || Analog and Digital (ATSC-only) "hybrid" stick
|-
| [[Hauppauge WinTV-HVR-950Q|WinTV-HVR-950Q]] || [[ATSC]] & ClearQAM & NTSC || USB 2.0 || {{Yes}} || Analog and Digital "hybrid" stick
|-
| [[Hauppauge WinTV-HVR-1250|WinTV-HVR-1250]] || [[ATSC]] & ClearQAM & NTSC || [[PCIe]] || {{Yes}} || Digital mode only currently.
|-
| [[Hauppauge WinTV-HVR-1255|WinTV-HVR-1255]] || [[ATSC]] & ClearQAM & NTSC || [[PCIe]] || {{No}} ||
|-
| [[Hauppauge WinTV-HVR-1500|WinTV-HVR-1500]] || [[ATSC]] & ClearQAM & NTSC || ExpressCard || {{Yes}} || Digital mode only currently.
|-
| [[Hauppauge WinTV-HVR-1600|WinTV-HVR-1600]] || [[ATSC]] & ClearQAM & NTSC || [[PCI]] || {{Yes}} || Analog and Digital "combo" card.
|-
| [[Hauppauge WinTV-HVR-1800|WinTV-HVR-1800]] || [[ATSC]] & ClearQAM & NTSC || [[PCIe]] || {{Yes}} || Digital mode in recent kernels. Analog hardware mpeg encoder requires kernel 2.6.26
|-
| [[Hauppauge WinTV-HVR-1850|WinTV-HVR-1850]] || [[ATSC]] & ClearQAM & NTSC || [[PCIe]] || {{No}} ||
|-
| [[Hauppauge WinTV-HVR-1950|WinTV-HVR-1950]] || [[ATSC]] & ClearQAM & NTSC || [[Universal Serial Bus|USB 2.0]] || {{Yes}} ||
|-
| [[Hauppauge WinTV-HVR-2250|WinTV-HVR-2250]] || [[ATSC]] & ClearQAM & NTSC || [[PCIe]] || {{Yes}} || Digital mode only currently
|-
|}

=== DVB Products ===
{| class="wikitable sortable"
|+'''Sortable Table of DVB (digital and hybrid) Devices sold by Hauppauge'''
|-
! Model !! Standard !! Interface !! Supported !!class="unsortable"| Comments
|-
| [[Hauppauge WinTV-HVR-900|WinTV-HVR-900]] || [[DVB-T]] || USB 2.0 Stick || {{Yes}} || Bus powered. Apparently more then one version (models 65008 & 65018).
|-
| [[Hauppauge WinTV-HVR-900H|WinTV-HVR-900H]] || [[DVB-T]] || USB 2.0 Stick || {{Yes}} || Bus powered, model 66009, TM6010 based, no analoge audio!
|-
| [[Hauppauge WinTV-HVR-930|WinTV-HVR-930]] || [[DVB-T]] || USB 2.0 Stick || {{No}} || (France) - Bus powered
|-
| [[Hauppauge WinTV-HVR-930C|WinTV-HVR-930C]] || [[DVB-T]] & [[DVB-C]] & PAL || USB 2.0 Stick || {{Yes}} || Analog & Digital hybrid, initial support: 20111121
|-
| [[Hauppauge WinTV-HVR-1100|WinTV-HVR-1100]] || [[DVB-T]] || [[PCI]] || {{Yes}} || Analog and Digital "hybrid" card (rectangular shape)
|-
| [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] || [[DVB-T]] || [[PCI]] || {{Yes}} || Analog and Digital "hybrid" card (triangular shape)
|-
| [[Hauppauge WinTV-HVR-1200|WinTV-HVR-1200]] || [[DVB-T]] || [[PCIe]] || {{Yes}} || Digital mode only currently.
|-
| [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] || [[DVB-T]] || [[PCI]] || {{Yes}} || Analog and Digital "hybrid" card - features a hardware MPEG encoder
|-
| [[Hauppauge WinTV-HVR-1700|WinTV-HVR-1700]] || [[DVB-T]] || [[PCIe]] || {{Yes}} || Digital mode only currently.
|-
| [[Hauppauge WinTV-HVR-1900|WinTV-HVR-1900 USB]] || [[DVB-T]] & PAL || [[Universal Serial Bus|USB 2.0]] || {{Yes}} || [[Hybrid]] [[DVB-T]] [[USB]] device.
|-
| [[Hauppauge WinTV-HVR-2200|WinTV-HVR-2200]] || [[DVB-T]] || [[PCIe]]|| {{Yes}} || Digital mode only currently
|-
| [[Hauppauge WinTV-HVR-3000|WinTV-HVR-3000]] || [[DVB-T]] & [[DVB-S]] || [[PCI]] || {{Yes}} || Requires kernel 2.6.28. Analog support unknown.
|-
| [[Hauppauge WinTV-HVR-3300|WinTV-HVR-3300]] || [[DVB-T]] & [[DVB-S]] || [[PCIe]] || {{Unknown}} ||
|-
| [[Hauppauge WinTV-HVR-4000|WinTV-HVR-4000]] || [[DVB-T]] & [[DVB-S]] & [[DVB-S2]] || [[PCI]] || {{Yes}} ||
|-
| [[Hauppauge WinTV-HVR-4400|WinTV-HVR-4400]] || [[DVB-T]] & [[DVB-S]] & [[DVB-S2]] || [[PCIe]] || {{No}} ||
|-
| [[Hauppauge WinTV-HVR-5500|WinTV-HVR-5500]] || [[DVB-T]] & [[DVB-S]] & [[DVB-S2]] & [[DVB-C]] || [[PCIe]] || {{No}} ||
|-
| [[Hauppauge WinTV-NOVA-SE2|WinTV-NOVA-SE2]] || [[DVB-S]] || [[PCI]] || {{Yes}} ||
|-
| [[Hauppauge WinTV-NOVA-S PCI|WinTV-NOVA-S PCI]] || [[DVB-S]] || [[PCI]] || ||
|-
| [[Hauppauge WinTV-NOVA-S SE|WinTV-NOVA-S SE]] || [[DVB-S]] || [[PCI]] || {{Unknown}} ||
|-
| [[Hauppauge WinTV-NOVA-S-Plus|WinTV-NOVA-S-Plus]] || [[DVB-S]] || [[PCI]] || {{Yes}} ||
|-
| [[Hauppauge WinTV-NOVA-T-Stick|WinTV-NOVA-T-Stick]] || [[DVB-T]] || USB 2.0 Stick || {{Yes}} || Bus powered
|-
| [[Hauppauge WinTV-NOVA-TD-Stick|WinTV-NOVA-TD-Stick]] || [[DVB-T]] || USB 2.0 Stick || {{Yes}} || Bus powered
|-
| [[Hauppauge WinTV-Duet-HD-Stick|WinTV-Duet-HD-Stick]] || [[DVB-T]] || USB 2.0 Stick || {{Yes}} || Bus powered
|-
| [[Hauppauge WinTV-NOVA-T-CE-Stick|WinTV-NOVA-T-CE-Stick]] || [[DVB-T]] || USB 2.0 Stick || || (Germany) - Bus powered
|-
| [[Hauppauge WinTV-NOVA-T-USB2|WinTV-NOVA-T-USB2]] || [[DVB-T]] || USB 2.0 || {{Yes}} || Bus powered
|-
| [[Hauppauge WinTV-NOVA-CI PCI|WinTV-NOVA-CI PCI]] || [[DVB-S]] || [[PCI]] || || Card with optional CI-Interface
|-
| [[Hauppauge WinTV-NOVA-C PCI|WinTV-NOVA-C PCI]] || [[DVB-C]] || [[PCI]] || ||
|-
| [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]] || [[DVB-T]] || [[PCI]] || {{Yes}} ||
|-
| [[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]] || [[DVB-T]] || [[PCI]] || {{Yes}} || Dual tuner card whose receivers are actually USB based
|-
| [[Hauppauge WinTV-NOVA-T-500#WinTV-NOVA-TD-500|WinTV-NOVA-TD-500]] || [[DVB-T]] || [[PCI]] || {{No}} || Dual tuner card whose receivers are actually USB based
|-
| [[FF Rev. 2.1 DVB-S Cards|WinTV-NEXUS-S Rev. 2.1]] || [[DVB-S]] || [[PCI]] || || Card with optional CI Interface Module
|-
| [[FF Rev. 2.2 DVB-S Cards|WinTV-NEXUS-S Rev. 2.2]] || [[DVB-S]] || [[PCI]] || || Card with optional CI Interface Module
|-
| [[FF Rev. 2.3 DVB-S Cards|WinTV-NEXUS-S Rev. 2.3]] || [[DVB-S]] || [[PCI]] || || Card with optional CI Interface Module
|-
| [[Hauppauge WinTV-NOVA-S USB|WinTV-NOVA-S USB]] || [[DVB-S]] || [[Universal Serial Bus|USB 1.1]] || {{Yes}} ||
|-
| [[Hauppauge WinTV-NOVA-S-USB2|WinTV-NOVA-S-USB2]] || [[DVB-S]] || [[Universal Serial Bus|USB 2.0]] || {{No}} ||
|-
| [[Hauppauge WinTV-NOVA-HD-S2|WinTV-NOVA-HD-S2]] || [[DVB-S2]] || [[PCI]] || {{Unknown}} ||
|-
| [[Hauppauge WinTV-NOVA-HD-USB2|WinTV-NOVA-HD-USB2]] || [[DVB-S2]] || [[Universal Serial Bus|USB 2.0]] || {{No}} ||
|-
| [[Hauppauge WinTV-NOVA-T USB|WinTV-NOVA-T USB]] || [[DVB-T]] || [[Universal Serial Bus|USB 1.1]] || {{Yes}} ||
|-
| [[Hauppauge DEC1100-T USB|DEC1100-T USB]] || [[DVB-T]] || [[Universal Serial Bus|USB 1.1]] || {{Unknown}} ||
|-
| [[Hauppauge DEC2000-T USB|DEC2000-T USB]] || [[DVB-T]] || [[Universal Serial Bus|USB 1.1]] || {{Yes}} || Device with MPEG Decoder, can get used as standalone STB
|-
| [[Hauppauge DEC2540-T USB|DEC2540-T USB]] || [[DVB-T]] || [[Universal Serial Bus|USB 1.1]] || {{Yes}} || Device with MPEG Decoder, can get used as standalone STB, decoder card slot not supported
|-
| [[Hauppauge DEC3000-S USB|DEC3000-S USB]] || [[DVB-S]] || [[Universal Serial Bus|USB 1.1]] || {{Yes}} || Device with MPEG Decoder, can get used as standalone STB
|}

==Analog Devices==

{| class="wikitable sortable"
|+'''Sortable Table of analog-only devices sold by Hauppauge'''
|-
! Model !! Standard !! Interface !! Supported !!class="unsortable"| Comments
|-
| [[WinTV-PVR-150]] || NTSC/PAL || [[PCI]] || {{Yes}} || One tuner, MPEG2 hardware Encoder
|-
| [[WinTV-PVR-250]] || NTSC/PAL || [[PCI]] || {{Yes}} || One tuner, MPEG2 hardware Encoder
|-
| [[WinTV-PVR-350]] || NTSC/PAL || [[PCI]] || {{Yes}} || One tuner, MPEG2 hardware Encoder and Decoder
|-
| [[WinTV-PVR-500]] || NTSC/PAL || [[PCI]] || {{Yes}} || Two tuners
|-
| [[Hauppauge WinTV-PVR-USB2|WinTV-PVR-USB2]] || NTSC/PAL || [[USB]] || {{Yes}} || MPEG2 hardware Encoder and Decoder
|-
| [[WinTV-GO-Plus]] || NTSC/PAL || [[PCI]] || || Software Encoder
|-
| [[WinTV-GO-FM]] || NTSC/PAL || [[PCI]] || || Software Encoder
|-
| [[WinTV-Radio]] || NTSC/PAL || [[PCI]] || || Software Encoder
|-
| [[WINTV PAL-B/G 38104 REV.B208]] || PAL || [[PCI]] || {{Yes}} || Software Encoder
|-
| [[ImpactVCB]] || Video || [[PCI]] || || No tuners, only video-in
|-
| [[WinTV-USB]] || NTSC/PAL || [[USB]] || || Software Encoder
|-
| [[WinTV-USB2]] || NTSC/PAL || [[USB]] || || Software Encoder
|-
| [[WinTV-USB-FM]] || NTSC/PAL || [[USB]] || || Software Encoder
|-
| [[USB-Live]] || NTSC/PAL || [[USB]] || || Software Encoder
|}

* Hauppauge WINTV DBX TV Stereo 125CHNL TV Tuner w/FM Stereo Radio PCI -- [[http://www.linuxjournal.com/node/8116/print writeup in Linux Journal]]
* Hauppauge WinTV USB 2 [http://linuxtv.org/v4lwiki/index.php/Em2880 Details]

===Analog Video Grabbing===
* Impact VCB (Model 64XXX) 00558
* USB-Live (Model 403XX) 00609

===Analog TV Viewing===
* WinTV Express (Model 44XXX) 00751
* WinTV GO 2 (Model 347XX) 00750
* WinTV PCI-FM (Model 345XX) 00718
* WinTV USB (Model 402XX) 00569
** Supported by the USBVision driver
* WinTV USB-FM (Model 402XX) 00568
* WinTV USB2 (Model 420XX) 01017
** Supported by the em28xx driver

===Personal Video Recording===
* WinTV PVR-USB2 (Model 24xxx) 00960
* WinTV PVR-150 (Model 26xxx) 01048
* WinTV PVR-350 (Model 48xxx) 00991
* WinTV PVR-500 (Model 23xxx) 01072

* HD PVR [http://www.hauppauge.com/site/products/data_hdpvr.html] ... [http://www.mythtv.org/wiki/index.php/Hauppauge_HD-PVR MythTV page]

===Music, Video, Picture===
* MediaMVP (Model 86xxx) 01005
* Wireless MediaMVP (Model 86xxx) 01133

==Hauppauge Model Synopsis and internal names==

BT848 based boards have the following Model numbers:
56XXX Mattituck WinCast
58XXX "Little Mattituc" WinTv analogue
60XXX "Plum Island" EuroCast
BT878 based boards have the following Model numbers:
64xxx Capture only (Impact VCB)
61xxx "Robins Island"
44xxx Neptune
39xxx Bridgehampton (WinTV-D ?)
38xxx Orient Point
37xxx Aquebogue WinTV Theatre
CX23881 based boards have the following Model numbers:
34xxx Pluto
33xxx ????

Model 14xxx: WinTV-HVR-3000
Model 23xxx: Amity2DT PVR500-MCE (WinTV-PVR-500)
Model 24xxx: WinTV-PVR-USB2 (see also 29xxx)
Model 25xxx: Baldwin2 (low profile) PVR150LP-MCE
Model 26xxx: Amity2 PVR150-MCE
260xx: WinTV PVR-150 Retail (no radio, with IR, no Audio RCA)
265xx: WinTV PCR-150 MCE (and OEM) (with radio, no IR, with Audio RCA)
Model 28xxx: Roslyn, OEM only ! (follows Conexant Blackbird reference Design)
This card has sometimes been incorrectly called the "PVR-250MCE". It has no official name other than its codename: "Rosyln
In US it was also sold as PVR-160 (by Fry electronics and others...)
Model 29xxx: Dering Harbor WinTV PVR USB2 /Retail (see also 24xxx)
Model 30xxx: Baldwin1 or "Baldwin Harbor" (PVR 250 MCE LP)
Model 32xxx: Amity1 or "Amity Harbor" WinTV PVR 250 /Retail (32059 MultiPAL, 32065 PAL B/G)
320xx: WinTV PVR 250 (no Radio, with IR, no RCA Audio)
325xx: WinTV PVR 250 MCE (or OEM or Freestyle) (with Radio, no IR, with Audio RCA)
Model 39xxx: WinTV-D
Model 40xxx: Waterville WinTV USB /USB FM/ MyTV2Go (Mac)
Model 42xxx: Deltron WinTV USB2
Model 43xxx: Uranus WinTV PVR USB
Model 45xxx: "Solo Jr." WinTV PVR PCI (with Kfir chip)
Model 46xxx: WinTV HD (ATSC/NTSC)
Model 47xxx: WinTV-Nova-S-USB2
Model 48xxx: Sag Harbor
Model 480xx: PVR 250 ?? (without saa7127, no tv out)
Model 481xx: PVR 350 ?? (with saa7127, with tv out)
Model 484xx: OEM Freestyle aka PVR 250 MCE( white and red audio r+l rca jacks)
Model 64xxx: New Suffolk Impact VCB
Model 65xxx: 65008, 65018: WinTV-HVR-900 (EM2880) / 65009, 65019: Win-TV-HVR-930 (France)
65201 WinTV-HVR-950 (USA)
Model 66xxx: 66009 WinTV-HVR-900H (TM6010, no analoge audio!)
Model 67xxx: WinTV-HVR-1110 (France?)
Model 69xxx: 69009 WinTV-HVR-4000 /69100 WinTV-Nova-HD-S2 / 69500 WinTV-Nova-S2-HD
Model 69100/69500: WinTV-Nova-HD-S2 (DVB-S2)
Model 70xxx: WinTV-Nova-T-Stick
Model 71xxx: WinTV-HVR-1200 (OEM only?)
Model 74xxx: WinTV-HVR-1600
Model 75xxx; WinTV-HVR-1500
Model 76xxx: WinTV-HVR-1800LP
Model 78xxx: WinTV-HVR-1800
Model 79xxx: WinTV-HVR-1250
Model 86xxx: "Video Dongle" MVP / MediaMVP
Model 90xxx: Chelsea WinTV-Nova-T PCI (after August 2004)
Model 90501: (UHF/VHF),
Model 90500: (UHF) Nova-T MCE Chelsea DVB-T
Model 92xxx: Bremman 92001 WinTV-Nova-S-Plus / 92500 WinTV-Nova-SE2 (only DVB-S connector, no other connectors)
Model 93xxx: WinTV-Nova-T USB2
Model 94xxx: WinTV-HVR-1100 (Oxford)
Model 95xxx: 95809 WinTV-Nova-TD-Stick
Model 96xxx: WinTV-HVR-1300 (Dover)
Model 98xxx: WinTV-HVR-1100 LP (Oxford HH)
Model 99xxx: WinTV-Nova-T-500

Some Cards are OEM Technotrend cards and don't have Model numbers:
(mappings from http://www.dvbshop.net/media/products/0741593001144144930.pdf)
WinTV-Nova-S-PCI (=TT Budget 1500)
WinTV-Nova-S-USB (=TT Connect S1810)
WinTV-Nova-SE PCI(= TT BudgetS1400)
WinTV-Nova-CI-S PCI
WinTV-Nova-T (TT Budget) [Note: this is a different card from WinTV-Nova-T-PCI !)
WinTV-Nova-T-USB (Connect T1900)
WinTV-Nova-C-SUB (Connect C1100)
WinTV-Nexus-S (=TT Premium 2300)
WinTV-Nexus-CA (=TT Premium C2300 ???)
...

Note: MCE boards have no IR, but use the bracket space for RCA Audio (R+L)
Note2: The term "Freestyle" is often used for OEM non-Retail versions of the cards. These are MCE cards technically.
Note3: Sometimes OEM cards have fm radio (where the retail cards lacks this)

== External Links ==
* [http://www.hauppauge.com/ Hauppauge website]
** [http://www.hauppauge.com/site/support/support_faq_linux.html Linux FAQ]
** [http://www.hauppauge.com/site/support/linux.html Hauppauge Support: Running WinTV under Linux]
** [http://www.hauppauge.de/de/site/support/support_linux.html Hauppauge Support (German): Unterstützung in Ubuntu]
** Hauppauge's [http://www.hauppauge.com/pages/press/press_pictures_digital.html old press pictures page] and [http://www.hauppauge.com/site/press/index.html new press pictures page] (useful for product identification)
* [http://en.wikipedia.org/wiki/Hauppauge_Computer_Works Wikipedia's Hauppauge page] (useful for some product info)

[[Category:Vendor]]

Text capture

2011-10-09T08:03:07Z

Wirbel: /* Applications */ adding vdr with osdteletext

[[Teletext|Teletext / Videotext]] is popular in Europe and provides both informational pages and captions or subtitles to television programs. In 1992, teletext was provided in 18 countries.

In North America, [http://www.fcc.gov/cgb/dro/caption.html US federal law] requires [http://www.robson.org/capfaq/ closed captioning] of all non-exempt television programs starting in 2006. Some broadcasters are implementing [http://www.robson.org/capfaq/technical.html#XDS XDS], or Extended Data Services.

TV capture chipsets implement teletext and closed captioning in different ways, and the free software code to support text capture is still missing or incomplete for some chipsets.

===Analog television===
The [http://en.wikipedia.org/wiki/VBI vertical blanking interval (VBI)] is an interval in a television signal that temporarily suspends transmission of the signal for the electron gun to move back up to the first line of the television screen to trace the next screen field. The vertical blanking interval can be used to carry data, since anything sent during the VBI would naturally not be displayed; various test signals, closed captioning, and other digital data can be sent during this time period.

In the PAL standard, [http://en.wikipedia.org/wiki/Teletext Teletext] and Caption data is digitally encoded in the VBI on lines 17 through 20.

In North America, which follows the NTSC standard, [http://www.robson.org/capfaq/ closed captioning] uses line 21 of the VBI.

===Digital television (DTV) ===
====DVB====
The European standards [http://www.etsi.org ETSI EN 300 472] "Specification for conveying ITU-R System B Teletext in DVB bitstreams" and [http://www.etsi.org ETSI EN 301 775] "Specification for the carriage of Vertical Blanking Information (VBI) data in DVB bitstreams".

The DVB standard transmits sliced VBI data in a separate elementary stream.

====ATSC====
The [http://www.atsc.org/standards/a53.html A/53 ATSC Digital Television Standard] covers Closed Caption transport and the "digital" Closed Caption standard [http://global.ihs.com EIA 708-B]. See the [http://en.wikipedia.org/wiki/EIA-708 EIA-708 Wikipedia entry] and [http://www.robson.org/capfaq/dtv.html Digital Television Closed Captioning FAQ]for details.

EIA-708 specifies the transmission of CC bytes in a user data field following a picture header, inside the video elementary stream. If the driver doesn't extract CC data on its own, and the "broadcast flag" permits this, one could perhaps read video packets from the device, or a complete MPEG-2 program stream from disk, and demultiplex from there. A freestanding CC capture application would still need to tune in and choose a program ID. To complicate matters further,
EIA-708 allows both old style EIA-608-compatible closed caption data as well as the newer DTVCC.

Scott Larson writes that "stations are required to pass both EIA-608 (VBI) and EIA-708 (DTVCC) data. Why? Because If an ATSC receiver is connected to an NTSC TV (which is a likely occurance in the transition to digital broadcasting), the receiver is required to generate the old VBI Line 21 captions from the ATSC stream so the old TV will still have closed captions."

==Devices Usable With Text==
===bt8x8 devices===
Cards based on the bt8x8 chip (cf. [[bttv devices (bt848, bt878)]] have excellent text capture capability for both PAL/SECAM and NTSC.

Commandline output is provided by both ntsc-cc and the test/capture utility in zvbi.

===cx88 devices===
The latest improvements on vbi support for cx88-based cards, aside from kernel-related stuff and modules reorganization, were made by Tom Zoerner in March of 2004. The README.cx88 still says: "some code present. Doesn't crash any more, but also doesn't work yet ..."

However, Tim sketched out exactly what needs to be done in this [http://marc.theaimsgroup.com/?l=linux-video&m=108518568124567&w=2 22 May 2004 e-mail].

As of Kernel 2.6.16-r7, the cx88 driver (as tested with a pcHDTV 3000 card), captures some VBI data, which is unusable for NTSC closed captioning as only 1150 or so bytes per line of VBI data have valid values and the rest of the 2048 byte line contains unchanging garbage data. There is a [http://www.spinics.net/lists/vfl/msg26029.html patch] being discussed on the video4linux mailing list that likely solved this problem. While the feature is not documented, closed captioning on cx88 most likely works with current (2.6.19) kernels.

In the meantime, nxtvepg (which uses vbi information) is working on cx88 PAL tuners, cf. [http://nxtvepg.sourceforge.net/download.html#requirements system requirements].

The latest test with kernel 2.6.27.2, NTSC closed caption is working, with a small patch published by Rafael Diniz in a [http://marc.info/?l=linux-video&m=122469689710030&w=2 22 October 2008 email]. This patch hopefully will be applied soon.

===ivtv devices===
For details on [[Ivtv devices (cx23415, cx23416)| ivtv devices]], see the [http://ivtvdriver.org ivtv] wiki.

'''IVTV''' provides generic VBI data via a VBI Linux device. As EIA-608 closed caption data is among the VBI data, you can get it from the VBI device. '''IVTV''' provides the VBI data in two different formats -- raw and sliced. the raw mode is all of the VBI lines, with 720 luminosity samples line. The sliced format has it decoded into data bytes, with selectable VBI lines.

In addition, '''IVTV''' can embed VBI data in the MPEG stream you get from the video Linux device. It embeds it in Private Stream 1 of the MPEG stream. This is not a standard format; it is an IVTV invention. A few programs, including '''mythtv''' and '''ccextractor''' know the IVTV embedded VBI format with respect to EIA-608 closed captioning. Bryan Henderson (bryanh@giraffe-data.com) has a patch (May 2008) for Mplayer that makes it do so also.

The README.vbi in a current ivtv release has lots of details.

With a PVR-250, '''IVTV''' provides the VBI device and controls to put it in either raw mode or sliced CC. (Based on my own experimentation - Bryan Henderson).

Older '''IVTV''' (Before version 0.10) crashes when you read the VBI device if you put the device into sliced mode and you load '''IVTV''' with the autoload=0 option. Bryan Henderson (bryanh@giraffe-data.com) has a fix for this divide by zero bug.

This [http://www.gossamer-threads.com/lists/ivtv/devel/19383 exchange] on the '''IVTV''' mailing list suggests it can provide CC, VPS and WSS data with the PVR-350, but that hardware limitations prevent teletext.

Similarly, this [http://www.gossamer-threads.com/lists/ivtv/devel/16665?search_string=vbi;#16665 exchange] from January 2005 discusses an ongoing project adding vbi function for PVR-x50. Finally, in this [http://www.gossamer-threads.com/lists/ivtv/devel/19376 exchange] from April 2005, Chris Kennedy discusses vbi with pvr150/500.

In Linux v2.6.14-rc2, Mauro Carvalho Chehab submitted an "experimental Sliced VBI API support for v4l" patch, which apparently uses the hardware bit slicer in the ivtv driver. I take it this means text capture is now improved for the Hauppauge PVR150/250/350/500 cards.

===saa713x devices===
Cards based on saa713x chips (cf. [[saa713x devices]]) have excellent text capture capability under PAL/SECAM. Support for NTSC closed captioning is now available in libzvbi, including the freestanding [[Text capture#zvbi-ntsc-cc |zvbi-ntsc-cc]] from libzvbi 0.2.17, a drop-in replacement for xawtv's [[Text capture#ntsc-cc |ntsc-cc]].

The CVS version of ntsc-cc in xawtv that includes the libzvbi patch is still not released, pending some final quality tests.

==Applications==
===[[AleVT]]===
AleVT is a teletext/videotext decoder and browser for the bttv driver (/dev/vbi) and X11.

===ccextractor===

[http://ccextractor.sourceforge.net '''ccextractor'''] can extract closed captions from a variety of kinds of input streams and render the information in various forms. It understands as input DVB and IVTV format, and can produce as output SRT or SAMI (standard subtitle file formats) or raw captions in DVB format.

ccextractor is also excellent for extracting the closed captioning from DVDs and DVD images (such as the cdr images created by OSX's DiskImage utility) or ts files. The software is still in beta and the developers are active, so help them improve the application.

===[[GStreamer]]===
The application GStreamer works with closed captioning (they also mention some tweaks for Canadian English and French television); see [http://cvs.freedesktop.org/gstreamer/gst-plugins/gst/vbidec/ Freedesktop's repository].

===[[MPlayer]]===
Scott Larson has (23 September 2005) written a [http://home.pacifier.com/~scowl/eia708.patch patch] for '''mplayer''' to display EIA-708 closed captioning (e.g. from a digital TV broadcast). Specifically, the patch uses the EIA-608 compatible subformat; it cannot use the DTVCC data. See the [http://www.pchdtv.com/forum/viewtopic.php?t=986&postdays=0&postorder=asc&highlight=closed+captioning&start=0 pchdtv forum] for more information.

Bryan Henderson (bryanh@giraffe-data.com) has (May 2008) written a patch for '''mplayer''' to make it do closed captioning based on IVTV MPEG embedded VBI (EIA608) data in its MPEG input.

===mtt===
A teletext (PAL) browser with a Motif-based GUI and a console mode. In Debian, mtt is part of the motv package.

===[[MythTV]]===

MythTV's native player can display closed captions encoded into an MPEG-2 stream in the IVTV format.

===nxtvepg===
The [http://nxtvepg.sourceforge.net/index.html Nextview EPG decoder and browser] is an Electronic TV Programme Guide for the analog domain (as opposed to the various digital EPGs that come with most digital broadcasts). It allows you to decode and browse TV programme listings for most of the major networks in Germany, Austria, France and Switzerland. The EPG information is read from /dev/vbi.

===ntsc-cc===
The application ntsc-cc handles closed captioning on [[bttv devices (bt848, bt878)]] only, because it implements only the old v4l API. The saa7134 chip uses other sample rates.

For ntsc-cc to work, you typically need to be running an application for viewing or recording television, such as xawtv and mencoder. If no such application is running, ntsc-cc tends to produce garbled output.

An updated version of ntsc-cc is included in zvbi; see [[Text capture#zvbi-ntsc-cc |zvbi-ntsc-cc]] below.

===[[tvtime]]===
tvtime displays closed captioning with [[bttv devices (bt848, bt878)|bttv]] and [[saa713x devices|saa7134]] cards (also others?).

In early 2004, Kevin Ko wrote a [http://www.princeton.edu/~kko/tvtime/vbi_lock_0.2.patch patch with useful comments] to tvtime's vbidata.c; see [http://www.princeton.edu/~kko/tvtime/ his detailed account] and [https://sourceforge.net/tracker/?func=detail&atid=506989&aid=884449&group_id=64301 the tvtime bugreport].

===[http://www.linuxtv.org/vdrwiki/index.php/Introduction VDR]===
The video recording software VDR can display teletext, if extended by [http://www.linuxtv.org/vdrwiki/index.php/Osdteletext-plugin osdteletext-plugin]. The [http://www.linuxtv.org/vdrwiki/index.php/Pvrinput-plugin pvrinput-plugin] serves here as stream source to the application, delivering a MPEG TS from a [[/Ivtv_devices_(cx23415,_cx23416)|ivtv]] or [[Pvrusb2|pvrusb2]] supported analog tv card, in which the teletext data is embedded. The osdteletext plugin can also display DVB embedded teletext standalone, if delivered from an oldstyle full-featured DVB card.

===[[XdTV]]===
XdTV interacts with [[AleVT]] for Teletext and Nxtvepg for NextView.

===zapzilla===
[http://zapping.sourceforge.net Zapping] has a built-in teletext viewer called [http://zapping.sourceforge.net/cgi-bin/view/Main/Zapzilla Zapzilla].

In addition, Zapping provides subtitle overlay through the closed captioning decoder built into libzvbi.

===zvbi===
The [http://zapping.sourceforge.net/ZVBI zvbi library] offers functions to capture and decode raw VBI data. It works with all drivers using the V4L or V4L2 raw VBI API, the FreeBSD BKTR driver, Linux DVB drivers, and it can read VBI data from a VBI proxy to share V4L and V4L2 VBI devices between multiple applications. As of version 0.2.32 ATSC is also supported. I don't know if the V4L2 sliced API is supported yet (please add if you know).

Higher level functions such as to display or record Teletext and Closed Caption, or to extract network names from Teletext and XDS are also included.

The [http://zapping.sourceforge.net/cgi-bin/view/ZVBI/WebHome zvbi library] understands the European standards [http://www.etsi.org ETSI EN 300 472] "Specification for conveying ITU-R System B Teletext in DVB bitstreams" and [http://www.etsi.org ETSI EN 301 775] "Specification for the carriage of Vertical Blanking Information (VBI) data in DVB bitstreams".
The European DVB standard transmits sliced VBI data in a separate elementary stream. Current drivers in libzvbi provide full support.

It can read VBI PES packets from Linux DVB devices and extract Teletext, VPS, WSS and Caption data. A demultiplexer is available to extract VBI data from DVB MPEG-2 program streams and a multiplexer to convert sliced VBI data, e. g. captured from analog devices, to DVB format. For details see the [http://zapping.sourceforge.net/cgi-bin/view/ZVBI/Documentation zvbi documentation]. The test/capture utility in the source tarball can demonstrate these capabilities.

The zvbi library currently does not understand the American standard [http://www.atsc.org ATSC A/53] "ATSC Digital Television Standard" which also covers Closed Caption transport and the "digital" Closed Caption standard [http://global.ihs.com EIA 708-B].

Michael Schimek writes that A/53 specifies the transmission of "CC bytes in a user data field following a picture header, inside the video elementary stream. If the driver doesn't extract CC data on its own, and the "broadcast flag" permits this, one could perhaps read video packets from the device, or a complete MPEG-2 program stream from disk, and demultiplex in software. Libzvbi does something similar for DVB, so it shouldn't be hard to implement, if it hasn't been done already to extract DVD caption. A freestanding CC capture application would still need to tune in and choose a program ID; that's beyond the scope of libzvbi.

To complicate matters further A/53 may transmit old style caption EIA-608 as well as the newer "digital caption" EIA-708. I don't have enough information to properly implement EIA-708 caption overlay (nor is it useful for me until Zapping goes digital) but to write an ntsc-dtvcc it might suffice."

However, Scott Larson writes that "stations are required to pass both EIA-608 (VBI) and EIA-708 (DTVCC) data. Why? Because If an ATSC receiver is connected to an NTSC TV (which is a likely occurance in the transition to digital broadcasting), the receiver is required to generate the old VBI Line 21 captions from the ATSC stream so the old TV will still have closed captions."

==== zvbi-ntsc-cc ====
:Included in libzvbi 0.2.17 onwards (in Debian, it's it the zvbi package). Is built on and preserves the functionality of xawtv's ntsc-cc, but also handles closed captioning for cards based on saa713x chips (cf. [[saa713x devices]]).

:Unlike [[Text capture#ntsc-cc |ntsc-cc]], zvbi-ntsc-cc does not require you to run another application for viewing or recording.

==== zvbi-atsc-cc ====
:Libzvbi 0.2.32 added an improved version of zvbi-ntsc-cc which can record EIA-608 and EIA-708 caption from ATSC devices.

==Technical background==
===Displaying captured text===
To get formatted output for overlay on the television image, Michael Schimek's decoder (part of libzvbi) works like a terminal emulator, printing caption into virtual screen memory. As long as you have "pop on" style caption, streaming is easy. For "roll up" caption it needs a more character or line oriented interface. Perhaps it would suffice to call the client and clear the screen before any vertical cursor motions and scrolling.

===Testing===
Recommended applications for testing under PAL/SECAM are mtt, zapping/zapzilla and alevt/d.

For lower-level testing, use the utilities in the test/ directory of the zvbi tarball, available on [http://zapping.sourceforge.net/cgi-bin/view/ZVBI/Download#Source_Code zvbi's project page]; these are actively maintained.

The test/capture utility currently just dumps printable characters on stdout. This output needs to be "sliced". Sliced VBI is the data transmitted on each scan line. It still contains multiple logical streams, parity bits and control codes. In libzvbi "formatting" takes one stream, converts characters to Unicode and interprets control codes, giving one page of text for display. An export function would convert the text to ASCII.

You may also use test/capture utility from the zvbi library to display printable closed caption data.
capture --dump-cc

To visualize the Vertical Blanking Interval on NTSC, issue

ntsc-cc -d /dev/vbi -c -w -r 11

Both bttv and saa7134 cards show orderly signals, and cx88 (as of Kernel 2.6.16-r7) shows valid data for the first part of the line, with noise on the rest of the line.

In the zvbi test/ suite, osc similarly visualizes. The test/osc utility is more useful, since it displays which row and line are being graphed and lets you change rows with the arrow keys. NTSC closed captioning should appear on row 11, line 21.
[[Category:Development]]
[[Category:Hardware]]
[[Category:Technology]]

Cypress EZ-USB FX2

2011-10-08T13:52:27Z

Wirbel:

A High-speed 8051-based [[USB interface chipsets|USB interface chipset]] from [[Cypress Semiconductor]].

Family Variants of the EZ-USB FX2 include the CY7C68013/13A/14A/15A/16A ICs.

==External Links==
* [www.cypress .com/?id=193 CY7C680xx Product page]
* [www.cypress .com/?rID=38232 EZ-USB FX1/FX2 Technical Reference Manual]
* [http://linuxtv.org/cgi-bin/viewvc.cgi/dvb-hw/dvbusb-fx2/termini/ An example firmware for the FX2 ... plus other info in the parent directory]
* [http://sourceforge.net/projects/fx2lib/ fx2lib project]
** [https://github.com/mulicheng/fx2lib fx2lib git repo]

* [http://www.ztex.de/firmware-kit/ ZTEX EZ-USB FX2 java based SDK (Linux && Windows), dedicated for ztex boards, but may be useful]

[[Category:Chipsets]]

User talk:CityK

2011-09-30T16:25:54Z

Wirbel:

[[User:CityK|CityK]] 19:46, 3 February 2007 (CET)

Spent a bunch of time last night and this morning creating and rearranging ATSC devices stuff.
There is a LOT of work that could be done.

[[User:CityK|CityK]] 01:02, 5 February 2007 (CET)

I got to find a WYSIWYG wiki editor, else using code takes me ages

[[User:CityK|CityK]] 08:23, 7 February 2007 (CET)

made a mess of the categories tonight ... will clean that whole thing up soon.
Started with the renaming and relinking of the DVB pages ... a lot more work than I thought. Oh well, it will be nice to have a consistant look and nomenclature across the board.

Definitely several months of work to get this thing ship shape!

[[User:JGXenite|JGXenite]] 14:25, 20 April 2007 (CEST)

Hi CityK,

Sorry about that :(. I'll make my changes to Mplayer now.

[[User:JGXenite|JGXenite]] 14:56, 21 April 2007 (CEST)

No worries with the countries thing - I thought it would make more sense moving it to channels.conf, as that is the correct file name. I then decided to make a "Europe" sub-category as there were quite a few European entries. I've also contributed one for United Kingdom (Sheffield) detailing my experience with setting it up :).

[[User:Howl|howl]] 00:01, 27 July 2007 (CEST)

I like the look of the page that you purpose and also i think that this can benefit a lot for people who only want information, actual desing is more confuse.

: Thanks Howl. If you did not see the message previously, here is a (more-or-less) recent status report: http://www.linuxtv.org/pipermail/linux-dvb/2007-June/018429.html --[[User:CityK|CityK]] 07:03, 27 July 2007 (CEST)

:: I like a lot the idea and also the Nick Andrew's one in the reply of making a database. I don't know if there is a system to integrate a SQL db style like MySQL in wiki but if it exists it could be a powerful tool that will help to test different templates for the devices pages making the data independient of the style. --[[User:Howl|howl]] 01:08, 30 July 2007 (CEST)

:::I do too, but I have no idea (or time to investigate, let alone implement) about a db in a wiki ... maybe in the future --[[User:CityK|CityK]] 19:14, 30 July 2007 (CEST)

[[User:Specto|Specto]] 20:34, 2 January 2008 (GMT)

Hi CityK,

I noticed that you reverted my additions to the "How_to_install_DVB_device_drivers" page of the Linux TV Wiki.

I just wondered why you decided to do this ?

Thinking about it in more detail I realise the statements I added might well have been wrong in which case I apologise for polluting otherwise clear instructions.

I am a bit of a Linux-newbie and was finding with v4l enabled within the kernel (configured from menuconfig) and trying to use the latest v4l sources I received a large number of warnings in dmesg output (something about the kernel defining symbols which the modules did as well).
A reboot did not remove these errors.
I fixed this by disabling v4l in my kernel and rebuilding it before proceeding to the 'make install' phase.
(Drivers for my device already existed within the kernel but I need to use the newer ones which supported the remote control).

:Hi Spectro ... yes, it was just a case of being that the statements were incorrect -- what you had written shouldn't be necessary, and what is outlined in the Hg instructions is all that is required (make, make install, make unload, modprobe drivers). That said, I believe that there was an error in the driver set from last week or so -- I remember seeing a number of postings on the m/l, and also on the irc channel, about errors similar to the ones you encountered. But that's what you have to expect with the bleeding edge -- from time to time, regressions unfortunately crop up/get introduced. In any regard, I think those problems have likely been amended now. As an aside, when I rolled back the article from your edit to the previous state, I forgot to note a reason (like: "inaccurate statement" or whatever), and hence that's why a comment/explanation is missing in the article's history feature for the rollback or from the wiki's list of "recent changes" feature. --[[User:CityK|CityK]] 17:04, 4 January 2008 (CET)

[[User:Bpringlemeir|Bpringlemeir]] 06:26, 27 November 2008 (CET)

Do you have a place to put module parameters. Ie, proc/module/tuner/parameter/ntsc can be one of M,J,K setting special frequency bands for user in ???, Japan and Korea. Case doesn't matter.
:Hi Bpringlemeir ... Some parameters might already be documented in some of the articles remaining in the old V4L wiki (http://www.linuxtv.org/v4lwiki/index.php/Special:Allpages); perhaps in one of the tuner articles or in the chip interface (i.e. bt878 etc etc) articles. All these articles will be transfered into here in the near future. There are also the duplicate articles for some of the interface chipsets found here, in this wiki.

[[User:Howl|howl]] 20:52, 31 December 2008 (CET)

C'mon man, take a rest, is the last day of the year :)
: Ah, but I had! (The wiki is on Grenwich MT. I'm on -5GMT, so the edits you saw were from the day prior)

[[User:Hlangos|Hlangos]] 10:16, 7 April 2009 (CEST)

Hi there, could you remove DVB-T_USB_Devices_Table ? It doesn't add any information, and the information it duplicates from [[DVB-T_USB_Devices]] is not more readable or more accessible.
: I'll archive the page...its a shame that person elected to create a new page instead of working on the original, as they likely spent some time on it. Oh well.
:: Same goes for [[MSI_Digi_VOX_mini_II_v3.0]] . I Informed the author about [[MSI_DigiVox_mini_II_V3.0]] , asked him to add his information there and to ask one of the wiki admins to remove his new page. pity... --[[User:Hlangos|Hlangos]] 15:07, 13 April 2009 (CEST)
::: Doh! Thanks. I haven't anything from them yet. I'll see about cleaning it up soon, otherwise.--[[User:CityK|CityK]] 04:41, 17 April 2009 (CEST)

Also, you seem to have removed the DVB_USB page a while back but the Talk:DVB_USB page still exists. It only contains a redirect, but so did DVB_USB. So how about getting rid of that artifact, too?
: DVB_USB got moved to DVB_via_USB. When you use the wiki's "move" feature on an article, the old page automagically gets set up as a redirect to the new page -- similarly with the associated article Talk page. I then deleted the DVB_USB page (as I don't like to have useless redirects cluttering up the wiki's index), but obviously forgot to also delete the Talk:DVB_USB page...its gone now. --[[User:CityK|CityK]] 20:16, 12 April 2009 (CEST)
:: Thanks! BTW: Is there a way to make redirect pages invisible for the index without deleting them? They might still be useful for old links from the outside.. --[[User:Hlangos|Hlangos]] 15:07, 13 April 2009 (CEST)

[[User:Howl|howl]] 10:50, 22 September 2009 (UTC)

Good point putting the web archive page for the [[AF9005]] ;)

== [[TechniSat AirStar USB / Air2PC DVB USB]] link on [[DVB-T USB Devices]] ==

A long time ago you added this to the "supported" section:
* [[TechniSat AirStar USB / Air2PC DVB USB]]
The article itself says the device is still not working properly. Can you confirm it is supported? --[[User:Hlangos|Hlangos]] 12:37, 28 April 2009 (CEST)

:Hi Henrik, I believe that the original device did indeed work (if IIRC, Patrick added suppport for it), but I think that are a couple of different revisions (i.e. differing slightly by tuner and/or demod), and that the later revisions were problematic at some point....I really have no idea otherwise about the current support status

== Sysop status ==

Hi,

Thanks for the extra privileges! I'm pretty much finished with categories; most of the remaining pages are incomplete with regard to their interface and whether they are analogue or digital etc. Is there anything else that needs attention that I could have a look at? I've had a look at your user page and that all seems in hand.

Hope you're well

Cheers

Jim

:Hi Jim, I'm good (just very busy). Thanks again for the cat. work! A nice little project would be to implement graphical boxes for stub pages or needs expanding etc type features like wikipedia and other wikis employ. Examples:
:http://en.wikipedia.org/wiki/PCIe
:http://en.wikipedia.org/wiki/Template:Ambox
:http://en.wikipedia.org/wiki/Wikipedia:Stub
:--[[User:CityK|CityK]] 02:04, 11 May 2009 (CEST)

== Help with wiki integration ==

Hi CityK,

I've had a quiet week or so on the wiki front. I've been holding out while Henrik gets his ParserFunction project sorted out as I think it will be replicated across the site if all goes well. In the meantime, can I help with the V4L wiki integration? Just let me know if there's anything I can do.

I've also started to prepare a document showing the current structure and content of LinuxTV.org. I notice in your user page that you have given some consideration to the layout of LinuxTV.org and I think that the site as a whole could use some updating/beautification. I'll start a new page and insert the document into it or something and send you the link. Again, any thought that you have would be gratefully received.

Cheers

Jim

: Hi Jim & CityK,
: Js installed the missing extensions and I've since written a [[Template:Device_List_Low_Detail/Row|template]] for the low detail version of the device table that takes two additional arguments (selectionvalue and selectionattribute) and only displays a row if "selectionvalue" is found in "selectionattribute" of the data that is passed to it. Here are some examples of the usage: [[HLPlayground2#Row_Selections]]. I would be more happy if I had found the time to crunch the different levels of detail that currently are implemented by different templates into one template. It should be relatively easy, now that ParserFunctions are there. I just didn't have the time yet. On the other hand the code will get less and less readable if I do that. So we might as well call it "good enough". Now what needs to be done is
: a) decide which data we want to collect on the devices (this [[Template:USB_Device_Data#Syntax_and_Semantics|list]] is just my proposal)
:: I agree with most of your choices for data to collect. However, there are three areas where I can see some wrangling will be necessary.
::# The support status of the devices. Your suggestion of the status of drivers with regard to the kernel/v4l/experimental/branch/external support takes account of all the possible values at present. However, support for devices also varies according to the level of support and I think it might be prudent to indicate that in the table. As I mentioned before, there could be five different levels of support: not working, partial support for some features, support unknown, most features working or fully supported.
::: Agreed. There needs to be more detailed information on the support for different features. The data about where to find which level of support (vanilla kernel or developer VCS) can be left to the device's page. However I'd like to have one overall "supported" field. Question is: should the field contain the highest level of support available, even if that support is only available for people who compile their own kernel, or should it be the vanilla kernel support of the latest stable kernel? (I am a bit worried about the amount of work this generates.)
::# The use of machine-readable fields. I can see that this might offer the only option bearing in mind the limitations of the wiki backend. However, I wonder how likely it is that two chips will have the same part number from different manufacturers?
::: ''We'' give those names. If a conflict occurs and we need to rename an existing chip, we run a simple search and replace on the existing data and on the pages that do queries with that selectionvalue.
::# The comments field. Given that the table is meant to be a summary of the data available about various devices, is this field really necessary? I can see it being filled with fairly similar comments, which would suggest that another field would be more appropriate. In particular, I think that remote control support would dominate the comments and the addition of a field for remote control status (perhaps using the five-level system I proposed above with the addition of a 'not applicable' value for devices without remotes) might be a good idea. Any informatiive comments beyond this are surely the realm of a device page?
::: Agreed.
: b) to decide on the details that go into the different versions of the table and where to deploy which version (the stuff on [[HLPlayground2#first_scale_try]] is just my first idea) and
::As we discussed before, users can be split into three broad categories depending on their level of tech-savvy. However, their reason for looking on the wiki could be for:
::#Pre-purchase information about devices and support.
::#Post-purchase information about devices and support.
::#Technical background on DTV.
::#Programming information for drivers
::#Programming information for software
::and probably others (please add to this list!!).
::: When talking about the data on devices, we can skip the programmers and concentrate on the less tech-savvy users. They will always be the majority.
::I suppose that the most immediately useful page would be a page of fully supported devices, regardless of the method by which support is offered. This could eventually include devices from all architectures and would fulfil the criteria of 1. above. I think this would probably be the most visited page on the site.
:::Agreed and it can be easily done. Take a look at the "tuner : mt2060 or vendor : TerraTec" table at [[HLPlayground2#Low_Detail_Table_2]]. You can combine data from different sources as long as it arrives in table rows with the right number and order of table cells. This way you don't need to throw all devices into one "database" article. You can keep USB DVB-T devices separate of PCIe DVB-S devices and of PCI Analog-TV devices.
: c) add the data of at least all the devices that are in [[DVB-T_USB_Devices|the old article]] into [[Template:USB_Device_Data|the "database"]].
: cheers -henrik --[[User:Hlangos|Hlangos]] 11:18, 11 June 2009 (UTC)
: PS: Is it a lot of work to set up another mailinglist? One for the linuxtv wiki? (linux-media or linux-dvb are way too noisy) It would help to coordinate and keep people informed without the need to subscribe to those high volume lists.
:: I concur with this idea. I can see that an extra mailing list might well be the way to go.
:: Once again, fine work Henrik. Please let me know what you think of my comments.
:: Cheers
::Jim
::: Maybe we should hijack the linux-media mailing list and flood it with our talk of reoganizing the wiki until ''they'' offer to make a mailinglist for us :-)

== Files to delete ==

Hi CityK, there are two image files that aren't needed anymore and can be deleted.

--[[User:Howl|howl]] 00:40, 1 October 2009 (UTC)

== New Software to watch Digital TV ==

Hi, I took a look at the history and it looks like you're one of the main contributors to the page [[TV_Related_Software]] Now, I am the author of a new software to watch digital television on linux, it's open source and it's name is Antenna DTV, website: [http://antenna-dtv.sf.net Antenna DTV]. It's a new project which focuses on the signal, and not only to watching tv alone. Might I add it to the list of software to watch digital tv? Thanks! Any question is welcome!

::But of course, feel free -- it is, after all, a community wiki ! You could create an article page for the app too --[[User:CityK|CityK]] 07:42, 9 January 2011 (UTC)

:::: Did it. Hope it fits well. :) [[User:Antoniop|Antoniop]] 22:39, 18 January 2011 (UTC)

== Spam users in the pipe ==

Hi there,
I just noticed that we have recently gained a lot of new users with names that seem to indicate German language spam.

These are the Users and the translation of their names:

[[User:Abnehmen]] (lose weight)
[[User:Anbieterstrom]] (supplier electricity)
[[User:Energie]] (energy)
[[User:Firtenlernen]] (learning to flirt)
[[User:Forexanbieter]] (forex supplier)
[[User:Gastarife]] (gas rates)
[[User:Gasvergleich]] (gas comparison)
[[User:Lottozahlen]] (lottery numbers)
[[User:Naturstrom]] (nature electricity)
[[User:Oekostrom]] (eco electricity)
[[User:Preisvergleichstrom]] (price comparison electricity)
[[User:Strombilliger]] (electricity cheaper)
[[User:Strompreise]] (electricity prices)
[[User:Vergleichstrom]] (comparison electricity)
[[User:Versorgerstrom]] (supplier electricity)

I'd go ahead and simply block those users but I can't figure out why they havn't been used to spam the wiki yet.
Do we have a policy in place that enforces email address verification before allowing edits?

BTW: it would have been easier to find those users if the user table could be sorted by creation date but "Sort by creation date" yields the following error on [[Special:ListUsers]]

A database query syntax error has occurred. This may indicate a bug in the software. The last attempted database query was:

(SQL query hidden)

from within function "IndexPager::reallyDoQuery (UsersPager)". Database returned error "1176: Key 'PRIMARY' doesn't exist in table 'user' (localhost)".

cheers
--[[User:Hlangos|Hlangos]] 19:34, 29 September 2011 (CEST)

: None of those users did actually do spamming yet. So there's no reason to block them so far. --[[User:Wirbel|wirbel]] 19:51, 29 September 2011 (CEST)

: The SQL error should be fixed now. --[[User:Js|js]] 00:32, 30 September 2011 (CEST)

: I hadn't really noticed the German language spam, but that is pretty funny (given the translations, the names that are being used). About a month or so ago, I noticed that the new user spambot pattern seemed to be an English_name-prefix_followed_by_number (e.g. george1107). Anyway, I was thinking that perhaps we should deploy a reCaptcha (http://www.mediawiki.org/wiki/Extension:ReCAPTCHA) for our user registration, though I don't know how useful it would be. I note that the thinkpads forum ( http://www.thinkpads.com/forum/) has one of the more elaborate registrations that I've encountered in attempts to ward off spam... With the point being that spam still gets through--[[User:CityK|CityK]] 04:07, 30 September 2011 (CEST)

:: @wirbel: True, and if it was a single user I wouldn't even have noticed, but 15 users that just happen to have similarly spamy names?
::: It really looks like preparations/tests for spam, agree. But as users in this wiki can freely choose their login name to whatever they want and no spamming happened so far, i just wanted to remind, that blocking users should be taken into account only if they actively destroy something. reCaptcha or similar is a good idea anyway. --[[User:Wirbel|wirbel]] 18:25, 30 September 2011 (CEST)

:: @js: Thanks! Works like a charm now!

:: @CityK: The translations are literal. ''Most'' of the names are perfectly OK in German. You can stick word together like "chicken" and "soup" to make "chickensoup" (a soup with chicken) or "soupchicken" (a chicken destined for ending up in a soup). Some of the user names however don't ''work''. E.g. ''Stromanbieter'' is a common word for your electricity supplier while ''Anbieterstrom'' would describe the electricity that comes from a supplier, and doesn't make much sense. I was a big fan of recaptcha, before they were bought by that one big company that is giving M$ a run for its money in the evil empire contest. Nowadays their privacy policy reads like a joke:
We log information related to reCAPTCHA, such as the Internet Protocol address of the end-user,
an identifier for the implementing site, the URL of the site accessed,
the CAPTCHA solution, the result of the CAPTCHA grading, the date and time of requests,
and one or more cookies that may uniquely identify the end-user browser.
In our logs, we will delete any information that identifies the individual URLs
within the implementing site within 30 days of the event logged.
:: The cookies are particularly evil as they allow them to follow your surfing habit across every site that happens to show a recaptcha. (You don't even have to solve that captcha. Just downloading the captcha image will tell them which page you have been looking at, from which IP at which time and so on...
:: There are [http://www.sitepoint.com/captcha-problems-alternatives/ alternatives] to recaptcha but we also need to consider what we spend our time on, and if recaptcha is available and installable here without much fuzz, Using recaptcha may be ok for the sign-on process but I'd rather not have it pop up every now and then. cheers --[[User:Hlangos|Hlangos]] 12:18, 30 September 2011 (CEST)

User talk:CityK

2011-09-29T17:51:21Z

Wirbel:

DigitalRise DTV PCI Cab CI

2011-08-20T10:03:13Z

Wirbel: /* Making it Work */

[[Image:dr_black_web320.jpg|right|thumb|200px|DigitalRise logo]]

A [[DVB-C]] [[DVB-C_PCI_Cards|PCI card]] from [[DigitalRise]].

==Overview/Features==

* PCI interface
* Inputs: Antenna (Digital), Remote
* Outputs: Antenna
* CI Module

===Components Used===
* NXP/Philips TDA10023 (demodulator)
* Mantis (bridge)

===Other Images===
<gallery perrow=5>
Image:ad-cp400_box.jpg|DigitalRise AD-CP400 Box
</gallery>

===Identification===
<code>lspci -vnn</code> 
# lspci -vvvnn
00:0f.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
Subsystem: Twinhan Technology Co. Ltd Device [1822:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cddff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis

==Making it Work==
As can be seen above the card can be used with the Mantis kernel driver.

Linux ubuntu 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 i686 GNU/Linux

List of kernel modules involved:
Module Size Used by
mantis 18436 0
tda665x 3676 1 mantis
lnbp21 2652 1 mantis
mb86a16 20284 1 mantis
stb6100 7040 1 mantis
tda10021 6592 1 mantis
tda10023 6684 1 mantis
zl10353 7460 1 mantis
stb0899 32704 1 mantis
stv0299 9860 1 mantis
mantis_core 32988 1 mantis
ir_common 48092 1 mantis_core
ir_core 7560 2 mantis_core,ir_common
dvb_core 91112 2 stv0299,mantis_core

===Firmware===
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''

===Drivers===
''Provide the details of where the drivers and patches and necessary tools are available.''

===Sample Kernel Output===
''Provide the '''relevant''' portion of dmesg here. For example:'' 
# dmesg
[ 1930.935923] Mantis 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 1930.937095] DVB: registering new adapter (Mantis DVB adapter)
[ 1931.818068] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...

===Remote Control Support===
''Discuss support for the remote control here.''

==External Links==
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:'' 
* [http://www.digitalrise.eu/products/dvb_tuner/cab/2040/ DigitalRise DTV PCI Cab CI product page]

[[Category:DVB-C_PCI_Cards]]

DigitalRise DTV PCI Cab CI

2011-08-20T10:02:36Z

Wirbel: /* Identification */

[[Image:dr_black_web320.jpg|right|thumb|200px|DigitalRise logo]]

A [[DVB-C]] [[DVB-C_PCI_Cards|PCI card]] from [[DigitalRise]].

==Overview/Features==

* PCI interface
* Inputs: Antenna (Digital), Remote
* Outputs: Antenna
* CI Module

===Components Used===
* NXP/Philips TDA10023 (demodulator)
* Mantis (bridge)

===Other Images===
<gallery perrow=5>
Image:ad-cp400_box.jpg|DigitalRise AD-CP400 Box
</gallery>

===Identification===
<code>lspci -vnn</code> 
# lspci -vvvnn
00:0f.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
Subsystem: Twinhan Technology Co. Ltd Device [1822:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cddff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis

==Making it Work==
''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''
As can be seen above the card can be used with the Mantis kernel driver.

Linux ubuntu 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 i686 GNU/Linux

List of kernel modules involved:
Module Size Used by
mantis 18436 0
tda665x 3676 1 mantis
lnbp21 2652 1 mantis
mb86a16 20284 1 mantis
stb6100 7040 1 mantis
tda10021 6592 1 mantis
tda10023 6684 1 mantis
zl10353 7460 1 mantis
stb0899 32704 1 mantis
stv0299 9860 1 mantis
mantis_core 32988 1 mantis
ir_common 48092 1 mantis_core
ir_core 7560 2 mantis_core,ir_common
dvb_core 91112 2 stv0299,mantis_core

===Firmware===
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''

===Drivers===
''Provide the details of where the drivers and patches and necessary tools are available.''

===Sample Kernel Output===
''Provide the '''relevant''' portion of dmesg here. For example:'' 
# dmesg
[ 1930.935923] Mantis 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 1930.937095] DVB: registering new adapter (Mantis DVB adapter)
[ 1931.818068] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...

===Remote Control Support===
''Discuss support for the remote control here.''

==External Links==
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:'' 
* [http://www.digitalrise.eu/products/dvb_tuner/cab/2040/ DigitalRise DTV PCI Cab CI product page]

[[Category:DVB-C_PCI_Cards]]

DigitalRise DTV PCI Cab CI

2011-08-20T10:00:12Z

Wirbel:

[[Image:dr_black_web320.jpg|right|thumb|200px|DigitalRise logo]]

A [[DVB-C]] [[DVB-C_PCI_Cards|PCI card]] from [[DigitalRise]].

==Overview/Features==

* PCI interface
* Inputs: Antenna (Digital), Remote
* Outputs: Antenna
* CI Module

===Components Used===
* NXP/Philips TDA10023 (demodulator)
* Mantis (bridge)

===Other Images===
<gallery perrow=5>
Image:ad-cp400_box.jpg|DigitalRise AD-CP400 Box
</gallery>

===Identification===
''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:'' 
# lspci -vvvnn
00:0f.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
Subsystem: Twinhan Technology Co. Ltd Device [1822:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cddff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis

==Making it Work==
''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''
As can be seen above the card can be used with the Mantis kernel driver.

Linux ubuntu 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 i686 GNU/Linux

List of kernel modules involved:
Module Size Used by
mantis 18436 0
tda665x 3676 1 mantis
lnbp21 2652 1 mantis
mb86a16 20284 1 mantis
stb6100 7040 1 mantis
tda10021 6592 1 mantis
tda10023 6684 1 mantis
zl10353 7460 1 mantis
stb0899 32704 1 mantis
stv0299 9860 1 mantis
mantis_core 32988 1 mantis
ir_common 48092 1 mantis_core
ir_core 7560 2 mantis_core,ir_common
dvb_core 91112 2 stv0299,mantis_core

===Firmware===
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''

===Drivers===
''Provide the details of where the drivers and patches and necessary tools are available.''

===Sample Kernel Output===
''Provide the '''relevant''' portion of dmesg here. For example:'' 
# dmesg
[ 1930.935923] Mantis 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 1930.937095] DVB: registering new adapter (Mantis DVB adapter)
[ 1931.818068] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...

===Remote Control Support===
''Discuss support for the remote control here.''

==External Links==
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:'' 
* [http://www.digitalrise.eu/products/dvb_tuner/cab/2040/ DigitalRise DTV PCI Cab CI product page]

[[Category:DVB-C_PCI_Cards]]

TV Related Software

2011-07-09T08:14:59Z

Wirbel: correcting to *Alphabetical* listing

Here, we aim to provide useful information about software applications that are directly related to or which are generally useful in some respect to the reception and manipulation of TV signals on Linux based computer systems.

In order to be most useful for the reader, this page is divided into three sections:
* An Alphabetical Overview Listing
* A Categorized section for software useful for DVB TV cards (for both [[Full-featured Card|full featured]] and [[budget]] cards, as this distinction doesn't make a difference for most of the software)
* A Categorized section for software useful for analog TV cards

{{Note|''If you're new to this aspect of computing, rather than trying single programs one after another, you might be more interested in how to quickly get a fully working system as described in the "[[Example setups]]" page. Or perhaps instead you may simply want to perform some quick tests on your system, such as like those outlined in the "[[Testing your DVB device]]" article.''}} 

= An Alphabetical Overview Listing =

{| class="wikitable sortable"
|+'''A Overview of Software Applications which are useful in regards to TV on a Linux based Computer System'''
|-
! Software Application !! Supports Analogue !! Supports DVB !! Recording Capabilities !! Offline Playback !! Editing Capabilities !! Channel storage !! Language !! class="unsortable"| Comments
|-
| [[alevt]] || y || y || || || || || || Program to use Teletext/Videotext on analog and digital TV
|-
| [[Antenna DTV]] || n || y || y || n || n || t channels.conf format || Python || Watch, record and monitor signal level of digital TV
|-
| [[dvbd]] || || y || || || || || C++ || Traditional UNIX daemon for DVB
|-
| [[dvbice]] || n || y || y || || || || C || Recompress and stream audio and video to Icecast/HTTP in Theora/Vorbis
|-
| [[dvbsak]] || n || y || || || || || ||
|-
| [[dvbshout]] || n || y || || || || || || Stream radio to Icecast/multicast
|-
| [[dvbsnoop]] || n || y || || || || || C ||
|-
| [[dvbstream]] || n || y || y || n || n || || || a streaming utilitity. Part of the [[DVB tools]] project
|-
| [[DVBStreamer]] || n || y || || || || sqlite, XMLTV format || C || PSI/SI tracking and correctly streams all PIDs including PCR
|-
| [[dvbyell]] || n || y || n || n || n || || || A DVB streaming service.
|-
| [[gdvb]] || || || || || || || ||
|-
| [[GeeXboX]] || || || || || || || ||
|-
| [[getstream]] || n || y || || || || || ||
|-
| [[GStreamer]] || n || y || || || || || ||
|-
| [[Gv4l]] || || || || || || || || A GUI frontend for [[Transcode]]'s V4L functions
|-
| [[Kaffeine]] || n || y || y || y || n || own text format || C++ || Desktop TV Solution
|-
| [[KaxTV]] || || || || || || || || obsoleted
|-
| [[Klear]] || || y || || || || || ||
|-
| [[LinuxTV dvb-apps]] || n || y || y || ? || ? || {a,c,t,s} channels.conf formats|| C || contains dvbscan, {a,c,t,s}zap ...
|-
| [[MEncoder]] || y || y || y || n || y || || C || encoding suite of tools
|-
| [[Me TV]] || n || y || y || n || n || SQLite || C++ || GNOME based DVB TV viewer
|-
| [[Mini DVB Linux]] || || y || || || || || || Distribution with live-CD
|-
| [[MPlayer]] || y || y || y || y || n || channels.conf || C || multi-functional media player
|-
| [[mumudvb]] || n || y || n || n || n || || || Stream multiples channels in multicast (each channel in different group)
|-
| [[MythTV]] || y || y || y || y || y || mysql || C++ || Media Center
|-
| [[pluto]] || || || || || || || ||
|-
| [[ProjectX]] || || || || || || || ||
|-
| [[RedButton]] || || || || || || || || [[MHEG-5]] engine
|-
| [[scan-s2]] || n || y || n || n || n || || C || frequency scanning utility which supports DVB APIv5 (for DVB-S2)
|-
| [[Home Theater System | showtime]] || || || || || || || C || OpenGL-based media player
|-
| [[szap-s2]] || || y || y || || || || C || tuning utility which supports DVB APIv5 (for DVB-S2)
|-
| [[tv_grab_dvb]] || || y || || || || [[XMLTV]] format || C || dumps DVB [[EPG]] info in [[XMLTV]] format
|-
| [[Home Theater System | HTS Tvheadend]] || y || y || y || y || y || [[XMLTV]] format || C || TV streaming server
|-
| [[VDR]] || y * || y || y || y || y || VDR format channels.conf || C++ || analogue with plugins only DVB APIv5 since 1.7.2
|-
| [[VLC media player]] || || || || || || || ||
|-
| [[w_scan]] || n || y || n || n || n || VDR channels.conf kaffeine zap/xine tuning data for scan|| C || ATSC/DVB-C/S/S2/T frequency scanner
|-
| [[xawtv]] || y || y * || y || y || n || || || * only v4 supports DVB
|-
| [[XdTV]] || y || y || y || || || || || TV viewing app. Development stopped
|-
| [[xine]] || || y || y || y || || || || multi-functional media player
|-
| [[ZapDvb]] || || || || || || || ||

|}

= Categorized software for use with Digital (DVB) TV cards =
* [[How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers|V4L-DVB Device Drivers]]

==DVB Utility Suites and Standalone Tools==

* Suites
** [[LinuxTV dvb-apps]]
** [[DVB tools]]
** [[dvbsak]]
** [[ZapDvb]]
** [[dvbd]]

* Show Videotext/Teletext/Interactive Content
** [[alevt]]
** [[RedButton]]

* [[EPG |Electronic Program Guide ]] / EIT tools
** atsc_epg - included within the [[LinuxTV dvb-apps]]
** [[tv_grab_dvb]]
** [[dvbsnoop]]
** [[DVBStreamer]]
** LoadEPG [http://lukkinosat.altervista.org/]
** MediaHighWay EPG, mhwepg [http://jrepetto.free.fr/] [http://www.linuxtv.org/vdrwiki/index.php/Mhwepg]
** tv_grab_dvb_plus ( was tvgrabeit ) [http://sourceforge.net/projects/tvgrabeit/]
** [[XMLTV]]

* Tools for performing [[Frequency scan|frequency scans]]
** [[scan]]
** [[dvbscan|dvbscan/scandvb/atscscan]]
** [[w_scan]]
** [[scan-s2]]
** [[scte65scan]] [http://www.mythtv.org/wiki/Scte65scan] [http://forums.sagetv.com/forums/showthread.php?t=45474] [http://scte65scan.sourceforge.net/]

* Tools for signal strength
** [[femon]]

* Tools for tuning
** [[zap|{a,s,c,t}zap]]
** [[dvbsnoop]]
** [[szap-s2]]

* Tools for unattended/headless recording
** [[dvbsched]] (in [[dvbd]])
** [[dvbrecord]] (in [[dvbsak]])
** [[atscap]]
** [[DvbCronRecordingPlugin]] for Trac

* [[JustDvb-It]] [http://www.cineca.tv/labs/mhplab/JustDVb-It%202.0.html] - a suite/set of tools useful for DVB stream creation and manipulation, especially for interactive digital television (i.e. [[MHP|DVB-MHP]])

*Network Tools for DVB Streams
** [[dvbshout]]
** [[dvbsnoop]]
** [[dvbstream]]
** [[DVBStreamer]]
** [[dvbyell]]
** [[getstream]]
** [[Me TV]]
** [[mumudvb]]
** [[TVheadend]] [http://www.lonelycoder.com/hts/tvheadend_overview.html]

==Streaming Software for Digital TV ==
* [[dvbice]]
* [[VLC media player]]

==Standalone Software to Watch Digital TV ==
* [[Antenna DTV]]
* [[gdvb]]
* [[Kaffeine]]
** [[KaxTV]]
* [[Klear]]
* [[Me TV]]
* [[MPlayer]]
** [[SMPlayer]]
* [[VLC media player]]
* [[xawtv]] ... version 4 only for DVB
* [[XdTV]]
* [[Xine]]
** [[gxine]]

==Media Center Software==
* [[Elisa]] [http://elisa.fluendo.com/]
* [[Entertainer Project]] [http://www.entertainer-project.com/features.php]
* [[Freevo]]
* [[GeeXboX]]
* [[Home Theater System]]
** showtime (OpenGL-based media player)
** tvheadend (TV streaming server)
* [[LinuxMCE]] [http://www.linuxmce.com/] Linux media center - A forked project from [[pluto]]
* [[Morphine.TV]] [http://wiki.morphine.tv/tiki-custom_home.php]
* [[My Media System]] [http://mymediasystem.org/]
* [[MythTV]]
* [[Mini DVB Linux]] ??
* [[oxine]] [http://oxine.sourceforge.net/]
* [[pluto]]
* [[Rage]] [http://www.rasterman.com/index.php?page=News (see the Monday, 27 March 2006 entry)]
* [[SageTV]] [http://sagetv.com/linuxOEMedition.html]
* [[VDR]] - VDR is one of the most popular TV applications. It features watching TV, recording storage on disk, EPG, Dolby Digital, playback, multi language and much more. VDR, although originally written for FF cards, works also with budget cards, if one installs the [[VDR Software Decoder Plugin]].
* XBMC [http://xbmc.org/]
* [[Yahdr]] Yet another HardDiskRecorder - not really it's a GUI-less server application to stream or record the TS. It will scan DVB-T or DVB-C for programs, so you don't have to use ancient scanning tools. EPG (schedule, now/next, what's on at X) is usable, provided it's re-read every now and then ;-) For user interaction a HTTP interface is used, so (almost) every Browser will serve as Interface..., oh yeah :-P watch what you requested by pointing mplayer/Xine/whatever at your server ;-/ [http://www.spitzner.org/yahdr.html Yahdr homepage] - sorry, no binaries -
...

===Media Center Distributions===
Complete operating systems tailored for easy installation of everything required to have a media centre.
* [[iMedia MythTV Linux]] [http://www.mini-box.com/iMediaMythTV]
* Knoppmyth
* [[LinVDR]] [http://www.linvdr.org/projects/linvdr/index.en.php] -- this was a Linux distro based around VDR. Now ancient history
* [[MiniMyth]] [http://linpvr.org/minimyth/]
* Mythbuntu
* MythDora
...

==Media Players==
i.e. for offline playback of captured material:
* [[Kaffeine]]
* [[KMPlayer]]
* [[MPlayer]]
* [[SMPlayer]] [http://smplayer.sourceforge.net/]
* [[Totem]]
* [[VLC media player]]
* [[Xine]]
...

==Tools for Editing ==
* [[Avidemux2]]
* [[dvbcut]]
* [[ProjectX]]
* [[MEncoder]]
....

= Categorized software for use with Analogue TV cards =
* [[How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers|V4L-DVB Device Drivers]]

==Analogue Utility Suites or Standalone Tools==
* [[v4l2-apps]]
* [[v4l2ucp]]
* [[xawtv]]

==Standalone Software to Watch Analogue TV==
* [[fftv]] [http://fftv.sourceforge.net/]
* [[Gnometv]] [http://gnometv.sourceforge.net/]
* [[Gv4l]] [http://gv4l.sourceforge.net/]
* [[kdetv]] (also formerly known as [[QtVision]], the rewrite of the former [[KWinTV]])
* [[LinTV]]
* [[MPlayer]]
** [[SMPlayer]]
* [[tvtime]] [http://tvtime.sourceforge.net/]
* [[TV-Viewer]] (for Hardware MPEG2 Encoder cards)
* [[xawtv]]
** [[MoTV]]
* [[XdTV]]
* [[Zapping]] [http://zapping.sourceforge.net/Zapping/index.html] - a TV viewer for the Gnome desktop.

* [[Streamer]]
* [[DVR]] [http://www.pierrox.net/dvr/]
* [[WebVCR+]] [http://webvcrplus.sourceforge.net/index.html]

==Analogue Streaming Utilities==
* [[Streaming-V4L]]
* [[GStreamer]]

==Analogue Frame Grabbing Utilities==
* http://tldp.org/HOWTO/Webcam-HOWTO/framegrabbers.html
* VideoDog [http://linux.softpedia.com/get/Multimedia/Video/VideoDog-9261.shtml] [http://linux.die.net/man/1/videodog]

[[Category:Software]]

W scan

2011-07-02T11:45:18Z

Wirbel:

{{lowercase|w_scan}}

''w_scan'' is a small command line utility used to perform [[Frequency scan|frequency scan]]s for [[DVB]] and [[ATSC]] transmissions. It is not included in [[LinuxTV dvb-apps]], but complements the two [[Frequency scan|frequency scanning]] utilities available through [[LinuxTV dvb-apps]], [[Dvbscan|dvbscan]] and [[Scan|scan]].

''w_scan'' is capable of directly creating channels.conf files as well as initial tuning data for [[Scan|scan]].

==Obtaining w_scan==
''w_scan'' can be obtained [http://wirbel.htpc-forum.de/w_scan/index2.html here].

==Documentation==
Detailed information can be found in the ''w_scan'' man page (i.e. from a console, run <code>man w_scan</code>). Additionally, running ''w_scan'' with the -h parameter will produce an output that provides a summary of it's main command line options.
<pre>w_scan [options...] >> channels.conf</pre>

In general, when using ''w_scan'' you should at least specify three parameters: frontend type, country/satellite and output format. The following table summarizes the basic command line essentials for using ''w_scan''.

{| class="wikitable"
|+'''Basic w_scan commandline parameters and their respective options'''
|-
! Parameter !! Argument !! Description & Options

|-
| '''Frontend Type'''
| -f''Type''
|
a = ATSC (North America, cable and terrestrial) 
c = DVB-C (Europe, cable) 
s = DVB-S/S2 (Satellite) 
t = DVB-T (Europe, terrestrial = default) 

NOTE:
* ATSC support requires a w_scan version >= 20080815
* Satellite support requires a w_scan version >= 20090504)

|-
| '''ATSC Type'''
| -A''Type''
|
(ignored for DVB-C and DVB-T) 
1 = VSB ("Over-the-Air)" 
2 = QAM annex B ("cable TV") 
3 = both of them

|-
|'''Country ID'''
| -c''ID''
|
(mandatory for ATSC, DVB-C, DVB-T) 
uppercase two character identifier as defined in ISO 3166-1, 
(DE,FR,GB,US,FI,...) 
see -c? for list of countries.

|-
| '''Satellite ID'''
| -s''ID''
|
(mandatory for DVB-S/S2) 
uppercase character constant with E (east) or W (west) as separator, 
(S19E2,S13E0,S0W8,...) 
see -s? for list of satellites.

|-
| '''Output Format'''
| -''Format''
|
X = czap/tzap/xine channels.conf 
x = "initial tuning data" for [[Scan]] 
G = Gstreamer dvbsrc Plugin 
k = channels.dvb for [[Kaffeine]] 
L = VLC xspf playlist (experimental) 
M = mplayer format, similar to X 
If the output format is not specified, w_scan defaults to create [http://www.tvdr.de/ VDR-1.6 channels.conf].
|-
| '''VDR version'''
| -o''N''
|
6 = vdr-1.6.x 
7 = vdr-1.7.3 or higher
|-
| '''Help Level'''
| -''Level''
|
h = basic help 
H = extended help for expert functionality

|}

Some working examples, cobbled together from the basics given in the above table, are provided below. Note: ''Experts'' or ''experienced users'' may use some of the other ''w_scan'' options available, but this is not recommended. (For example, w_scan searches ''/dev/dvb/adapterX/frontendY'' for DVB/ATSC cards matching to option "-f", therefore specifying the adapter "-a XX" is not recommended.)

==Examples==
{{Note|As mentioned in the above table:
* ATSC support requires a w_scan version <nowiki> >= </nowiki> 20080815
* ATSC support was integrated in vdr-1.7.14, VDR output needs '-o 7'
* DVB-S/S2 support requires a w_scan version <nowiki> >= </nowiki> 20090504 }}

===Scanning ATSC VSB (United States, Over-the-Air)===
$ w_scan -fa -A1 -c US -X
===Scanning ATSC QAM annex B (United States, digital cable TV)===
$ w_scan -fa -A2 -c US -X
===Scanning DVB-T (Germany, Over-the-Air, VDR output)===
$ w_scan -ft -c DE
===Scanning DVB-C (Germany, digital cable TV, Kaffeine channels.dvb)===
$ w_scan -fc -c DE -k
===Scanning DVB-S/S2 (Astra 19.2east, vdr-1.7.x)===
$ w_scan -fs -s S19E2 -o 7
===Scanning DVB-S (Thor 0.8west, vdr-1.3.x .. vdr-1.6.x)===
$ w_scan -fs -s S0W8
===Scanning DVB-S (Hotbird, vdr-1.7, 4-port DiSeqC switch, hotbird at port 3)===
$ w_scan -o 7 -fs -s S13E0 -D2c
Note: ports are counting from '0'.

===Generating dvbscan tuning data===
Exactly as above, just specify output format dvbscan with "-x":
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -x >''cc-Ttttt''

If you choose to create an initial scan file (and you know the name of your local transmitter or cable provider), you can send the resulting file to the [http://linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dvb mailing list] after checking that it hasn't already been posted or added to the [http://linuxtv.org/hg/dvb-apps/file/tip/util/scan/ scan directory in the dvb-apps repository].

===Generating c/s/tzap tuning data===
Exactly as above, just specify output format zap/czap/xine with "-X" (uppercase X):
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -X >''cc-Ttttt''

===Defining output charset===
$ w_scan -f <FRONTEND_TYPE> -C <CHARSET> ...
Use 'iconv --list' for a list of possible output charsets, usually something like 'utf-8', 'iso8859-15'.
Needs 20110410 or higher.

==Also See==
* [[Frequency_scan#Comparison_of_DVB_frequency_scanning_commandline_utilities|Comparison of the scanning utilities]].
* man w_scan
* [[scan]]
* [[dvbscan]]

==External Links==
* [http://wirbel.htpc-forum.de/w_scan/index2.html Homepage (de)]
* [http://wirbel.htpc-forum.de/w_scan/index_en.html Homepage (en)]
* [http://edafe.org/vdr/w_scan/ English howto by edafe]

[[Category:Apps & Utilities]]

Main Page

2011-06-30T16:36:44Z

Wirbel: Undo revision 29240 by Loveservice (Talk)

__NOTOC__
__NOEDITSECTION__

<div style="background-color:#6289AB; padding:0.3em; color:#ffffff; font-weight:bold; font-size:150%; text-align:center">
Welcome to the linuxtv.org V4L-DVB Wiki !
</div>
{|valign=top background=none
|valign=top|
<div style="vertical-align:top; margin:0; border:1px solid #6289AB; padding:0.5em; background-color:#ffffff">

This wiki is intended to become an authoritative source of information regarding the use of analog video and digital TV sources under Linux -- i.e. the subject matters covered under the V4L-DVB framework. The basic plan is to aggregate information about: available hardware; how v4l or dvb work; software used with the hardware and so forth.
Like all other wikis, the V4L-DVB wiki relies upon the contributions of its users. Hence, it will only be as useful as we make it! So we encourage you to share your knowledge and help with the task of turning this site into a grand repository of knowledge. Your input (whether it be by providing a set of instructions for how to get a certain device working; a minor improvement to an existing article; or an explanation for some complex concept) will be highly appreciated.

-- [[LinuxTVWiki:People|The LinuxTV V4L-DVB wiki team]] / [[People behind V4L-DVB]]

</div>
|}

<div style="vertical-align:top; margin:0; border:1px solid #6289AB; padding:0.5em; background-color:#ffffff">
{|valign=top cellpadding=0 cellspacing=5 width=100%
| valign=top | [[Image:News_icon2.png|50px]]
| '''GENERAL NEWS:''' 
'''Free at Last, Free at Last: A Final Fairwell to V4L1 ... And Just What the Heck is xf86-video-v4l Anyway ?''' 
Upon release of the forthcoming 2.6.38 kernel, all but a very few vestiges of the antiquated V4L1 API will have been removed forever in favour of its successor, the V4L2 API (which, itself, now resides within the larger [[Development: Linux Media Infrastructure API|Linux Media Infrastructure API]]).

One of the more obvious ramifications of this significant change is ... ''[[News Archive|cont'd here]]'' -- 03:43, 13 February 2011 (UTC)

'''Introducing the "Media_build" System:''' 
If you hadn't noticed, over the course of the past year, there has been some monumental changes in the revision control systems employed for V4L-DVB development. These changes have had an impact not only upon developers, but also on end users seeking to use the latest drivers set ... ''[[News Archive|cont'd here]]'' --09:22, 9 January 2011 (UTC)
|-
| || align=right| ''For older news items see [[News Archive|here]]
|}
</div>

{| style="border: solid 1px; border-color:#6289AB; margin: oem; background-color: #6289AB;" cellspacing=5 cellpadding=1 width="100%"
| valign=top |

{| cellspacing=0 cellpadding=5 border=0 width="100%"

| valign=top | [[Image:index.png|50px]]
| valign=top | '''[[Special:Allpages|The Wiki's Indexes]]''' Article, category, image, ....
| valign=top ; style="background-color:#FFFFCC;" | [[Image:User_Info_icon.png|50px]]
| valign=top ; style="background-color:#FFFFCC;" | '''[[User Information]]''' How to install drivers for your hardware, and software to use with your device, ...
| valign=top ; style="background-color:#F5DEB3;" | [[Image:Technical_background_icon.png|50px]]
| valign=top ; style="background-color:#F5DEB3;" | '''[[Technical Background]]''' Technical details on standards and hardware components/chipsets, etc
|-
|-
|-

| valign=top | [[Image:More_info.png|50px|]]
| valign=top | '''[[Other Sources of Info]]''' Mailing lists, #irc channels....
| valign=top ; style="background-color:#FFFFCC;" | [[Image:Hardware_icon.png|50px]]
| valign=top ; style="background-color:#FFFFCC;" | '''[[Hardware Device Information]]''' Information on hardware devices
| valign=top ; style="background-color:#F5DEB3;" | [[Image:Developer_icon.png|50px]]
| valign=top ; style="background-color:#F5DEB3;" | '''[[Developer Section]]''' Information to help device driver development
|-
|-
|-

|}
|}

<div style="margin:0; border:1px solid #6289AB; padding:0.5em; background-color:#F7F9FB;">
{|valign=top cellpadding=0 cellspacing=0 width=100%
|valign=top bgcolor=#F7F9FB width=32%|
=='''The Wiki - How Can I Help?'''==
* [[Help:Contents|Everything you need to know about editing wiki pages but were afraid to ask]]
** [http://www.mediawiki.org/wiki/Help:Moving_a_page Help: Renaming/Moving a Page]
* [[Wiki - Help Wanted List|A list of things that need to be tackled]]
* [[Wiki - New Device Copy & Paste Template|New Device Copy & Paste Template]]

|valign=top bgcolor=#F7F9FB width=4%|
|valign=top bgcolor=#F7F9FB width=32%|

|}
</div>

[[Category:LinuxTV]]

Help:Contents

2011-06-30T16:36:31Z

Wirbel: Undo revision 29241 by Loveservice (Talk)

* [[LinuxTVWiki:About|About LinuxTVWiki]] - Introduction
==User Quickstart==
* [[LinuxTVWiki:First steps|First steps]] - Information for newbies
* [[LinuxTVWiki:Second steps|Second steps]] - Where to start and common mistakes of beginners
* [[LinuxTVWiki:The wiki markup|The wiki markup]] - Editing help
** [[LinuxTVWiki:Links|Links]] - Help on links
** [[LinuxTVWiki:Images|Images]] - Help on images
** [http://sql.uleth.ca/dmorgwiki/index.php/Help:Editing Quick editing help]
==Authoritative Sources of Information for Users==
* [http://www.mediawiki.org/wiki/MediaWiki MediaWiki homepage] - Provides a great set of documentation for users
** [http://meta.wikimedia.org/wiki/Help:Contents WikiMedia's "MediaWiki Handbook"] - Another extensive reference source for wiki's based on "Mediawiki"
** [http://en.wikipedia.org/wiki/Help:Contents Wikipedia's Help Contents]

[[Category:Help]]

Talk:Main Page

2011-05-26T16:12:54Z

Wirbel: Undo revision 29131 by Aillyok (Talk)

== main page hacked ==

Main Page was "hacked" by a stupid guy: http://www.linuxtv.org/wiki/index.php?title=Main_Page&oldid=11512
someone should consider taking some actions towards his account.

I would like to say something to that guy:
do you really think you are an hacker just because you changed the main page of a wiki that can be edited by whoever wants?

If you just sit down and think you will realize the real hackers here are all those coders here behind who hack inside closed devices and manage to free them through a gpl driver written from scratch.

Instead of abusing open source communities where nobody has got the power because everybody does have the power (for istance I registered just in order to change back the homepage, exactly as you did to destroy it), focus your efforts on big evil corporations websites: there you can fight against a webadmin and maybe eventually win, but never would you win over a linux community, it's simply too big (and does not code for money)!

== Categories articles organization ==

I just added some trivial categories to the ISDB-T devices pages, but, I have a little trouble. Watching the existing scheme in another standard, for example DVB-T, we can find categories like "DVB-T PCI Cards" in the same name page, but in the "DVB-T PCie Cards" we have the "PCIe" category. There are anything "official" about the procedures of Categories? --[[User:Howl|howl]] 01:15, 1 October 2009 (UTC)

W scan

2011-04-10T16:31:22Z

Wirbel: /* Defining output charset */

{{lowercase|w_scan}}

''w_scan'' is a small command line utility used to perform [[Frequency scan|frequency scan]]s for [[DVB]] and [[ATSC]] transmissions. It is not included in [[LinuxTV dvb-apps]], but complements the two [[Frequency scan|frequency scanning]] utilities available through [[LinuxTV dvb-apps]], [[Dvbscan|dvbscan]] and [[Scan|scan]].

''w_scan'' is capable of directly creating channels.conf files as well as initial tuning data for [[Scan|scan]].

==Obtaining w_scan==
''w_scan'' can be obtained [http://wirbel.htpc-forum.de/w_scan/index2.html here].

==Documentation==
Detailed information can be found in the ''w_scan'' man page (i.e. from a console, run <code>man w_scan</code>). Additionally, running ''w_scan'' with the -h parameter will produce an output that provides a summary of it's main command line options.
<pre>w_scan [options...] >> channels.conf</pre>

In general, when using ''w_scan'' you should at least specify three parameters: frontend type, country/satellite and output format. The following table summarizes the basic command line essentials for using ''w_scan''.

{| class="wikitable"
|+'''Basic w_scan commandline parameters and their respective options'''
|-
! Parameter !! Argument !! Description & Options

|-
| '''Frontend Type'''
| -f''Type''
|
a = ATSC (North America, cable and terrestrial) 
c = DVB-C (Europe, cable) 
s = DVB-S/S2 (Satellite) 
t = DVB-T (Europe, terrestrial = default) 

NOTE:
* ATSC support requires a w_scan version >= 20080815
* Satellite support requires a w_scan version >= 20090504)

|-
| '''ATSC Type'''
| -A''Type''
|
(ignored for DVB-C and DVB-T) 
1 = VSB ("Over-the-Air)" 
2 = QAM annex B ("cable TV") 
3 = both of them

|-
|'''Country ID'''
| -c''ID''
|
(mandatory for ATSC, DVB-C, DVB-T) 
uppercase two character identifier as defined in ISO 3166-1, 
(DE,FR,GB,US,FI,...) 
see -c? for list of countries.

|-
| '''Satellite ID'''
| -s''ID''
|
(mandatory for DVB-S/S2) 
uppercase character constant with E (east) or W (west) as separator, 
(S19E2,S13E0,S0W8,...) 
see -s? for list of satellites.

|-
| '''Output Format'''
| -''Format''
|
X = czap/tzap/xine channels.conf 
x = "initial tuning data" for [[Scan]] 
k = channels.dvb for [[Kaffeine]] 
If the output format is not specified, w_scan defaults to create [http://www.tvdr.de/ VDR-1.6 channels.conf].

|-
| '''Help Level'''
| -''Level''
|
h = basic help 
H = extended help for expert functionality

|}

Some working examples, cobbled together from the basics given in the above table, are provided below. Note: ''Experts'' or ''experienced users'' may use some of the other ''w_scan'' options available, but this is not recommended. (For example, w_scan searches ''/dev/dvb/adapterX/frontendY'' for DVB/ATSC cards matching to option "-f", therefore specifying the adapter "-a XX" is not recommended.)

==Examples==
{{Note|As mentioned in the above table:
* ATSC support requires a w_scan version <nowiki> >= </nowiki> 20080815
* ATSC support was integrated in vdr-1.7.14, VDR output needs '-o 7'
* DVB-S/S2 support requires a w_scan version <nowiki> >= </nowiki> 20090504 }}

===Scanning ATSC VSB (United States, Over-the-Air)===
$ w_scan -fa -A1 -c US -X
===Scanning ATSC QAM annex B (United States, digital cable TV)===
$ w_scan -fa -A2 -c US -X
===Scanning DVB-T (Germany, Over-the-Air, VDR output)===
$ w_scan -ft -c DE
===Scanning DVB-C (Germany, digital cable TV, Kaffeine channels.dvb)===
$ w_scan -fc -c DE -k
===Scanning DVB-S/S2 (Astra 19.2east, vdr-1.7.x)===
$ w_scan -fs -s S19E2 -o 7
===Scanning DVB-S (Thor 0.8west, vdr-1.3.x .. vdr-1.6.x)===
$ w_scan -fs -s S0W8
===Scanning DVB-S (Hotbird, vdr-1.7, 4-port DiSeqC switch, hotbird at port 3)===
$ w_scan -o 7 -fs -s S13E0 -D2c
Note: ports are counting from '0'.

===Generating dvbscan tuning data===
Exactly as above, just specify output format dvbscan with "-x":
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -x >''cc-Ttttt''

If you choose to create an initial scan file (and you know the name of your local transmitter or cable provider), you can send the resulting file to the [http://linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dvb mailing list] after checking that it hasn't already been posted or added to the [http://linuxtv.org/hg/dvb-apps/file/tip/util/scan/ scan directory in the dvb-apps repository].

===Generating c/s/tzap tuning data===
Exactly as above, just specify output format zap/czap/xine with "-X" (uppercase X):
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -X >''cc-Ttttt''

===Defining output charset===
$ w_scan -f <FRONTEND_TYPE> -C <CHARSET> ...
Use 'iconv --list' for a list of possible output charsets, usually something like 'utf-8', 'iso8859-15'.
Needs 20110410 or higher.

==Also See==
* [[Frequency_scan#Comparison_of_DVB_frequency_scanning_commandline_utilities|Comparison of the scanning utilities]].
* man w_scan
* [[scan]]
* [[dvbscan]]

==External Links==
* [http://wirbel.htpc-forum.de/w_scan/index2.html Homepage (de)]
* [http://wirbel.htpc-forum.de/w_scan/index_en.html Homepage (en)]
* [http://edafe.org/vdr/w_scan/ English howto by edafe]

[[Category:Apps & Utilities]]

W scan

2011-04-10T16:30:48Z

Wirbel: add new option -C, move link to 'comparison of freq scan utils' to 'Also see'.

{{lowercase|w_scan}}

''w_scan'' is a small command line utility used to perform [[Frequency scan|frequency scan]]s for [[DVB]] and [[ATSC]] transmissions. It is not included in [[LinuxTV dvb-apps]], but complements the two [[Frequency scan|frequency scanning]] utilities available through [[LinuxTV dvb-apps]], [[Dvbscan|dvbscan]] and [[Scan|scan]].

''w_scan'' is capable of directly creating channels.conf files as well as initial tuning data for [[Scan|scan]].

==Obtaining w_scan==
''w_scan'' can be obtained [http://wirbel.htpc-forum.de/w_scan/index2.html here].

==Documentation==
Detailed information can be found in the ''w_scan'' man page (i.e. from a console, run <code>man w_scan</code>). Additionally, running ''w_scan'' with the -h parameter will produce an output that provides a summary of it's main command line options.
<pre>w_scan [options...] >> channels.conf</pre>

In general, when using ''w_scan'' you should at least specify three parameters: frontend type, country/satellite and output format. The following table summarizes the basic command line essentials for using ''w_scan''.

{| class="wikitable"
|+'''Basic w_scan commandline parameters and their respective options'''
|-
! Parameter !! Argument !! Description & Options

|-
| '''Frontend Type'''
| -f''Type''
|
a = ATSC (North America, cable and terrestrial) 
c = DVB-C (Europe, cable) 
s = DVB-S/S2 (Satellite) 
t = DVB-T (Europe, terrestrial = default) 

NOTE:
* ATSC support requires a w_scan version >= 20080815
* Satellite support requires a w_scan version >= 20090504)

|-
| '''ATSC Type'''
| -A''Type''
|
(ignored for DVB-C and DVB-T) 
1 = VSB ("Over-the-Air)" 
2 = QAM annex B ("cable TV") 
3 = both of them

|-
|'''Country ID'''
| -c''ID''
|
(mandatory for ATSC, DVB-C, DVB-T) 
uppercase two character identifier as defined in ISO 3166-1, 
(DE,FR,GB,US,FI,...) 
see -c? for list of countries.

|-
| '''Satellite ID'''
| -s''ID''
|
(mandatory for DVB-S/S2) 
uppercase character constant with E (east) or W (west) as separator, 
(S19E2,S13E0,S0W8,...) 
see -s? for list of satellites.

|-
| '''Output Format'''
| -''Format''
|
X = czap/tzap/xine channels.conf 
x = "initial tuning data" for [[Scan]] 
k = channels.dvb for [[Kaffeine]] 
If the output format is not specified, w_scan defaults to create [http://www.tvdr.de/ VDR-1.6 channels.conf].

|-
| '''Help Level'''
| -''Level''
|
h = basic help 
H = extended help for expert functionality

|}

Some working examples, cobbled together from the basics given in the above table, are provided below. Note: ''Experts'' or ''experienced users'' may use some of the other ''w_scan'' options available, but this is not recommended. (For example, w_scan searches ''/dev/dvb/adapterX/frontendY'' for DVB/ATSC cards matching to option "-f", therefore specifying the adapter "-a XX" is not recommended.)

==Examples==
{{Note|As mentioned in the above table:
* ATSC support requires a w_scan version <nowiki> >= </nowiki> 20080815
* ATSC support was integrated in vdr-1.7.14, VDR output needs '-o 7'
* DVB-S/S2 support requires a w_scan version <nowiki> >= </nowiki> 20090504 }}

===Scanning ATSC VSB (United States, Over-the-Air)===
$ w_scan -fa -A1 -c US -X
===Scanning ATSC QAM annex B (United States, digital cable TV)===
$ w_scan -fa -A2 -c US -X
===Scanning DVB-T (Germany, Over-the-Air, VDR output)===
$ w_scan -ft -c DE
===Scanning DVB-C (Germany, digital cable TV, Kaffeine channels.dvb)===
$ w_scan -fc -c DE -k
===Scanning DVB-S/S2 (Astra 19.2east, vdr-1.7.x)===
$ w_scan -fs -s S19E2 -o 7
===Scanning DVB-S (Thor 0.8west, vdr-1.3.x .. vdr-1.6.x)===
$ w_scan -fs -s S0W8
===Scanning DVB-S (Hotbird, vdr-1.7, 4-port DiSeqC switch, hotbird at port 3)===
$ w_scan -o 7 -fs -s S13E0 -D2c
Note: ports are counting from '0'.

===Generating dvbscan tuning data===
Exactly as above, just specify output format dvbscan with "-x":
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -x >''cc-Ttttt''

If you choose to create an initial scan file (and you know the name of your local transmitter or cable provider), you can send the resulting file to the [http://linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dvb mailing list] after checking that it hasn't already been posted or added to the [http://linuxtv.org/hg/dvb-apps/file/tip/util/scan/ scan directory in the dvb-apps repository].

===Generating c/s/tzap tuning data===
Exactly as above, just specify output format zap/czap/xine with "-X" (uppercase X):
$ w_scan -f <FRONTEND_TYPE> {-c <COUNTRY>,-s <SATELLITE>} -X >''cc-Ttttt''

===Defining output charset===
$ w_scan -f <FRONTEND_TYPE> -C <CHARSET> ...
Use 'iconv --list' for a list of possible output charsets, ususally something like 'utf-8', 'iso8859-15'.
Needs 20110410 or higher.

==Also See==
* [[Frequency_scan#Comparison_of_DVB_frequency_scanning_commandline_utilities|Comparison of the scanning utilities]].
* man w_scan
* [[scan]]
* [[dvbscan]]

==External Links==
* [http://wirbel.htpc-forum.de/w_scan/index2.html Homepage (de)]
* [http://wirbel.htpc-forum.de/w_scan/index_en.html Homepage (en)]
* [http://edafe.org/vdr/w_scan/ English howto by edafe]

[[Category:Apps & Utilities]]

Twinhan VP-1020A

2011-03-25T12:30:51Z

Wirbel: Undo revision 28909 by Grace0909 (Talk)

[[Image:Vp-1020A.jpg|thumb|250px|VP-1020A]]
[[Image:Vp-1020A-ASIC.jpg|thumb|250px|VP-1020A ASIC ... Identify your card model]]
A (so called) "[[Budget]]" [[DVB-S]] [[DVB-S_PCI_Cards|PCI card]] by [[TwinHan]]. This card is well suppported by the LinuxTV drivers.

==Overview/Features==
Effectively, the VP-1020A is the oldest card design in the DVB-S family from TwinHan -- although it was preceeded by the VP-1020 model, the only differences between itself and the older VP-1020 are the color of the board (PCB) and the firmware contained in the onboard ASIC.

<pre>("DST-03T") (dst)
features: Card is capable of delivering the full unmodified TS stream to userspace.
interface: PCI
PCI device id: 14f1:8804
PCI subsystem id: 1822:0001
Bridge: bt8xx
card driver: dvb-bt8xx
frontend: LG
frontend driver: dst

Notes:
* The actual card type is determined by interrogating the onboard EEPROM.
* The frontend on these cards is hidden behind an ASIC -- the tuner component initialization routines are held
in the ASIC in the form of firmware (not reloadable through software). So there is no need to know the full
details of the frontend, and, consequently, the only frontend driver for this card is the dst module.
</pre>

Required modules and parameters: 
Uses the bttv driver.

<pre>
dvb_core dvb_shutdown_timeout=0
bttv i2c_hw=1 card=0x71
bt878
dst
dvb-bt8xx</pre>
Loading just dvb-bt8xx will normally autodetect the card and load all the above modules with the required parameters. See the following section for one potential problem area.

==Kernel Hangup Problems with the TwinHan 1020A / bttv Driver ==
This card derives it's PCI subsystem ID from the value contained in the EEPROM. Unfortunately, for some reason (or cheapness on TwinHan's part) the EEPROM is not write protected, and, consequently, due to some other unknown reasons (such as maybe a buggy driver or something other?) portions of the EEPROM may become corrupted/overwritten.

So, if your kernel freezes at startup with the following last messages:
<pre>bttv0: subsystem: fefe:0001 (UNKNOWN)
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]</pre>
it most likely means that your card's EEPROM has become corrupted. The ''fefe:0001'' value reported is an unknown ID, which causes the bttv driver to hang. The good news, however, is that with the EEPROM being writable, this also means that one can fix the problem relatively easily....''relatively''.
 
====The Catch-22 Situation====
* With the card installed, during boot up, the bttv driver is loaded and it performs an [[I²C Protocol|I²C]] probe of the EEPROM, where upon the unknown ID is encountered and which causes the driver to freeze. If bttv never probed, you wouldn't end up with a hung kernel.
* In order to correct the root of that problem (an incorrect value in the EEPROM) you will need to have the card installed and be able to write to its EEPROM chip via [[I²C Protocol|I²C]]
* However, problematic to the solution is that the card actually doesn't contain a vanilla [[I²C Protocol|I²C]] bus. Instead, [[I²C Protocol|I²C]] probing is performed in conjunction with PIO signals, and it is the bttv driver that provides such functioning.

And there lies the catch-22 situation: you can't boot with the card installed because of bttv, but you can't proceed to fix the problem without first booting with the card installed and having bttv loaded

There are several ways for getting around this conundrum, and although the difference between these methods is simply in the level of each's procedural complexity, they all effectively provide the same outcome. Which method you choose is entirely up to you -- the obvious route to take is that which you are most comfortable with in performing. In very brief/rough description, here are a few ways:
* uninstall the card; boot; fix modprobe.conf with the bttv card=113 option so as to force that identification rather then relying upon autodetection; shutdown; reinstall card; reboot; if that works, follow the steps listed below in the next section
* uninstall the card; boot; rename bttv module (i.e. bttv.ko to bttv.bak) to suppress its loading during bootup; shutdown; reinstall card; reboot; cp bttv.bak bttv.ko; modprobe bttv card=113; if that works, follow the steps listed below in the next section
* boot from a liveCD (or an OS installation disk, and while loading its setup, get to a console via Ctrl + Fn); then mount the filesystem on your hdd and make the necessary changes via either the first two methods outlined listed just above; reboot; if that works, follow the steps listed below in the next section ... this method avoids the necessity of having to do the physical removal and re-installation steps of the card and some of the requisite reboots, though newcomers will likely not be familiar with the command line steps required to successfully carry out the procedure.

====Steps For Fixing A Corrupted EEPROM:====

{{Note|The original authour of the article wrote a warning that "to fix the EEPROM, it is IMPORTANT that you load all modules for your 1020 card ''except'' dvb-bt8xx." This may not be entirely necessary. But what should be clear from the discussion above, you most certainly will need to have the bttv module reloaded after first having booted with the card installed and the bttv module disabled/surpressed somehow}}

'''1. Obtain the I²C Tools for Linux''' 
You will need the "i2c*" programs from '''[http://www.lm-sensors.org/wiki/I2CTools I²C Tools for Linux]''' (formerly included directly within lm-sensors) -- some Linux distros may have these utilities already installed, otherwise you will have to obtain and install them yourself. After installation, make sure the i2c-dev module, which the i2c* utilities rely upon, is loaded -- you can check via opening a command console and running:
lsmod | grep i2c
If i2c-dev is not contained within the output, then load the driver now via:
modprobe i2c_dev

'''2. Determine your card's I²C Bus''' 
List all the installed [[I²C Protocol|I²C]] buses on your system by opening a command terminal and running:
i2cdetect -l
Remember, as described in the "Catch-22" section above, your card does not have a regular [[I²C Protocol|I²C]] bus, so unless the bttv driver is loaded, i2cdetect will not find/report one for the card. These steps assume that you have already resolved the catch-22 delemma, and as such, having bttv loaded, you would obtain output from i2cdetect similar to that shown in the example below:
Installed I2C busses:
i2c-1 unknown bt878 #0 [hw] Algorithm unavailable
i2c-0 unknown SMBus PIIX4 adapter at e800 Algorithm unavailable

From the i2cdetect output that is generated in your own case, determine which bus relates to your 1020 card -- the first column in the list will show i2c-''BUS'', where ''BUS'' is an integer representing a particular installed bus in your system. From here on, whenever ''BUS'' is written in these instructions, substitute it with the correct integer that represents the bus that you just determined is for your card. As can be seen, in the example above this would correspond to i2c-1.

'''3. Obtain a contents dump from your card's EEPROM''' 
{{Note|This step can be dangerous if the ''BUS'' used is wrong, but usually it is safe.}}
The next step is to run:
i2cdetect ''BUS''
The above command should result in the output of a map of available address spaces detected on that ''BUS''. The 1020 card normally has only one active chip at address 0x50. For example:
<pre> i2cdetect 1

WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] y

0 1 2 3 4 5 6 7 8 9 a b c d e f
00: XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
50: 50 XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX
</pre>

If your output seems right, then try to dump the EEPROM's contents with:
i2cdump ''BUS'' 0x50

For example:
<pre> i2cdump 1 0x50

No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1, address 0x50, mode byte
Continue? [Y/n] y

0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 f0 00 dc 00 10 00 38 ff ff ff ff ff ff ff ff .?.?.?.8........
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: 00 ff ff ff ff ff ff 20 ff 00 00 ff ff ff ff ff ....... ........
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: ff ff ff ff ff ff ff ff fe f9 00 00 00 01 fe fe ........??...???
</pre>

From the output of the EEPROM contests dump, you will find that the (incorrect) subsystem ID will reside in the last 4 bytes -- make sure it matches the one that your system prints just before the system hang (i.e. if your system message shows the incorrect ''fefe:0001'', that means the last 4 bytes from the EEPROM dump should be ''00 01 fe fe'' ). If you do not see the incorrect ID there, or nothing resides at address 0x50, '''stop here''' and heed this following warning:

{{Note|The commands which follow in step 4 will write to the EEPROM chip. This means that:
* you should be '''absolutely sure''' that the EEPROM contents dump that you're looking at is from your 1020 card -- i.e make sure you're NOT looking at that from another piece of hardware, as the write operation may damage the respective hardware irreparably !!
* even if you are looking at the EEPROM contents dump from your 1020 card, and even though the chances of mishap are then very small, there are still '''NO GUARANTEES''' that the write operation won't damage the 1020 card irreparably -- just as when you write a new BIOS to a motherboard, or a new firmware to a optical disc burner, or whatever the case, there is always an element of risk involved. In the event of any negative consequences, as borne out of your actions in face of such risk, you alone bear the entire responsibility}}

Now, with that said, a 1020 card exhibiting the hanging symptoms described above, but whose EEPROM dump doesn't have the expected incorrect ID at 0x50, is still essentially a very small step away from becoming a doorstop, so you might as well go ahead anyway and perform the following steps which write to the card.

'''4. Write the correct ID value to your card's EEPROM''' 
To put the correct ID of ''1822:0001'' at address 0x50 (i.e. the EEPROM on your 1020 card), run the following commands:
i2cset -y ''BUS'' 0x50 0xfc 0x00 b
i2cset -y ''BUS'' 0x50 0xfd 0x01 b
i2cset -y ''BUS'' 0x50 0xfe 0x18 b
i2cset -y ''BUS'' 0x50 0xff 0x22 b
Note, each of these commands will complain with a "Warning - readback failed", but the write operations should work nonetheless.

'''5. Check for success''' 
Cross-check that you successfully overwrote the EEPROM with the correct ID by way of another EEPROM contents dump:
i2cdump -y ''BUS'' 0x50

If all looks correct, then once the bttv module is loaded again (e.g. at the next reboot, or via unloading the modules from memory and then reloading them), it should now detect your card correctly. The same goes for the dvb-bt8xx module.

[[Category:DVB-S PCI Cards]]

TerraTec Cinergy T USB RC

2011-01-05T17:36:12Z

Wirbel:

{{Device_List_Medium_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Medium_Detail/Row
|selatt1=did
|selval1=terratec-trc-mk2
}}
}}

=== Version 2 AF9015 ===
USB ID: 0ccd:0097
Manufacturer: NEWMI

Uses tuner NXP TDA18218 and AF9015A. Use Kernel-2.6.37 or v4l-dvb git.

After loading dvb-usb-af9015 you should see the following:
<pre>
usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
</pre>

[[Category: DVB-T USB Devices]]

Template:USB Device Data

2011-01-05T17:32:13Z

Wirbel: /* terratec-trc-mk2 */

<noinclude>

== Introduction to this page ==

The data contained in this template is slowly replacing the collection of tables in the [[DVB-T_USB Devices]] article.

The main purpose is to collect the available information on devices that now is scattered around on device/chipset/driver pages, and at the same time make it accessible from all those places.
Having a "single copy" will hopefully ease updating information on devices and drivers.

Keeping the information in one place of course means that there will be lots of details that most users don't care about.
Using some minor template voodoo, it is possible to select a limited subset of data fields and thus construct tables with a small subset of columns.
Go to [[Template:List of Device List Templates]] for a starting point and [[HLPlayground2]] for examples.

With the help of the ParserFunctions/StringFunctions extension it is possible to select a subsets of the datasets for other purposes.
E.g. The devices that use a certain tuner or the devices by a certain vendor.
Some examples are currently shown on [[HLPlayground2]] and [[HLPlayground2/doubleselection]].

{{note|If you edit the data below, you may have to outsmart your browser-cache and the rendering cache of the wiki. Otherwise your changes will not appear in the table renderings. }}
{{note|Do yourself a favor and make sure you have enabled ''section editing'' in your preferences. The whole page is currently 78 kbyte and it will break the 100kb limit pretty soon. }}

There's a helper page to for editors [[DVB-T_USB_Devices_ListData/Helper]] that shows all devices.

== Usage Examples on device pages ==

Low detail:
<pre>
{{Device_List_Low_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Low_Detail/Row
|selatt1=did
|selval1=msi-digivox-mini-ii-v3
}}
}}
</pre>

As you can see ''did'' is set as selection attribute and ''msi-digivox-mini-ii-v3'' as selection value.

If you want to show some more detail you can exchange ''Low'' for ''Medium'' in '''both''' template names. The ''/Header'' and ''/Row'' template.

<pre>
{{Device_List_Medium_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Medium_Detail/Row
|selatt1=did
|selval1=msi-digivox-mini-ii-v3
}}
}}
</pre>

There is also a set of templates for ''Full'' details if you want to get the fields that are ment for filtering only, like the ''did'' field itself.

== Syntax and Semantics ==

Here is a cut'n paste template for new devices. (Don't forget use the same ''XYZ'' in all three places.)
<pre>
</includeonly><noinclude>
==== XYZ ====
{{DeviceDisplayMedium|XYZ}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=XYZ
| vendor=
| device=
| standard=
| supported=
| pic=
| url=
| hostinterface=
| usbid=
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</pre>

{| class="wikitable"
| ''did'' || a device ID that makes it possible to render just this one device in a table and to jump directly to the device on this page. As matching in the selection templates is done on substrings you need to make sure that the did's are unique and disjoint.
|-
| ''vendor'' || the device manufacturer/vendor. E.g. Hauppauge
|-
| ''standard'' || the broadcasting standard or standards that the devce supports E.g. Possible values would be the analog encodings "ANALOG-PAL" "ANALOG-NTSC" "ANALOG-SECAM" as well as digital encodings "DVB-T" "DVB-C" "DVB-C2" "DVB-S" "DVB-S2" "DVB-H" "DVB-SH" "ATSC" "ATSC-M/H" "ISDB-S" "ISDB-T" "1seg" "ISDB-C" "SBTVD/ISDB-Tb" "DMB-T/H" "ADTB-T" "CMMB" "DMB-T" "T-DMB" "S-DMB" "MediaFLO". Even "FM-RADIO" and "AM-RADIO" could be included in this list.
|-
| ''device'' || the device name. E.g. '''Cinergy XXS''' This is also the place to put a link to a device page.
|-
| ''supported'' || support status.
<pre> {{yes}} or {{no}} </pre>
if there is no further detail but I'd prefer something like
<pre> {{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}} </pre>
if supported by vanilla kernel since version 2.6.25 (the entry will be linked to the kernel source repository)
<pre> {{Supported in HG|since=2009-01-31}} </pre>
for support in main line mercurial repository
<pre> {{Supported in HG Branch|since=2009-01-31|branchurl=http://linuxtv.org/hg/~anttip/af9015/}} </pre>
for support in certain branch
<pre> {{Supported in External|since=2009-01-31|url=http://mcentral.de/wiki/index.php5/Em2880}} </pre>
for support somewhere else
|-
| ''pic'' || preferably an image uploaded to the wiki (using 120px width). Like this: <pre>[[image:Dvb-t-usb-msi-digivox-ii-rev3-001.jpg|120px]]</pre>Links to (not embedding of) external pictures are OK in a pinch, but those might disappear any time as some vendors only keep the current devices on their page and every older Device vanishes. Please, please, please, if you own a device that doesn't have a picture yet, take one and upload it. Even a blurry picture taken with a mobile phone camera is better than nothing. However, do not upload pictures that you downloaded from a vendor page without asking for permission to use it here. Taking a picture of a device that you own is the better choice and other users will greatly benefit from it.
|-
| ''url'' || link to the manufacturers/vendors page for that device. but also links to linux user experience pages, forum articles or mailing list achives regarding this device.
|-
| ''hostinterface'' || interface supported. E.g. "USB1.1" and "USB2.0" but also "ISA" "PCI32" "PCI64" "PCI-X" "PCIe" "PCCARD" "CardBus" "ExpressCard" "IEEE1394"
|-
| ''hw'' || summary of the hardware (human readable). this will hold the old data during transition and also allow to add hw related information beyond tuner, demodulator and usb bridge.
|-
| ''usbid'' || usb id. 4 hex digits, colon, 4 hex digits. lower case. e.g. <tt>12ba:f001</tt> preferably only add the "cold" id. The one shown before firmware upload. The warm id should go the the device's page.
|-
|
* ''tuner''
* ''demodulator''
* ''usbbridge''
| machine readable component names for implementing filters based on this. E.g. af9015, vt7045, mt2060
|-
| ''fw'' || firmware name. link?
|-
| ''comment'' || human readable comments. if those comments stretch several lines, it is time to make a device page. :-)
|}

== Data ==
Click on Edit to see the data.
</noinclude><includeonly>

</includeonly><noinclude>
=== unsupported devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== pctv-nanostick-t2-290e ====
{{DeviceDisplayMedium|pctv-nanostick-t2-290e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pctv-nanostick-t2-290e
| vendor=PCTV Systems
| device=nanoStick T2 290e
| standard=DVB-T, DVB-T2
| supported={{no}}
| pic=[[Image:PCTV_nanoStick_T2_290e_PCB_em28xx_demod.jpg|120px]]
| url=[http://www.pctvsystems.com/Products/ProductsEuropeAsia/Digitalproducts/PCTVnanoStickT2/tabid/248/language/en-GB/Default.aspx]
| hostinterface=USB2.0
| usbid=2013:024f
| hw=Empia [[Em28xx_devices|em28xx]] / Sony CXD2820R / NXP TDA18271
| tuner=tda18271
| demodulator=cxd2820r
| usbbridge=em28xx
| fw=N/A
| comment=First DVB-T2 capable receiver. Development is [http://www.stevekerrison.com/290e/index.html active] but slow moving; help welcomed.
}}

</includeonly><noinclude>

==== conceptronic-ctvdigdual-v2 ====
{{DeviceDisplayMedium|conceptronic-ctvdigdual-v2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=conceptronic-ctvdigdual-v2
| vendor=Conceptronic
| device=Digital Dual TV Receiver CTVDIGDUAL_V2
| standard=DVB-T
| supported={{no}}
| pic=
| url=[http://www.conceptronic.net/Site/desktopdefault.aspx?tabindex=1&tabid=242&cid=40&gid=4050&pid=CTVDIGDUAL_V2]
| hostinterface=USB2.0
| usbid=1b80:e410
| hw=Afatech/ITETech IT9135
| tuner=it9135
| demodulator=it9135
| usbbridge=it9135
| fw=
| comment=Dual tuner. Tested with kernel 2.6.34
}}

</includeonly><noinclude>

==== agk-10314 ====
{{DeviceDisplayMedium|agk-10314}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=agk-10314
| vendor=Agk
| device=10314
| standard=DVB-T
| supported={{no}}
| pic=
| url=[http://www.mail-archive.com/linux-media@vger.kernel.org/msg16480.html]
| hostinterface=USB2.0
| usbid=1d19:1103
| hw=Realtek rtl2832u
| tuner=rtl2832u
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>

==== artec-atsc-t14a ====
{{DeviceDisplayMedium|artec-atsc-t14a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-atsc-t14a
| vendor=[[Artec]]
| device=[[Artec T14A|T14A]]
| standard=ATSC
| supported={{no}}
| pic=
| url=[http://www.linuxtv.org/pipermail/linux-dvb/2007-February/016134.html]
| hostinterface=USB2.0
| usbid=05d8:810d
| hw=Microtune MT2060, LG DT3303, Cypress FX2 (CY7C68013)
| tuner=mt2060
| demodulator=dt3303
| usbbridge=cypressfx2
| fw=
| comment=warm id 05d8:810e
}}

</includeonly><noinclude>
==== tvisto-dvbusb-white ====
{{DeviceDisplayMedium|tvisto-dvbusb-white}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tvisto-dvbusb-white
| vendor=TVISTO
| device=[[TVISTO_DVB-T_USB|TVT-DVBTUSB]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:Tvisto_USB_DVB-T_15a4-9016.png|120px]]
| url=
| hostinterface=USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015|Afatech AF9015]], [[Microtune_MT2060|Microtune MT2060]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Is a GeniaTech T328B rebranded.
}}

</includeonly><noinclude>
==== tvisto-dvbusb-ec168 ====
{{DeviceDisplayMedium|tvisto-dvbusb-ec168}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tvisto-dvbusb-ec168
| vendor=TVISTO
| device=[[TVISTO_DVB-T_USB|TVT-DVBTUSB]]
| standard=DVB-T
| supported=???
| pic=[[Image:Tvisto_USB_DVB-T_15a4-9016.png|120px]]
| url=
| hostinterface=USB2.0
| usbid=18b4:fffa
| hw=[[MXL5003S]], [[E3C EC168]]
| tuner=mxl5003s
| demodulator=ec168
| usbbridge=ec168
| fw=
| comment=It has [[MXL5003S]] and a [[E3C EC168]] X***98501T" (I couldn't read all numbers, they were deleted). In reverse (inside in the circuit) It has "4407 ver 2.0"
}}

</includeonly><noinclude>

=== avermedia a8xx series ===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-a800 ====
{{DeviceDisplayMedium|avermedia-a800}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a800
| vendor=[[AVerMedia]]
| device=AVerTV DVB-T USB 2.0 A800
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13|file=drivers/media/dvb/dvb-usb/a800.c}}
| pic=
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=163&tab=APDriver]
| hostinterface=USB1.1 USB2.0
| usbid=07ca:a800
| hw=[[DiBcom DiB3000|DiBcom 3000P]] dvb-usb-a800.ko
| tuner=
| demodulator=dib3000m
| usbbridge=
| fw=dvb-usb-avertv-a800-02.fw
| comment=Remote control handling is different to the one used in the other DiBusb clones and many essential keys do not work at all (with X.org and linux kernels 2.6.17 and 2.6.18). warm id: 07ca:a801
}}

</includeonly><noinclude>

==== avermedia-a835 ====
{{DeviceDisplayMedium|avermedia-a835}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a835
| vendor=[[AVerMedia]]
| device=AVerTV Volar HD A835
| standard=DVB-T
| supported={{no}}
| pic=[http://www.avermedia.com/avertv/Upload/ProductImages/140/Box-A8351.jpg]
| url=[http://www.avermedia.com/avertv/product/ProductDetail.aspx?Id=508]
| hostinterface=USB2.0
| usbid=07ca:b835
| hw=[[Afatech AF9035|AF 9035]]
| tuner=
| demodulator=af9035
| usbbridge=af9035
| fw=
| comment=tried with linux kernels 2.6.32-24 (Ubuntu 10.04). Appears to use af9035 chip and unknown tuner (possible fitipower). Not supported by either 2.6.32 or trunk (30/08/2010) or by vendor supplied driver.
}}

</includeonly><noinclude>

==== avermedia-a825 ====
{{DeviceDisplayMedium|avermedia-a825}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a825
| vendor=[[AVerMedia]]
| device=AVerTV A825/TwinStar
| standard=DVB-T
| supported={{no}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9035|AF 9035]]
| tuner=
| demodulator=af9035
| usbbridge=af9035
| fw=
| comment=Dual AF9035 based. At this stage, AfaTech will not release full specifications, and so these cards are likely to remain unsupported.
}}

</includeonly><noinclude>

=== avermedia h800 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-h830d ====
{{DeviceDisplayMedium|avermedia-h830d}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-h830d
| vendor=[[AVerMedia]]
| device=AVerTV Volar Video Capture USB (H830D)
| standard=DVB-T
| supported={{no}}
| pic=[http://www.avermedia.com/avertv/Upload/ProductImages/Pro-H830D-AVerTV%20Volar%20Video%20Capture%20USB-300.jpg]
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=503&tab=APDriver]
| hostinterface=USB2.0
| usbid=07ca:1830
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=Written H830 on device. Tried with Ubuntu 10.04, Kernel 2.6.32-25-generic (x86_64), but no luck. In dmesg I see:
[ 2625.662599] usb 5-2: new full speed USB device using uhci_hcd and address 1 
[ 2625.838880] usb 5-2: configuration #1 chosen from 1 choice 

}}

</includeonly><noinclude>

=== AF9005 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== ansonic-stick ====
{{DeviceDisplayMedium|ansonic-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ansonic-stick
| vendor=Ansonic
| device=DVB-T USB1.1 stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.mail-archive.com/linux-dvb@linuxtv.org/msg28726.html]
| hostinterface=USB1.1
| usbid=10b9:6000
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=af9005.fw
}}

</includeonly><noinclude>

==== allnet-all2006 ====
{{DeviceDisplayMedium|allnet-all2006}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=allnet-all2006
| vendor=Allnet
| device=ALL2006 USB DVB-T Stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23 or .25?|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.allnet.de/product_info_allnet.php?cPath=_&products_id=99975]
| hostinterface=USB1.1
| usbid=
| comment=The tuner sensitivity is less than impressive.
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw]
}}

</includeonly><noinclude>
==== delock93168 ====
{{DeviceDisplayMedium|delock93168}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=delock93168
| vendor=Delock
| device=USB2.0 DVB-T Receiver Nr.93168
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23 or .25?|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://delock.de/produkte/gruppen/Multimedia/USB20_DVB-T_Empfnger_93168.html]
| hostinterface=USB1.1
| usbid=
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw]
}}

</includeonly><noinclude>

==== Easy TV A05 ====
{{DeviceDisplayMedium|easytv-a05}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=easytv-a05
| vendor=EasyTV
| device=EasyTV USB DVB-T Dongle
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://images.google.co.uk/images?q=easytv%20a05]
| hostinterface=USB1.1
| usbid=
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=af9005.fw
}}

</includeonly><noinclude>

==== ridata-t100 ====
{{DeviceDisplayMedium|ridata-t100}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ridata-t100
| vendor=Ridata
| device=USB DVB-T Stick T100
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23 or .25?|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.ritek.com/p2-pro5-lp.asp]
| hostinterface=USB1.1
| usbid=
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw]
}}

</includeonly><noinclude>
==== terratec-txe-rev1 ====
{{DeviceDisplayMedium|terratec-txe-rev1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-txe-rev1
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XE|Cinergy T USB XE (rev1)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.terratec.net/en/products/Cinergy_T_USB_XE_1672.html]
| hostinterface=USB1.1
| usbid=0ccd:0055
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw] or [http://ventoso.org/luca/af9005/af9005.fw-6.11.23.01 af9005.fw-6.11.23.01] (rename it to af9005.fw!)
| comment=
}}

</includeonly><noinclude>

=== AF9015 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== afatech-9015-9016 ====
{{DeviceDisplayMedium|afatech-9015-9016}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=afatech-9015-9016
| vendor=Afatech
| device=AF9015 DVB-T USB2.0 stick
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=15a4:9015 15a4:9016
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== avermedia-a309 ====
{{DeviceDisplayMedium|avermedia-a309}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a309
| vendor=[[AVerMedia]]
| device=A309 Mini Card
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a309
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== alcor-dtv-duo ====
{{DeviceDisplayMedium|alcor-dtv-duo}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=alcor-dtv-duo
| vendor=Alcor
| device=DTV DUO
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.37}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015|Afatech AF9015A + AF9013]], 2x MxL5007T (3f)
| tuner=mxl5007t
| demodulator=af9013
| usbbridge=af9015
| fw=dvd-usb-af9015.fw (5.1.0.0)
| comment=Dual tuner. Tested with kernel 2.6.37
}}

</includeonly><noinclude>

==== avermedia-a815 ====
{{DeviceDisplayMedium|avermedia-a815}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a815
| vendor=[[AVerMedia]]
| device=[[AVerMedia AVerTV Digi Volar X (A815)|AVerTV Digi Volar X (A815)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:Volar_x.png|120px]]
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=39]
| hostinterface=USB2.0
| usbid=07ca:a815
| hw=[[Afatech AF9015|Afatech AF9015-NT*]], MXL5003S
| tuner=mxl5003s
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== avermedia-a850 ====
{{DeviceDisplayMedium|avermedia-a850}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a850
| vendor=[[AVerMedia]]
| device=AVerTV Volar Black HD (A850)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.30-rc1}}
| pic=[[Image:AVerMedia_AVerTV_Volar_Black_HD_(A850).png|120px]]
| url=[http://www.avermedia.eu/avertv/SP/Product/ProductDetail.aspx?Id=431]
| hostinterface=USB2.0
| usbid=07ca:850a
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== avermedia-a805 ====
{{DeviceDisplayMedium|avermedia-a805}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a805
| vendor=[[AVerMedia]]
| device=AVerTV Volar GPS 805 (A805)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a805
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== conceptronic-ctvdigrcu ====
{{DeviceDisplayMedium|conceptronic-ctvdigrcu}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=conceptronic-ctvdigrcu
| vendor=Conceptronic
| device=USB2.0 DVB-T CTVDIGRCU V3.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:e397
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== dikom-ultimate ====
{{DeviceDisplayMedium|dikom-ultimate}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dikom-ultimate
| vendor=Dikom
| device=USB-DVB-T Ultimate
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.30}}
| pic=
| url=[http://www.dikom.it/catalogo.aspx?Prod=245]
| hostinterface=USB1.1 USB2.0
| usbid=
| hw=[[Afatech AF9015]], [[Quantek QT1010]]
| tuner=qt1010
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=also sold as "PEAK 203244AGPK DVB-T Digital TV USB Stick" and "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)" and others.
}}

</includeonly><noinclude>

==== digitalnow-tinytwin-v1 ====
{{DeviceDisplayMedium|digitalnow-tinytwin-v1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinytwin-v1
| vendor=DigitalNow
| device=[[DigitalNow TinyTwin DVB-T Receiver|TinyTwin DVB-T Receiver]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=13d3:3226
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== digitalnow-tinytwin-v2 ====
{{DeviceDisplayMedium|digitalnow-tinytwin-v2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinytwin-v2
| vendor=DigitalNow
| device=[[DigitalNow TinyTwin DVB-T Receiver|TinyTwin DVB-T Receiver V2]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.34}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:e402
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Different device, new USB ID.
}}

</includeonly><noinclude>

==== digitalnow-tinytwin-v3 ====
{{DeviceDisplayMedium|digitalnow-tinytwin-v3}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinytwin-v3
| vendor=DigitalNow
| device=[[DigitalNow TinyTwin DVB-T Receiver|TinyTwin DVB-T Receiver V3]]
| standard=DVB-T
| supported=Expected in 2.6.37
| pic=
| url=
| hostinterface=USB2.0
| usbid=1f4D:9016
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Different device, new USB ID.
}}

</includeonly><noinclude>

==== digittrade-stick ====
{{DeviceDisplayMedium|digittrade-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digittrade-stick
| vendor=DIGITTRADE
| device=DVB-T Stick
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.??}}
| pic=
| url=[http://www.digittrade.de/shop/product_info.php/info/p66_DIGITTRADE-DVB-T-Stick-USB-2-0-1-1-Windows-Linux-MAC-Eee-PC.html]
| hostinterface=USB1.1 USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== fujitsu-siemens-slim ====
{{DeviceDisplayMedium|fujitsu-siemens-slim}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=fujitsu-siemens-slim
| vendor=Fujitsu-Siemens
| device=Slim Mobile USB DVB-T
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:Fujitsu.JPG|120px]]
| url=
| hostinterface=USB2.0
| usbid=07ca:8150
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== geniatech-t328b ====
{{DeviceDisplayMedium|geniatech-t328b}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=geniatech-t328b
| vendor=Geniatech
| device=T328B
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:Geniatech_t328b.png|120px]]
| url=[http://www.geniatech.com/pa/t328b.htm]
| hostinterface=USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015]], [[Microtune MT2060]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== genius-tvgo-t03 ====
{{DeviceDisplayMedium|genius-tvgo-t03}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=genius-tvgo-t03
| vendor=Genius
| device=TVGo DVB-T03
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== hama-usb2stick ====
{{DeviceDisplayMedium|hama-usb2stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hama-usb2stick
| vendor=[[Hama]]
| device=[[Hama DVB-T USB2 Stick|DVB-T USB2 Stick]]
| standard=DVB-T
| supported={{Supported_in_HG|since=2008-09}}
| pic=[[image:HamaDVB_T-USB2-Stick.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]] (declared as 9016, working as [[Afatech AF9015|AF9015]])
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== kworld-395u ====
{{DeviceDisplayMedium|kworld-395u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-395u
| vendor=[[KWorld]]
| device=USB DVB-T TV Stick II (VS-DVB-T 395U)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.29}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:e396 1b80:e39b 1b80:e395
| hw=Afatech AF9013/[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=support for usbids 1b80:e39b 1b80:e395 added in 2.6.30
}}

</includeonly><noinclude>

==== kworld-399u-dual ====
{{DeviceDisplayMedium|kworld-399u-dual}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-399u-dual
| vendor=[[KWorld]]
| device=[[KWorld USB Dual DVB-T TV Stick (DVB-T 399U)|USB Dual DVB-T TV Stick (DVB-T 399U)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:KWorld_USB_Dual_DVB-T_TV_Stick_(DVB-T_399U).png|120px]]
| url=[http://global.kworld-global.com/main/prod_in.aspx?mnuid=1248&modid=6&pcid=44&ifid=17&prodid=73]
| hostinterface=USB2.0
| usbid=1b80:e399 1b80:e400
| hw=Afatech AF9013/[[Afatech AF9015]]/2x [[MXL5003S]]
| tuner=mxl5003s
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=support for 1b80:e400 added in 2.6.32
}}

</includeonly><noinclude>
==== kworld-ub499-2t ====
{{DeviceDisplayMedium|kworld-ub499-2t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-ub499-2t
| vendor=[[KWorld]]
| device=[[Kworld UB499-2T|UB499-2T]]
| standard=DVB-T
| supported=See Device page.
| pic=
| url=
| hostinterface=USB2.0
| usbid=048d:9135, 1b80:e409
| hw=Afatech/ITE IT9135 (usbid 048d:9135) or IT9137 (usbid 1b80:e409)
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>

==== kworld-pc160-2t ====
{{DeviceDisplayMedium|kworld-pc160-2t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-pc160-2t
| vendor=[[KWorld]]
| device=[[KWorld DVB-T PC160-2T|PlusTV Dual DVB-T PCI (DVB-T PC160-2T)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:Kworld pc160.jpg|120px]]
| url=
| hostinterface=PCI32
| usbid=1b80:c160
| hw=Afatech AF9013/[[Afatech AF9015]]/2x [[MXL5003S]]
| tuner=mxl5003s
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== kworld-mc810 ====
{{DeviceDisplayMedium|kworld-mc810}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-mc810
| vendor=[[KWorld]]
| device=Digial MC-810
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:c810
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== leadtek-dtv-gold ====
{{DeviceDisplayMedium|leadtek-dtv-gold}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-dtv-gold
| vendor=[[Leadtek]]
| device=[[Leadtek WinFast DTV Dongle Gold|WinFast DTV Dongle Gold]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:Leadtek_gold.jpg|100px]]
| url=[http://www.leadtek.com/eng/multimedia/overview.asp?lineid=6&pronameid=407&check=f]
| hostinterface=USB2.0
| usbid=0413:6029
| hw=[[Afatech AF9015]], [[NXP/Philips_TDA182xx|NXP/Philips TDA18271]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=dvb-usb-af9015.fw
| comment=
}}

</includeonly><noinclude>

==== lifeview-lv5t ====
{{DeviceDisplayMedium|lifeview-lv5t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=lifeview-lv5t
| vendor=[[LifeView]]
| device=LV5T
| standard=DVB-T
| supported={{Supported_in_HG|since=2008-09}}
| pic=
| url=[http://www.lifeview.hk/e/product/product_detail.asp?sku=14]
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]], [[NXP/Philips_TDA182xx|NXP/Philips TDA18271HD/C1]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw] (latest one works)
| comment=
}}

</includeonly><noinclude>
==== msi-digivox-duo ====
{{DeviceDisplayMedium|msi-digivox-duo}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-duo
| vendor=[[MSI]]
| device=DIGIVOX Duo
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=[http://eu.msi.com/index.php?func=proddesc&maincat_no=132&prod_no=1409]
| hostinterface=USB2.0
| usbid=1462:8801
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=dual tuner
}}

</includeonly><noinclude>
==== msi-digivox-mini-ii-v3 ====
{{DeviceDisplayMedium|msi-digivox-mini-ii-v3}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-ii-v3
| vendor=[[MSI]]
| device=[[MSI DigiVox mini II V3.0|DIGIVOX mini II V3.0]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}(MT2060 version) {{no}}(RTL2832 version)
| pic=[[image:Dvb-t-usb-msi-digivox-ii-rev3-001.jpg|120px]]
| url=[http://www.msi.com/index.php?func=proddesc&prod_no=1262&maincat_no=132&cat2_no=260]
| hostinterface=USB1.1 USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015]], [[Microtune MT2060]] or [[RTL2823]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Manufacturer changed tuner. See device page for details.
}}

</includeonly><noinclude>

==== msi-digivox-mini-iii ====
{{DeviceDisplayMedium|msi-digivox-mini-iii}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-iii
| vendor=[[MSI]]
| device=[[MSI DIGIVOX mini III|DIGIVOX mini III]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:MSI_DIGIVOX_mini_III.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=1462:8807
| hw=[[Afatech AF9015|Afatech AF9015A]], [[NXP/Philips_TDA182xx|NXP/Philips TDA18211HD]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== peak-203244 ====
{{DeviceDisplayMedium|peak-203244}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=peak-203244
| vendor=Peak
| device=203244AGPK DVB-T Digital TV USB Stick
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.30}}
| pic=[[Image:Peak-203244agpk.jpg|120px]]
| url=[http://www.peakhardware.com/products/productdetail.asp?PAID=390]
| hostinterface=USB1.1 USB2.0
| usbid=
| hw=[[Afatech AF9015]], [[Quantek QT1010]]
| tuner=qt1010?
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Identifies as "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)". Board has "DVBT-395U REV D" stamped on it, beneath casing.
}}

</includeonly><noinclude>

==== pinnacle-71e ====
{{DeviceDisplayMedium|pinnacle-71e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-71e
| vendor=[[Pinnacle]]
| device=PCTV 71e
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=2304:022b
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=dvb-usb-af9015.fw
| comment=Sometimes called "Pinnacle Dazzle 71e"
}}

</includeonly><noinclude>
==== szforward-eztv859 ====
{{DeviceDisplayMedium|szforward-eztv859}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=szforward-eztv859
| vendor=Shenzhen Forward Video
| device=EzTV859
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=[http://www.szforwardvideo.com/product/Pro_4_7.html] [http://www.made-in-china.com/china-products/productviewoMhxCZOdyfcR/Wand-TV-DVB-T-Stick-A15-.html]
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=sold under lots of different names like "WandTV", "EzTV A15", "EzTV DUTV007A" - '''Note, some may now be AF9035, which are UNSUPPORTED'''
}}

</includeonly><noinclude>

==== telstar-starstick2 ====
{{DeviceDisplayMedium|telstar-starstick2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=telstar-starstick2
| vendor=Telstar
| device=Starstick 2
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b9:8000
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== terratec-trc-mk2 ====
{{DeviceDisplayMedium|terratec-trc-mk2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-trc-mk2
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB RC|Cinergy T USB RC (mk II)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.37}}
| pic=[[image:Dvb-t-usb-terratec-cinergy-T-RC-mk2-001.jpg|120px]]
| url=[http://www.terratec.net/en/products/Cinergy_T_Stick_RC_97818.html]
| hostinterface=USB2.0
| usbid=0ccd:0097
| hw=[[Afatech AF9015|Afatech AF9015A]] + TDA18218HN + EM24C02A
| tuner=TDA18218HN
| demodulator=af9015A
| usbbridge=af9015A
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== terratec-txe-rev2 ====
{{DeviceDisplayMedium|terratec-txe-rev2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-txe-rev2
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XE|Cinergy T USB XE (rev2)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0069
| hw=[[Afatech AF9015|Afatech AF9015A]], Freescale mc44s803
| tuner=mc44s803
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== tevion-dk-5203 ====
{{DeviceDisplayMedium|tevion-dk-5203}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tevion-dk-5203
| vendor=Tevion
| device=DK-5203
| standard=DVB-T
| supported={{Supported_in_HG|since=2008-09}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=also sold as Elements DK-5203
}}

</includeonly><noinclude>
==== trekstor-dvb-t-usb ====
{{DeviceDisplayMedium|trekstor-dvb-t-usb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=trekstor-dvb-t-usb
| vendor=TrekStor
| device=DVB-T USB Stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=15a4:901b
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== tvisto-dvbusb-black ====
{{DeviceDisplayMedium|tvisto-dvbusb-black}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tvisto-dvbusb-black
| vendor=TVISTO
| device=[[TVISTO_DVB-T_USB|TVT-DVBTUSB]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:TVISTO_new_black_DVB-T_USB.png|120px]]
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015|Afatech AF9015]], [[Microtune_MT2060|Microtune MT2060]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== twinhan-ad-tu700 ====
{{DeviceDisplayMedium|twinhan-ad-tu700}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhan-ad-tu700
| vendor=TwinHan
| device=AzureWave AD-TU700(704J)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=13d3:3237
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== xtensions-xd-380 ====
{{DeviceDisplayMedium|xtensions-xd-380}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=xtensions-xd-380
| vendor=Xtensions
| device=XD-380
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1ae7:0381
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-stick-rc-hd ====
{{DeviceDisplayMedium|terratec-cinergy-t-stick-rc-hd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-stick-rc-hd
| vendor=[[TerraTec]]
| device=Cinergy T Stick RC HD
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.37-rc6}}
| pic=[[image:TerraTec-Cinergy-T-Stick-RC-HD.png|120px]]
| url=[http://www.terratec.net/fr/produkte/Cinergy_T_Stick_RC_HD_97881.html]
| hostinterface=USB2.0
| usbid=0CCD:0097
| hw=[[Afatech AF9015]], Tuner TDA18218
| tuner=TDA18218
| demodulator=af9015
| usbbridge=af901x
| fw=dvb-usb-af9015.fw
| comment=Also known as "Cinergy T RC MKII". On this version the outer package says "Cinergy T RC" and a label on the stick itself says "MKII". Support for new tuner TDA18218 [http://www.spinics.net/lists/linux-media/msg22084.html] is working with 2.6.37-rc6.
}}

</includeonly><noinclude>

=== AF9035 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== asus-my-cinema-u3100-mini-plus ====
{{DeviceDisplayMedium|asus-my-cinema-u3100-mini-plus}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3100-mini-plus
| vendor=[[ASUS]]
| device=[[Asus U3100 Mini plus DVB-T|My Cinema U3100 Mini Plus DVBT Tuner]]
| standard=DVB-T
| supported={{yes}}, but see device page for details.
| pic=[[image:Asus_U3100_Mini_plus_DVB-T_01.JPG|120px]]
| url=
| hostinterface=USB2.0
| usbid=0b05:1779
| hw=AF9035A
| tuner=FCI2580
| demodulator=AF9035B
| usbbridge=AF9035
| fw=The only firmware required is a mapping for the IR.
| comment=There's an older device by almost the same name (without the "plus"), which is dib7xxx based and works out of the box.
}}

</includeonly><noinclude>

==== terratec-cinergy-t-stick-af9035 ====
{{DeviceDisplayMedium|terratec-cinergy-t-stick-af9035}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-stick-af9035
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T Stick|Cinergy T Stick]]
| standard=DVB-T
| supported={{yes}}, but see device page for details.
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9035]], TUA9001
| tuner=tua9001
| demodulator=af9035
| usbbridge=af903x
| fw=
| comment=
}}

</includeonly><noinclude>

==== ezcap-afatech-9035 ====
{{DeviceDisplayMedium|ezcap-afatech-9035}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ezcap-afatech-9035
| vendor=EzCap
| device=[[EzCap_DVB_T_Stick|DVB-T USB2.0 stick]]
| standard=DVB-T
| supported={{yes}}, but see device page for details.
| pic=[[Image:EzTV_USB_DVB-T_internals_3243.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=15a4:1001
| hw=[[Afatech AF9035]]
| tuner=fc0011
| demodulator=af9035
| usbbridge=af903x
| fw=
| comment=Sold as '''Infinity PC-TV Nano DVB-T USB stick''' (at least in Croatia) and as '''Blaze HDTV Tuner''' in Australia.
}}

</includeonly><noinclude>

==== msi-digivox-mini-hybrid ====
{{DeviceDisplayMedium|msi-digivox-mini-hybrid}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-hybrid
| vendor=[[MSI]]
| device=DIGIVOX mini Hybrid
| standard=DVB-T, ANALOG
| supported={{no}}
| pic=[http://www.msi-computer.de/uploads/prod_637f6fab6ac0763c30e114664986ff59.jpg]
| url=[http://www.msi-computer.de/index.php?func=proddesc&prod_no=10045&maincat_no=132&cat2_no=261]
| hostinterface=USB2.0
| usbid=1d6b:0001
| hw=[[Afatech AF9035]], Trident AVF4910B
| tuner=xc3028L
| demodulator=af9035
| usbbridge=af903x
| fw=
| comment=Product number S36-0400132-K36. Sometimes called "DIGIVOX mini II Hybrid"
}}

</includeonly><noinclude>

=== Anysee E30 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== anysee-e30-dvb-t ====
{{DeviceDisplayMedium|anysee-e30-dvb-t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=anysee-e30-dvb-t
| vendor=[[Anysee]]
| device=[[Anysee E30|E30]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.27}}
| pic=
| url=[http://www.anysee.com/eng/product/anyseeE30.php]
| hostinterface=USB2.0
| usbid=1c73:861f or 04b4:861f
| comment=Need clarification which "usbid" comes with which E30 device.
| tuner=
| demodulator=mt352 zl10353
| usbbridge=
| hw=mt352 or zl10353 demodulator
| fw=
}}

</includeonly><noinclude>
==== anysee-e30-plus-dvb-t ====
{{DeviceDisplayMedium|anysee-e30-plus-dvb-t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=anysee-e30-plus-dvb-t
| vendor=[[Anysee]]
| device=[[Anysee E30|E30 Plus]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.27}}
| pic=
| url=[http://www.anysee.com/eng/product/anyseeE30Plus.php]
| hostinterface=USB2.0
| usbid=1c73:861f or 04b4:861f
| comment=
| tuner=
| demodulator=zl10353
| usbbridge=
| hw=zl10353 demodulator
| fw=
}}

</includeonly><noinclude>
==== anysee-e30-combo-plus-dvb-tc ====
{{DeviceDisplayMedium|anysee-e30-combo-plus-dvb-tc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=anysee-e30-combo-plus-dvb-tc
| vendor=[[Anysee]]
| device=[[Anysee E30|E30 Combo Plus]]
| standard=DVB-T DVB-C
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=[http://www.anysee.com/eng/product/anyseeE30ComboPlus.php]
| hostinterface=USB2.0
| usbid=1c73:861f or 04b4:861f
| comment=Does DVB-T and DVB-C depending on ''anysee.ko'' module parameter ''delsys='' (0=DVB-C, 1=DVB-T).
| tuner=
| demodulator=zl10353 tda10023
| usbbridge=
| hw=zl10353 or tda10023 demodulator
| fw=
}}

</includeonly><noinclude>

=== au6610 devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== sigmatek-dvb-110 ====
{{DeviceDisplayMedium|sigmatek-dvb-110}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=sigmatek-dvb-110
| vendor=Sigmatek
| device=DVB-110
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.21}}
| pic=[[image:Sigmatek DVB-110 001 stripped.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=058f:6610
| hw=Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller
| tuner=qt1010
| demodulator=zl10353
| usbbridge=au6610
| fw=none needed
| comment=
}}

</includeonly><noinclude>
=== Intel CE6230 based receivers ===
</noinclude><includeonly>

</includeonly><noinclude>
==== intel-ce9500-reference ====
{{DeviceDisplayMedium|intel-ce9500-reference}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=intel-ce9500-reference
| vendor=[[Intel]]
| device=[[Noname CE6230 OEM|CE9500 reference design / CE6230 noname devices]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30|file=drivers/media/dvb/dvb-usb/ce6230.c}}
| pic=[[image:Intel CE6230 1.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=8086:9500
| hw=mxl5003s, ce6230 (zl10353)
| tuner=mxl5003s
| demodulator=zl10353
| usbbridge=ce6230
| fw=none needed
| comment=
}}

</includeonly><noinclude>

==== avermedia-a310 ====
{{DeviceDisplayMedium|avermedia-a310}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a310
| vendor=[[AVerMedia]]
| device=A310 USB 2.0 DVB-T tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a310
| hw=mxl5003s, zl10353
| tuner=mxl5003s
| demodulator=zl10353
| usbbridge=ce6230
| fw=none needed
| comment=
}}

</includeonly><noinclude>

=== TerraTec Cinergy T² ===
</noinclude><includeonly>

</includeonly><noinclude>
==== terratec-cinergy-t2 ====
{{DeviceDisplayMedium|terratec-cinergy-t2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t2
| vendor=[[TerraTec]]
| device=[[TerraTec_Cinergy_T2|Cinergy T2]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.12}}
| pic=
| url=[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=238]
| hostinterface=USB2.0
| usbid=0ccd:0038
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=
| fw=
| comment=Aka. "Cinergy T²" (T-square).
}}

</includeonly><noinclude>
=== cxusb ===
</noinclude><includeonly>

</includeonly><noinclude>
==== medion-md95700 ====
{{DeviceDisplayMedium|medion-md95700}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=medion-md95700
| vendor=Medion
| device=MD95700 (MDUSBTV-HYBRID)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1660:0932
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=none
| comment=
}}

</includeonly><noinclude>

==== dvico-fusion-hdtv-5-gold ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-5-gold}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-5-gold
| vendor=DViCO
| device=FusionHDTV5 USB Gold
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:d500
| hw=
| tuner=lgh064f
| demodulator=lgdt3303
| usbbridge=
| fw=dvb-usb-bluebird-01.fw
| comment=warm usbid 0fe9:d700
}}

</includeonly><noinclude>

==== dvico-fusion-hdtv-dual-1 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-1
| vendor=DViCO
| device=FusionHDTV DVB-T Dual USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db50
| hw=
| tuner=dee1601
| demodulator=dee1601
| usbbridge=
| fw=
| comment=warm usbid 0fe9:db51
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-lgz201 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-lgz201}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-lgz201
| vendor=DViCO
| device=FusionHDTV DVB-T USB (LGZ201)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db00
| hw=
| tuner=lgz201
| demodulator=mt352
| usbbridge=
| fw=dvb-usb-bluebird-01.fw
| comment=0fe9:db01
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-th7579 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-th7579}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-th7579
| vendor=DViCO
| device=FusionHDTV DVB-T USB (TH7579)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db10
| hw=
| tuner=dtt7579
| demodulator=mt352
| usbbridge=
| fw=dvb-usb-bluebird-01.fw
| comment=0fe9:db11
}}

</includeonly><noinclude>
==== digitalnow-dee1601-dual ====
{{DeviceDisplayMedium|digitalnow-dee1601-dual}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-dee1601-dual
| vendor=DigitalNow
| device=DVB-T Dual USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db54
| hw=
| tuner=dee1601
| demodulator=dee1601
| usbbridge=
| fw=
| comment=warm usbid 0fe9:db54
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-dual-2 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-2
| vendor=DViCO
| device=FusionHDTV DVB-T Dual Digital 2
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db58
| hw=
| tuner=dee1601
| demodulator=dee1601
| usbbridge=
| fw=
| comment=warm usbid 0fe9:db59
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-dual-4-rev1 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-4-rev1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-4-rev1
| vendor=DViCO
| device=FusionHDTV DVB-T Dual Digital 4
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db78
| hw=
| tuner=xc3028
| demodulator=zl10353
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-nano-1 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-nano-1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-nano-1
| vendor=DViCO
| device=FusionHDTV DVB-T NANO
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db70
| hw=
| tuner=xc3028
| demodulator=zl10353
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-nano-2 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-nano-2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-nano-2
| vendor=DViCO
| device=FusionHDTV DVB-T NANO2 w/o firmware
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db70
| hw=
| tuner=xc3028
| demodulator=mt352 or zl10353
| usbbridge=
| fw=dvb-usb-bluebird-02.fw
| comment=0fe9:db71
}}

</includeonly><noinclude>
==== avermedia-a868 ====
{{DeviceDisplayMedium|avermedia-a868}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a868
| vendor=AVerMedia
| device=AVerTVHD Volar (A868R)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.27}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a868
| hw=
| tuner=mxl5003s
| demodulator=lgdt3303
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-dual-4-rev2 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-4-rev2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-4-rev2
| vendor=DViCO
| device=FusionHDTV DVB-T Dual Digital 4 (rev 2)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db98
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>

=== [[DiBcom DiB7xxx|DiB0700]] USB2.0 DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== dibcom-stk7700p-ref ====
{{DeviceDisplayMedium|dibcom-stk7700p-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7700p-ref
| vendor=[[DiBcom]]
| device=STK7700P reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1e14
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== dibcom-stk7700pc-ref ====
{{DeviceDisplayMedium|dibcom-stk7700pc-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7700pc-ref
| vendor=[[DiBcom]]
| device=STK7700PC reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=
| tuner=
| demodulator=dib7000m
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== kaiserbaas-Netbook-TvStick-STK7770P ====
{{DeviceDisplayMedium|kaiserbaas-Netbook-TvStick-STK7770P}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kaiserbaas-Netbook-TvStick-STK7770P
| vendor=Kaiser Baas
| device=TVStick KBA01007-KB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=[[Image:KB_TVStick.jpeg|120px]]
| hostinterface=USB2.0
| usbid=10b8:1e80
| hw=DiB7770P
| tuner=
| url=[http://www.kaiserbaas.com/kaiser-baas-product-page/tv-tuners/usb-hd-tvstick-tuner-netbook]
| demodulator=dib7000m
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment= This is a clone of the 'DiBcom STK7770P reference design' This netbook version comes with 2gb of storage on the USB and a 28 key slim ir remote control [[http://www.linuxtv.org/wiki/index.php/File:Kaiserbaas-ir-remote.jpeg (image)]]. This remote control is NOT supported by the current DIB0070 driver (at 2.6.35.22) [[http://www.linuxtv.org/pipermail/linux-dvb/2010-November/032782.html]].
}}

</includeonly><noinclude>
==== hauppauge-nova-t-stick ====
{{DeviceDisplayMedium|hauppauge-nova-t-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t-stick
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-Stick|Nova-T Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:7050 2040:7060
| hw=DiB7700M or DiB7700P, MT2060
| tuner=mt2060
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=2040:7060 added in 2.6.20. There are several [[Hauppauge WinTV-NOVA-T-Stick|variants]] by the same name.
}}

</includeonly><noinclude>

==== avermedia-avertv-volar ====
{{DeviceDisplayMedium|avermedia-avertv-volar}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-avertv-volar
| vendor=[[AVerMedia]]
| device=AVerTV DVB-T Volar
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a807 07ca:b808
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=07ca:b808 since 2.6.20
}}

</includeonly><noinclude>
==== hauppauge-nova-t500-dual ====
{{DeviceDisplayMedium|hauppauge-nova-t500-dual}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t500-dual
| vendor=[[Hauppauge]]
| device=Nova-T 500 Dual DVB-T
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:9941 2040:9950
| hw=
| tuner=
| demodulator=
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== compro-videomate-u500 ====
{{DeviceDisplayMedium|compro-videomate-u500}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=compro-videomate-u500
| vendor=Compro
| device=Videomate U500
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=[http://www.comprousa.com/en/product/u500/u500.html]
| hostinterface=USB2.0
| usbid=185b:1e78 185b:1e80
| hw=
| tuner=mt2060
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=185b:1e80 added in 2.6.24
}}

</includeonly><noinclude>

==== uniwill-stk7700p ====
{{DeviceDisplayMedium|uniwill-stk7700p}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=uniwill-stk7700p
| vendor=Uniwill
| device=STK7700P based (Hama and others)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1584:6003
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== leadtek-stk7700p ====
{{DeviceDisplayMedium|leadtek-stk7700p}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-stk7700p
| vendor=[[Leadtek]]
| device=Winfast DTV Dongle (STK7700P based)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0413:6f00 0413:6f01
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=0413:6f01 added in 2.6.26
}}

</includeonly><noinclude>
==== pinnacle-pctv-2000e ====
{{DeviceDisplayMedium|pinnacle-pctv-2000e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-2000e
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV Dual DVB-T Diversity (2000e)|PCTV 2000e]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:022c
| hw=DiB7700P, Dib 7000P, 2 * MT2266
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet.
}}

</includeonly><noinclude>

==== terratec-dt-xs-diversity ====
{{DeviceDisplayMedium|terratec-dt-xs-diversity}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-dt-xs-diversity
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy DT USB XS Diversity|Cinergy DT XS Diversity]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=[http://www.terratec.net/en/products/Cinergy_DT_USB_XS_Diversity_1608.html]
| hostinterface=USB2.0
| usbid=0ccd:005a
| hw=DiB7700P, Dib 7000P, 2 * MT2266
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet.
}}

</includeonly><noinclude>

==== hauppauge-nova-td-diversity ====
{{DeviceDisplayMedium|hauppauge-nova-td-diversity}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-td-diversity
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-TD-Stick|Nova-TD Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:9580
| hw=DiB7700P, Dib 7000P, 2 * MT2266
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet. same as: Elgato Eye-TV Diversity
}}

</includeonly><noinclude>

==== dibcom-stk7700d-ref ====
{{DeviceDisplayMedium|dibcom-stk7700d-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7700d-ref
| vendor=[[DiBcom]]
| device=STK7700D reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1ef0
| hw=
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=dual tuner/diversity device
}}

</includeonly><noinclude>

==== dibcom-dib7070p-ref ====
{{DeviceDisplayMedium|dibcom-dib7070p-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib7070p-ref
| vendor=[[DiBcom]]
| device=STK7070P reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1ebc
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-flash-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-flash-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-flash-stick
| vendor=[[Pinnacle]]
| device=PCTV DVB-T Flash Stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0228
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== dibcom-dib7070pd-ref ====
{{DeviceDisplayMedium|dibcom-dib7070pd-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib7070pd-ref
| vendor=[[DiBcom]]
| device=STK7070PD reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1ebe
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=dual tuner device
}}

</includeonly><noinclude>
==== pinnacle-pctv-dual-diversity-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-dual-diversity-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-dual-diversity-stick
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV Dual DVB-T Diversity Stick (2001e)|PCTV 2001e Dual DVB-T Diversity Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0229
| hw=DiB0700, 2 * DiB7070P
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet.
}}

</includeonly><noinclude>

==== avermedia-avertv-dvbt-t-express ====
{{DeviceDisplayMedium|avermedia-avertv-dvbt-t-express}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-avertv-dvbt-t-express
| vendor=[[AVerMedia]]
| device=AVerTV DVB-T Express
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:b568
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== gigabyte-u7000 ====
{{DeviceDisplayMedium|gigabyte-u7000}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=gigabyte-u7000
| vendor=Gigabyte
| device=U7000
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=[http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ProductID=2440]
| hostinterface=USB2.0
| usbid=1044:7001
| hw=Microtune 2060, Dibcom 7700 series
| tuner=mt2060
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=[http://osdir.com/ml/linux-media/2009-06/msg01254.html Remote is not working yet.(7.2009)]
}}

</includeonly><noinclude>

==== artec-t14br-dib7xxx-based ====
{{DeviceDisplayMedium|artec-t14br-dib7xxx-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t14br-dib7xxx-based
| vendor=[[Artec]]
| device=T14BR DVB-T
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=[http://www.artec.com.tw/ehtm/products/t14.htm]
| hostinterface=USB2.0
| usbid=05d8:810f
| hw=DiB7070P (DiB7000PC + DiB0070)
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Remote control untested.
}}

</includeonly><noinclude>
==== asus-my-cinema-u3000-mini ====
{{DeviceDisplayMedium|asus-my-cinema-u3000-mini}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3000-mini
| vendor=[[ASUS]]
| device=My Cinema U3000 Mini DVBT Tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=[http://www.asus.com/products.aspx?l1=18&l2=84&l3=255&l4=0&model=1298&modelmenu=1]
| url=
| hostinterface=USB2.0
| usbid=0b05:171f
| hw=DiB7700P
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=ASUS also provides drivers for this device through their [http://support.asus.com/download/download.aspx?SLanguage=en-us&model=My%20Cinema-U3000Mini website]
}}

</includeonly><noinclude>
==== asus-my-cinema-u3100-mini-dib ====
{{DeviceDisplayMedium|asus-my-cinema-u3100-mini-dib}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3100-mini-dib
| vendor=[[ASUS]]
| device=My Cinema U3100 Mini DVBT Tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0b05:173f
| hw=DiB7070P (DiB7000PC + DiB0070)
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== hauppauge-nova-t-ce-stick ====
{{DeviceDisplayMedium|hauppauge-nova-t-ce-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t-ce-stick
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-Stick|Nova-T-CE Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:7070
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== hauppauge-nova-t-mytv-t-stick ====
{{DeviceDisplayMedium|hauppauge-nova-t-mytv-t-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t-mytv-t-stick
| vendor=[[Hauppauge]]
| device=[[Hauppauge myTV.t|Nova-T MyTV.t Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:7080
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== terratec-cinergy-ht-usb-xe ====
{{DeviceDisplayMedium|terratec-cinergy-ht-usb-xe}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-ht-usb-xe
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy HT USB XE|Cinergy HT USB XE]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0058
| hw=DiB7700ci tuner:XC3028
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== pinnacle-expresscard-320cx ====
{{DeviceDisplayMedium|pinnacle-expresscard-320cx}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-expresscard-320cx
| vendor=[[Pinnacle]]
| device=Expresscard 320cx
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:022e
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-72e ====
{{DeviceDisplayMedium|pinnacle-pctv-72e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-72e
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV 72e|PCTV 72e]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=[http://neduz.be/dvb/pinnacle_pctv_dvb-t_stick_solo.jpg]
| url=
| hostinterface=USB2.0
| usbid=2304:0236
| hw=DiB7000PC
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== pinnacle-pctv-73e-plain ====
{{DeviceDisplayMedium|pinnacle-pctv-73e-plain}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-73e-plain
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV nano Stick (73e)|PCTV 73e]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=[http://www.flickr.com/photos/nk-h/2630657143/] [http://www.flickr.com/photos/nk-h/2630658003/]
| url=
| hostinterface=USB2.0
| usbid=2304:0237
| hw=DiB7000PC
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== yuan-ec372s ====
{{DeviceDisplayMedium|yuan-ec372s}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-ec372s
| vendor=YUAN High-Tech
| device=EC372S
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1edc
| hw=DiB7700P
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-ht-express ====
{{DeviceDisplayMedium|terratec-cinergy-ht-express}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-ht-express
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy HT Express|Cinergy HT Express]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0060
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-usb-xxs-t3 ====
{{DeviceDisplayMedium|terratec-cinergy-t-usb-xxs-t3}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-usb-xxs-t3
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XXS|Cinergy T USB XXS/ T3]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}}
| pic=[[image:Terratec Cinergy XXS 001.jpg|120px]] [[image:Terratec T3 001.jpg|120px]]
| url=[http://www.terratec.net/en/products/Cinergy_T_USB_XXS_2068.html] [http://www.terratec.net/en/products/TerraTec_T3_83463.html]
| hostinterface=USB2.0
| usbid=0ccd:0078 0ccd:10a0
| hw=DiB7070P (DiB7000PC + DiB0070)
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=T3 (0ccd:10a0) added in 2.6.31
}}

</includeonly><noinclude>

==== hauppauge-nova-td-stick-52009 ====
{{DeviceDisplayMedium|hauppauge-nova-td-stick-52009}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-td-stick-52009
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-TD-Stick|Nova-TD Stick (52009)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.27}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:5200
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== hauppauge-nova-td-500-84xxx ====
{{DeviceDisplayMedium|hauppauge-nova-td-500-84xxx}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-td-500-84xxx
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-500#WinTV-NOVA-TD-500 |Nova-TD-500 (84xxx)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.27}}
| pic=[[image:Nova-td-500.jpg|120px]]
| url=[http://www.hauppauge.co.uk/pages/products/data_novat500.html]
| hostinterface=PCI32
| usbid=2040:8400
| hw=2×DiB3000P, 2×MT2060, LNA
| tuner=mt2060
| demodulator=dib3000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=''Bristol'' device (PCI card with USB devices onboard). DiB3000P on DiB0700. The LNA may need manual activation.
}}

</includeonly><noinclude>

==== gigabyte-u8000-rh ====
{{DeviceDisplayMedium|gigabyte-u8000-rh}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=gigabyte-u8000-rh
| vendor=Gigabyte
| device=U8000-RH
| standard=DVB-T ANALOG-NTSC ANALOG-PAL ANALOG-SECAM
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=[http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ProductID=2441]
| hostinterface=USB2.0
| usbid=1044:7002
| hw=DIB7700C, XC3028ACQ, CX25843-24Z
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=hybrid dvb-t and analog device
}}

</includeonly><noinclude>

==== yuan-high-tech-stk7700ph ====
{{DeviceDisplayMedium|yuan-high-tech-stk7700ph}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-stk7700ph
| vendor=YUAN High-Tech
| device=STK7700PH
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1f08
| hw=
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=DVB-part of the Asus notebook M51Sn tv-tunner
}}

</includeonly><noinclude>

==== yuan-high-tech-pd770a ====
{{DeviceDisplayMedium|yuan-high-tech-pd770a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-pd770a
| vendor=YUAN High-Tech
| device=PD770A
| standard=DVB-T, ANALOG-PAL, ANALOG-NTSC, ANALOG-SECAM, FM-RADIO
| supported=
Mixed:
* DVB-T part: {{Clone of|src=USB_Device_Data|did=yuan-high-tech-stk7700ph}} but not working yet?
* Analog TV: {{no}}
* FM Radio: {{no}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1f08
| hw=
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== crypto-diva-pd770a ====
{{DeviceDisplayMedium|crypto-diva-pd770a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=crypto-diva-pd770a
| vendor=Crypto
| device=[[Crypto Diva FM DVB-T Hybrid|Diva FM DVB-T Hybrid]]
| standard=DVB-T, ANALOG-PAL, ANALOG-NTSC, ANALOG-SECAM, FM-RADIO
| supported={{Clone of|src=USB_Device_Data|did=yuan-high-tech-pd770a}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1f08
| hw=
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Apparently a full clone of the YUAN High-Tech PD770A, only sold in Greece.
}}

</includeonly><noinclude>

==== asus-my-cinema-u3000hybrid ====
{{DeviceDisplayMedium|asus-my-cinema-u3000hybrid}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3000hybrid
| vendor=[[ASUS]]
| device=My Cinema-U3000Hybrid
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0b05:1736
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== pinnacle-pctv-hd-pro-usb-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-hd-pro-usb-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-hd-pro-usb-stick
| vendor=Pinnacle
| device=PCTV HD Pro USB Stick (801e)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:023a
| hw=
| tuner=xc5000
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-hd-usb-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-hd-usb-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-hd-usb-stick
| vendor=Pinnacle
| device=PCTV HD USB Stick (801e SE)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:023b
| hw=
| tuner=xc5000
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-express ====
{{DeviceDisplayMedium|terratec-cinergy-t-express}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-express
| vendor=TerraTec
| device=Cinergy T Express
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.29}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0062
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-dt-usb-xs-diversity-t5 ====
{{DeviceDisplayMedium|terratec-cinergy-dt-usb-xs-diversity-t5}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-dt-usb-xs-diversity-t5
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy DT USB XS Diversity|Cinergy DT USB XS Diversity/ T5]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.29}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0081 0ccd:10a1
| hw=2 * DiB7070PB1, DiB 0700C
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=0ccd:10a1 added in 2.6.31 . This device looks identical to [[TerraTec Cinergy DT USB XS Diversity|this one]] and is sold (in Germany) under the same name and in an almost identical box.
}}

</includeonly><noinclude>

==== sony-playtv ====
{{DeviceDisplayMedium|sony-playtv}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=sony-playtv
| vendor=Sony
| device=[[Sony PlayTV dual tuner DVB-T|PlayTV]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=[http://uk.playstation.com/ps3/hardware/accessories/detail/item102429/PlayTV/]
| hostinterface=USB2.0
| usbid=1415:0003
| hw=2*DiB7070P stk7070pd
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual Tuner.
}}

</includeonly><noinclude>

==== yuan-pd378s ====
{{DeviceDisplayMedium|yuan-pd378s}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-pd378s
| vendor=YUAN High-Tech
| device=PD378S
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:2edc
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== hauppauge-atsc-minicard-b200- ====
{{DeviceDisplayMedium|hauppauge-atsc-minicard-b200-}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-atsc-minicard-b200-
| vendor=Hauppauge
| device=ATSC MiniCard (B200)
| standard=ATSC
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:b200
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=ATCS device .. move to ATSC table later
}}

</includeonly><noinclude>
==== hauppauge-atsc-minicard-b210- ====
{{DeviceDisplayMedium|hauppauge-atsc-minicard-b210-}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-atsc-minicard-b210-
| vendor=Hauppauge
| device=ATSC MiniCard (B210)
| standard=ATSC
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:b210
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=ATCS device .. move to ATSC table later
}}

</includeonly><noinclude>
==== yuan-high-tech-mc770 ====
{{DeviceDisplayMedium|yuan-high-tech-mc770}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-mc770
| vendor=YUAN High-Tech
| device=MC770
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:0871
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== elgato-eyetv-dtt-plain ====
{{DeviceDisplayMedium|elgato-eyetv-dtt-plain}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=elgato-eyetv-dtt-plain
| vendor=[[Elgato]]
| device=[[Elgato EyeTV DTT|EyeTV DTT]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fd9:0021
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=clone of Hauppauge WinTV-NOVA-T
}}

</includeonly><noinclude>

==== elgato-eyetv-dtt-dlx-pd378s ====
{{DeviceDisplayMedium|elgato-eyetv-dtt-dlx-pd378s}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=elgato-eyetv-dtt-dlx-pd378s
| vendor=[[Elgato]]
| device=[[Elgato EyeTV DTT deluxe|EyeTV DTT deluxe (PD378S)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fd9:0020
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== elgato-eyetv-dtt-dlx-v2 ====
{{DeviceDisplayMedium|elgato-eyetv-dtt-dlx-v2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=elgato-eyetv-dtt-dlx-v2
| vendor=[[Elgato]]
| device=[[Elgato EyeTV DTT deluxe v2|EyeTV DTT deluxe v2]]
| standard=DVB-T
| supported=unknown
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fd9:002c
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>

==== leadtek-winfast-dtv-dongle-h ====
{{DeviceDisplayMedium|leadtek-winfast-dtv-dongle-h}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-winfast-dtv-dongle-h
| vendor=Leadtek
| device=WinFast DTV Dongle H
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0413:60f6
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== yuan-high-tech-stk7700d ====
{{DeviceDisplayMedium|yuan-high-tech-stk7700d}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-stk7700d
| vendor=YUAN High-Tech
| device=STK7700D
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1efc
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== yuan-high-tech-dibcom-stk7700d ====
{{DeviceDisplayMedium|yuan-high-tech-dibcom-stk7700d}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-dibcom-stk7700d
| vendor=YUAN High-Tech
| device=DiBcom STK7700D
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1e8c
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-73a ====
{{DeviceDisplayMedium|pinnacle-pctv-73a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-73a
| vendor=[[Pinnacle]]
| device=PCTV 73A
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0243
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-73e-se ====
{{DeviceDisplayMedium|pinnacle-pctv-73e-se}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-73e-se
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV nano Stick (73e)|PCTV 73e SE (solo)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=[http://www.pctvsystems.com/Products/ProductsEuropeAsia/Digitalproducts/PCTVnanoStickSolo/tabid/176/language/en-GB/Default.aspx]
| hostinterface=USB2.0
| usbid=2304:0245
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Same as the plain 73e but without remote control, antenna adapter and USB extension cable.
}}

</includeonly><noinclude>

==== pinnacle-pctv-282e ====
{{DeviceDisplayMedium|pinnacle-pctv-282e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-282e
| vendor=[[Pinnacle]]
| device=PCTV 282e
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0248
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== dibcom-stk7770p-reference-design ====
{{DeviceDisplayMedium|dibcom-stk7770p-reference-design}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7770p-reference-design
| vendor=[[DiBcom]]
| device=STK7770P reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1e80
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-usb-xxs-hd ====
{{DeviceDisplayMedium|terratec-cinergy-t-usb-xxs-hd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-usb-xxs-hd
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XXS|Cinergy T USB XXS (HD)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}}
| pic=[[image:Terratec Cinergy XXS 001.jpg|120px]]
| url=[http://www.terratec.net/en/products/Cinergy_T_USB_XXS_2068.html]
| hostinterface=USB2.0
| usbid=0ccd:00ab
| hw=dib7770
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== dibcom-stk807xpvr-reference-design ====
{{DeviceDisplayMedium|dibcom-stk807xpvr-reference-design}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk807xpvr-reference-design
| vendor=DiBcom
| device=STK807xPVR reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1f98
| hw=
| tuner=
| demodulator=dib8000
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== dibcom-stk807xp-reference-design ====
{{DeviceDisplayMedium|dibcom-stk807xp-reference-design}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk807xp-reference-design
| vendor=[[DiBcom]]
| device=STK807xP reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1f90
| hw=
| tuner=
| demodulator=dib8000
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== prolink-pixelview-sbtvd ====
{{DeviceDisplayMedium|prolink-pixelview-sbtvd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=prolink-pixelview-sbtvd
| vendor=Prolink
| device=Pixelview SBTVD
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1554:5010
| hw=
| tuner=
| demodulator=dib8000
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

=== [[DiBcom DiB3000|DiB3000M-B]] USB1.1 DVB-T devices===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-dib3000mb-based ====
{{DeviceDisplayMedium|avermedia-dib3000mb-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-dib3000mb-based
| vendor=[[AVerMedia]]
| device=AVerTV DVBT USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.avermedia.com/cgi-bin/products_digitvtuner_dvbtusb.asp?show=2]
| hostinterface=USB1.1
| usbid=14aa:0001
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=Whats the Axxx model number of this device? warm usbid 14aa:0002
}}

</includeonly><noinclude>
==== compro-videomate-u2000 ====
{{DeviceDisplayMedium|compro-videomate-u2000}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=compro-videomate-u2000
| vendor=Compro
| device=Videomate DVB-U2000 - DVB-T USB1.1
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.comprousa.com/en/product/vmu2000.html]
| hostinterface=USB1.1
| usbid=185b:d000 145f:010c
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbids: 185b:d001 145f:010c
}}

</includeonly><noinclude>

==== dibcom-dib3000mb-mod3000 ====
{{DeviceDisplayMedium|dibcom-dib3000mb-mod3000}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib3000mb-mod3000
| vendor=[[DiBcom]]
| device=USB1.1 DVB-T reference design (MOD3000)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=10b8:0bb8
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 10b8:0bb9
}}

</includeonly><noinclude>

==== kworld-xpert-dtv-dib3000mb ====
{{DeviceDisplayMedium|kworld-xpert-dtv-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-xpert-dtv-dib3000mb
| vendor=[[KWorld]]
| device=V-Stream XPERT DTV - DVB-T USB1.1
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=eb1a:17de
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: eb1a:17df
}}

</includeonly><noinclude>
==== grandtec-dib3000mb ====
{{DeviceDisplayMedium|grandtec-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=grandtec-dib3000mb
| vendor=Grandtec
| device=USB1.1 DVB-T
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=5032:0fa0 5032:0bb8
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 5032:0fa1 5032:0bb9
}}

</includeonly><noinclude>
==== unknown-dib3000mb ====
{{DeviceDisplayMedium|unknown-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=unknown-dib3000mb
| vendor=Unknown
| device=Unkown USB1.1 DVB-T device ???? please report the name to the author
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=1025:005e
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 1025:005f
}}

</includeonly><noinclude>
==== twinhan-magicbox-i-hama ====
{{DeviceDisplayMedium|twinhan-magicbox-i-hama}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhan-magicbox-i-hama
| vendor=Twinhan
| device=TwinhanDTV USB-Ter USB1.1 (VP7041)/ TwinhanDTV Magic Box I (VP7041e)/ HAMA USB1.1 DVB-T device
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=[http://www.hama.de/bilder/00049/abb/00049021abb.jpg]
| url=[http://www.twinhan.com/product_terrestrial_3.asp] [http://www.twinhan.com/product_terrestrial_5.asp]
| hostinterface=USB1.1
| usbid=13d3:3201 1822:3201
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 13d3:3202 1822:3202
}}

</includeonly><noinclude>

==== artec-t1-an2135 ====
{{DeviceDisplayMedium|artec-t1-an2135}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-an2135
| vendor=[[Artec]]
| device=[[Artec T1 USB TV Box|T1 USB1.1 TVBOX with AN2135]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=05d8:8105
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 05d8:8106
}}

</includeonly><noinclude>

==== videowalker-dib3000mb ====
{{DeviceDisplayMedium|videowalker-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=videowalker-dib3000mb
| vendor=VideoWalker
| device=DVB-T USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.geniusnet.com.tw/product/product-1.asp?pdtno=541]
| hostinterface=USB1.1
| usbid=0458:701e
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 0458:701f
}}

</includeonly><noinclude>

==== artec-t1-an2235 ====
{{DeviceDisplayMedium|artec-t1-an2235}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-an2235
| vendor=[[Artec]]
| device=[[Artec T1 USB TV Box|T1 USB1.1 TVBOX with AN2235]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=05d8:8107
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-an2235-01.fw
| comment=warm usbid: 05d8:8108
Some "broken" devices where sold with cold id: 0547:2235 . You will need to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY in the kernel .config to catch those.
}}

</includeonly><noinclude>

==== kworld-300u ====
{{DeviceDisplayMedium|kworld-300u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-300u
| vendor=[[KWorld]]
| device=300U/Instant DVB-T USB2.0 PTV-333
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.tv-cards.com/model.php?modelid=162]
| hostinterface=USB2.0
| usbid=06e1:a333
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-adstech-usb2-02.fw
| comment=warm usbid: 06e1:a334
}}

</includeonly><noinclude>
===== adstech-ptv333 =====
{{DeviceDisplayMedium|adstech-ptv333}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=adstech-ptv333
| vendor=ADSTech
| device=Instant DVB-T USB2.0 PTV-333
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=kworld-300u}}
| pic=
| url=[http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333]
| hostinterface=USB2.0
| usbid=06e1:a333
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-adstech-usb2-02.fw
| comment=warm usbid: 06e1:a334
}}

</includeonly><noinclude>

==== kworld-xpert-usb2 ====
{{DeviceDisplayMedium|kworld-xpert-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-xpert-usb2
| vendor=[[KWorld]]
| device=Xpert DVB-T USB2.0
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.14}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=eb2a:17de
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-adstech-usb2-02.fw
| comment=
}}

</includeonly><noinclude>

==== artec-t1-dib3000mb-usb2 ====
{{DeviceDisplayMedium|artec-t1-dib3000mb-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-dib3000mb-usb2
| vendor=[[Artec]]
| device=T1 USB2.0
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.15}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=05d8:8109
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid: 05d8:810a
}}

</includeonly><noinclude>

=== [[DiBcom DiB3000|DiB3000M-C/P]] USB2.0 DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== dibcom-dib3000mc-mod3000p ====
{{DeviceDisplayMedium|dibcom-dib3000mc-mod3000p}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib3000mc-mod3000p
| vendor=[[DiBcom]]
| device=USB2.0 DVB-T reference design (MOD3000P)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=10b8:0bc6
| hw=Panasonic tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid: 10b8:0bc7
}}

</includeonly><noinclude>

==== artec-t1-3000mc-usb2 ====
{{DeviceDisplayMedium|artec-t1-3000mc-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-3000mc-usb2
| vendor=[[Artec]]
| device=T1 USB2.0 TVBOX
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=05d8:8109
| hw=Panasonic tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=Author says: Please check the warm ID.( is it 05d8:810a ?)
}}

</includeonly><noinclude>
==== lite-on-dib3000mc ====
{{DeviceDisplayMedium|lite-on-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=lite-on-dib3000mc
| vendor=LITE-ON
| device=USB2.0 DVB-T Tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=[[image:Dvb-t-usb-toshiba-px1211e-1tvd-001.jpg|120px]]
| url=
| hostinterface=USB1.1 USB2.0
| usbid=04ca:f000
| hw=
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 04ca:f001 Also rebranded as "Intuix Tv Tuner Tnt S800", "Toshiba USB DVB-T Tuner PX1211E-1TVD", and "Medion USB DVB-T TV Tuner"
}}

</includeonly><noinclude>

==== msi-digivox-mini-sl ====
{{DeviceDisplayMedium|msi-digivox-mini-sl}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-sl
| vendor=[[MSI]]
| device=Digivox Mini SL
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=[http://www1.conrad.de/xl/9000_9999/9900/9940/9949/994904_BB_00_FB.EPS.jpg]
| url=
| hostinterface=USB1.1 USB2.0
| usbid=eb1a:e360
| hw=
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid eb1a:e361
}}

</includeonly><noinclude>

==== grand-dib3000mc ====
{{DeviceDisplayMedium|grand-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=grand-dib3000mc
| vendor=GRAND
| device=USB2.0 DVB-T adapter
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=[http://www.grand.com.tw/en/product_form.asp?lwk_series=54&lwk_product=h-005&lwk_page=1]
| url=
| hostinterface=USB1.1 USB2.0
| usbid=5032:0bc6
| hw=
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 5032:0bc7
}}

</includeonly><noinclude>
==== artec-t14-dib3000mc-based ====
{{DeviceDisplayMedium|artec-t14-dib3000mc-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t14-dib3000mc-based
| vendor=[[Artec]]
| device=T14
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=[http://www.artec.com.tw/ehtm/be122.htm]
| hostinterface=USB1.1 USB2.0
| usbid=05d8:810b
| hw=MT2060 silicon tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 05d8:810c Based on the DiBcom DVB-T USB 2.0 reference design.
}}

</includeonly><noinclude>

==== leadtek-dib3000mc-based ====
{{DeviceDisplayMedium|leadtek-dib3000mc-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-dib3000mc-based
| vendor=[[Leadtek]]
| device=USB2.0 Winfast DTV dongle (STK3000P based)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=231]
| hostinterface=USB1.1 USB2.0
| usbid=0413:6025
| hw=MT2060 silicon tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 0413:6026
}}

</includeonly><noinclude>
==== yuan-pd300-dib3000mc ====
{{DeviceDisplayMedium|yuan-pd300-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-pd300-dib3000mc
| vendor=YUAN High-Tech
| device=PD300 DVB-T mobility
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| hostinterface=USB1.1 USB2.0
| url=[http://www.linuxtv.org/pipermail/linux-dvb/2006-March/008936.html] [http://www.yuan.com.tw/en/products/vdo_pd300mini.htm]
| usbid=10b8:0bc6
| hw=MT2060 silicon tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=same usbid as ref design, but different tuner, yikes! warm usbid: 10b8:0bc7
}}

</includeonly><noinclude>

===== clones =====
</noinclude><includeonly>

</includeonly><noinclude>
====== toshiba-px1211e-1tvd ======
{{DeviceDisplayMedium|toshiba-px1211e-1tvd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=toshiba-px1211e-1tvd
| vendor=Toshiba
| device=PX1211E-1TVD USB DVB-T Tuner
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=lite-on-dib3000mc}}
| hostinterface=USB1.1 USB2.0
}}

</includeonly><noinclude>

====== intuix-tnt-s800 ======
{{DeviceDisplayMedium|intuix-tnt-s800}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=intuix-tnt-s800
| vendor=Intuix
| device=Tv Tuner Tnt S800
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=lite-on-dib3000mc}}
| hostinterface=USB1.1 USB2.0
}}

</includeonly><noinclude>
====== medion-95733-95713 ======
{{DeviceDisplayMedium|medion-95733-95713}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=medion-95733-95713
| vendor=Medion
| device=USB DVB-T TV Tuner (MD95733/MD95713)
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=lite-on-dib3000mc}}
| hostinterface=USB1.1 USB2.0
}}

</includeonly><noinclude>
====== typhoon-tv-movie-dib3000mc ======
{{DeviceDisplayMedium|typhoon-tv-movie-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=typhoon-tv-movie-dib3000mc
| vendor=Typhoon
| device=TV MOVIE STICK
| url=[http://www.typhoon.de/en/art.php?p=826&c=]
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=msi-digivox-mini-sl}}
| hostinterface=USB1.1 USB2.0
| comment="Art. 50506"
}}

</includeonly><noinclude>

=== Nebula DigiTV USB version - DVB-T ===
</noinclude><includeonly>

</includeonly><noinclude>
==== nebula-micro-digitv-usb ====
{{DeviceDisplayMedium|nebula-micro-digitv-usb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=nebula-micro-digitv-usb
| vendor=[[Nebula]]
| device=micro-DigiTV USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.nebula-electronics.com/information/info.asp?Code=0003]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]] or NxtWave(now ATI/AMD) Nxt6000
| tuner=
| demodulator=mt352, nxt6000
| usbbridge=
| fw=dvb-usb-digitv-01.fw
| comment=The device is also called "µDigiTV" (using the micro symbol instead of spelling it out). There is an SDK for download on the Nebula WebSite, which was used to improve the driver's quality. Was the first USB2.0 box on the market (late 2003/early 2004).
}}

</includeonly><noinclude>

=== dtt200u.c WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices===
</noinclude><includeonly>

</includeonly><noinclude>
==== wideview-wt200u ====
{{DeviceDisplayMedium|wideview-wt200u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-wt200u
| vendor=WideView/YUAN/Yakumo/Hama/Typhoon
| device=DVB-T USB2.0 (WT-200U)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:0201
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-dtt200u-01.fw
| comment=warm usbid 14aa:0301
}}

</includeonly><noinclude>
==== wideview-wt220u ====
{{DeviceDisplayMedium|wideview-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-wt220u
| vendor=WideView
| device=WT-220U PenType Receiver (Typhoon/Freecom)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:0222 14aa:0220
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-02.fw
| comment=warm usbid 14aa:0221. Support for Club3D Zap 250 (14aa:0220) added in 2.6.19 Hardware. PID filter table count 15 - limited to about 3 or 4 simultaneous TV channels.
}}

</includeonly><noinclude>
==== wideview-zl353-wt220u ====
{{DeviceDisplayMedium|wideview-zl353-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-zl353-wt220u
| vendor=WideView
| device=WT-220U PenType Receiver (based on ZL353)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:022a
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-zl0353-01.fw
| comment=warm usbid 14aa:022b
}}

</includeonly><noinclude>
==== wideview-fc-wt220u ====
{{DeviceDisplayMedium|wideview-fc-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-fc-wt220u
| vendor=Freecom
| device=DVB-T (WT-220U PenType Receiver)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:0225
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-fc03.fw
| comment=warm usbid 14aa:0226
}}

</includeonly><noinclude>
==== miglia-wt220u ====
{{DeviceDisplayMedium|miglia-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=miglia-wt220u
| vendor=Miglia
| device=WT-220U PenType Receiver
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=18f3:0220
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-miglia-01.fw
| comment=warm usbid 14aa:022b(according to a comment in the code)
}}

</includeonly><noinclude>

=== m920x devices ===

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/media/dvb/dvb-usb/m920x.c
</noinclude><includeonly>

</includeonly><noinclude>
==== msi-mega-sky-580 ====
{{DeviceDisplayMedium|msi-mega-sky-580}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-mega-sky-580
| vendor=[[MSI]]
| device=Mega Sky 580
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.21}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=0db0:5580
| hw=tuner: qt1010 demodulator: mt352 USB Bridge: ULi M9206
| tuner=qt1010
| demodulator=mt352
| usbbridge=m920x
| fw=dvb-usb-megasky-02.fw
| comment=Apparently the [[MSI Mega Sky 55801]] is sold under the same name. At least they have a different usb id.
}}

</includeonly><noinclude>

==== lifeview-lr540 ====
{{DeviceDisplayMedium|lifeview-lr540}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=lifeview-lr540
| vendor=[[LifeView]]
| device=[[LifeView TV Walker Twin DVB-T (LR540)|TV Walker Twin DVB-T (LR540)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}(one tuner) {{Supported_in_Kernel|since=2.6.23}}(both tuners)
| pic=[[image:LifeView TV Walker Twin.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=10fd:0513
| hw=tuner: 2x[[NXP/Philips_TDA827x|NXP/Philips 8275AC1]] demodulator: 2xNXP/Philips TDA10046A USB Bridge: ULi M9206
| tuner=tda8275
| demodulator=tda1004x
| usbbridge=m920x
| fw=dvb-usb-tvwalkert.fw
| comment=
}}

</includeonly><noinclude>
==== zappa-lr523 ====
{{DeviceDisplayMedium|zappa-lr523}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=zappa-lr523
| vendor=Zappa
| device=[[LifeView TV Walker Twin DVB-T (LR540)#Zappa_DVB-T_USB_LR523|DVB-T USB LR523]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10fd:0513
| hw=tuner: [[NXP/Philips_TDA827x|NXP/Philips 8275AC1]] demodulator: NXP/Philips TDA10046A USB Bridge: ULi M9206
| tuner=tda8275
| demodulator=tda1004x
| usbbridge=m920x
| fw=dvb-usb-tvwalkert.fw
| comment=
}}

</includeonly><noinclude>
==== msi-digivox-mini-ii-v1 ====
{{DeviceDisplayMedium|msi-digivox-mini-ii-v1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-ii-v1
| vendor=[[MSI]]
| device=[[MSI DigiVox mini II|DIGI VOX mini II]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10fd:1513
| hw=tuner: [[NXP/Philips_TDA827x|NXP/Philips 8275AC1]] demodulator: NXP/Philips TDA10046A USB Bridge: ULi M9206
| tuner=tda8275
| demodulator=tda1004x
| usbbridge=m920x
| fw=dvb-usb-digivox-02.fw
| comment=
}}

</includeonly><noinclude>
==== dposh-920x ====
{{DeviceDisplayMedium|dposh-920x}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dposh-920x
| vendor=Dposh
| device=DVB-T USB2.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1498:9206
| hw=tuner: qt1010 demodulator: mt352 USB Bridge: ULi M9206
| tuner=qt1010
| demodulator=mt352
| usbbridge=m920x
| fw=dvb-usb-dposh-01.fw
| comment=
}}

</includeonly><noinclude>
=== Hauppauge WinTV-NOVA-T usb2 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== hauppauge-wintv-nova-t-usb2 ====
{{DeviceDisplayMedium|hauppauge-wintv-nova-t-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-wintv-nova-t-usb2
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-USB2|WinTV-NOVA-T USB2]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:9300
| hw=dib3000mc
| tuner=dib3000mc
| demodulator=dib3000mc
| usbbridge=
| fw=dvb-usb-nova-t-usb2-02.fw
| comment=
}}

</includeonly><noinclude>

=== HanfTek UMT-010 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== hanftek-umt-010 ====
{{DeviceDisplayMedium|hanftek-umt-010}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hanftek-umt-010
| vendor=Hanftek
| device=UMT-010
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.hanftek.com/] [http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014259.html]
| hostinterface=USB2.0
| usbid=15f4:0001
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=dib3000mc
| fw=dvb-usb-umt-010-02.fw
| comment=Stick-sized. Different colours (blue, grey, red). USBID: 15f4:0001(cold) 15f4:0015(warm)
}}

</includeonly><noinclude>

=== MSI Mega Sky 55801 DVB-T USB2.0 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== msi-mega-sky-55801 ====
{{DeviceDisplayMedium|msi-mega-sky-55801}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-mega-sky-55801
| vendor=[[MSI]]
| device=[[MSI Mega Sky 55801|Mega Sky 55801]] DVB-T USB2.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.21}}
| pic=[[image:MSIMegasky55801-exterior-small.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=0db0:5581
| hw=[[Zarlink ZL10353]] Tuner: Quantek QT1010 USB bridge: Genesys Logic GL861
| tuner=qt1010
| demodulator=zl10353
| usbbridge=gl861
| fw=none needed
| comment=The QT1010 in this device has it's problems. If you get no or poor signal on Linux, that's "normal". You can try lowering the signal strength from your antenna, remove signal boosters and/or buy an attenuator. Or buy a device with better support.
}}

</includeonly><noinclude>

==== a-link-dtu-dvb-t-no-postfix ====
{{DeviceDisplayMedium|a-link-dtu-dvb-t-no-postfix}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=a-link-dtu-dvb-t-no-postfix
| vendor=A-LINK
| device=DTU DVB-T USB2.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.23}}
| pic=[[image:A-LINK DTU-002.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=05e3:f170
| hw=[[Zarlink ZL10353]] Tuner: Quantek QT1010 USB bridge: Genesys Logic GL861
| tuner=qt1010
| demodulator=zl10353
| usbbridge=gl861
| fw=none needed
| comment=This is neither the "A-LINK DTU(m)" (which is a AF9015 device) nor the "A-LINK DTU(h)" (which from the pictures I've seen, looks very much like a re-branded "GeniaTech T328B").
}}

</includeonly><noinclude>

=== Twinhan DVB-T USB2.0 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== digitalnow-tinyusb-2 ====
{{DeviceDisplayMedium|digitalnow-tinyusb-2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinyusb-2
| vendor=DigitalNow
| device=TinyUSB 2 DVB-t
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.digitalnow.com.au/product_images/tinyusb2-device.jpg]
| url=[http://www.digitalnow.com.au/product_pages/tinyusb2.html]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=
}}

</includeonly><noinclude>
==== digitalrise-ter-beetle ====
{{DeviceDisplayMedium|digitalrise-ter-beetle}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalrise-ter-beetle
| vendor=DigitalRise
| device=DVB-T USB 2.0 Ter Beetle
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.digitalrise.biz/images/products/dvb_tuner/ter/usb2/large.jpg]
| url=[http://www.digitalrise.biz/products/dvb_tuner/ter/usb2/]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=Looks like a clone of the DigitalNow TinyUSB 2 DVB-t.
}}

</includeonly><noinclude>
==== dnt-euromini-100 ====
{{DeviceDisplayMedium|dnt-euromini-100}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dnt-euromini-100
| vendor=dnt
| device=EuroMini 100
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=Looks like clone of TwinhanDTV Alpha
}}

</includeonly><noinclude>
==== fujitsu-siemens-dvbt-mobile-tv-tuner ====
{{DeviceDisplayMedium|fujitsu-siemens-dvbt-mobile-tv-tuner}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=fujitsu-siemens-dvbt-mobile-tv-tuner
| vendor=Fujitsu-Siemens
| device=DVB-T Mobile TV Tuner
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[[Image:Fujitsu-Siemens-DVB-T-Mobile-001.jpg|120px]]
| url=[http://www.fujitsu-siemens.de/home/products/accessories/others/dvb_t_mobile.html de] [http://www.fujitsu-siemens.com/home/products/others/dvb_t_mobile.html en]
| hostinterface=USB2.0
| usbid=13d3:3205
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=Looks like clone of TwinhanDTV Alpha
}}

</includeonly><noinclude>

==== twinhandtv-alpha-rev7045 ====
{{DeviceDisplayMedium|twinhandtv-alpha-rev7045}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhandtv-alpha-rev7045
| vendor=TwinhanDTV
| device=Alpha
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.twinhan.com/Images/products/TwinHanDTV-alpha_B.jpg]
| url=[http://www.twinhan.com/product_terrestrial_7.asp]
| hostinterface=USB2.0
| usbid=13d3:3205
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment='''It seems that some TwinhanDTV Alphas(rev 7045A) need newer firmware. 7045A sticks have another frontend and need another firmware. The 7045A frontend is tda10046 based. ''' The symptoms are that they can not find any channels. Consequently, they are unusable at the moment. See these posts for more details: [http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014202.html][http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014226.html][http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015145.html][http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015222.html]
}}

</includeonly><noinclude>
==== twinhandtv-magicboxii ====
{{DeviceDisplayMedium|twinhandtv-magicboxii}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhandtv-magicboxii
| vendor=TwinhanDTV
| device=MagicBox II
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.twinhan.com/Images/products/TwinhanDTV-MagicBox2_B.jpg]
| url=[http://www.twinhan.com/product_terrestrial_6.asp]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=
}}

</includeonly><noinclude>

=== WideView/Yakumo/Hama/Typhoon/Yuan Boxes and Pens ===
</noinclude><includeonly>

</includeonly><noinclude>
==== bestbuy-easy-tv-wt220u ====
{{DeviceDisplayMedium|bestbuy-easy-tv-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=bestbuy-easy-tv-wt220u
| vendor=Bestbuy
| device=Easy TV
| standard=DVB-T
| supported={{yes}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=dvb-usb-wt220u-02.fw
| comment=This is a WideView WT-220U PenType Receiver (Typhoon/Freecom).
}}

</includeonly><noinclude>
=== Supported Em2880/Em2870 Based USB DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== bestbuy-easy-tv-hybrid ====
{{DeviceDisplayMedium|bestbuy-easy-tv-hybrid}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=bestbuy-easy-tv-hybrid
| vendor=BestBuy
| device=Easy TV USB hybrid
| standard=DVB-T
| supported={{Supported_in_External|since=?|url=http://mcentral.de/wiki/index.php5/Em2880}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=eb1a:2881
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>
=== AME DTV-5100 / TechGear DigitalTV Stick (TGTV-490) ===
</noinclude><includeonly>

</includeonly><noinclude>
==== ame-dtv-5100 ====
{{DeviceDisplayMedium|ame-dtv-5100}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ame-dtv-5100
| vendor=AME
| device=DTV-5100
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=[[image:AME-dtv-5100-001.jpg|120px]]
| url=[http://www.ame-group.com/dtv_5100.htm] [http://royale.zerezo.com/dtv5100/] [http://www.tatatou.org/dotclear/index.php?2008/08/26/162-tuto-premier-jet]
| hostinterface=USB2.0
| usbid=06be:a232
| hw=qt1010, zl10353 (WJCE6353), CY7C68013A
| tuner=qt1010
| demodulator=zl10353
| usbbridge=
| fw=none needed
| comment=Also sold as "TechGear DigitalTV Stick (TGTV-490)"
}}

</includeonly><noinclude>

=== AVerMedia AverTV Hybrid Volar HX (A827) ===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-a827 ====
{{DeviceDisplayMedium|avermedia-a827}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a827
| vendor=[[AVerMedia]]
| device=[[AVerMedia AverTV Hybrid Volar HX (A827)|AverTV Hybrid Volar HX (A827)]]
| standard=DVB-T, ANALOG, FM
| supported={{Supported by Vendor|text=[[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=293&tab=APDriver]]}}
| pic=[http://www.avermedia.com/avertv/Upload/ProductImages/A827%20Renew%20300.jpg]
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=293]
| hostinterface=USB2.0
| usbid=07ca:a827
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
=== Supported TM5600/6000/6010 Based USB DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== terratec-cinergy-hybrid-xe ====
{{DeviceDisplayMedium|terratec-cinergy-hybrid-xe}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-hybrid-xe
| vendor=Terratec
| device=Cinergy Hybrid XE
| standard=DVB-T, ANALOG
| supported={{Supported in Kernel|since=2.6.35}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0086
| hw=
| tuner=xc3028L
| demodulator=ZL10353
| usbbridge=tm6010
| fw=xc3028L-v36.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-hybrid-stick ====
{{DeviceDisplayMedium|terratec-cinergy-hybrid-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-hybrid-stick
| vendor=Terratec
| device=Cinergy Hybrid Stick
| standard=DVB-T, ANALOG
| supported={{Supported in Kernel|since=2.6.35}}
| pic=[http://www.terratec.net/en/products/pictures/img/2418555_24d41902b7.png]
| url=[http://www.terratec.net/en/products/Cinergy_Hybrid_Stick_82268.html]
| hostinterface=USB2.0
| usbid=0ccd:00a5
| hw=
| tuner=xc3028L
| demodulator=ZL10353
| usbbridge=TM6010
| fw=xc3028L-v36.fw
| comment=
}}

</includeonly><noinclude>
==== hauppauge-wintv-hvr900h ====
{{DeviceDisplayMedium|hauppauge-wintv-hvr900h}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-wintv-hvr900h
| vendor=Hauppauge
| device=WinTv HVR-900H
| standard=DVB-T, ANALOG
| supported={{Supported in Kernel|since=2.6.35}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:6600
| hw=
| tuner=xc3028L
| demodulator=zl10353
| usbbridge=TM6010
| fw=xc3028L-v36.fw
| comment=
}}

</includeonly>

TerraTec Cinergy T USB RC

2011-01-05T11:54:19Z

Wirbel:

{{Device_List_Medium_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Medium_Detail/Row
|selatt1=did
|selval1=terratec-trc-mk2
}}
}}

=== Version 2 AF9015 ===
USB ID: 0ccd:0097
Manufacturer: NEWMI

There is a patch available to support this device:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html

However, this patch doesnt fit anymore perfectly on 2.6.35.4 due to some changes on IR and there is no official support in dvb-hg; so this patch needs to be adapted and applied.
Testing afterwards can be done as usual, for example with tzap, scan or w_scan. Needs also firmware [http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw dvb-usb-af9015.fw].

Note: current Windows driver uses firmware 5.1.0.0, but the patched dvb-usb-af9015 works better with 4.95.0.0

Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.

After applying patch and loading dvb-usb-af9015 you should see the following:
<pre>
usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
</pre>

=== [http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html patch] with changes to linux-2.6.35.4 ===
<pre>
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/Kconfig /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Kconfig
--- linux-2.6.35.4/drivers/media/common/tuners/Kconfig 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Kconfig 2011-01-04 13:59:07.642000010 +0100
@@ -179,4 +179,11 @@
help
A driver for the silicon tuner MAX2165 from Maxim.

+config MEDIA_TUNER_TDA18218
+ tristate "NXP TDA18218 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ A driver for the silicon tuner TDA18218 from NXP.
+
endif # MEDIA_TUNER_CUSTOMISE
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/Makefile /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Makefile
--- linux-2.6.35.4/drivers/media/common/tuners/Makefile 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Makefile 2011-01-04 13:59:50.733000011 +0100
@@ -24,6 +24,7 @@
obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o
obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
+obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o

EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218.c /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.c
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218.c 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.c 2011-01-04 15:22:54.068000023 +0100
@@ -0,0 +1,471 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "tda18218.h"
+//#include "compat.h"
+#include "tda18218_priv.h"
+
+static int tda18218_write_reg(struct dvb_frontend *fe, u8 reg, u8 val)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,
+ .buf = buf, .len = 2 };
+ int ret;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ /* write register */
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 1)
+ printk(KERN_WARNING "I2C write failed ret: %d reg: %02x\n", ret, reg);
+
+ return (ret == 1 ? 0 : ret);
+}
+
+static int tda18218_write_regs(struct dvb_frontend *fe, u8 reg,
+ u8 *val, u8 len)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 buf[1+len];
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf };
+
+ int ret;
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (ret != 1)
+ printk(KERN_WARNING "I2C write failed ret: %d reg: %02x len: %d\n", ret, reg, len);
+
+ return (ret == 1 ? 0 : ret);
+}
+
+/*static int tda18218_read_reg(struct tda18218_priv *priv, u16 reg, u8 *val)
+{
+ u8 obuf[3] = { reg >> 8, reg & 0xff, 0 };
+ u8 ibuf[1];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = 0x3a,
+ .flags = 0,
+ .len = sizeof(obuf),
+ .buf = obuf
+ }, {
+ .addr = 0x3a,
+ .flags = I2C_M_RD,
+ .len = sizeof(ibuf),
+ .buf = ibuf
+ }
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "I2C read failed reg:%04x\n", reg);
+ return -EREMOTEIO;
+ }
+ *val = ibuf[0];
+ return 0;
+}*/
+
+static int tda18218_read_regs(struct dvb_frontend *fe)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 *regs = priv->tda18218_regs;
+ u8 buf = 0x00;
+ int ret;
+ //int i;
+ struct i2c_msg msg[] = {
+ { .addr = 0xc0, .flags = 0,
+ .buf = &buf, .len = 1 },
+ { .addr = 0xc0, .flags = I2C_M_RD,
+ .buf = regs, .len = 59 }
+ };
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ /* read all registers */
+ ret = i2c_transfer(priv->i2c, msg, 2);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 2)
+ printk(KERN_WARNING "I2C read failed ret: %d\n", ret);
+
+ /*for(i = 0; i <= 58; i++)
+ printk("Register %d: %02x\n", i, 0xff & regs[i]);*/
+
+ return (ret == 2 ? 0 : ret);
+}
+
+static int tda18218_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 *regs = priv->tda18218_regs;
+ u8 Fc, BP;
+ int i, ret;
+ u16 if1, bw;
+ u32 freq;
+
+ u8 paramsbuf[4][6] = {
+ { 0x03, 0x1a },
+ { 0x04, 0x0a },
+ { 0x01, 0x0f },
+ { 0x01, 0x0f },
+ };
+
+ u8 agcbuf[][2] = {
+ { 0x1a, 0x0e },
+ { 0x20, 0x60 },
+ { 0x23, 0x02 },
+ { 0x20, 0xa0 },
+ { 0x23, 0x09 },
+ { 0x20, 0xe0 },
+ { 0x23, 0x0c },
+ { 0x20, 0x40 },
+ { 0x23, 0x01 },
+ { 0x20, 0x80 },
+ { 0x23, 0x08 },
+ { 0x20, 0xc0 },
+ { 0x23, 0x0b },
+ { 0x24, 0x1c },
+ { 0x24, 0x0c },
+ };
+
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ bw = 6000;
+ Fc = 0;
+ break;
+ case BANDWIDTH_7_MHZ:
+ bw = 7000;
+ Fc = 1;
+ break;
+ case BANDWIDTH_8_MHZ:
+ bw = 8000;
+ Fc = 2;
+ break;
+ default:
+ printk(KERN_WARNING "Invalid bandwidth");
+ return -EINVAL;
+ }
+
+ if1 = bw / 2;
+
+ if((params->frequency >= 174000000) && (params->frequency < 188000000)) {
+ BP = 3;
+ }
+ else if((params->frequency >= 188000000) && (params->frequency < 253000000)) {
+ BP = 4;
+ }
+ else if((params->frequency >= 253000000) && (params->frequency < 343000000)) {
+ BP = 5;
+ }
+ else if((params->frequency >= 343000000) && (params->frequency <= 870000000)) {
+ BP = 6;
+ }
+ else {
+ printk(KERN_WARNING "Frequency out of range");
+ return -EINVAL;
+ }
+
+ freq = params->frequency;
+ freq /= 1000;
+ freq +=if1;
+ freq *= 16;
+
+ tda18218_read_regs(fe);
+
+ paramsbuf[0][2] = regs[0x1a] | BP;
+ paramsbuf[0][3] = regs[0x1b] & ~3;
+ paramsbuf[0][3] = regs[0x1b] | Fc;
+ paramsbuf[0][4] = regs[0x1c] | 0x0a;
+
+ paramsbuf[1][2] = freq >> 16;
+ paramsbuf[1][3] = freq >> 8;
+ paramsbuf[1][4] = (freq & 0xf0) | (regs[0x0c] & 0x0f);
+ paramsbuf[1][5] = 0xff;
+ paramsbuf[2][2] = regs[0x0f] | 0x40;
+ paramsbuf[3][2] = 0x09;
+
+ tda18218_write_reg(fe, 0x04, 0x03);
+
+ for(i = 0; i < ARRAY_SIZE(paramsbuf); i++) {
+
+ /* write registers */
+ ret = tda18218_write_regs(fe, paramsbuf[i][1], &paramsbuf[i][2], paramsbuf[i][0]);
+
+ if (ret)
+ goto error;
+ }
+ for(i = 0; i < ARRAY_SIZE(agcbuf); i++) {
+ tda18218_write_reg(fe, agcbuf[i][0], agcbuf[i][1]);
+ }
+
+ //tda18218_write_reg(fe, 0x03, 0x00);
+ //tda18218_write_reg(fe, 0x04, 0x00);
+ //tda18218_write_reg(fe, 0x20, 0xc7);
+
+ msleep(60);
+ i = 0;
+ while(i < 10) {
+ tda18218_read_regs(fe);
+ if((regs[0x01] & 0x60) == 0x60)
+ printk(KERN_INFO "We've got a lock!"); break;
+ msleep(20);
+ i++;
+ }
+
+ priv->bandwidth = params->u.ofdm.bandwidth;
+ priv->frequency = params->frequency;
+ return 0;
+error:
+ return ret;
+}
+
+static int tda18218_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int tda18218_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+static int tda18218_init(struct dvb_frontend *fe)
+{
+ //struct tda18218_priv *priv = fe->tuner_priv;
+ //u8 *regs = priv->tda18218_regs;
+ int i;
+ int ret;
+
+ u8 initbuf[][18] = {
+ { 0x10, 0x05, 0x00, 0x00, 0xd0, 0x00, 0x40, 0x00, 0x00, 0x07, 0xff, 0x84, 0x09, 0x00, 0x13, 0x00, 0x00, 0x01 },
+ { 0x0b, 0x15, 0x84, 0x09, 0xf0, 0x19, 0x0a, 0x0e, 0x29, 0x98, 0x00, 0x00, 0x58 },
+ { 0x10, 0x24, 0x0c, 0x48, 0x85, 0xc9, 0xa7, 0x00, 0x00, 0x00, 0x30, 0x81, 0x80, 0x00, 0x39, 0x00, 0x8a, 0x00 },
+ { 0x07, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, 0xf6 },
+ };
+
+ u8 initbuf2[4];
+
+ for(i = 0; i < ARRAY_SIZE(initbuf); i++) {
+
+ /* write registers */
+ ret = tda18218_write_regs(fe, initbuf[i][1], &initbuf[i][2], initbuf[i][0]);
+
+ if (ret != 0) {
+ printk(KERN_ERR "init: ERROR: i2c_transfer returned: %d\n", ret);
+ return -EREMOTEIO;
+ }
+ if(i == 1) {
+ tda18218_write_reg(fe, 0x22, 0x8c);
+ }
+ }
+
+ tda18218_write_reg(fe, 0x05, 0x80);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x05, 0x20);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x27, 0xde);
+ tda18218_write_reg(fe, 0x17, 0xf8);
+ tda18218_write_reg(fe, 0x18, 0x0f);
+ tda18218_write_reg(fe, 0x1c, 0x8b);
+ tda18218_write_reg(fe, 0x29, 0x02);
+ tda18218_write_reg(fe, 0x19, 0x1a);
+ tda18218_write_reg(fe, 0x11, 0x13);
+
+ initbuf2[0] = 0x0a;
+ initbuf2[1] = 0x5c;
+ initbuf2[2] = 0xc6;
+ initbuf2[3] = 0x07;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x05, 0x40);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x05, 0x20);
+ tda18218_write_reg(fe, 0x11, 0xed);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x19, 0x2a);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x29, 0x03);
+ tda18218_write_reg(fe, 0x19, 0x1a);
+ tda18218_write_reg(fe, 0x11, 0x13);
+ initbuf2[0] = 0x0a;
+ initbuf2[1] = 0xbe;
+ initbuf2[2] = 0x6e;
+ initbuf2[3] = 0x07;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x11, 0xed);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x19, 0x2a);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x19, 0x0a);
+ tda18218_write_reg(fe, 0x27, 0xc9);
+ tda18218_write_reg(fe, 0x11, 0x13);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xf0;
+ initbuf2[2] = 0x19;
+ initbuf2[3] = 0x00;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x29, 0x03);
+ tda18218_write_reg(fe, 0x2a, 0x00);
+ tda18218_write_reg(fe, 0x2a, 0x01);
+ tda18218_write_reg(fe, 0x2a, 0x02);
+ tda18218_write_reg(fe, 0x2a, 0x03);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x18, 0x19);
+ tda18218_write_reg(fe, 0x22, 0x9c);
+ tda18218_write_reg(fe, 0x1f, 0x58);
+ tda18218_write_reg(fe, 0x24, 0x0c);
+ tda18218_write_reg(fe, 0x1c, 0x88);
+ tda18218_write_reg(fe, 0x20, 0x10);
+ tda18218_write_reg(fe, 0x21, 0x4c);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x21, 0x48);
+ tda18218_write_reg(fe, 0x1f, 0x5b);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x59);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5a);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5f);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5d);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5e);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x20, 0x60);
+ tda18218_write_reg(fe, 0x23, 0x02);
+ tda18218_write_reg(fe, 0x20, 0xa0);
+ tda18218_write_reg(fe, 0x23, 0x09);
+ tda18218_write_reg(fe, 0x20, 0xe0);
+ tda18218_write_reg(fe, 0x23, 0x0c);
+ tda18218_write_reg(fe, 0x20, 0x40);
+ tda18218_write_reg(fe, 0x23, 0x01);
+ tda18218_write_reg(fe, 0x20, 0x80);
+ tda18218_write_reg(fe, 0x23, 0x08);
+ tda18218_write_reg(fe, 0x20, 0xc0);
+ tda18218_write_reg(fe, 0x23, 0x0b);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x22, 0x8c);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xb0;
+ initbuf2[2] = 0x59;
+ initbuf2[3] = 0x00;
+ //tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ initbuf2[0] = 0x1a;
+ initbuf2[1] = 0x0e;
+ initbuf2[2] = 0x2a;
+ initbuf2[3] = 0x98;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xb0;
+ initbuf2[2] = 0x59;
+ initbuf2[3] = 0x00;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ tda18218_write_reg(fe, 0x2d, 0x81);
+ tda18218_write_reg(fe, 0x29, 0x02);
+
+ return 0;
+}
+
+static int tda18218_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops tda18218_tuner_ops = {
+ .info = {
+ .name = "NXP TDA18218",
+ .frequency_min = TDA18218_MIN_FREQ,
+ .frequency_max = TDA18218_MAX_FREQ,
+ .frequency_step = TDA18218_STEP,
+ },
+
+ .release = tda18218_release,
+ .init = tda18218_init,
+
+ .set_params = tda18218_set_params,
+ .get_frequency = tda18218_get_frequency,
+ .get_bandwidth = tda18218_get_bandwidth,
+};
+
+struct dvb_frontend * tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg)
+{
+ struct tda18218_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct tda18218_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->i2c = i2c;
+
+ fe->tuner_priv = priv;
+
+ tda18218_read_regs(fe);
+ if (priv->tda18218_regs[0x00] != 0xc0) {
+ printk(KERN_WARNING "Device is not a TDA18218!\n");
+ kfree(priv);
+ return NULL;
+ }
+
+ printk(KERN_INFO "NXP TDA18218 successfully identified.\n");
+ memcpy(&fe->ops.tuner_ops, &tda18218_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ return fe;
+}
+EXPORT_SYMBOL(tda18218_attach);
+
+MODULE_DESCRIPTION("NXP TDA18218 silicon tuner driver");
+MODULE_AUTHOR("Lauris Ding <ld...@gmx.de>");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218.h /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.h
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218.h 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.h 2011-01-04 14:03:39.306000007 +0100
@@ -0,0 +1,44 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef TDA18218_H
+#define TDA18218_H
+
+#include "dvb_frontend.h"
+
+struct tda18218_config {
+ u8 i2c_address;
+};
+
+#if defined(CONFIG_MEDIA_TUNER_TDA18218) || (defined(CONFIG_MEDIA_TUNER_TDA18218_MODULE) && defined(MODULE))
+extern struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg);
+#else
+static inline struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif // CONFIG_MEDIA_TUNER_TDA18218
+
+#endif
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h 2011-01-04 14:04:36.744000011 +0100
@@ -0,0 +1,36 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef TDA18218_PRIV_H
+#define TDA18218_PRIV_H
+
+#define TDA18218_STEP 1000 /* 1 kHz */
+#define TDA18218_MIN_FREQ 174000000 /* 174 MHz */
+#define TDA18218_MAX_FREQ 864000000 /* 864 MHz */
+
+struct tda18218_priv {
+ u8 tda18218_regs[0x3b];
+ struct tda18218_config *cfg;
+ struct i2c_adapter *i2c;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#endif
diff -Nru linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c
--- linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c 2011-01-05 10:21:43.993000001 +0100
@@ -31,6 +31,7 @@
#include "tda18271.h"
#include "mxl5005s.h"
#include "mc44s803.h"
+#include "tda18218.h"

static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
@@ -272,7 +273,8 @@

while (i < num) {
if (msg[i].addr == af9015_af9013_config[0].demod_address ||
- msg[i].addr == af9015_af9013_config[1].demod_address) {
+ msg[i].addr == af9015_af9013_config[1].demod_address ||
+ msg[i].addr == 0x3a) {
addr = msg[i].buf[0] << 8;
addr += msg[i].buf[1];
mbox = msg[i].buf[2];
@@ -285,7 +287,8 @@

if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
req.cmd = READ_MEMORY;
else
req.cmd = READ_I2C;
@@ -300,7 +303,8 @@
} else if (msg[i].flags & I2C_M_RD) {
ret = -EINVAL;
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
goto error;
else
req.cmd = READ_I2C;
@@ -314,7 +318,8 @@
i += 1;
} else {
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
req.cmd = WRITE_MEMORY;
else
req.cmd = WRITE_I2C;
@@ -556,46 +561,6 @@
return ret;
}

-/* hash (and dump) eeprom */
-static int af9015_eeprom_hash(struct usb_device *udev)
-{
- static const unsigned int eeprom_size = 256;
- unsigned int reg;
- int ret;
- u8 val, *eeprom;
- struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
- eeprom = kmalloc(eeprom_size, GFP_KERNEL);
- if (eeprom == NULL)
- return -ENOMEM;
-
- for (reg = 0; reg < eeprom_size; reg++) {
- req.addr = reg;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto free;
- eeprom[reg] = val;
- }
-
- if (dvb_usb_af9015_debug & 0x01)
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
- eeprom_size);
-
- BUG_ON(eeprom_size % 4);
-
- af9015_config.eeprom_sum = 0;
- for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
- af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
- af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
- }
-
- deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
-
- ret = 0;
-free:
- kfree(eeprom);
- return ret;
-}

static int af9015_download_ir_table(struct dvb_usb_device *d)
{
@@ -733,132 +698,12 @@
return ret;
}

-struct af9015_setup {
- unsigned int id;
- struct dvb_usb_rc_key *rc_key_map;
- unsigned int rc_key_map_size;
- u8 *ir_table;
- unsigned int ir_table_size;
-};
-
-static const struct af9015_setup *af9015_setup_match(unsigned int id,
- const struct af9015_setup *table)
-{
- for (; table->rc_key_map; table++)
- if (table->id == id)
- return table;
- return NULL;
-}
-
-static const struct af9015_setup af9015_setup_modparam[] = {
- { AF9015_REMOTE_A_LINK_DTU_M,
- ir_codes_af9015_table_a_link, ARRAY_SIZE(ir_codes_af9015_table_a_link),
- af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
- { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- ir_codes_af9015_table_msi, ARRAY_SIZE(ir_codes_af9015_table_msi),
- af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
- { AF9015_REMOTE_MYGICTV_U718,
- ir_codes_af9015_table_mygictv, ARRAY_SIZE(ir_codes_af9015_table_mygictv),
- af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
- { AF9015_REMOTE_DIGITTRADE_DVB_T,
- ir_codes_af9015_table_digittrade, ARRAY_SIZE(ir_codes_af9015_table_digittrade),
- af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
- { AF9015_REMOTE_AVERMEDIA_KS,
- ir_codes_af9015_table_avermedia, ARRAY_SIZE(ir_codes_af9015_table_avermedia),
- af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
- { }
-};
-
-/* don't add new entries here anymore, use hashes instead */
-static const struct af9015_setup af9015_setup_usbids[] = {
- { USB_VID_LEADTEK,
- ir_codes_af9015_table_leadtek, ARRAY_SIZE(ir_codes_af9015_table_leadtek),
- af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
- { USB_VID_VISIONPLUS,
- ir_codes_af9015_table_twinhan, ARRAY_SIZE(ir_codes_af9015_table_twinhan),
- af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
- { USB_VID_KWORLD_2, /* TODO: use correct rc keys */
- ir_codes_af9015_table_twinhan, ARRAY_SIZE(ir_codes_af9015_table_twinhan),
- af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
- { USB_VID_AVERMEDIA,
- ir_codes_af9015_table_avermedia, ARRAY_SIZE(ir_codes_af9015_table_avermedia),
- af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
- { USB_VID_MSI_2,
- ir_codes_af9015_table_msi_digivox_iii, ARRAY_SIZE(ir_codes_af9015_table_msi_digivox_iii),
- af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
- { }
-};
-
-static const struct af9015_setup af9015_setup_hashes[] = {
- { 0xb8feb708,
- ir_codes_af9015_table_msi, ARRAY_SIZE(ir_codes_af9015_table_msi),
- af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
- { 0xa3703d00,
- ir_codes_af9015_table_a_link, ARRAY_SIZE(ir_codes_af9015_table_a_link),
- af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
- { 0x9b7dc64e,
- ir_codes_af9015_table_mygictv, ARRAY_SIZE(ir_codes_af9015_table_mygictv),
- af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
- { }
-};
-
-static void af9015_set_remote_config(struct usb_device *udev,
- struct dvb_usb_device_properties *props)
-{
- const struct af9015_setup *table = NULL;
-
- if (dvb_usb_af9015_remote) {
- /* load remote defined as module param */
- table = af9015_setup_match(dvb_usb_af9015_remote,
- af9015_setup_modparam);
- } else {
- u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
-
- table = af9015_setup_match(af9015_config.eeprom_sum,
- af9015_setup_hashes);
-
- if (!table && vendor == USB_VID_AFATECH) {
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used.
- DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
- */
- char manufacturer[10];
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- table = af9015_setup_match(
- AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- af9015_setup_modparam);
- } else if (udev->descriptor.idProduct ==
- cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
- table = &(const struct af9015_setup){ 0,
- ir_codes_af9015_table_trekstor,
- ARRAY_SIZE(ir_codes_af9015_table_trekstor),
- af9015_ir_table_trekstor,
- ARRAY_SIZE(af9015_ir_table_trekstor)
- };
- }
- } else if (!table)
- table = af9015_setup_match(vendor, af9015_setup_usbids);
- }
-
- if (table) {
- props->rc_key_map = table->rc_key_map;
- props->rc_key_map_size = table->rc_key_map_size;
- af9015_config.ir_table = table->ir_table;
- af9015_config.ir_table_size = table->ir_table_size;
- }
-}
-
static int af9015_read_config(struct usb_device *udev)
{
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+ char manufacturer[10];

/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
@@ -871,17 +716,158 @@
if (ret)
goto error;

- ret = af9015_eeprom_hash(udev);
- if (ret)
- goto error;
-
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
- } else
- af9015_set_remote_config(udev, &af9015_properties[i]);
+ } else if (dvb_usb_af9015_remote) {
+ /* load remote defined as module param */
+ switch (dvb_usb_af9015_remote) {
+ case AF9015_REMOTE_A_LINK_DTU_M:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_a_link;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_a_link);
+ af9015_config.ir_table = af9015_ir_table_a_link;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_a_link);
+ break;
+ case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi);
+ af9015_config.ir_table = af9015_ir_table_msi;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi);
+ break;
+ case AF9015_REMOTE_MYGICTV_U718:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_mygictv;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_mygictv);
+ af9015_config.ir_table =
+ af9015_ir_table_mygictv;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_mygictv);
+ break;
+ case AF9015_REMOTE_DIGITTRADE_DVB_T:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_digittrade;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_digittrade);
+ af9015_config.ir_table =
+ af9015_ir_table_digittrade;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_digittrade);
+ break;
+ case AF9015_REMOTE_AVERMEDIA_KS:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_avermedia;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_avermedia);
+ af9015_config.ir_table =
+ af9015_ir_table_avermedia_ks;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_avermedia_ks);
+ break;
+ }
+ } else {
+ switch (le16_to_cpu(udev->descriptor.idVendor)) {
+ case USB_VID_LEADTEK:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_leadtek;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_leadtek);
+ af9015_config.ir_table =
+ af9015_ir_table_leadtek;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_leadtek);
+ break;
+ case USB_VID_VISIONPLUS:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_twinhan;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_twinhan);
+ af9015_config.ir_table =
+ af9015_ir_table_twinhan;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_twinhan);
+ break;
+ case USB_VID_KWORLD_2:
+ /* TODO: use correct rc keys */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_twinhan;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_twinhan);
+ af9015_config.ir_table = af9015_ir_table_kworld;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_kworld);
+ break;
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used. */
+ case USB_VID_AFATECH:
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("Geniatech", manufacturer)) {
+ /* iManufacturer 1 Geniatech
+ iProduct 2 AF9015 */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_mygictv;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_mygictv);
+ af9015_config.ir_table =
+ af9015_ir_table_mygictv;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_mygictv);
+ } else if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi);
+ af9015_config.ir_table =
+ af9015_ir_table_msi;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi);
+ } else if (udev->descriptor.idProduct ==
+ cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_trekstor;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_trekstor);
+ af9015_config.ir_table =
+ af9015_ir_table_trekstor;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_trekstor);
+ }
+ break;
+ case USB_VID_AVERMEDIA:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_avermedia;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_avermedia);
+ af9015_config.ir_table =
+ af9015_ir_table_avermedia;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_avermedia);
+ break;
+ case USB_VID_MSI_2:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi_digivox_iii;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi_digivox_iii);
+ af9015_config.ir_table =
+ af9015_ir_table_msi_digivox_iii;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
+ break;
+ }
+ }
}

/* TS mode - one or two receivers */
@@ -992,6 +978,7 @@
case AF9013_TUNER_MT2060_2:
case AF9013_TUNER_TDA18271:
case AF9013_TUNER_QT1010A:
+ case AF9013_TUNER_TDA18218:
af9015_af9013_config[i].rf_spec_inv = 1;
break;
case AF9013_TUNER_MXL5003D:
@@ -1003,9 +990,6 @@
af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
af9015_af9013_config[i].rf_spec_inv = 1;
break;
- case AF9013_TUNER_TDA18218:
- warn("tuner NXP TDA18218 not supported yet");
- return -ENODEV;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
@@ -1208,6 +1192,10 @@
.dig_out = 1,
};

+static struct tda18218_config af9015_tda18218_config = {
+ .i2c_address = 0xc0,
+};
+
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct af9015_state *state = adap->dev->priv;
@@ -1255,6 +1243,10 @@
ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
+ case AF9013_TUNER_TDA18218:
+ ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap,
+ &af9015_tda18218_config) == NULL ? -ENODEV : 0;
+ break;
case AF9013_TUNER_UNKNOWN:
default:
ret = -ENODEV;
@@ -1299,6 +1291,7 @@
{USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
/* 30 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)},
+ {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1607,8 +1600,8 @@
.warm_ids = {NULL},
},
{
- .name = "Leadtek WinFast DTV2000DS",
- .cold_ids = {&af9015_usb_table[29], NULL},
+ .name = "TerraTec Cinergy T Stick RC",
+ .cold_ids = {&af9015_usb_table[32], NULL},
.warm_ids = {NULL},
},
{
diff -Nru linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2011-01-04 14:45:53.600000024 +0100
@@ -133,6 +133,7 @@
#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055
#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069
+#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097
#define USB_PID_TWINHAN_VP7041_COLD 0x3201
#define USB_PID_TWINHAN_VP7041_WARM 0x3202
#define USB_PID_TWINHAN_VP7020_COLD 0x3203
diff -Nru linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c
--- linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c 2011-01-04 14:48:59.535000023 +0100
@@ -487,6 +487,20 @@
break;
}
}
+ else if(state->config.tuner == AF9013_TUNER_TDA18218) {
+ switch (bw) {
+ case BANDWIDTH_6_MHZ:
+ if_sample_freq = 3000000; /* 3 MHz */
+ break;
+ case BANDWIDTH_7_MHZ:
+ if_sample_freq = 3500000; /* 3.5 MHz */
+ break;
+ case BANDWIDTH_8_MHZ:
+ default:
+ if_sample_freq = 4000000; /* 4 MHz */
+ break;
+ }
+ }

while (if_sample_freq > (adc_freq / 2))
if_sample_freq = if_sample_freq - adc_freq;
@@ -1389,6 +1403,7 @@
init = tuner_init_mt2060_2;
break;
case AF9013_TUNER_TDA18271:
+ case AF9013_TUNER_TDA18218:
len = ARRAY_SIZE(tuner_init_tda18271);
init = tuner_init_tda18271;
break;
diff -Nru linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h
--- linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h 2011-01-04 14:52:02.621000024 +0100
@@ -789,8 +789,9 @@
{ 0x9bd9, 0, 8, 0x08 },
};

-/* NXP TDA18271 tuner init
- AF9013_TUNER_TDA18271 = 156 */
+/* NXP TDA18271 & TDA18218 tuner init
+ AF9013_TUNER_TDA18271 = 156
+ AF9013_TUNER_TDA18218 = 179 */
static struct regdesc tuner_init_tda18271[] = {
{ 0x9bd5, 0, 8, 0x01 },
{ 0x9bd6, 0, 8, 0x04 },
</pre>

[[Category: DVB-T USB Devices]]

TerraTec Cinergy T USB RC

2011-01-05T09:29:38Z

Wirbel:

{{Device_List_Medium_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Medium_Detail/Row
|selatt1=did
|selval1=terratec-trc-mk2
}}
}}

=== Version 2 AF9015 ===
USB ID: 0ccd:0097
Manufacturer: NEWMI

There is a patch available to support this device:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html

However, this patch doesnt fit anymore perfectly on 2.6.35.4 due to some changes on IR and there is no official support in dvb-hg; so this patch needs to be adapted and applied.
Testing afterwards can be done as usual, for example with tzap, scan or w_scan. Needs also firmware dvb-usb-af9015.fw.

Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.

After applying patch and loading dvb-usb-af9015 you should see the following:
<pre>
usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
</pre>

=== [http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html patch] with changes to linux-2.6.35.4 ===
<pre>
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/Kconfig /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Kconfig
--- linux-2.6.35.4/drivers/media/common/tuners/Kconfig 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Kconfig 2011-01-04 13:59:07.642000010 +0100
@@ -179,4 +179,11 @@
help
A driver for the silicon tuner MAX2165 from Maxim.

+config MEDIA_TUNER_TDA18218
+ tristate "NXP TDA18218 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ A driver for the silicon tuner TDA18218 from NXP.
+
endif # MEDIA_TUNER_CUSTOMISE
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/Makefile /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Makefile
--- linux-2.6.35.4/drivers/media/common/tuners/Makefile 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Makefile 2011-01-04 13:59:50.733000011 +0100
@@ -24,6 +24,7 @@
obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o
obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
+obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o

EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218.c /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.c
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218.c 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.c 2011-01-04 15:22:54.068000023 +0100
@@ -0,0 +1,471 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "tda18218.h"
+//#include "compat.h"
+#include "tda18218_priv.h"
+
+static int tda18218_write_reg(struct dvb_frontend *fe, u8 reg, u8 val)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,
+ .buf = buf, .len = 2 };
+ int ret;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ /* write register */
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 1)
+ printk(KERN_WARNING "I2C write failed ret: %d reg: %02x\n", ret, reg);
+
+ return (ret == 1 ? 0 : ret);
+}
+
+static int tda18218_write_regs(struct dvb_frontend *fe, u8 reg,
+ u8 *val, u8 len)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 buf[1+len];
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf };
+
+ int ret;
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (ret != 1)
+ printk(KERN_WARNING "I2C write failed ret: %d reg: %02x len: %d\n", ret, reg, len);
+
+ return (ret == 1 ? 0 : ret);
+}
+
+/*static int tda18218_read_reg(struct tda18218_priv *priv, u16 reg, u8 *val)
+{
+ u8 obuf[3] = { reg >> 8, reg & 0xff, 0 };
+ u8 ibuf[1];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = 0x3a,
+ .flags = 0,
+ .len = sizeof(obuf),
+ .buf = obuf
+ }, {
+ .addr = 0x3a,
+ .flags = I2C_M_RD,
+ .len = sizeof(ibuf),
+ .buf = ibuf
+ }
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "I2C read failed reg:%04x\n", reg);
+ return -EREMOTEIO;
+ }
+ *val = ibuf[0];
+ return 0;
+}*/
+
+static int tda18218_read_regs(struct dvb_frontend *fe)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 *regs = priv->tda18218_regs;
+ u8 buf = 0x00;
+ int ret;
+ //int i;
+ struct i2c_msg msg[] = {
+ { .addr = 0xc0, .flags = 0,
+ .buf = &buf, .len = 1 },
+ { .addr = 0xc0, .flags = I2C_M_RD,
+ .buf = regs, .len = 59 }
+ };
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ /* read all registers */
+ ret = i2c_transfer(priv->i2c, msg, 2);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 2)
+ printk(KERN_WARNING "I2C read failed ret: %d\n", ret);
+
+ /*for(i = 0; i <= 58; i++)
+ printk("Register %d: %02x\n", i, 0xff & regs[i]);*/
+
+ return (ret == 2 ? 0 : ret);
+}
+
+static int tda18218_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 *regs = priv->tda18218_regs;
+ u8 Fc, BP;
+ int i, ret;
+ u16 if1, bw;
+ u32 freq;
+
+ u8 paramsbuf[4][6] = {
+ { 0x03, 0x1a },
+ { 0x04, 0x0a },
+ { 0x01, 0x0f },
+ { 0x01, 0x0f },
+ };
+
+ u8 agcbuf[][2] = {
+ { 0x1a, 0x0e },
+ { 0x20, 0x60 },
+ { 0x23, 0x02 },
+ { 0x20, 0xa0 },
+ { 0x23, 0x09 },
+ { 0x20, 0xe0 },
+ { 0x23, 0x0c },
+ { 0x20, 0x40 },
+ { 0x23, 0x01 },
+ { 0x20, 0x80 },
+ { 0x23, 0x08 },
+ { 0x20, 0xc0 },
+ { 0x23, 0x0b },
+ { 0x24, 0x1c },
+ { 0x24, 0x0c },
+ };
+
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ bw = 6000;
+ Fc = 0;
+ break;
+ case BANDWIDTH_7_MHZ:
+ bw = 7000;
+ Fc = 1;
+ break;
+ case BANDWIDTH_8_MHZ:
+ bw = 8000;
+ Fc = 2;
+ break;
+ default:
+ printk(KERN_WARNING "Invalid bandwidth");
+ return -EINVAL;
+ }
+
+ if1 = bw / 2;
+
+ if((params->frequency >= 174000000) && (params->frequency < 188000000)) {
+ BP = 3;
+ }
+ else if((params->frequency >= 188000000) && (params->frequency < 253000000)) {
+ BP = 4;
+ }
+ else if((params->frequency >= 253000000) && (params->frequency < 343000000)) {
+ BP = 5;
+ }
+ else if((params->frequency >= 343000000) && (params->frequency <= 870000000)) {
+ BP = 6;
+ }
+ else {
+ printk(KERN_WARNING "Frequency out of range");
+ return -EINVAL;
+ }
+
+ freq = params->frequency;
+ freq /= 1000;
+ freq +=if1;
+ freq *= 16;
+
+ tda18218_read_regs(fe);
+
+ paramsbuf[0][2] = regs[0x1a] | BP;
+ paramsbuf[0][3] = regs[0x1b] & ~3;
+ paramsbuf[0][3] = regs[0x1b] | Fc;
+ paramsbuf[0][4] = regs[0x1c] | 0x0a;
+
+ paramsbuf[1][2] = freq >> 16;
+ paramsbuf[1][3] = freq >> 8;
+ paramsbuf[1][4] = (freq & 0xf0) | (regs[0x0c] & 0x0f);
+ paramsbuf[1][5] = 0xff;
+ paramsbuf[2][2] = regs[0x0f] | 0x40;
+ paramsbuf[3][2] = 0x09;
+
+ tda18218_write_reg(fe, 0x04, 0x03);
+
+ for(i = 0; i < ARRAY_SIZE(paramsbuf); i++) {
+
+ /* write registers */
+ ret = tda18218_write_regs(fe, paramsbuf[i][1], &paramsbuf[i][2], paramsbuf[i][0]);
+
+ if (ret)
+ goto error;
+ }
+ for(i = 0; i < ARRAY_SIZE(agcbuf); i++) {
+ tda18218_write_reg(fe, agcbuf[i][0], agcbuf[i][1]);
+ }
+
+ //tda18218_write_reg(fe, 0x03, 0x00);
+ //tda18218_write_reg(fe, 0x04, 0x00);
+ //tda18218_write_reg(fe, 0x20, 0xc7);
+
+ msleep(60);
+ i = 0;
+ while(i < 10) {
+ tda18218_read_regs(fe);
+ if((regs[0x01] & 0x60) == 0x60)
+ printk(KERN_INFO "We've got a lock!"); break;
+ msleep(20);
+ i++;
+ }
+
+ priv->bandwidth = params->u.ofdm.bandwidth;
+ priv->frequency = params->frequency;
+ return 0;
+error:
+ return ret;
+}
+
+static int tda18218_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int tda18218_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+static int tda18218_init(struct dvb_frontend *fe)
+{
+ //struct tda18218_priv *priv = fe->tuner_priv;
+ //u8 *regs = priv->tda18218_regs;
+ int i;
+ int ret;
+
+ u8 initbuf[][18] = {
+ { 0x10, 0x05, 0x00, 0x00, 0xd0, 0x00, 0x40, 0x00, 0x00, 0x07, 0xff, 0x84, 0x09, 0x00, 0x13, 0x00, 0x00, 0x01 },
+ { 0x0b, 0x15, 0x84, 0x09, 0xf0, 0x19, 0x0a, 0x0e, 0x29, 0x98, 0x00, 0x00, 0x58 },
+ { 0x10, 0x24, 0x0c, 0x48, 0x85, 0xc9, 0xa7, 0x00, 0x00, 0x00, 0x30, 0x81, 0x80, 0x00, 0x39, 0x00, 0x8a, 0x00 },
+ { 0x07, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, 0xf6 },
+ };
+
+ u8 initbuf2[4];
+
+ for(i = 0; i < ARRAY_SIZE(initbuf); i++) {
+
+ /* write registers */
+ ret = tda18218_write_regs(fe, initbuf[i][1], &initbuf[i][2], initbuf[i][0]);
+
+ if (ret != 0) {
+ printk(KERN_ERR "init: ERROR: i2c_transfer returned: %d\n", ret);
+ return -EREMOTEIO;
+ }
+ if(i == 1) {
+ tda18218_write_reg(fe, 0x22, 0x8c);
+ }
+ }
+
+ tda18218_write_reg(fe, 0x05, 0x80);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x05, 0x20);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x27, 0xde);
+ tda18218_write_reg(fe, 0x17, 0xf8);
+ tda18218_write_reg(fe, 0x18, 0x0f);
+ tda18218_write_reg(fe, 0x1c, 0x8b);
+ tda18218_write_reg(fe, 0x29, 0x02);
+ tda18218_write_reg(fe, 0x19, 0x1a);
+ tda18218_write_reg(fe, 0x11, 0x13);
+
+ initbuf2[0] = 0x0a;
+ initbuf2[1] = 0x5c;
+ initbuf2[2] = 0xc6;
+ initbuf2[3] = 0x07;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x05, 0x40);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x05, 0x20);
+ tda18218_write_reg(fe, 0x11, 0xed);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x19, 0x2a);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x29, 0x03);
+ tda18218_write_reg(fe, 0x19, 0x1a);
+ tda18218_write_reg(fe, 0x11, 0x13);
+ initbuf2[0] = 0x0a;
+ initbuf2[1] = 0xbe;
+ initbuf2[2] = 0x6e;
+ initbuf2[3] = 0x07;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x11, 0xed);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x19, 0x2a);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x19, 0x0a);
+ tda18218_write_reg(fe, 0x27, 0xc9);
+ tda18218_write_reg(fe, 0x11, 0x13);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xf0;
+ initbuf2[2] = 0x19;
+ initbuf2[3] = 0x00;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x29, 0x03);
+ tda18218_write_reg(fe, 0x2a, 0x00);
+ tda18218_write_reg(fe, 0x2a, 0x01);
+ tda18218_write_reg(fe, 0x2a, 0x02);
+ tda18218_write_reg(fe, 0x2a, 0x03);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x18, 0x19);
+ tda18218_write_reg(fe, 0x22, 0x9c);
+ tda18218_write_reg(fe, 0x1f, 0x58);
+ tda18218_write_reg(fe, 0x24, 0x0c);
+ tda18218_write_reg(fe, 0x1c, 0x88);
+ tda18218_write_reg(fe, 0x20, 0x10);
+ tda18218_write_reg(fe, 0x21, 0x4c);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x21, 0x48);
+ tda18218_write_reg(fe, 0x1f, 0x5b);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x59);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5a);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5f);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5d);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5e);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x20, 0x60);
+ tda18218_write_reg(fe, 0x23, 0x02);
+ tda18218_write_reg(fe, 0x20, 0xa0);
+ tda18218_write_reg(fe, 0x23, 0x09);
+ tda18218_write_reg(fe, 0x20, 0xe0);
+ tda18218_write_reg(fe, 0x23, 0x0c);
+ tda18218_write_reg(fe, 0x20, 0x40);
+ tda18218_write_reg(fe, 0x23, 0x01);
+ tda18218_write_reg(fe, 0x20, 0x80);
+ tda18218_write_reg(fe, 0x23, 0x08);
+ tda18218_write_reg(fe, 0x20, 0xc0);
+ tda18218_write_reg(fe, 0x23, 0x0b);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x22, 0x8c);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xb0;
+ initbuf2[2] = 0x59;
+ initbuf2[3] = 0x00;
+ //tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ initbuf2[0] = 0x1a;
+ initbuf2[1] = 0x0e;
+ initbuf2[2] = 0x2a;
+ initbuf2[3] = 0x98;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xb0;
+ initbuf2[2] = 0x59;
+ initbuf2[3] = 0x00;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ tda18218_write_reg(fe, 0x2d, 0x81);
+ tda18218_write_reg(fe, 0x29, 0x02);
+
+ return 0;
+}
+
+static int tda18218_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops tda18218_tuner_ops = {
+ .info = {
+ .name = "NXP TDA18218",
+ .frequency_min = TDA18218_MIN_FREQ,
+ .frequency_max = TDA18218_MAX_FREQ,
+ .frequency_step = TDA18218_STEP,
+ },
+
+ .release = tda18218_release,
+ .init = tda18218_init,
+
+ .set_params = tda18218_set_params,
+ .get_frequency = tda18218_get_frequency,
+ .get_bandwidth = tda18218_get_bandwidth,
+};
+
+struct dvb_frontend * tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg)
+{
+ struct tda18218_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct tda18218_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->i2c = i2c;
+
+ fe->tuner_priv = priv;
+
+ tda18218_read_regs(fe);
+ if (priv->tda18218_regs[0x00] != 0xc0) {
+ printk(KERN_WARNING "Device is not a TDA18218!\n");
+ kfree(priv);
+ return NULL;
+ }
+
+ printk(KERN_INFO "NXP TDA18218 successfully identified.\n");
+ memcpy(&fe->ops.tuner_ops, &tda18218_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ return fe;
+}
+EXPORT_SYMBOL(tda18218_attach);
+
+MODULE_DESCRIPTION("NXP TDA18218 silicon tuner driver");
+MODULE_AUTHOR("Lauris Ding <ld...@gmx.de>");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218.h /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.h
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218.h 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.h 2011-01-04 14:03:39.306000007 +0100
@@ -0,0 +1,44 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef TDA18218_H
+#define TDA18218_H
+
+#include "dvb_frontend.h"
+
+struct tda18218_config {
+ u8 i2c_address;
+};
+
+#if defined(CONFIG_MEDIA_TUNER_TDA18218) || (defined(CONFIG_MEDIA_TUNER_TDA18218_MODULE) && defined(MODULE))
+extern struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg);
+#else
+static inline struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif // CONFIG_MEDIA_TUNER_TDA18218
+
+#endif
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h 2011-01-04 14:04:36.744000011 +0100
@@ -0,0 +1,36 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef TDA18218_PRIV_H
+#define TDA18218_PRIV_H
+
+#define TDA18218_STEP 1000 /* 1 kHz */
+#define TDA18218_MIN_FREQ 174000000 /* 174 MHz */
+#define TDA18218_MAX_FREQ 864000000 /* 864 MHz */
+
+struct tda18218_priv {
+ u8 tda18218_regs[0x3b];
+ struct tda18218_config *cfg;
+ struct i2c_adapter *i2c;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#endif
diff -Nru linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c
--- linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c 2011-01-05 10:21:43.993000001 +0100
@@ -31,6 +31,7 @@
#include "tda18271.h"
#include "mxl5005s.h"
#include "mc44s803.h"
+#include "tda18218.h"

static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
@@ -272,7 +273,8 @@

while (i < num) {
if (msg[i].addr == af9015_af9013_config[0].demod_address ||
- msg[i].addr == af9015_af9013_config[1].demod_address) {
+ msg[i].addr == af9015_af9013_config[1].demod_address ||
+ msg[i].addr == 0x3a) {
addr = msg[i].buf[0] << 8;
addr += msg[i].buf[1];
mbox = msg[i].buf[2];
@@ -285,7 +287,8 @@

if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
req.cmd = READ_MEMORY;
else
req.cmd = READ_I2C;
@@ -300,7 +303,8 @@
} else if (msg[i].flags & I2C_M_RD) {
ret = -EINVAL;
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
goto error;
else
req.cmd = READ_I2C;
@@ -314,7 +318,8 @@
i += 1;
} else {
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
req.cmd = WRITE_MEMORY;
else
req.cmd = WRITE_I2C;
@@ -556,46 +561,6 @@
return ret;
}

-/* hash (and dump) eeprom */
-static int af9015_eeprom_hash(struct usb_device *udev)
-{
- static const unsigned int eeprom_size = 256;
- unsigned int reg;
- int ret;
- u8 val, *eeprom;
- struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
- eeprom = kmalloc(eeprom_size, GFP_KERNEL);
- if (eeprom == NULL)
- return -ENOMEM;
-
- for (reg = 0; reg < eeprom_size; reg++) {
- req.addr = reg;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto free;
- eeprom[reg] = val;
- }
-
- if (dvb_usb_af9015_debug & 0x01)
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
- eeprom_size);
-
- BUG_ON(eeprom_size % 4);
-
- af9015_config.eeprom_sum = 0;
- for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
- af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
- af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
- }
-
- deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
-
- ret = 0;
-free:
- kfree(eeprom);
- return ret;
-}

static int af9015_download_ir_table(struct dvb_usb_device *d)
{
@@ -733,132 +698,12 @@
return ret;
}

-struct af9015_setup {
- unsigned int id;
- struct dvb_usb_rc_key *rc_key_map;
- unsigned int rc_key_map_size;
- u8 *ir_table;
- unsigned int ir_table_size;
-};
-
-static const struct af9015_setup *af9015_setup_match(unsigned int id,
- const struct af9015_setup *table)
-{
- for (; table->rc_key_map; table++)
- if (table->id == id)
- return table;
- return NULL;
-}
-
-static const struct af9015_setup af9015_setup_modparam[] = {
- { AF9015_REMOTE_A_LINK_DTU_M,
- ir_codes_af9015_table_a_link, ARRAY_SIZE(ir_codes_af9015_table_a_link),
- af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
- { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- ir_codes_af9015_table_msi, ARRAY_SIZE(ir_codes_af9015_table_msi),
- af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
- { AF9015_REMOTE_MYGICTV_U718,
- ir_codes_af9015_table_mygictv, ARRAY_SIZE(ir_codes_af9015_table_mygictv),
- af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
- { AF9015_REMOTE_DIGITTRADE_DVB_T,
- ir_codes_af9015_table_digittrade, ARRAY_SIZE(ir_codes_af9015_table_digittrade),
- af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
- { AF9015_REMOTE_AVERMEDIA_KS,
- ir_codes_af9015_table_avermedia, ARRAY_SIZE(ir_codes_af9015_table_avermedia),
- af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
- { }
-};
-
-/* don't add new entries here anymore, use hashes instead */
-static const struct af9015_setup af9015_setup_usbids[] = {
- { USB_VID_LEADTEK,
- ir_codes_af9015_table_leadtek, ARRAY_SIZE(ir_codes_af9015_table_leadtek),
- af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
- { USB_VID_VISIONPLUS,
- ir_codes_af9015_table_twinhan, ARRAY_SIZE(ir_codes_af9015_table_twinhan),
- af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
- { USB_VID_KWORLD_2, /* TODO: use correct rc keys */
- ir_codes_af9015_table_twinhan, ARRAY_SIZE(ir_codes_af9015_table_twinhan),
- af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
- { USB_VID_AVERMEDIA,
- ir_codes_af9015_table_avermedia, ARRAY_SIZE(ir_codes_af9015_table_avermedia),
- af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
- { USB_VID_MSI_2,
- ir_codes_af9015_table_msi_digivox_iii, ARRAY_SIZE(ir_codes_af9015_table_msi_digivox_iii),
- af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
- { }
-};
-
-static const struct af9015_setup af9015_setup_hashes[] = {
- { 0xb8feb708,
- ir_codes_af9015_table_msi, ARRAY_SIZE(ir_codes_af9015_table_msi),
- af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
- { 0xa3703d00,
- ir_codes_af9015_table_a_link, ARRAY_SIZE(ir_codes_af9015_table_a_link),
- af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
- { 0x9b7dc64e,
- ir_codes_af9015_table_mygictv, ARRAY_SIZE(ir_codes_af9015_table_mygictv),
- af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
- { }
-};
-
-static void af9015_set_remote_config(struct usb_device *udev,
- struct dvb_usb_device_properties *props)
-{
- const struct af9015_setup *table = NULL;
-
- if (dvb_usb_af9015_remote) {
- /* load remote defined as module param */
- table = af9015_setup_match(dvb_usb_af9015_remote,
- af9015_setup_modparam);
- } else {
- u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
-
- table = af9015_setup_match(af9015_config.eeprom_sum,
- af9015_setup_hashes);
-
- if (!table && vendor == USB_VID_AFATECH) {
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used.
- DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
- */
- char manufacturer[10];
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- table = af9015_setup_match(
- AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- af9015_setup_modparam);
- } else if (udev->descriptor.idProduct ==
- cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
- table = &(const struct af9015_setup){ 0,
- ir_codes_af9015_table_trekstor,
- ARRAY_SIZE(ir_codes_af9015_table_trekstor),
- af9015_ir_table_trekstor,
- ARRAY_SIZE(af9015_ir_table_trekstor)
- };
- }
- } else if (!table)
- table = af9015_setup_match(vendor, af9015_setup_usbids);
- }
-
- if (table) {
- props->rc_key_map = table->rc_key_map;
- props->rc_key_map_size = table->rc_key_map_size;
- af9015_config.ir_table = table->ir_table;
- af9015_config.ir_table_size = table->ir_table_size;
- }
-}
-
static int af9015_read_config(struct usb_device *udev)
{
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+ char manufacturer[10];

/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
@@ -871,17 +716,158 @@
if (ret)
goto error;

- ret = af9015_eeprom_hash(udev);
- if (ret)
- goto error;
-
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
- } else
- af9015_set_remote_config(udev, &af9015_properties[i]);
+ } else if (dvb_usb_af9015_remote) {
+ /* load remote defined as module param */
+ switch (dvb_usb_af9015_remote) {
+ case AF9015_REMOTE_A_LINK_DTU_M:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_a_link;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_a_link);
+ af9015_config.ir_table = af9015_ir_table_a_link;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_a_link);
+ break;
+ case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi);
+ af9015_config.ir_table = af9015_ir_table_msi;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi);
+ break;
+ case AF9015_REMOTE_MYGICTV_U718:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_mygictv;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_mygictv);
+ af9015_config.ir_table =
+ af9015_ir_table_mygictv;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_mygictv);
+ break;
+ case AF9015_REMOTE_DIGITTRADE_DVB_T:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_digittrade;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_digittrade);
+ af9015_config.ir_table =
+ af9015_ir_table_digittrade;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_digittrade);
+ break;
+ case AF9015_REMOTE_AVERMEDIA_KS:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_avermedia;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_avermedia);
+ af9015_config.ir_table =
+ af9015_ir_table_avermedia_ks;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_avermedia_ks);
+ break;
+ }
+ } else {
+ switch (le16_to_cpu(udev->descriptor.idVendor)) {
+ case USB_VID_LEADTEK:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_leadtek;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_leadtek);
+ af9015_config.ir_table =
+ af9015_ir_table_leadtek;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_leadtek);
+ break;
+ case USB_VID_VISIONPLUS:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_twinhan;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_twinhan);
+ af9015_config.ir_table =
+ af9015_ir_table_twinhan;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_twinhan);
+ break;
+ case USB_VID_KWORLD_2:
+ /* TODO: use correct rc keys */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_twinhan;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_twinhan);
+ af9015_config.ir_table = af9015_ir_table_kworld;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_kworld);
+ break;
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used. */
+ case USB_VID_AFATECH:
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("Geniatech", manufacturer)) {
+ /* iManufacturer 1 Geniatech
+ iProduct 2 AF9015 */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_mygictv;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_mygictv);
+ af9015_config.ir_table =
+ af9015_ir_table_mygictv;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_mygictv);
+ } else if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi);
+ af9015_config.ir_table =
+ af9015_ir_table_msi;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi);
+ } else if (udev->descriptor.idProduct ==
+ cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_trekstor;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_trekstor);
+ af9015_config.ir_table =
+ af9015_ir_table_trekstor;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_trekstor);
+ }
+ break;
+ case USB_VID_AVERMEDIA:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_avermedia;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_avermedia);
+ af9015_config.ir_table =
+ af9015_ir_table_avermedia;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_avermedia);
+ break;
+ case USB_VID_MSI_2:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi_digivox_iii;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi_digivox_iii);
+ af9015_config.ir_table =
+ af9015_ir_table_msi_digivox_iii;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
+ break;
+ }
+ }
}

/* TS mode - one or two receivers */
@@ -992,6 +978,7 @@
case AF9013_TUNER_MT2060_2:
case AF9013_TUNER_TDA18271:
case AF9013_TUNER_QT1010A:
+ case AF9013_TUNER_TDA18218:
af9015_af9013_config[i].rf_spec_inv = 1;
break;
case AF9013_TUNER_MXL5003D:
@@ -1003,9 +990,6 @@
af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
af9015_af9013_config[i].rf_spec_inv = 1;
break;
- case AF9013_TUNER_TDA18218:
- warn("tuner NXP TDA18218 not supported yet");
- return -ENODEV;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
@@ -1208,6 +1192,10 @@
.dig_out = 1,
};

+static struct tda18218_config af9015_tda18218_config = {
+ .i2c_address = 0xc0,
+};
+
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct af9015_state *state = adap->dev->priv;
@@ -1255,6 +1243,10 @@
ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
+ case AF9013_TUNER_TDA18218:
+ ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap,
+ &af9015_tda18218_config) == NULL ? -ENODEV : 0;
+ break;
case AF9013_TUNER_UNKNOWN:
default:
ret = -ENODEV;
@@ -1299,6 +1291,7 @@
{USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
/* 30 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)},
+ {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1607,8 +1600,8 @@
.warm_ids = {NULL},
},
{
- .name = "Leadtek WinFast DTV2000DS",
- .cold_ids = {&af9015_usb_table[29], NULL},
+ .name = "TerraTec Cinergy T Stick RC",
+ .cold_ids = {&af9015_usb_table[32], NULL},
.warm_ids = {NULL},
},
{
diff -Nru linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2011-01-04 14:45:53.600000024 +0100
@@ -133,6 +133,7 @@
#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055
#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069
+#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097
#define USB_PID_TWINHAN_VP7041_COLD 0x3201
#define USB_PID_TWINHAN_VP7041_WARM 0x3202
#define USB_PID_TWINHAN_VP7020_COLD 0x3203
diff -Nru linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c
--- linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c 2011-01-04 14:48:59.535000023 +0100
@@ -487,6 +487,20 @@
break;
}
}
+ else if(state->config.tuner == AF9013_TUNER_TDA18218) {
+ switch (bw) {
+ case BANDWIDTH_6_MHZ:
+ if_sample_freq = 3000000; /* 3 MHz */
+ break;
+ case BANDWIDTH_7_MHZ:
+ if_sample_freq = 3500000; /* 3.5 MHz */
+ break;
+ case BANDWIDTH_8_MHZ:
+ default:
+ if_sample_freq = 4000000; /* 4 MHz */
+ break;
+ }
+ }

while (if_sample_freq > (adc_freq / 2))
if_sample_freq = if_sample_freq - adc_freq;
@@ -1389,6 +1403,7 @@
init = tuner_init_mt2060_2;
break;
case AF9013_TUNER_TDA18271:
+ case AF9013_TUNER_TDA18218:
len = ARRAY_SIZE(tuner_init_tda18271);
init = tuner_init_tda18271;
break;
diff -Nru linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h
--- linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h 2011-01-04 14:52:02.621000024 +0100
@@ -789,8 +789,9 @@
{ 0x9bd9, 0, 8, 0x08 },
};

-/* NXP TDA18271 tuner init
- AF9013_TUNER_TDA18271 = 156 */
+/* NXP TDA18271 & TDA18218 tuner init
+ AF9013_TUNER_TDA18271 = 156
+ AF9013_TUNER_TDA18218 = 179 */
static struct regdesc tuner_init_tda18271[] = {
{ 0x9bd5, 0, 8, 0x01 },
{ 0x9bd6, 0, 8, 0x04 },
</pre>

[[Category: DVB-T USB Devices]]

TerraTec

2011-01-04T15:50:20Z

Wirbel:

TerraTec is a German manufacturer of audio, video and analog/digital TV products. They do not officially support Linux, but provide some [http://linux.terratec.de/tv_en.html information to help Linux support some of their products]. Using press photos of their products on the linuxtv.org wiki is explicitly allowed.

{| class="sortable" border="1" cellpadding="5" cellspacing="0" align="center"
|+'''DVB Devices sold by TerraTec'''
|-
! style="background:#ffdead;" | Device
! style="background:#ffdead;" | Description
! style="background:#ffdead;" | Supported
|-
! style="background:#efefef;" | [[TerraTec Cinergy 1200 DVB-S|Cinergy 1200 DVB-S]]
! [[DVB-S]] [[PCI]] device with Philips [[Philips SAA7146|SAA7146]] PCI bridge and Philips DVB-S frontend
! should be
|-
! style="background:#efefef;" | [[TerraTec Cinergy 1200 DVB-C|Cinergy 1200 DVB-C]]
! [[DVB-C]] [[PCI]] device with Philips [[Philips SAA7146|SAA7146]] PCI bridge and Philips DVB-C frontend
! [[TerraTec Cinergy 1200 DVB-C#Version 1176 was not supported|should be]]
|-
! style="background:#efefef;" | [[TerraTec Cinergy 1200 DVB-T|Cinergy 1200 DVB-T]]
! [[DVB-T]] [[PCI]] device with Philips [[Philips SAA7146|SAA7146]] PCI bridge and Philips DVB-T frontend
! should be
|-
! style="background:#efefef;" | [[TerraTec Cinergy 1400 DVB-T|Cinergy 1400 DVB-T]]
! [[DVB-T]] [[PCI]] device, cx88
! should be
|-
! style="background:#efefef;" | [[TerraTec Cinergy HT PCI|Cinergy HT PCI]]
! [[DVB-T]] + analog [[PCI]] device
! yes
|-
! style="background:#efefef;" | [[TerraTec Cinergy 2400i DVB-T|Cinergy 2400i DVB-T]]
! [[DVB-T]] [[PCIe]] device with two Thomson tuners, Micronas chipsets
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy T Stick|Cinergy T Stick]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy T2|Cinergy T²]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! yes
|-
! style="background:#efefef;" | [[TerraTec Cinergy T USB RC|Cinergy T USB RC]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! no (with patch)
|-
! style="background:#efefef;" | [[TerraTec Cinergy T USB XS|Cinergy T USB XS]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! Yes
|-
! style="background:#efefef;" | [[TerraTec Cinergy T USB XXS|Cinergy T USB XXS]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! with a patch
|-
! style="background:#efefef;" | [[TerraTec Cinergy Hybrid T USB XS|Cinergy Hybrid T USB XS]]
! [[DVB-T]] + analog [[Universal Serial Bus|USB 2.0]] device
! maybe
|-
! style="background:#efefef;" | [[TerraTec Prodigy Hybrid T XS|Prodigy Hybrid T XS]]
! [[DVB-T]] + analog [[Universal Serial Bus|USB 2.0]] device
! maybe
|-
! style="background:#efefef;" | [[TerraTec Cinergy T USB XE|Cinergy T USB XE rev1]]
! [[DVB-T]] [[Universal Serial Bus|USB 1.1]]/[[Universal Serial Bus|USB 2.0]] device
! yes
|-
! style="background:#efefef;" | [[TerraTec Cinergy T USB XE|Cinergy T USB XE rev2]]
! [[DVB-T]] [[Universal Serial Bus|USB 1.1]]/[[Universal Serial Bus|USB 2.0]] device
! with a patch
|-
! style="background:#efefef;" | [[TerraTec Cinergy HT USB XE|Cinergy HT USB XE]]
! [[DVB-T]] + analog [[Universal Serial Bus|USB 2.0]] device
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy HT PCMCIA|Cinergy HT PCMCIA]]
! [[DVB-T]] + analog [[CardBus]] device
! maybe
|-
! style="background:#efefef;" | [[TerraTec Cinergy HT Express|Cinergy HT Express]]
! [[DVB-T]] + analog [[ExpressCard]] device
! with a patch
|-
! style="background:#efefef;" | [[TerraTec Cinergy T Express|Cinergy T Express]]
! [[DVB-T]] [[ExpressCard|ExpressCard/34]] device
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy S USB|Cinergy S USB]]
! [[DVB-S]] [[Universal Serial Bus|USB 2.0]] device
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy DT USB XS Diversity|Cinergy DT USB XS Diversity]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device with two tuners
! yes
|-
! style="background:#efefef;" | [[TerraTec Cinergy Piranha|Cinergy Piranha]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy C DVB-C|Cinergy C DVB-C]]
! [[DVB-C]] [[PCI]] device
! with a patch
|-
! style="background:#efefef;" | [[TerraTec Cinergy S2 PCI HD CI| Cinergy S2 PCI HD CI]]
! [[DVB-S2]] [[PCI]] device
! no
|-
! style="background:#efefef;" | [[TerraTec Cinergy HTC USB XS HD| Cinergy HTC USB XS HD]]
! [[DVB-T]] [[Universal Serial Bus|USB 2.0]] device
! [http://www.mail-archive.com/linux-media@vger.kernel.org/msg07810.html no]
|-
! style="background:#efefef;" | [[TerraTec Cinergy Hybrid XE| Cinergy Hybrid XE]]
! [[DVB-T]] + analog [[Universal Serial Bus|USB 2.0]] device
! DVB-T yes analog no
|-
|}

* [[TerraTec Cinergy USB TV 250]] ... It has been reported to be fully supported.
* [[TerraTec Cinergy 250 PCI]]
* [[TerraTec Cinergy 400]]
* [[TerraTec Cinergy 400TV mobile]]
* [[TerraTec Cinergy 600]]

== External Links ==
* http://terratec.com
* http://linux.terratec.de/

[[Category:Vendor]]

TerraTec Cinergy T USB RC

2011-01-04T15:40:25Z

Wirbel:

TerraTec Cinergy T USB RC

2011-01-04T15:34:31Z

Wirbel: Created page with '{{Device_List_Medium_Detail/Header | content = {{USB_Device_Data |renderwith=Device_List_Medium_Detail/Row |selatt1=did |selval1=terratec-trc-mk2 }} }} === Version 2 AF9015 ===...'

Template:USB Device Data

2011-01-04T15:18:38Z

Wirbel: /* terratec-trc-mk2 */

<noinclude>

== Introduction to this page ==

The data contained in this template is slowly replacing the collection of tables in the [[DVB-T_USB Devices]] article.

The main purpose is to collect the available information on devices that now is scattered around on device/chipset/driver pages, and at the same time make it accessible from all those places.
Having a "single copy" will hopefully ease updating information on devices and drivers.

Keeping the information in one place of course means that there will be lots of details that most users don't care about.
Using some minor template voodoo, it is possible to select a limited subset of data fields and thus construct tables with a small subset of columns.
Go to [[Template:List of Device List Templates]] for a starting point and [[HLPlayground2]] for examples.

With the help of the ParserFunctions/StringFunctions extension it is possible to select a subsets of the datasets for other purposes.
E.g. The devices that use a certain tuner or the devices by a certain vendor.
Some examples are currently shown on [[HLPlayground2]] and [[HLPlayground2/doubleselection]].

{{note|If you edit the data below, you may have to outsmart your browser-cache and the rendering cache of the wiki. Otherwise your changes will not appear in the table renderings. }}
{{note|Do yourself a favor and make sure you have enabled ''section editing'' in your preferences. The whole page is currently 78 kbyte and it will break the 100kb limit pretty soon. }}

There's a helper page to for editors [[DVB-T_USB_Devices_ListData/Helper]] that shows all devices.

== Usage Examples on device pages ==

Low detail:
<pre>
{{Device_List_Low_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Low_Detail/Row
|selatt1=did
|selval1=msi-digivox-mini-ii-v3
}}
}}
</pre>

As you can see ''did'' is set as selection attribute and ''msi-digivox-mini-ii-v3'' as selection value.

If you want to show some more detail you can exchange ''Low'' for ''Medium'' in '''both''' template names. The ''/Header'' and ''/Row'' template.

<pre>
{{Device_List_Medium_Detail/Header
| content =
{{USB_Device_Data
|renderwith=Device_List_Medium_Detail/Row
|selatt1=did
|selval1=msi-digivox-mini-ii-v3
}}
}}
</pre>

There is also a set of templates for ''Full'' details if you want to get the fields that are ment for filtering only, like the ''did'' field itself.

== Syntax and Semantics ==

Here is a cut'n paste template for new devices. (Don't forget use the same ''XYZ'' in all three places.)
<pre>
</includeonly><noinclude>
==== XYZ ====
{{DeviceDisplayMedium|XYZ}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=XYZ
| vendor=
| device=
| standard=
| supported=
| pic=
| url=
| hostinterface=
| usbid=
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</pre>

{| class="wikitable"
| ''did'' || a device ID that makes it possible to render just this one device in a table and to jump directly to the device on this page. As matching in the selection templates is done on substrings you need to make sure that the did's are unique and disjoint.
|-
| ''vendor'' || the device manufacturer/vendor. E.g. Hauppauge
|-
| ''standard'' || the broadcasting standard or standards that the devce supports E.g. Possible values would be the analog encodings "ANALOG-PAL" "ANALOG-NTSC" "ANALOG-SECAM" as well as digital encodings "DVB-T" "DVB-C" "DVB-C2" "DVB-S" "DVB-S2" "DVB-H" "DVB-SH" "ATSC" "ATSC-M/H" "ISDB-S" "ISDB-T" "1seg" "ISDB-C" "SBTVD/ISDB-Tb" "DMB-T/H" "ADTB-T" "CMMB" "DMB-T" "T-DMB" "S-DMB" "MediaFLO". Even "FM-RADIO" and "AM-RADIO" could be included in this list.
|-
| ''device'' || the device name. E.g. '''Cinergy XXS''' This is also the place to put a link to a device page.
|-
| ''supported'' || support status.
<pre> {{yes}} or {{no}} </pre>
if there is no further detail but I'd prefer something like
<pre> {{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}} </pre>
if supported by vanilla kernel since version 2.6.25 (the entry will be linked to the kernel source repository)
<pre> {{Supported in HG|since=2009-01-31}} </pre>
for support in main line mercurial repository
<pre> {{Supported in HG Branch|since=2009-01-31|branchurl=http://linuxtv.org/hg/~anttip/af9015/}} </pre>
for support in certain branch
<pre> {{Supported in External|since=2009-01-31|url=http://mcentral.de/wiki/index.php5/Em2880}} </pre>
for support somewhere else
|-
| ''pic'' || preferably an image uploaded to the wiki (using 120px width). Like this: <pre>[[image:Dvb-t-usb-msi-digivox-ii-rev3-001.jpg|120px]]</pre>Links to (not embedding of) external pictures are OK in a pinch, but those might disappear any time as some vendors only keep the current devices on their page and every older Device vanishes. Please, please, please, if you own a device that doesn't have a picture yet, take one and upload it. Even a blurry picture taken with a mobile phone camera is better than nothing. However, do not upload pictures that you downloaded from a vendor page without asking for permission to use it here. Taking a picture of a device that you own is the better choice and other users will greatly benefit from it.
|-
| ''url'' || link to the manufacturers/vendors page for that device. but also links to linux user experience pages, forum articles or mailing list achives regarding this device.
|-
| ''hostinterface'' || interface supported. E.g. "USB1.1" and "USB2.0" but also "ISA" "PCI32" "PCI64" "PCI-X" "PCIe" "PCCARD" "CardBus" "ExpressCard" "IEEE1394"
|-
| ''hw'' || summary of the hardware (human readable). this will hold the old data during transition and also allow to add hw related information beyond tuner, demodulator and usb bridge.
|-
| ''usbid'' || usb id. 4 hex digits, colon, 4 hex digits. lower case. e.g. <tt>12ba:f001</tt> preferably only add the "cold" id. The one shown before firmware upload. The warm id should go the the device's page.
|-
|
* ''tuner''
* ''demodulator''
* ''usbbridge''
| machine readable component names for implementing filters based on this. E.g. af9015, vt7045, mt2060
|-
| ''fw'' || firmware name. link?
|-
| ''comment'' || human readable comments. if those comments stretch several lines, it is time to make a device page. :-)
|}

== Data ==
Click on Edit to see the data.
</noinclude><includeonly>

</includeonly><noinclude>
=== unsupported devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== pctv-nanostick-t2-290e ====
{{DeviceDisplayMedium|pctv-nanostick-t2-290e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pctv-nanostick-t2-290e
| vendor=PCTV Systems
| device=nanoStick T2 290e
| standard=DVB-T, DVB-T2
| supported={{no}}
| pic=[[Image:PCTV_nanoStick_T2_290e_PCB_em28xx_demod.jpg|120px]]
| url=[http://www.pctvsystems.com/Products/ProductsEuropeAsia/Digitalproducts/PCTVnanoStickT2/tabid/248/language/en-GB/Default.aspx]
| hostinterface=USB2.0
| usbid=2013:024f
| hw=Empia [[Em28xx_devices|em28xx]] / Sony CXD2820R / NXP TDA18271
| tuner=tda18271
| demodulator=cxd2820r
| usbbridge=em28xx
| fw=N/A
| comment=First DVB-T2 capable receiver. Development is [http://www.stevekerrison.com/290e/index.html active] but slow moving; help welcomed.
}}

</includeonly><noinclude>

==== conceptronic-ctvdigdual-v2 ====
{{DeviceDisplayMedium|conceptronic-ctvdigdual-v2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=conceptronic-ctvdigdual-v2
| vendor=Conceptronic
| device=Digital Dual TV Receiver CTVDIGDUAL_V2
| standard=DVB-T
| supported={{no}}
| pic=
| url=[http://www.conceptronic.net/Site/desktopdefault.aspx?tabindex=1&tabid=242&cid=40&gid=4050&pid=CTVDIGDUAL_V2]
| hostinterface=USB2.0
| usbid=1b80:e410
| hw=Afatech/ITETech IT9135
| tuner=it9135
| demodulator=it9135
| usbbridge=it9135
| fw=
| comment=Dual tuner. Tested with kernel 2.6.34
}}

</includeonly><noinclude>

==== agk-10314 ====
{{DeviceDisplayMedium|agk-10314}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=agk-10314
| vendor=Agk
| device=10314
| standard=DVB-T
| supported={{no}}
| pic=
| url=[http://www.mail-archive.com/linux-media@vger.kernel.org/msg16480.html]
| hostinterface=USB2.0
| usbid=1d19:1103
| hw=Realtek rtl2832u
| tuner=rtl2832u
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>

==== artec-atsc-t14a ====
{{DeviceDisplayMedium|artec-atsc-t14a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-atsc-t14a
| vendor=[[Artec]]
| device=[[Artec T14A|T14A]]
| standard=ATSC
| supported={{no}}
| pic=
| url=[http://www.linuxtv.org/pipermail/linux-dvb/2007-February/016134.html]
| hostinterface=USB2.0
| usbid=05d8:810d
| hw=Microtune MT2060, LG DT3303, Cypress FX2 (CY7C68013)
| tuner=mt2060
| demodulator=dt3303
| usbbridge=cypressfx2
| fw=
| comment=warm id 05d8:810e
}}

</includeonly><noinclude>
==== tvisto-dvbusb-white ====
{{DeviceDisplayMedium|tvisto-dvbusb-white}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tvisto-dvbusb-white
| vendor=TVISTO
| device=[[TVISTO_DVB-T_USB|TVT-DVBTUSB]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:Tvisto_USB_DVB-T_15a4-9016.png|120px]]
| url=
| hostinterface=USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015|Afatech AF9015]], [[Microtune_MT2060|Microtune MT2060]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Is a GeniaTech T328B rebranded.
}}

</includeonly><noinclude>
==== tvisto-dvbusb-ec168 ====
{{DeviceDisplayMedium|tvisto-dvbusb-ec168}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tvisto-dvbusb-ec168
| vendor=TVISTO
| device=[[TVISTO_DVB-T_USB|TVT-DVBTUSB]]
| standard=DVB-T
| supported=???
| pic=[[Image:Tvisto_USB_DVB-T_15a4-9016.png|120px]]
| url=
| hostinterface=USB2.0
| usbid=18b4:fffa
| hw=[[MXL5003S]], [[E3C EC168]]
| tuner=mxl5003s
| demodulator=ec168
| usbbridge=ec168
| fw=
| comment=It has [[MXL5003S]] and a [[E3C EC168]] X***98501T" (I couldn't read all numbers, they were deleted). In reverse (inside in the circuit) It has "4407 ver 2.0"
}}

</includeonly><noinclude>

=== avermedia a8xx series ===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-a800 ====
{{DeviceDisplayMedium|avermedia-a800}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a800
| vendor=[[AVerMedia]]
| device=AVerTV DVB-T USB 2.0 A800
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13|file=drivers/media/dvb/dvb-usb/a800.c}}
| pic=
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=163&tab=APDriver]
| hostinterface=USB1.1 USB2.0
| usbid=07ca:a800
| hw=[[DiBcom DiB3000|DiBcom 3000P]] dvb-usb-a800.ko
| tuner=
| demodulator=dib3000m
| usbbridge=
| fw=dvb-usb-avertv-a800-02.fw
| comment=Remote control handling is different to the one used in the other DiBusb clones and many essential keys do not work at all (with X.org and linux kernels 2.6.17 and 2.6.18). warm id: 07ca:a801
}}

</includeonly><noinclude>

==== avermedia-a835 ====
{{DeviceDisplayMedium|avermedia-a835}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a835
| vendor=[[AVerMedia]]
| device=AVerTV Volar HD A835
| standard=DVB-T
| supported={{no}}
| pic=[http://www.avermedia.com/avertv/Upload/ProductImages/140/Box-A8351.jpg]
| url=[http://www.avermedia.com/avertv/product/ProductDetail.aspx?Id=508]
| hostinterface=USB2.0
| usbid=07ca:b835
| hw=[[Afatech AF9035|AF 9035]]
| tuner=
| demodulator=af9035
| usbbridge=af9035
| fw=
| comment=tried with linux kernels 2.6.32-24 (Ubuntu 10.04). Appears to use af9035 chip and unknown tuner (possible fitipower). Not supported by either 2.6.32 or trunk (30/08/2010) or by vendor supplied driver.
}}

</includeonly><noinclude>

==== avermedia-a825 ====
{{DeviceDisplayMedium|avermedia-a825}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a825
| vendor=[[AVerMedia]]
| device=AVerTV A825/TwinStar
| standard=DVB-T
| supported={{no}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9035|AF 9035]]
| tuner=
| demodulator=af9035
| usbbridge=af9035
| fw=
| comment=Dual AF9035 based. At this stage, AfaTech will not release full specifications, and so these cards are likely to remain unsupported.
}}

</includeonly><noinclude>

=== avermedia h800 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-h830d ====
{{DeviceDisplayMedium|avermedia-h830d}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-h830d
| vendor=[[AVerMedia]]
| device=AVerTV Volar Video Capture USB (H830D)
| standard=DVB-T
| supported={{no}}
| pic=[http://www.avermedia.com/avertv/Upload/ProductImages/Pro-H830D-AVerTV%20Volar%20Video%20Capture%20USB-300.jpg]
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=503&tab=APDriver]
| hostinterface=USB2.0
| usbid=07ca:1830
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=Written H830 on device. Tried with Ubuntu 10.04, Kernel 2.6.32-25-generic (x86_64), but no luck. In dmesg I see:
[ 2625.662599] usb 5-2: new full speed USB device using uhci_hcd and address 1 
[ 2625.838880] usb 5-2: configuration #1 chosen from 1 choice 

}}

</includeonly><noinclude>

=== AF9005 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== ansonic-stick ====
{{DeviceDisplayMedium|ansonic-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ansonic-stick
| vendor=Ansonic
| device=DVB-T USB1.1 stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.mail-archive.com/linux-dvb@linuxtv.org/msg28726.html]
| hostinterface=USB1.1
| usbid=10b9:6000
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=af9005.fw
}}

</includeonly><noinclude>

==== allnet-all2006 ====
{{DeviceDisplayMedium|allnet-all2006}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=allnet-all2006
| vendor=Allnet
| device=ALL2006 USB DVB-T Stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23 or .25?|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.allnet.de/product_info_allnet.php?cPath=_&products_id=99975]
| hostinterface=USB1.1
| usbid=
| comment=The tuner sensitivity is less than impressive.
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw]
}}

</includeonly><noinclude>
==== delock93168 ====
{{DeviceDisplayMedium|delock93168}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=delock93168
| vendor=Delock
| device=USB2.0 DVB-T Receiver Nr.93168
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23 or .25?|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://delock.de/produkte/gruppen/Multimedia/USB20_DVB-T_Empfnger_93168.html]
| hostinterface=USB1.1
| usbid=
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw]
}}

</includeonly><noinclude>

==== Easy TV A05 ====
{{DeviceDisplayMedium|easytv-a05}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=easytv-a05
| vendor=EasyTV
| device=EasyTV USB DVB-T Dongle
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://images.google.co.uk/images?q=easytv%20a05]
| hostinterface=USB1.1
| usbid=
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=af9005.fw
}}

</includeonly><noinclude>

==== ridata-t100 ====
{{DeviceDisplayMedium|ridata-t100}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ridata-t100
| vendor=Ridata
| device=USB DVB-T Stick T100
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23 or .25?|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.ritek.com/p2-pro5-lp.asp]
| hostinterface=USB1.1
| usbid=
| comment=
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw]
}}

</includeonly><noinclude>
==== terratec-txe-rev1 ====
{{DeviceDisplayMedium|terratec-txe-rev1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-txe-rev1
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XE|Cinergy T USB XE (rev1)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.23|file=drivers/media/dvb/dvb-usb/af9005.c}}
| pic=
| url=[http://www.terratec.net/en/products/Cinergy_T_USB_XE_1672.html]
| hostinterface=USB1.1
| usbid=0ccd:0055
| tuner=
| demodulator=af9005
| usbbridge=af9005
| hw=[[Afatech AF9005]]
| fw=[http://ventoso.org/luca/af9005/af9005.fw af9005.fw] or [http://ventoso.org/luca/af9005/af9005.fw-6.11.23.01 af9005.fw-6.11.23.01] (rename it to af9005.fw!)
| comment=
}}

</includeonly><noinclude>

=== AF9015 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== afatech-9015-9016 ====
{{DeviceDisplayMedium|afatech-9015-9016}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=afatech-9015-9016
| vendor=Afatech
| device=AF9015 DVB-T USB2.0 stick
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=15a4:9015 15a4:9016
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== avermedia-a309 ====
{{DeviceDisplayMedium|avermedia-a309}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a309
| vendor=[[AVerMedia]]
| device=A309 Mini Card
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a309
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== alcor-dtv-duo ====
{{DeviceDisplayMedium|alcor-dtv-duo}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=alcor-dtv-duo
| vendor=Alcor
| device=DTV DUO
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.37}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015|Afatech AF9015A + AF9013]], 2x MxL5007T (3f)
| tuner=mxl5007t
| demodulator=af9013
| usbbridge=af9015
| fw=dvd-usb-af9015.fw (5.1.0.0)
| comment=Dual tuner. Tested with kernel 2.6.37
}}

</includeonly><noinclude>

==== avermedia-a815 ====
{{DeviceDisplayMedium|avermedia-a815}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a815
| vendor=[[AVerMedia]]
| device=[[AVerMedia AVerTV Digi Volar X (A815)|AVerTV Digi Volar X (A815)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:Volar_x.png|120px]]
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=39]
| hostinterface=USB2.0
| usbid=07ca:a815
| hw=[[Afatech AF9015|Afatech AF9015-NT*]], MXL5003S
| tuner=mxl5003s
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== avermedia-a850 ====
{{DeviceDisplayMedium|avermedia-a850}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a850
| vendor=[[AVerMedia]]
| device=AVerTV Volar Black HD (A850)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.30-rc1}}
| pic=[[Image:AVerMedia_AVerTV_Volar_Black_HD_(A850).png|120px]]
| url=[http://www.avermedia.eu/avertv/SP/Product/ProductDetail.aspx?Id=431]
| hostinterface=USB2.0
| usbid=07ca:850a
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== avermedia-a805 ====
{{DeviceDisplayMedium|avermedia-a805}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a805
| vendor=[[AVerMedia]]
| device=AVerTV Volar GPS 805 (A805)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a805
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== conceptronic-ctvdigrcu ====
{{DeviceDisplayMedium|conceptronic-ctvdigrcu}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=conceptronic-ctvdigrcu
| vendor=Conceptronic
| device=USB2.0 DVB-T CTVDIGRCU V3.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:e397
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== dikom-ultimate ====
{{DeviceDisplayMedium|dikom-ultimate}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dikom-ultimate
| vendor=Dikom
| device=USB-DVB-T Ultimate
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.30}}
| pic=
| url=[http://www.dikom.it/catalogo.aspx?Prod=245]
| hostinterface=USB1.1 USB2.0
| usbid=
| hw=[[Afatech AF9015]], [[Quantek QT1010]]
| tuner=qt1010
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=also sold as "PEAK 203244AGPK DVB-T Digital TV USB Stick" and "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)" and others.
}}

</includeonly><noinclude>

==== digitalnow-tinytwin-v1 ====
{{DeviceDisplayMedium|digitalnow-tinytwin-v1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinytwin-v1
| vendor=DigitalNow
| device=[[DigitalNow TinyTwin DVB-T Receiver|TinyTwin DVB-T Receiver]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=13d3:3226
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== digitalnow-tinytwin-v2 ====
{{DeviceDisplayMedium|digitalnow-tinytwin-v2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinytwin-v2
| vendor=DigitalNow
| device=[[DigitalNow TinyTwin DVB-T Receiver|TinyTwin DVB-T Receiver V2]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.34}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:e402
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Different device, new USB ID.
}}

</includeonly><noinclude>

==== digitalnow-tinytwin-v3 ====
{{DeviceDisplayMedium|digitalnow-tinytwin-v3}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinytwin-v3
| vendor=DigitalNow
| device=[[DigitalNow TinyTwin DVB-T Receiver|TinyTwin DVB-T Receiver V3]]
| standard=DVB-T
| supported=Expected in 2.6.37
| pic=
| url=
| hostinterface=USB2.0
| usbid=1f4D:9016
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Different device, new USB ID.
}}

</includeonly><noinclude>

==== digittrade-stick ====
{{DeviceDisplayMedium|digittrade-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digittrade-stick
| vendor=DIGITTRADE
| device=DVB-T Stick
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.??}}
| pic=
| url=[http://www.digittrade.de/shop/product_info.php/info/p66_DIGITTRADE-DVB-T-Stick-USB-2-0-1-1-Windows-Linux-MAC-Eee-PC.html]
| hostinterface=USB1.1 USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== fujitsu-siemens-slim ====
{{DeviceDisplayMedium|fujitsu-siemens-slim}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=fujitsu-siemens-slim
| vendor=Fujitsu-Siemens
| device=Slim Mobile USB DVB-T
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:Fujitsu.JPG|120px]]
| url=
| hostinterface=USB2.0
| usbid=07ca:8150
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== geniatech-t328b ====
{{DeviceDisplayMedium|geniatech-t328b}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=geniatech-t328b
| vendor=Geniatech
| device=T328B
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:Geniatech_t328b.png|120px]]
| url=[http://www.geniatech.com/pa/t328b.htm]
| hostinterface=USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015]], [[Microtune MT2060]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== genius-tvgo-t03 ====
{{DeviceDisplayMedium|genius-tvgo-t03}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=genius-tvgo-t03
| vendor=Genius
| device=TVGo DVB-T03
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== hama-usb2stick ====
{{DeviceDisplayMedium|hama-usb2stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hama-usb2stick
| vendor=[[Hama]]
| device=[[Hama DVB-T USB2 Stick|DVB-T USB2 Stick]]
| standard=DVB-T
| supported={{Supported_in_HG|since=2008-09}}
| pic=[[image:HamaDVB_T-USB2-Stick.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]] (declared as 9016, working as [[Afatech AF9015|AF9015]])
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== kworld-395u ====
{{DeviceDisplayMedium|kworld-395u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-395u
| vendor=[[KWorld]]
| device=USB DVB-T TV Stick II (VS-DVB-T 395U)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.29}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:e396 1b80:e39b 1b80:e395
| hw=Afatech AF9013/[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=support for usbids 1b80:e39b 1b80:e395 added in 2.6.30
}}

</includeonly><noinclude>

==== kworld-399u-dual ====
{{DeviceDisplayMedium|kworld-399u-dual}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-399u-dual
| vendor=[[KWorld]]
| device=[[KWorld USB Dual DVB-T TV Stick (DVB-T 399U)|USB Dual DVB-T TV Stick (DVB-T 399U)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:KWorld_USB_Dual_DVB-T_TV_Stick_(DVB-T_399U).png|120px]]
| url=[http://global.kworld-global.com/main/prod_in.aspx?mnuid=1248&modid=6&pcid=44&ifid=17&prodid=73]
| hostinterface=USB2.0
| usbid=1b80:e399 1b80:e400
| hw=Afatech AF9013/[[Afatech AF9015]]/2x [[MXL5003S]]
| tuner=mxl5003s
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=support for 1b80:e400 added in 2.6.32
}}

</includeonly><noinclude>
==== kworld-ub499-2t ====
{{DeviceDisplayMedium|kworld-ub499-2t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-ub499-2t
| vendor=[[KWorld]]
| device=[[Kworld UB499-2T|UB499-2T]]
| standard=DVB-T
| supported=See Device page.
| pic=
| url=
| hostinterface=USB2.0
| usbid=048d:9135, 1b80:e409
| hw=Afatech/ITE IT9135 (usbid 048d:9135) or IT9137 (usbid 1b80:e409)
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>

==== kworld-pc160-2t ====
{{DeviceDisplayMedium|kworld-pc160-2t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-pc160-2t
| vendor=[[KWorld]]
| device=[[KWorld DVB-T PC160-2T|PlusTV Dual DVB-T PCI (DVB-T PC160-2T)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:Kworld pc160.jpg|120px]]
| url=
| hostinterface=PCI32
| usbid=1b80:c160
| hw=Afatech AF9013/[[Afatech AF9015]]/2x [[MXL5003S]]
| tuner=mxl5003s
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== kworld-mc810 ====
{{DeviceDisplayMedium|kworld-mc810}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-mc810
| vendor=[[KWorld]]
| device=Digial MC-810
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1b80:c810
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== leadtek-dtv-gold ====
{{DeviceDisplayMedium|leadtek-dtv-gold}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-dtv-gold
| vendor=[[Leadtek]]
| device=[[Leadtek WinFast DTV Dongle Gold|WinFast DTV Dongle Gold]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:Leadtek_gold.jpg|100px]]
| url=[http://www.leadtek.com/eng/multimedia/overview.asp?lineid=6&pronameid=407&check=f]
| hostinterface=USB2.0
| usbid=0413:6029
| hw=[[Afatech AF9015]], [[NXP/Philips_TDA182xx|NXP/Philips TDA18271]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=dvb-usb-af9015.fw
| comment=
}}

</includeonly><noinclude>

==== lifeview-lv5t ====
{{DeviceDisplayMedium|lifeview-lv5t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=lifeview-lv5t
| vendor=[[LifeView]]
| device=LV5T
| standard=DVB-T
| supported={{Supported_in_HG|since=2008-09}}
| pic=
| url=[http://www.lifeview.hk/e/product/product_detail.asp?sku=14]
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]], [[NXP/Philips_TDA182xx|NXP/Philips TDA18271HD/C1]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw] (latest one works)
| comment=
}}

</includeonly><noinclude>
==== msi-digivox-duo ====
{{DeviceDisplayMedium|msi-digivox-duo}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-duo
| vendor=[[MSI]]
| device=DIGIVOX Duo
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=[http://eu.msi.com/index.php?func=proddesc&maincat_no=132&prod_no=1409]
| hostinterface=USB2.0
| usbid=1462:8801
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=dual tuner
}}

</includeonly><noinclude>
==== msi-digivox-mini-ii-v3 ====
{{DeviceDisplayMedium|msi-digivox-mini-ii-v3}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-ii-v3
| vendor=[[MSI]]
| device=[[MSI DigiVox mini II V3.0|DIGIVOX mini II V3.0]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}(MT2060 version) {{no}}(RTL2832 version)
| pic=[[image:Dvb-t-usb-msi-digivox-ii-rev3-001.jpg|120px]]
| url=[http://www.msi.com/index.php?func=proddesc&prod_no=1262&maincat_no=132&cat2_no=260]
| hostinterface=USB1.1 USB2.0
| usbid=15a4:9016
| hw=[[Afatech AF9015]], [[Microtune MT2060]] or [[RTL2823]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Manufacturer changed tuner. See device page for details.
}}

</includeonly><noinclude>

==== msi-digivox-mini-iii ====
{{DeviceDisplayMedium|msi-digivox-mini-iii}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-iii
| vendor=[[MSI]]
| device=[[MSI DIGIVOX mini III|DIGIVOX mini III]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[image:MSI_DIGIVOX_mini_III.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=1462:8807
| hw=[[Afatech AF9015|Afatech AF9015A]], [[NXP/Philips_TDA182xx|NXP/Philips TDA18211HD]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== peak-203244 ====
{{DeviceDisplayMedium|peak-203244}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=peak-203244
| vendor=Peak
| device=203244AGPK DVB-T Digital TV USB Stick
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.30}}
| pic=[[Image:Peak-203244agpk.jpg|120px]]
| url=[http://www.peakhardware.com/products/productdetail.asp?PAID=390]
| hostinterface=USB1.1 USB2.0
| usbid=
| hw=[[Afatech AF9015]], [[Quantek QT1010]]
| tuner=qt1010?
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=Identifies as "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)". Board has "DVBT-395U REV D" stamped on it, beneath casing.
}}

</includeonly><noinclude>

==== pinnacle-71e ====
{{DeviceDisplayMedium|pinnacle-71e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-71e
| vendor=[[Pinnacle]]
| device=PCTV 71e
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=2304:022b
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=dvb-usb-af9015.fw
| comment=Sometimes called "Pinnacle Dazzle 71e"
}}

</includeonly><noinclude>
==== szforward-eztv859 ====
{{DeviceDisplayMedium|szforward-eztv859}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=szforward-eztv859
| vendor=Shenzhen Forward Video
| device=EzTV859
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=[http://www.szforwardvideo.com/product/Pro_4_7.html] [http://www.made-in-china.com/china-products/productviewoMhxCZOdyfcR/Wand-TV-DVB-T-Stick-A15-.html]
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=sold under lots of different names like "WandTV", "EzTV A15", "EzTV DUTV007A" - '''Note, some may now be AF9035, which are UNSUPPORTED'''
}}

</includeonly><noinclude>

==== telstar-starstick2 ====
{{DeviceDisplayMedium|telstar-starstick2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=telstar-starstick2
| vendor=Telstar
| device=Starstick 2
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b9:8000
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== terratec-trc-mk2 ====
{{DeviceDisplayMedium|terratec-trc-mk2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-trc-mk2
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB RC|Cinergy T USB RC (mk II)]]
| standard=DVB-T
| supported={{no}}
| pic=[[image:Dvb-t-usb-terratec-cinergy-T-RC-mk2-001.jpg|120px]]
| url=[http://www.terratec.net/en/products/Cinergy_T_Stick_RC_97818.html]
| hostinterface=USB2.0
| usbid=0ccd:0097
| hw=[[Afatech AF9015|Afatech AF9015A]] + TDA18218HN + EM24C02A
| tuner=TDA18218HN
| demodulator=af9015A
| usbbridge=af9015A
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=see also: [http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html]
}}

</includeonly><noinclude>

==== terratec-txe-rev2 ====
{{DeviceDisplayMedium|terratec-txe-rev2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-txe-rev2
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XE|Cinergy T USB XE (rev2)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0069
| hw=[[Afatech AF9015|Afatech AF9015A]], Freescale mc44s803
| tuner=mc44s803
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>

==== tevion-dk-5203 ====
{{DeviceDisplayMedium|tevion-dk-5203}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tevion-dk-5203
| vendor=Tevion
| device=DK-5203
| standard=DVB-T
| supported={{Supported_in_HG|since=2008-09}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015]]
| tuner=tda18271
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=also sold as Elements DK-5203
}}

</includeonly><noinclude>
==== trekstor-dvb-t-usb ====
{{DeviceDisplayMedium|trekstor-dvb-t-usb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=trekstor-dvb-t-usb
| vendor=TrekStor
| device=DVB-T USB Stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=15a4:901b
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== tvisto-dvbusb-black ====
{{DeviceDisplayMedium|tvisto-dvbusb-black}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=tvisto-dvbusb-black
| vendor=TVISTO
| device=[[TVISTO_DVB-T_USB|TVT-DVBTUSB]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=[[Image:TVISTO_new_black_DVB-T_USB.png|120px]]
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9015|Afatech AF9015]], [[Microtune_MT2060|Microtune MT2060]]
| tuner=mt2060
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== twinhan-ad-tu700 ====
{{DeviceDisplayMedium|twinhan-ad-tu700}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhan-ad-tu700
| vendor=TwinHan
| device=AzureWave AD-TU700(704J)
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=13d3:3237
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== xtensions-xd-380 ====
{{DeviceDisplayMedium|xtensions-xd-380}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=xtensions-xd-380
| vendor=Xtensions
| device=XD-380
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1ae7:0381
| hw=[[Afatech AF9015]]
| tuner=
| demodulator=af9015
| usbbridge=af9015
| fw=[http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ dvb-usb-af9015.fw]
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-stick-rc-hd ====
{{DeviceDisplayMedium|terratec-cinergy-t-stick-rc-hd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-stick-rc-hd
| vendor=[[TerraTec]]
| device=Cinergy T Stick RC HD
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.37-rc6}}
| pic=[[image:TerraTec-Cinergy-T-Stick-RC-HD.png|120px]]
| url=[http://www.terratec.net/fr/produkte/Cinergy_T_Stick_RC_HD_97881.html]
| hostinterface=USB2.0
| usbid=0CCD:0097
| hw=[[Afatech AF9015]], Tuner TDA18218
| tuner=TDA18218
| demodulator=af9015
| usbbridge=af901x
| fw=dvb-usb-af9015.fw
| comment=Also known as "Cinergy T RC MKII". On this version the outer package says "Cinergy T RC" and a label on the stick itself says "MKII". Support for new tuner TDA18218 [http://www.spinics.net/lists/linux-media/msg22084.html] is working with 2.6.37-rc6.
}}

</includeonly><noinclude>

=== AF9035 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== asus-my-cinema-u3100-mini-plus ====
{{DeviceDisplayMedium|asus-my-cinema-u3100-mini-plus}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3100-mini-plus
| vendor=[[ASUS]]
| device=[[Asus U3100 Mini plus DVB-T|My Cinema U3100 Mini Plus DVBT Tuner]]
| standard=DVB-T
| supported={{yes}}, but see device page for details.
| pic=[[image:Asus_U3100_Mini_plus_DVB-T_01.JPG|120px]]
| url=
| hostinterface=USB2.0
| usbid=0b05:1779
| hw=AF9035A
| tuner=FCI2580
| demodulator=AF9035B
| usbbridge=AF9035
| fw=The only firmware required is a mapping for the IR.
| comment=There's an older device by almost the same name (without the "plus"), which is dib7xxx based and works out of the box.
}}

</includeonly><noinclude>

==== terratec-cinergy-t-stick-af9035 ====
{{DeviceDisplayMedium|terratec-cinergy-t-stick-af9035}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-stick-af9035
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T Stick|Cinergy T Stick]]
| standard=DVB-T
| supported={{yes}}, but see device page for details.
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Afatech AF9035]], TUA9001
| tuner=tua9001
| demodulator=af9035
| usbbridge=af903x
| fw=
| comment=
}}

</includeonly><noinclude>

==== ezcap-afatech-9035 ====
{{DeviceDisplayMedium|ezcap-afatech-9035}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ezcap-afatech-9035
| vendor=EzCap
| device=[[EzCap_DVB_T_Stick|DVB-T USB2.0 stick]]
| standard=DVB-T
| supported={{yes}}, but see device page for details.
| pic=[[Image:EzTV_USB_DVB-T_internals_3243.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=15a4:1001
| hw=[[Afatech AF9035]]
| tuner=fc0011
| demodulator=af9035
| usbbridge=af903x
| fw=
| comment=Sold as '''Infinity PC-TV Nano DVB-T USB stick''' (at least in Croatia) and as '''Blaze HDTV Tuner''' in Australia.
}}

</includeonly><noinclude>

==== msi-digivox-mini-hybrid ====
{{DeviceDisplayMedium|msi-digivox-mini-hybrid}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-hybrid
| vendor=[[MSI]]
| device=DIGIVOX mini Hybrid
| standard=DVB-T, ANALOG
| supported={{no}}
| pic=[http://www.msi-computer.de/uploads/prod_637f6fab6ac0763c30e114664986ff59.jpg]
| url=[http://www.msi-computer.de/index.php?func=proddesc&prod_no=10045&maincat_no=132&cat2_no=261]
| hostinterface=USB2.0
| usbid=1d6b:0001
| hw=[[Afatech AF9035]], Trident AVF4910B
| tuner=xc3028L
| demodulator=af9035
| usbbridge=af903x
| fw=
| comment=Product number S36-0400132-K36. Sometimes called "DIGIVOX mini II Hybrid"
}}

</includeonly><noinclude>

=== Anysee E30 Devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== anysee-e30-dvb-t ====
{{DeviceDisplayMedium|anysee-e30-dvb-t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=anysee-e30-dvb-t
| vendor=[[Anysee]]
| device=[[Anysee E30|E30]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.27}}
| pic=
| url=[http://www.anysee.com/eng/product/anyseeE30.php]
| hostinterface=USB2.0
| usbid=1c73:861f or 04b4:861f
| comment=Need clarification which "usbid" comes with which E30 device.
| tuner=
| demodulator=mt352 zl10353
| usbbridge=
| hw=mt352 or zl10353 demodulator
| fw=
}}

</includeonly><noinclude>
==== anysee-e30-plus-dvb-t ====
{{DeviceDisplayMedium|anysee-e30-plus-dvb-t}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=anysee-e30-plus-dvb-t
| vendor=[[Anysee]]
| device=[[Anysee E30|E30 Plus]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.27}}
| pic=
| url=[http://www.anysee.com/eng/product/anyseeE30Plus.php]
| hostinterface=USB2.0
| usbid=1c73:861f or 04b4:861f
| comment=
| tuner=
| demodulator=zl10353
| usbbridge=
| hw=zl10353 demodulator
| fw=
}}

</includeonly><noinclude>
==== anysee-e30-combo-plus-dvb-tc ====
{{DeviceDisplayMedium|anysee-e30-combo-plus-dvb-tc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=anysee-e30-combo-plus-dvb-tc
| vendor=[[Anysee]]
| device=[[Anysee E30|E30 Combo Plus]]
| standard=DVB-T DVB-C
| supported={{Supported_in_Kernel|since=2.6.28}}
| pic=
| url=[http://www.anysee.com/eng/product/anyseeE30ComboPlus.php]
| hostinterface=USB2.0
| usbid=1c73:861f or 04b4:861f
| comment=Does DVB-T and DVB-C depending on ''anysee.ko'' module parameter ''delsys='' (0=DVB-C, 1=DVB-T).
| tuner=
| demodulator=zl10353 tda10023
| usbbridge=
| hw=zl10353 or tda10023 demodulator
| fw=
}}

</includeonly><noinclude>

=== au6610 devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== sigmatek-dvb-110 ====
{{DeviceDisplayMedium|sigmatek-dvb-110}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=sigmatek-dvb-110
| vendor=Sigmatek
| device=DVB-110
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.21}}
| pic=[[image:Sigmatek DVB-110 001 stripped.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=058f:6610
| hw=Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller
| tuner=qt1010
| demodulator=zl10353
| usbbridge=au6610
| fw=none needed
| comment=
}}

</includeonly><noinclude>
=== Intel CE6230 based receivers ===
</noinclude><includeonly>

</includeonly><noinclude>
==== intel-ce9500-reference ====
{{DeviceDisplayMedium|intel-ce9500-reference}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=intel-ce9500-reference
| vendor=[[Intel]]
| device=[[Noname CE6230 OEM|CE9500 reference design / CE6230 noname devices]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30|file=drivers/media/dvb/dvb-usb/ce6230.c}}
| pic=[[image:Intel CE6230 1.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=8086:9500
| hw=mxl5003s, ce6230 (zl10353)
| tuner=mxl5003s
| demodulator=zl10353
| usbbridge=ce6230
| fw=none needed
| comment=
}}

</includeonly><noinclude>

==== avermedia-a310 ====
{{DeviceDisplayMedium|avermedia-a310}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a310
| vendor=[[AVerMedia]]
| device=A310 USB 2.0 DVB-T tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a310
| hw=mxl5003s, zl10353
| tuner=mxl5003s
| demodulator=zl10353
| usbbridge=ce6230
| fw=none needed
| comment=
}}

</includeonly><noinclude>

=== TerraTec Cinergy T² ===
</noinclude><includeonly>

</includeonly><noinclude>
==== terratec-cinergy-t2 ====
{{DeviceDisplayMedium|terratec-cinergy-t2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t2
| vendor=[[TerraTec]]
| device=[[TerraTec_Cinergy_T2|Cinergy T2]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.12}}
| pic=
| url=[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=238]
| hostinterface=USB2.0
| usbid=0ccd:0038
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=
| fw=
| comment=Aka. "Cinergy T²" (T-square).
}}

</includeonly><noinclude>
=== cxusb ===
</noinclude><includeonly>

</includeonly><noinclude>
==== medion-md95700 ====
{{DeviceDisplayMedium|medion-md95700}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=medion-md95700
| vendor=Medion
| device=MD95700 (MDUSBTV-HYBRID)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1660:0932
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=none
| comment=
}}

</includeonly><noinclude>

==== dvico-fusion-hdtv-5-gold ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-5-gold}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-5-gold
| vendor=DViCO
| device=FusionHDTV5 USB Gold
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:d500
| hw=
| tuner=lgh064f
| demodulator=lgdt3303
| usbbridge=
| fw=dvb-usb-bluebird-01.fw
| comment=warm usbid 0fe9:d700
}}

</includeonly><noinclude>

==== dvico-fusion-hdtv-dual-1 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-1
| vendor=DViCO
| device=FusionHDTV DVB-T Dual USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db50
| hw=
| tuner=dee1601
| demodulator=dee1601
| usbbridge=
| fw=
| comment=warm usbid 0fe9:db51
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-lgz201 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-lgz201}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-lgz201
| vendor=DViCO
| device=FusionHDTV DVB-T USB (LGZ201)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db00
| hw=
| tuner=lgz201
| demodulator=mt352
| usbbridge=
| fw=dvb-usb-bluebird-01.fw
| comment=0fe9:db01
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-th7579 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-th7579}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-th7579
| vendor=DViCO
| device=FusionHDTV DVB-T USB (TH7579)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db10
| hw=
| tuner=dtt7579
| demodulator=mt352
| usbbridge=
| fw=dvb-usb-bluebird-01.fw
| comment=0fe9:db11
}}

</includeonly><noinclude>
==== digitalnow-dee1601-dual ====
{{DeviceDisplayMedium|digitalnow-dee1601-dual}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-dee1601-dual
| vendor=DigitalNow
| device=DVB-T Dual USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.16}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db54
| hw=
| tuner=dee1601
| demodulator=dee1601
| usbbridge=
| fw=
| comment=warm usbid 0fe9:db54
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-dual-2 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-2
| vendor=DViCO
| device=FusionHDTV DVB-T Dual Digital 2
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db58
| hw=
| tuner=dee1601
| demodulator=dee1601
| usbbridge=
| fw=
| comment=warm usbid 0fe9:db59
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-dual-4-rev1 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-4-rev1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-4-rev1
| vendor=DViCO
| device=FusionHDTV DVB-T Dual Digital 4
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db78
| hw=
| tuner=xc3028
| demodulator=zl10353
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-nano-1 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-nano-1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-nano-1
| vendor=DViCO
| device=FusionHDTV DVB-T NANO
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db70
| hw=
| tuner=xc3028
| demodulator=zl10353
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-nano-2 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-nano-2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-nano-2
| vendor=DViCO
| device=FusionHDTV DVB-T NANO2 w/o firmware
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db70
| hw=
| tuner=xc3028
| demodulator=mt352 or zl10353
| usbbridge=
| fw=dvb-usb-bluebird-02.fw
| comment=0fe9:db71
}}

</includeonly><noinclude>
==== avermedia-a868 ====
{{DeviceDisplayMedium|avermedia-a868}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a868
| vendor=AVerMedia
| device=AVerTVHD Volar (A868R)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.27}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a868
| hw=
| tuner=mxl5003s
| demodulator=lgdt3303
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
==== dvico-fusion-hdtv-dual-4-rev2 ====
{{DeviceDisplayMedium|dvico-fusion-hdtv-dual-4-rev2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dvico-fusion-hdtv-dual-4-rev2
| vendor=DViCO
| device=FusionHDTV DVB-T Dual Digital 4 (rev 2)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fe9:db98
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>

=== [[DiBcom DiB7xxx|DiB0700]] USB2.0 DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== dibcom-stk7700p-ref ====
{{DeviceDisplayMedium|dibcom-stk7700p-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7700p-ref
| vendor=[[DiBcom]]
| device=STK7700P reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1e14
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== dibcom-stk7700pc-ref ====
{{DeviceDisplayMedium|dibcom-stk7700pc-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7700pc-ref
| vendor=[[DiBcom]]
| device=STK7700PC reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=
| tuner=
| demodulator=dib7000m
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== kaiserbaas-Netbook-TvStick-STK7770P ====
{{DeviceDisplayMedium|kaiserbaas-Netbook-TvStick-STK7770P}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kaiserbaas-Netbook-TvStick-STK7770P
| vendor=Kaiser Baas
| device=TVStick KBA01007-KB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=[[Image:KB_TVStick.jpeg|120px]]
| hostinterface=USB2.0
| usbid=10b8:1e80
| hw=DiB7770P
| tuner=
| url=[http://www.kaiserbaas.com/kaiser-baas-product-page/tv-tuners/usb-hd-tvstick-tuner-netbook]
| demodulator=dib7000m
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment= This is a clone of the 'DiBcom STK7770P reference design' This netbook version comes with 2gb of storage on the USB and a 28 key slim ir remote control [[http://www.linuxtv.org/wiki/index.php/File:Kaiserbaas-ir-remote.jpeg (image)]]. This remote control is NOT supported by the current DIB0070 driver (at 2.6.35.22) [[http://www.linuxtv.org/pipermail/linux-dvb/2010-November/032782.html]].
}}

</includeonly><noinclude>
==== hauppauge-nova-t-stick ====
{{DeviceDisplayMedium|hauppauge-nova-t-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t-stick
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-Stick|Nova-T Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:7050 2040:7060
| hw=DiB7700M or DiB7700P, MT2060
| tuner=mt2060
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=2040:7060 added in 2.6.20. There are several [[Hauppauge WinTV-NOVA-T-Stick|variants]] by the same name.
}}

</includeonly><noinclude>

==== avermedia-avertv-volar ====
{{DeviceDisplayMedium|avermedia-avertv-volar}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-avertv-volar
| vendor=[[AVerMedia]]
| device=AVerTV DVB-T Volar
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:a807 07ca:b808
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=07ca:b808 since 2.6.20
}}

</includeonly><noinclude>
==== hauppauge-nova-t500-dual ====
{{DeviceDisplayMedium|hauppauge-nova-t500-dual}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t500-dual
| vendor=[[Hauppauge]]
| device=Nova-T 500 Dual DVB-T
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:9941 2040:9950
| hw=
| tuner=
| demodulator=
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== compro-videomate-u500 ====
{{DeviceDisplayMedium|compro-videomate-u500}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=compro-videomate-u500
| vendor=Compro
| device=Videomate U500
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=[http://www.comprousa.com/en/product/u500/u500.html]
| hostinterface=USB2.0
| usbid=185b:1e78 185b:1e80
| hw=
| tuner=mt2060
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=185b:1e80 added in 2.6.24
}}

</includeonly><noinclude>

==== uniwill-stk7700p ====
{{DeviceDisplayMedium|uniwill-stk7700p}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=uniwill-stk7700p
| vendor=Uniwill
| device=STK7700P based (Hama and others)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1584:6003
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== leadtek-stk7700p ====
{{DeviceDisplayMedium|leadtek-stk7700p}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-stk7700p
| vendor=[[Leadtek]]
| device=Winfast DTV Dongle (STK7700P based)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.20}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0413:6f00 0413:6f01
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=0413:6f01 added in 2.6.26
}}

</includeonly><noinclude>
==== pinnacle-pctv-2000e ====
{{DeviceDisplayMedium|pinnacle-pctv-2000e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-2000e
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV Dual DVB-T Diversity (2000e)|PCTV 2000e]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:022c
| hw=DiB7700P, Dib 7000P, 2 * MT2266
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet.
}}

</includeonly><noinclude>

==== terratec-dt-xs-diversity ====
{{DeviceDisplayMedium|terratec-dt-xs-diversity}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-dt-xs-diversity
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy DT USB XS Diversity|Cinergy DT XS Diversity]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=[http://www.terratec.net/en/products/Cinergy_DT_USB_XS_Diversity_1608.html]
| hostinterface=USB2.0
| usbid=0ccd:005a
| hw=DiB7700P, Dib 7000P, 2 * MT2266
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet.
}}

</includeonly><noinclude>

==== hauppauge-nova-td-diversity ====
{{DeviceDisplayMedium|hauppauge-nova-td-diversity}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-td-diversity
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-TD-Stick|Nova-TD Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:9580
| hw=DiB7700P, Dib 7000P, 2 * MT2266
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet. same as: Elgato Eye-TV Diversity
}}

</includeonly><noinclude>

==== dibcom-stk7700d-ref ====
{{DeviceDisplayMedium|dibcom-stk7700d-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7700d-ref
| vendor=[[DiBcom]]
| device=STK7700D reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1ef0
| hw=
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=dual tuner/diversity device
}}

</includeonly><noinclude>

==== dibcom-dib7070p-ref ====
{{DeviceDisplayMedium|dibcom-dib7070p-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib7070p-ref
| vendor=[[DiBcom]]
| device=STK7070P reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1ebc
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-flash-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-flash-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-flash-stick
| vendor=[[Pinnacle]]
| device=PCTV DVB-T Flash Stick
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0228
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== dibcom-dib7070pd-ref ====
{{DeviceDisplayMedium|dibcom-dib7070pd-ref}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib7070pd-ref
| vendor=[[DiBcom]]
| device=STK7070PD reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1ebe
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=dual tuner device
}}

</includeonly><noinclude>
==== pinnacle-pctv-dual-diversity-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-dual-diversity-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-dual-diversity-stick
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV Dual DVB-T Diversity Stick (2001e)|PCTV 2001e Dual DVB-T Diversity Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0229
| hw=DiB0700, 2 * DiB7070P
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual tuner device. The diversity feature is not supported yet.
}}

</includeonly><noinclude>

==== avermedia-avertv-dvbt-t-express ====
{{DeviceDisplayMedium|avermedia-avertv-dvbt-t-express}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-avertv-dvbt-t-express
| vendor=[[AVerMedia]]
| device=AVerTV DVB-T Express
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=07ca:b568
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== gigabyte-u7000 ====
{{DeviceDisplayMedium|gigabyte-u7000}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=gigabyte-u7000
| vendor=Gigabyte
| device=U7000
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=[http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ProductID=2440]
| hostinterface=USB2.0
| usbid=1044:7001
| hw=Microtune 2060, Dibcom 7700 series
| tuner=mt2060
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=[http://osdir.com/ml/linux-media/2009-06/msg01254.html Remote is not working yet.(7.2009)]
}}

</includeonly><noinclude>

==== artec-t14br-dib7xxx-based ====
{{DeviceDisplayMedium|artec-t14br-dib7xxx-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t14br-dib7xxx-based
| vendor=[[Artec]]
| device=T14BR DVB-T
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=[http://www.artec.com.tw/ehtm/products/t14.htm]
| hostinterface=USB2.0
| usbid=05d8:810f
| hw=DiB7070P (DiB7000PC + DiB0070)
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Remote control untested.
}}

</includeonly><noinclude>
==== asus-my-cinema-u3000-mini ====
{{DeviceDisplayMedium|asus-my-cinema-u3000-mini}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3000-mini
| vendor=[[ASUS]]
| device=My Cinema U3000 Mini DVBT Tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=[http://www.asus.com/products.aspx?l1=18&l2=84&l3=255&l4=0&model=1298&modelmenu=1]
| url=
| hostinterface=USB2.0
| usbid=0b05:171f
| hw=DiB7700P
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=ASUS also provides drivers for this device through their [http://support.asus.com/download/download.aspx?SLanguage=en-us&model=My%20Cinema-U3000Mini website]
}}

</includeonly><noinclude>
==== asus-my-cinema-u3100-mini-dib ====
{{DeviceDisplayMedium|asus-my-cinema-u3100-mini-dib}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3100-mini-dib
| vendor=[[ASUS]]
| device=My Cinema U3100 Mini DVBT Tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0b05:173f
| hw=DiB7070P (DiB7000PC + DiB0070)
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== hauppauge-nova-t-ce-stick ====
{{DeviceDisplayMedium|hauppauge-nova-t-ce-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t-ce-stick
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-Stick|Nova-T-CE Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:7070
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== hauppauge-nova-t-mytv-t-stick ====
{{DeviceDisplayMedium|hauppauge-nova-t-mytv-t-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-t-mytv-t-stick
| vendor=[[Hauppauge]]
| device=[[Hauppauge myTV.t|Nova-T MyTV.t Stick]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.25}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:7080
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== terratec-cinergy-ht-usb-xe ====
{{DeviceDisplayMedium|terratec-cinergy-ht-usb-xe}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-ht-usb-xe
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy HT USB XE|Cinergy HT USB XE]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0058
| hw=DiB7700ci tuner:XC3028
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== pinnacle-expresscard-320cx ====
{{DeviceDisplayMedium|pinnacle-expresscard-320cx}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-expresscard-320cx
| vendor=[[Pinnacle]]
| device=Expresscard 320cx
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:022e
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-72e ====
{{DeviceDisplayMedium|pinnacle-pctv-72e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-72e
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV 72e|PCTV 72e]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=[http://neduz.be/dvb/pinnacle_pctv_dvb-t_stick_solo.jpg]
| url=
| hostinterface=USB2.0
| usbid=2304:0236
| hw=DiB7000PC
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== pinnacle-pctv-73e-plain ====
{{DeviceDisplayMedium|pinnacle-pctv-73e-plain}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-73e-plain
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV nano Stick (73e)|PCTV 73e]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=[http://www.flickr.com/photos/nk-h/2630657143/] [http://www.flickr.com/photos/nk-h/2630658003/]
| url=
| hostinterface=USB2.0
| usbid=2304:0237
| hw=DiB7000PC
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== yuan-ec372s ====
{{DeviceDisplayMedium|yuan-ec372s}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-ec372s
| vendor=YUAN High-Tech
| device=EC372S
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1edc
| hw=DiB7700P
| tuner=mt2266
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-ht-express ====
{{DeviceDisplayMedium|terratec-cinergy-ht-express}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-ht-express
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy HT Express|Cinergy HT Express]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0060
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-usb-xxs-t3 ====
{{DeviceDisplayMedium|terratec-cinergy-t-usb-xxs-t3}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-usb-xxs-t3
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XXS|Cinergy T USB XXS/ T3]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}}
| pic=[[image:Terratec Cinergy XXS 001.jpg|120px]] [[image:Terratec T3 001.jpg|120px]]
| url=[http://www.terratec.net/en/products/Cinergy_T_USB_XXS_2068.html] [http://www.terratec.net/en/products/TerraTec_T3_83463.html]
| hostinterface=USB2.0
| usbid=0ccd:0078 0ccd:10a0
| hw=DiB7070P (DiB7000PC + DiB0070)
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=T3 (0ccd:10a0) added in 2.6.31
}}

</includeonly><noinclude>

==== hauppauge-nova-td-stick-52009 ====
{{DeviceDisplayMedium|hauppauge-nova-td-stick-52009}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-td-stick-52009
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-TD-Stick|Nova-TD Stick (52009)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.27}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:5200
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== hauppauge-nova-td-500-84xxx ====
{{DeviceDisplayMedium|hauppauge-nova-td-500-84xxx}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-nova-td-500-84xxx
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-500#WinTV-NOVA-TD-500 |Nova-TD-500 (84xxx)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.27}}
| pic=[[image:Nova-td-500.jpg|120px]]
| url=[http://www.hauppauge.co.uk/pages/products/data_novat500.html]
| hostinterface=PCI32
| usbid=2040:8400
| hw=2×DiB3000P, 2×MT2060, LNA
| tuner=mt2060
| demodulator=dib3000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=''Bristol'' device (PCI card with USB devices onboard). DiB3000P on DiB0700. The LNA may need manual activation.
}}

</includeonly><noinclude>

==== gigabyte-u8000-rh ====
{{DeviceDisplayMedium|gigabyte-u8000-rh}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=gigabyte-u8000-rh
| vendor=Gigabyte
| device=U8000-RH
| standard=DVB-T ANALOG-NTSC ANALOG-PAL ANALOG-SECAM
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=[http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ProductID=2441]
| hostinterface=USB2.0
| usbid=1044:7002
| hw=DIB7700C, XC3028ACQ, CX25843-24Z
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=hybrid dvb-t and analog device
}}

</includeonly><noinclude>

==== yuan-high-tech-stk7700ph ====
{{DeviceDisplayMedium|yuan-high-tech-stk7700ph}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-stk7700ph
| vendor=YUAN High-Tech
| device=STK7700PH
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1f08
| hw=
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=DVB-part of the Asus notebook M51Sn tv-tunner
}}

</includeonly><noinclude>

==== yuan-high-tech-pd770a ====
{{DeviceDisplayMedium|yuan-high-tech-pd770a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-pd770a
| vendor=YUAN High-Tech
| device=PD770A
| standard=DVB-T, ANALOG-PAL, ANALOG-NTSC, ANALOG-SECAM, FM-RADIO
| supported=
Mixed:
* DVB-T part: {{Clone of|src=USB_Device_Data|did=yuan-high-tech-stk7700ph}} but not working yet?
* Analog TV: {{no}}
* FM Radio: {{no}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1f08
| hw=
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== crypto-diva-pd770a ====
{{DeviceDisplayMedium|crypto-diva-pd770a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=crypto-diva-pd770a
| vendor=Crypto
| device=[[Crypto Diva FM DVB-T Hybrid|Diva FM DVB-T Hybrid]]
| standard=DVB-T, ANALOG-PAL, ANALOG-NTSC, ANALOG-SECAM, FM-RADIO
| supported={{Clone of|src=USB_Device_Data|did=yuan-high-tech-pd770a}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1f08
| hw=
| tuner=xc3028
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Apparently a full clone of the YUAN High-Tech PD770A, only sold in Greece.
}}

</includeonly><noinclude>

==== asus-my-cinema-u3000hybrid ====
{{DeviceDisplayMedium|asus-my-cinema-u3000hybrid}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=asus-my-cinema-u3000hybrid
| vendor=[[ASUS]]
| device=My Cinema-U3000Hybrid
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0b05:1736
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== pinnacle-pctv-hd-pro-usb-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-hd-pro-usb-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-hd-pro-usb-stick
| vendor=Pinnacle
| device=PCTV HD Pro USB Stick (801e)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:023a
| hw=
| tuner=xc5000
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-hd-usb-stick ====
{{DeviceDisplayMedium|pinnacle-pctv-hd-usb-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-hd-usb-stick
| vendor=Pinnacle
| device=PCTV HD USB Stick (801e SE)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:023b
| hw=
| tuner=xc5000
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-express ====
{{DeviceDisplayMedium|terratec-cinergy-t-express}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-express
| vendor=TerraTec
| device=Cinergy T Express
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.29}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0062
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-dt-usb-xs-diversity-t5 ====
{{DeviceDisplayMedium|terratec-cinergy-dt-usb-xs-diversity-t5}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-dt-usb-xs-diversity-t5
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy DT USB XS Diversity|Cinergy DT USB XS Diversity/ T5]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.29}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0081 0ccd:10a1
| hw=2 * DiB7070PB1, DiB 0700C
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=0ccd:10a1 added in 2.6.31 . This device looks identical to [[TerraTec Cinergy DT USB XS Diversity|this one]] and is sold (in Germany) under the same name and in an almost identical box.
}}

</includeonly><noinclude>

==== sony-playtv ====
{{DeviceDisplayMedium|sony-playtv}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=sony-playtv
| vendor=Sony
| device=[[Sony PlayTV dual tuner DVB-T|PlayTV]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=[http://uk.playstation.com/ps3/hardware/accessories/detail/item102429/PlayTV/]
| hostinterface=USB2.0
| usbid=1415:0003
| hw=2*DiB7070P stk7070pd
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Dual Tuner.
}}

</includeonly><noinclude>

==== yuan-pd378s ====
{{DeviceDisplayMedium|yuan-pd378s}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-pd378s
| vendor=YUAN High-Tech
| device=PD378S
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:2edc
| hw=
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== hauppauge-atsc-minicard-b200- ====
{{DeviceDisplayMedium|hauppauge-atsc-minicard-b200-}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-atsc-minicard-b200-
| vendor=Hauppauge
| device=ATSC MiniCard (B200)
| standard=ATSC
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:b200
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=ATCS device .. move to ATSC table later
}}

</includeonly><noinclude>
==== hauppauge-atsc-minicard-b210- ====
{{DeviceDisplayMedium|hauppauge-atsc-minicard-b210-}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-atsc-minicard-b210-
| vendor=Hauppauge
| device=ATSC MiniCard (B210)
| standard=ATSC
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:b210
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=ATCS device .. move to ATSC table later
}}

</includeonly><noinclude>
==== yuan-high-tech-mc770 ====
{{DeviceDisplayMedium|yuan-high-tech-mc770}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-mc770
| vendor=YUAN High-Tech
| device=MC770
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.30}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:0871
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== elgato-eyetv-dtt-plain ====
{{DeviceDisplayMedium|elgato-eyetv-dtt-plain}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=elgato-eyetv-dtt-plain
| vendor=[[Elgato]]
| device=[[Elgato EyeTV DTT|EyeTV DTT]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fd9:0021
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=clone of Hauppauge WinTV-NOVA-T
}}

</includeonly><noinclude>

==== elgato-eyetv-dtt-dlx-pd378s ====
{{DeviceDisplayMedium|elgato-eyetv-dtt-dlx-pd378s}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=elgato-eyetv-dtt-dlx-pd378s
| vendor=[[Elgato]]
| device=[[Elgato EyeTV DTT deluxe|EyeTV DTT deluxe (PD378S)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fd9:0020
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== elgato-eyetv-dtt-dlx-v2 ====
{{DeviceDisplayMedium|elgato-eyetv-dtt-dlx-v2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=elgato-eyetv-dtt-dlx-v2
| vendor=[[Elgato]]
| device=[[Elgato EyeTV DTT deluxe v2|EyeTV DTT deluxe v2]]
| standard=DVB-T
| supported=unknown
| pic=
| url=
| hostinterface=USB2.0
| usbid=0fd9:002c
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>

==== leadtek-winfast-dtv-dongle-h ====
{{DeviceDisplayMedium|leadtek-winfast-dtv-dongle-h}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-winfast-dtv-dongle-h
| vendor=Leadtek
| device=WinFast DTV Dongle H
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.31}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0413:60f6
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== yuan-high-tech-stk7700d ====
{{DeviceDisplayMedium|yuan-high-tech-stk7700d}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-stk7700d
| vendor=YUAN High-Tech
| device=STK7700D
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1efc
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== yuan-high-tech-dibcom-stk7700d ====
{{DeviceDisplayMedium|yuan-high-tech-dibcom-stk7700d}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-high-tech-dibcom-stk7700d
| vendor=YUAN High-Tech
| device=DiBcom STK7700D
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1164:1e8c
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-73a ====
{{DeviceDisplayMedium|pinnacle-pctv-73a}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-73a
| vendor=[[Pinnacle]]
| device=PCTV 73A
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0243
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== pinnacle-pctv-73e-se ====
{{DeviceDisplayMedium|pinnacle-pctv-73e-se}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-73e-se
| vendor=[[Pinnacle]]
| device=[[Pinnacle PCTV nano Stick (73e)|PCTV 73e SE (solo)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=[http://www.pctvsystems.com/Products/ProductsEuropeAsia/Digitalproducts/PCTVnanoStickSolo/tabid/176/language/en-GB/Default.aspx]
| hostinterface=USB2.0
| usbid=2304:0245
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=Same as the plain 73e but without remote control, antenna adapter and USB extension cable.
}}

</includeonly><noinclude>

==== pinnacle-pctv-282e ====
{{DeviceDisplayMedium|pinnacle-pctv-282e}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=pinnacle-pctv-282e
| vendor=[[Pinnacle]]
| device=PCTV 282e
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.26}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2304:0248
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== dibcom-stk7770p-reference-design ====
{{DeviceDisplayMedium|dibcom-stk7770p-reference-design}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk7770p-reference-design
| vendor=[[DiBcom]]
| device=STK7770P reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1e80
| hw=
| tuner=
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-t-usb-xxs-hd ====
{{DeviceDisplayMedium|terratec-cinergy-t-usb-xxs-hd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-t-usb-xxs-hd
| vendor=[[TerraTec]]
| device=[[TerraTec Cinergy T USB XXS|Cinergy T USB XXS (HD)]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}}
| pic=[[image:Terratec Cinergy XXS 001.jpg|120px]]
| url=[http://www.terratec.net/en/products/Cinergy_T_USB_XXS_2068.html]
| hostinterface=USB2.0
| usbid=0ccd:00ab
| hw=dib7770
| tuner=dib0070
| demodulator=dib7000p
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

==== dibcom-stk807xpvr-reference-design ====
{{DeviceDisplayMedium|dibcom-stk807xpvr-reference-design}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk807xpvr-reference-design
| vendor=DiBcom
| device=STK807xPVR reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1f98
| hw=
| tuner=
| demodulator=dib8000
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== dibcom-stk807xp-reference-design ====
{{DeviceDisplayMedium|dibcom-stk807xp-reference-design}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-stk807xp-reference-design
| vendor=[[DiBcom]]
| device=STK807xP reference design
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10b8:1f90
| hw=
| tuner=
| demodulator=dib8000
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>
==== prolink-pixelview-sbtvd ====
{{DeviceDisplayMedium|prolink-pixelview-sbtvd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=prolink-pixelview-sbtvd
| vendor=Prolink
| device=Pixelview SBTVD
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.32}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1554:5010
| hw=
| tuner=
| demodulator=dib8000
| usbbridge=dib0700
| fw=dvb-usb-dib0700-1.20.fw
| comment=
}}

</includeonly><noinclude>

=== [[DiBcom DiB3000|DiB3000M-B]] USB1.1 DVB-T devices===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-dib3000mb-based ====
{{DeviceDisplayMedium|avermedia-dib3000mb-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-dib3000mb-based
| vendor=[[AVerMedia]]
| device=AVerTV DVBT USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.avermedia.com/cgi-bin/products_digitvtuner_dvbtusb.asp?show=2]
| hostinterface=USB1.1
| usbid=14aa:0001
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=Whats the Axxx model number of this device? warm usbid 14aa:0002
}}

</includeonly><noinclude>
==== compro-videomate-u2000 ====
{{DeviceDisplayMedium|compro-videomate-u2000}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=compro-videomate-u2000
| vendor=Compro
| device=Videomate DVB-U2000 - DVB-T USB1.1
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.comprousa.com/en/product/vmu2000.html]
| hostinterface=USB1.1
| usbid=185b:d000 145f:010c
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbids: 185b:d001 145f:010c
}}

</includeonly><noinclude>

==== dibcom-dib3000mb-mod3000 ====
{{DeviceDisplayMedium|dibcom-dib3000mb-mod3000}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib3000mb-mod3000
| vendor=[[DiBcom]]
| device=USB1.1 DVB-T reference design (MOD3000)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=10b8:0bb8
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 10b8:0bb9
}}

</includeonly><noinclude>

==== kworld-xpert-dtv-dib3000mb ====
{{DeviceDisplayMedium|kworld-xpert-dtv-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-xpert-dtv-dib3000mb
| vendor=[[KWorld]]
| device=V-Stream XPERT DTV - DVB-T USB1.1
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=eb1a:17de
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: eb1a:17df
}}

</includeonly><noinclude>
==== grandtec-dib3000mb ====
{{DeviceDisplayMedium|grandtec-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=grandtec-dib3000mb
| vendor=Grandtec
| device=USB1.1 DVB-T
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=5032:0fa0 5032:0bb8
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 5032:0fa1 5032:0bb9
}}

</includeonly><noinclude>
==== unknown-dib3000mb ====
{{DeviceDisplayMedium|unknown-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=unknown-dib3000mb
| vendor=Unknown
| device=Unkown USB1.1 DVB-T device ???? please report the name to the author
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=1025:005e
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 1025:005f
}}

</includeonly><noinclude>
==== twinhan-magicbox-i-hama ====
{{DeviceDisplayMedium|twinhan-magicbox-i-hama}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhan-magicbox-i-hama
| vendor=Twinhan
| device=TwinhanDTV USB-Ter USB1.1 (VP7041)/ TwinhanDTV Magic Box I (VP7041e)/ HAMA USB1.1 DVB-T device
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=[http://www.hama.de/bilder/00049/abb/00049021abb.jpg]
| url=[http://www.twinhan.com/product_terrestrial_3.asp] [http://www.twinhan.com/product_terrestrial_5.asp]
| hostinterface=USB1.1
| usbid=13d3:3201 1822:3201
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 13d3:3202 1822:3202
}}

</includeonly><noinclude>

==== artec-t1-an2135 ====
{{DeviceDisplayMedium|artec-t1-an2135}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-an2135
| vendor=[[Artec]]
| device=[[Artec T1 USB TV Box|T1 USB1.1 TVBOX with AN2135]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=05d8:8105
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 05d8:8106
}}

</includeonly><noinclude>

==== videowalker-dib3000mb ====
{{DeviceDisplayMedium|videowalker-dib3000mb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=videowalker-dib3000mb
| vendor=VideoWalker
| device=DVB-T USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.geniusnet.com.tw/product/product-1.asp?pdtno=541]
| hostinterface=USB1.1
| usbid=0458:701e
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-5.0.0.11.fw
| comment=warm usbid: 0458:701f
}}

</includeonly><noinclude>

==== artec-t1-an2235 ====
{{DeviceDisplayMedium|artec-t1-an2235}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-an2235
| vendor=[[Artec]]
| device=[[Artec T1 USB TV Box|T1 USB1.1 TVBOX with AN2235]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1
| usbid=05d8:8107
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-an2235-01.fw
| comment=warm usbid: 05d8:8108
Some "broken" devices where sold with cold id: 0547:2235 . You will need to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY in the kernel .config to catch those.
}}

</includeonly><noinclude>

==== kworld-300u ====
{{DeviceDisplayMedium|kworld-300u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-300u
| vendor=[[KWorld]]
| device=300U/Instant DVB-T USB2.0 PTV-333
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.tv-cards.com/model.php?modelid=162]
| hostinterface=USB2.0
| usbid=06e1:a333
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-adstech-usb2-02.fw
| comment=warm usbid: 06e1:a334
}}

</includeonly><noinclude>
===== adstech-ptv333 =====
{{DeviceDisplayMedium|adstech-ptv333}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=adstech-ptv333
| vendor=ADSTech
| device=Instant DVB-T USB2.0 PTV-333
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=kworld-300u}}
| pic=
| url=[http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333]
| hostinterface=USB2.0
| usbid=06e1:a333
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-adstech-usb2-02.fw
| comment=warm usbid: 06e1:a334
}}

</includeonly><noinclude>

==== kworld-xpert-usb2 ====
{{DeviceDisplayMedium|kworld-xpert-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=kworld-xpert-usb2
| vendor=[[KWorld]]
| device=Xpert DVB-T USB2.0
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.14}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=eb2a:17de
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-adstech-usb2-02.fw
| comment=
}}

</includeonly><noinclude>

==== artec-t1-dib3000mb-usb2 ====
{{DeviceDisplayMedium|artec-t1-dib3000mb-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-dib3000mb-usb2
| vendor=[[Artec]]
| device=T1 USB2.0
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.15}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=05d8:8109
| hw=[[DiBcom DiB3000|DiBcom 3000M-B]]
| tuner=
| demodulator=dib3000mb
| usbbridge=dib3000mb
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid: 05d8:810a
}}

</includeonly><noinclude>

=== [[DiBcom DiB3000|DiB3000M-C/P]] USB2.0 DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== dibcom-dib3000mc-mod3000p ====
{{DeviceDisplayMedium|dibcom-dib3000mc-mod3000p}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dibcom-dib3000mc-mod3000p
| vendor=[[DiBcom]]
| device=USB2.0 DVB-T reference design (MOD3000P)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=10b8:0bc6
| hw=Panasonic tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid: 10b8:0bc7
}}

</includeonly><noinclude>

==== artec-t1-3000mc-usb2 ====
{{DeviceDisplayMedium|artec-t1-3000mc-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t1-3000mc-usb2
| vendor=[[Artec]]
| device=T1 USB2.0 TVBOX
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=05d8:8109
| hw=Panasonic tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=Author says: Please check the warm ID.( is it 05d8:810a ?)
}}

</includeonly><noinclude>
==== lite-on-dib3000mc ====
{{DeviceDisplayMedium|lite-on-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=lite-on-dib3000mc
| vendor=LITE-ON
| device=USB2.0 DVB-T Tuner
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=[[image:Dvb-t-usb-toshiba-px1211e-1tvd-001.jpg|120px]]
| url=
| hostinterface=USB1.1 USB2.0
| usbid=04ca:f000
| hw=
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 04ca:f001 Also rebranded as "Intuix Tv Tuner Tnt S800", "Toshiba USB DVB-T Tuner PX1211E-1TVD", and "Medion USB DVB-T TV Tuner"
}}

</includeonly><noinclude>

==== msi-digivox-mini-sl ====
{{DeviceDisplayMedium|msi-digivox-mini-sl}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-sl
| vendor=[[MSI]]
| device=Digivox Mini SL
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=[http://www1.conrad.de/xl/9000_9999/9900/9940/9949/994904_BB_00_FB.EPS.jpg]
| url=
| hostinterface=USB1.1 USB2.0
| usbid=eb1a:e360
| hw=
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid eb1a:e361
}}

</includeonly><noinclude>

==== grand-dib3000mc ====
{{DeviceDisplayMedium|grand-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=grand-dib3000mc
| vendor=GRAND
| device=USB2.0 DVB-T adapter
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=[http://www.grand.com.tw/en/product_form.asp?lwk_series=54&lwk_product=h-005&lwk_page=1]
| url=
| hostinterface=USB1.1 USB2.0
| usbid=5032:0bc6
| hw=
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 5032:0bc7
}}

</includeonly><noinclude>
==== artec-t14-dib3000mc-based ====
{{DeviceDisplayMedium|artec-t14-dib3000mc-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=artec-t14-dib3000mc-based
| vendor=[[Artec]]
| device=T14
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=[http://www.artec.com.tw/ehtm/be122.htm]
| hostinterface=USB1.1 USB2.0
| usbid=05d8:810b
| hw=MT2060 silicon tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 05d8:810c Based on the DiBcom DVB-T USB 2.0 reference design.
}}

</includeonly><noinclude>

==== leadtek-dib3000mc-based ====
{{DeviceDisplayMedium|leadtek-dib3000mc-based}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=leadtek-dib3000mc-based
| vendor=[[Leadtek]]
| device=USB2.0 Winfast DTV dongle (STK3000P based)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=231]
| hostinterface=USB1.1 USB2.0
| usbid=0413:6025
| hw=MT2060 silicon tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=warm usbid 0413:6026
}}

</includeonly><noinclude>
==== yuan-pd300-dib3000mc ====
{{DeviceDisplayMedium|yuan-pd300-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=yuan-pd300-dib3000mc
| vendor=YUAN High-Tech
| device=PD300 DVB-T mobility
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| hostinterface=USB1.1 USB2.0
| url=[http://www.linuxtv.org/pipermail/linux-dvb/2006-March/008936.html] [http://www.yuan.com.tw/en/products/vdo_pd300mini.htm]
| usbid=10b8:0bc6
| hw=MT2060 silicon tuner, [[DiBcom DiB3000|DiB3000M-C/P]]
| tuner=mt2060
| demodulator=dib3000mc
| usbbridge=dib3000mc
| fw=dvb-usb-dibusb-6.0.0.8.fw
| comment=same usbid as ref design, but different tuner, yikes! warm usbid: 10b8:0bc7
}}

</includeonly><noinclude>

===== clones =====
</noinclude><includeonly>

</includeonly><noinclude>
====== toshiba-px1211e-1tvd ======
{{DeviceDisplayMedium|toshiba-px1211e-1tvd}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=toshiba-px1211e-1tvd
| vendor=Toshiba
| device=PX1211E-1TVD USB DVB-T Tuner
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=lite-on-dib3000mc}}
| hostinterface=USB1.1 USB2.0
}}

</includeonly><noinclude>

====== intuix-tnt-s800 ======
{{DeviceDisplayMedium|intuix-tnt-s800}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=intuix-tnt-s800
| vendor=Intuix
| device=Tv Tuner Tnt S800
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=lite-on-dib3000mc}}
| hostinterface=USB1.1 USB2.0
}}

</includeonly><noinclude>
====== medion-95733-95713 ======
{{DeviceDisplayMedium|medion-95733-95713}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=medion-95733-95713
| vendor=Medion
| device=USB DVB-T TV Tuner (MD95733/MD95713)
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=lite-on-dib3000mc}}
| hostinterface=USB1.1 USB2.0
}}

</includeonly><noinclude>
====== typhoon-tv-movie-dib3000mc ======
{{DeviceDisplayMedium|typhoon-tv-movie-dib3000mc}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=typhoon-tv-movie-dib3000mc
| vendor=Typhoon
| device=TV MOVIE STICK
| url=[http://www.typhoon.de/en/art.php?p=826&c=]
| standard=DVB-T
| supported={{Clone of|src=USB_Device_Data|did=msi-digivox-mini-sl}}
| hostinterface=USB1.1 USB2.0
| comment="Art. 50506"
}}

</includeonly><noinclude>

=== Nebula DigiTV USB version - DVB-T ===
</noinclude><includeonly>

</includeonly><noinclude>
==== nebula-micro-digitv-usb ====
{{DeviceDisplayMedium|nebula-micro-digitv-usb}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=nebula-micro-digitv-usb
| vendor=[[Nebula]]
| device=micro-DigiTV USB
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.nebula-electronics.com/information/info.asp?Code=0003]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]] or NxtWave(now ATI/AMD) Nxt6000
| tuner=
| demodulator=mt352, nxt6000
| usbbridge=
| fw=dvb-usb-digitv-01.fw
| comment=The device is also called "µDigiTV" (using the micro symbol instead of spelling it out). There is an SDK for download on the Nebula WebSite, which was used to improve the driver's quality. Was the first USB2.0 box on the market (late 2003/early 2004).
}}

</includeonly><noinclude>

=== dtt200u.c WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices===
</noinclude><includeonly>

</includeonly><noinclude>
==== wideview-wt200u ====
{{DeviceDisplayMedium|wideview-wt200u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-wt200u
| vendor=WideView/YUAN/Yakumo/Hama/Typhoon
| device=DVB-T USB2.0 (WT-200U)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:0201
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-dtt200u-01.fw
| comment=warm usbid 14aa:0301
}}

</includeonly><noinclude>
==== wideview-wt220u ====
{{DeviceDisplayMedium|wideview-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-wt220u
| vendor=WideView
| device=WT-220U PenType Receiver (Typhoon/Freecom)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:0222 14aa:0220
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-02.fw
| comment=warm usbid 14aa:0221. Support for Club3D Zap 250 (14aa:0220) added in 2.6.19 Hardware. PID filter table count 15 - limited to about 3 or 4 simultaneous TV channels.
}}

</includeonly><noinclude>
==== wideview-zl353-wt220u ====
{{DeviceDisplayMedium|wideview-zl353-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-zl353-wt220u
| vendor=WideView
| device=WT-220U PenType Receiver (based on ZL353)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:022a
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-zl0353-01.fw
| comment=warm usbid 14aa:022b
}}

</includeonly><noinclude>
==== wideview-fc-wt220u ====
{{DeviceDisplayMedium|wideview-fc-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=wideview-fc-wt220u
| vendor=Freecom
| device=DVB-T (WT-220U PenType Receiver)
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.19}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=14aa:0225
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-fc03.fw
| comment=warm usbid 14aa:0226
}}

</includeonly><noinclude>
==== miglia-wt220u ====
{{DeviceDisplayMedium|miglia-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=miglia-wt220u
| vendor=Miglia
| device=WT-220U PenType Receiver
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.24}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=18f3:0220
| hw=
| tuner=dtt200u
| demodulator=dtt200u
| usbbridge=
| fw=dvb-usb-wt220u-miglia-01.fw
| comment=warm usbid 14aa:022b(according to a comment in the code)
}}

</includeonly><noinclude>

=== m920x devices ===

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/media/dvb/dvb-usb/m920x.c
</noinclude><includeonly>

</includeonly><noinclude>
==== msi-mega-sky-580 ====
{{DeviceDisplayMedium|msi-mega-sky-580}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-mega-sky-580
| vendor=[[MSI]]
| device=Mega Sky 580
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.21}}
| pic=
| url=
| hostinterface=USB1.1 USB2.0
| usbid=0db0:5580
| hw=tuner: qt1010 demodulator: mt352 USB Bridge: ULi M9206
| tuner=qt1010
| demodulator=mt352
| usbbridge=m920x
| fw=dvb-usb-megasky-02.fw
| comment=Apparently the [[MSI Mega Sky 55801]] is sold under the same name. At least they have a different usb id.
}}

</includeonly><noinclude>

==== lifeview-lr540 ====
{{DeviceDisplayMedium|lifeview-lr540}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=lifeview-lr540
| vendor=[[LifeView]]
| device=[[LifeView TV Walker Twin DVB-T (LR540)|TV Walker Twin DVB-T (LR540)]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}(one tuner) {{Supported_in_Kernel|since=2.6.23}}(both tuners)
| pic=[[image:LifeView TV Walker Twin.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=10fd:0513
| hw=tuner: 2x[[NXP/Philips_TDA827x|NXP/Philips 8275AC1]] demodulator: 2xNXP/Philips TDA10046A USB Bridge: ULi M9206
| tuner=tda8275
| demodulator=tda1004x
| usbbridge=m920x
| fw=dvb-usb-tvwalkert.fw
| comment=
}}

</includeonly><noinclude>
==== zappa-lr523 ====
{{DeviceDisplayMedium|zappa-lr523}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=zappa-lr523
| vendor=Zappa
| device=[[LifeView TV Walker Twin DVB-T (LR540)#Zappa_DVB-T_USB_LR523|DVB-T USB LR523]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10fd:0513
| hw=tuner: [[NXP/Philips_TDA827x|NXP/Philips 8275AC1]] demodulator: NXP/Philips TDA10046A USB Bridge: ULi M9206
| tuner=tda8275
| demodulator=tda1004x
| usbbridge=m920x
| fw=dvb-usb-tvwalkert.fw
| comment=
}}

</includeonly><noinclude>
==== msi-digivox-mini-ii-v1 ====
{{DeviceDisplayMedium|msi-digivox-mini-ii-v1}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-digivox-mini-ii-v1
| vendor=[[MSI]]
| device=[[MSI DigiVox mini II|DIGI VOX mini II]]
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=10fd:1513
| hw=tuner: [[NXP/Philips_TDA827x|NXP/Philips 8275AC1]] demodulator: NXP/Philips TDA10046A USB Bridge: ULi M9206
| tuner=tda8275
| demodulator=tda1004x
| usbbridge=m920x
| fw=dvb-usb-digivox-02.fw
| comment=
}}

</includeonly><noinclude>
==== dposh-920x ====
{{DeviceDisplayMedium|dposh-920x}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dposh-920x
| vendor=Dposh
| device=DVB-T USB2.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.22}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=1498:9206
| hw=tuner: qt1010 demodulator: mt352 USB Bridge: ULi M9206
| tuner=qt1010
| demodulator=mt352
| usbbridge=m920x
| fw=dvb-usb-dposh-01.fw
| comment=
}}

</includeonly><noinclude>
=== Hauppauge WinTV-NOVA-T usb2 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== hauppauge-wintv-nova-t-usb2 ====
{{DeviceDisplayMedium|hauppauge-wintv-nova-t-usb2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-wintv-nova-t-usb2
| vendor=[[Hauppauge]]
| device=[[Hauppauge WinTV-NOVA-T-USB2|WinTV-NOVA-T USB2]]
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:9300
| hw=dib3000mc
| tuner=dib3000mc
| demodulator=dib3000mc
| usbbridge=
| fw=dvb-usb-nova-t-usb2-02.fw
| comment=
}}

</includeonly><noinclude>

=== HanfTek UMT-010 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== hanftek-umt-010 ====
{{DeviceDisplayMedium|hanftek-umt-010}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hanftek-umt-010
| vendor=Hanftek
| device=UMT-010
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.13}}
| pic=
| url=[http://www.hanftek.com/] [http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014259.html]
| hostinterface=USB2.0
| usbid=15f4:0001
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=dib3000mc
| fw=dvb-usb-umt-010-02.fw
| comment=Stick-sized. Different colours (blue, grey, red). USBID: 15f4:0001(cold) 15f4:0015(warm)
}}

</includeonly><noinclude>

=== MSI Mega Sky 55801 DVB-T USB2.0 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== msi-mega-sky-55801 ====
{{DeviceDisplayMedium|msi-mega-sky-55801}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=msi-mega-sky-55801
| vendor=[[MSI]]
| device=[[MSI Mega Sky 55801|Mega Sky 55801]] DVB-T USB2.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.21}}
| pic=[[image:MSIMegasky55801-exterior-small.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=0db0:5581
| hw=[[Zarlink ZL10353]] Tuner: Quantek QT1010 USB bridge: Genesys Logic GL861
| tuner=qt1010
| demodulator=zl10353
| usbbridge=gl861
| fw=none needed
| comment=The QT1010 in this device has it's problems. If you get no or poor signal on Linux, that's "normal". You can try lowering the signal strength from your antenna, remove signal boosters and/or buy an attenuator. Or buy a device with better support.
}}

</includeonly><noinclude>

==== a-link-dtu-dvb-t-no-postfix ====
{{DeviceDisplayMedium|a-link-dtu-dvb-t-no-postfix}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=a-link-dtu-dvb-t-no-postfix
| vendor=A-LINK
| device=DTU DVB-T USB2.0
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.23}}
| pic=[[image:A-LINK DTU-002.jpg|120px]]
| url=
| hostinterface=USB2.0
| usbid=05e3:f170
| hw=[[Zarlink ZL10353]] Tuner: Quantek QT1010 USB bridge: Genesys Logic GL861
| tuner=qt1010
| demodulator=zl10353
| usbbridge=gl861
| fw=none needed
| comment=This is neither the "A-LINK DTU(m)" (which is a AF9015 device) nor the "A-LINK DTU(h)" (which from the pictures I've seen, looks very much like a re-branded "GeniaTech T328B").
}}

</includeonly><noinclude>

=== Twinhan DVB-T USB2.0 ===
</noinclude><includeonly>

</includeonly><noinclude>
==== digitalnow-tinyusb-2 ====
{{DeviceDisplayMedium|digitalnow-tinyusb-2}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalnow-tinyusb-2
| vendor=DigitalNow
| device=TinyUSB 2 DVB-t
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.digitalnow.com.au/product_images/tinyusb2-device.jpg]
| url=[http://www.digitalnow.com.au/product_pages/tinyusb2.html]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=
}}

</includeonly><noinclude>
==== digitalrise-ter-beetle ====
{{DeviceDisplayMedium|digitalrise-ter-beetle}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=digitalrise-ter-beetle
| vendor=DigitalRise
| device=DVB-T USB 2.0 Ter Beetle
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.digitalrise.biz/images/products/dvb_tuner/ter/usb2/large.jpg]
| url=[http://www.digitalrise.biz/products/dvb_tuner/ter/usb2/]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=Looks like a clone of the DigitalNow TinyUSB 2 DVB-t.
}}

</includeonly><noinclude>
==== dnt-euromini-100 ====
{{DeviceDisplayMedium|dnt-euromini-100}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=dnt-euromini-100
| vendor=dnt
| device=EuroMini 100
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=Looks like clone of TwinhanDTV Alpha
}}

</includeonly><noinclude>
==== fujitsu-siemens-dvbt-mobile-tv-tuner ====
{{DeviceDisplayMedium|fujitsu-siemens-dvbt-mobile-tv-tuner}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=fujitsu-siemens-dvbt-mobile-tv-tuner
| vendor=Fujitsu-Siemens
| device=DVB-T Mobile TV Tuner
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[[Image:Fujitsu-Siemens-DVB-T-Mobile-001.jpg|120px]]
| url=[http://www.fujitsu-siemens.de/home/products/accessories/others/dvb_t_mobile.html de] [http://www.fujitsu-siemens.com/home/products/others/dvb_t_mobile.html en]
| hostinterface=USB2.0
| usbid=13d3:3205
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=Looks like clone of TwinhanDTV Alpha
}}

</includeonly><noinclude>

==== twinhandtv-alpha-rev7045 ====
{{DeviceDisplayMedium|twinhandtv-alpha-rev7045}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhandtv-alpha-rev7045
| vendor=TwinhanDTV
| device=Alpha
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.twinhan.com/Images/products/TwinHanDTV-alpha_B.jpg]
| url=[http://www.twinhan.com/product_terrestrial_7.asp]
| hostinterface=USB2.0
| usbid=13d3:3205
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment='''It seems that some TwinhanDTV Alphas(rev 7045A) need newer firmware. 7045A sticks have another frontend and need another firmware. The 7045A frontend is tda10046 based. ''' The symptoms are that they can not find any channels. Consequently, they are unusable at the moment. See these posts for more details: [http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014202.html][http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014226.html][http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015145.html][http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015222.html]
}}

</includeonly><noinclude>
==== twinhandtv-magicboxii ====
{{DeviceDisplayMedium|twinhandtv-magicboxii}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=twinhandtv-magicboxii
| vendor=TwinhanDTV
| device=MagicBox II
| standard=DVB-T
| supported={{Supported_in_Kernel|since=2.6.13}}
| pic=[http://www.twinhan.com/Images/products/TwinhanDTV-MagicBox2_B.jpg]
| url=[http://www.twinhan.com/product_terrestrial_6.asp]
| hostinterface=USB2.0
| usbid=
| hw=[[Zarlink MT352]]
| tuner=
| demodulator=mt352
| usbbridge=vp7045
| fw=dvb-usb-vp7045-01.fw
| comment=
}}

</includeonly><noinclude>

=== WideView/Yakumo/Hama/Typhoon/Yuan Boxes and Pens ===
</noinclude><includeonly>

</includeonly><noinclude>
==== bestbuy-easy-tv-wt220u ====
{{DeviceDisplayMedium|bestbuy-easy-tv-wt220u}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=bestbuy-easy-tv-wt220u
| vendor=Bestbuy
| device=Easy TV
| standard=DVB-T
| supported={{yes}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=dvb-usb-wt220u-02.fw
| comment=This is a WideView WT-220U PenType Receiver (Typhoon/Freecom).
}}

</includeonly><noinclude>
=== Supported Em2880/Em2870 Based USB DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== bestbuy-easy-tv-hybrid ====
{{DeviceDisplayMedium|bestbuy-easy-tv-hybrid}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=bestbuy-easy-tv-hybrid
| vendor=BestBuy
| device=Easy TV USB hybrid
| standard=DVB-T
| supported={{Supported_in_External|since=?|url=http://mcentral.de/wiki/index.php5/Em2880}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=eb1a:2881
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

</includeonly><noinclude>
=== AME DTV-5100 / TechGear DigitalTV Stick (TGTV-490) ===
</noinclude><includeonly>

</includeonly><noinclude>
==== ame-dtv-5100 ====
{{DeviceDisplayMedium|ame-dtv-5100}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=ame-dtv-5100
| vendor=AME
| device=DTV-5100
| standard=DVB-T
| supported={{Supported in Kernel|since=2.6.28}}
| pic=[[image:AME-dtv-5100-001.jpg|120px]]
| url=[http://www.ame-group.com/dtv_5100.htm] [http://royale.zerezo.com/dtv5100/] [http://www.tatatou.org/dotclear/index.php?2008/08/26/162-tuto-premier-jet]
| hostinterface=USB2.0
| usbid=06be:a232
| hw=qt1010, zl10353 (WJCE6353), CY7C68013A
| tuner=qt1010
| demodulator=zl10353
| usbbridge=
| fw=none needed
| comment=Also sold as "TechGear DigitalTV Stick (TGTV-490)"
}}

</includeonly><noinclude>

=== AVerMedia AverTV Hybrid Volar HX (A827) ===
</noinclude><includeonly>

</includeonly><noinclude>
==== avermedia-a827 ====
{{DeviceDisplayMedium|avermedia-a827}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=avermedia-a827
| vendor=[[AVerMedia]]
| device=[[AVerMedia AverTV Hybrid Volar HX (A827)|AverTV Hybrid Volar HX (A827)]]
| standard=DVB-T, ANALOG, FM
| supported={{Supported by Vendor|text=[[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=293&tab=APDriver]]}}
| pic=[http://www.avermedia.com/avertv/Upload/ProductImages/A827%20Renew%20300.jpg]
| url=[http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=293]
| hostinterface=USB2.0
| usbid=07ca:a827
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=none needed
| comment=
}}

</includeonly><noinclude>
=== Supported TM5600/6000/6010 Based USB DVB-T devices ===
</noinclude><includeonly>

</includeonly><noinclude>
==== terratec-cinergy-hybrid-xe ====
{{DeviceDisplayMedium|terratec-cinergy-hybrid-xe}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-hybrid-xe
| vendor=Terratec
| device=Cinergy Hybrid XE
| standard=DVB-T, ANALOG
| supported={{Supported in Kernel|since=2.6.35}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=0ccd:0086
| hw=
| tuner=xc3028L
| demodulator=ZL10353
| usbbridge=tm6010
| fw=xc3028L-v36.fw
| comment=
}}

</includeonly><noinclude>
==== terratec-cinergy-hybrid-stick ====
{{DeviceDisplayMedium|terratec-cinergy-hybrid-stick}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=terratec-cinergy-hybrid-stick
| vendor=Terratec
| device=Cinergy Hybrid Stick
| standard=DVB-T, ANALOG
| supported={{Supported in Kernel|since=2.6.35}}
| pic=[http://www.terratec.net/en/products/pictures/img/2418555_24d41902b7.png]
| url=[http://www.terratec.net/en/products/Cinergy_Hybrid_Stick_82268.html]
| hostinterface=USB2.0
| usbid=0ccd:00a5
| hw=
| tuner=xc3028L
| demodulator=ZL10353
| usbbridge=TM6010
| fw=xc3028L-v36.fw
| comment=
}}

</includeonly><noinclude>
==== hauppauge-wintv-hvr900h ====
{{DeviceDisplayMedium|hauppauge-wintv-hvr900h}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=hauppauge-wintv-hvr900h
| vendor=Hauppauge
| device=WinTv HVR-900H
| standard=DVB-T, ANALOG
| supported={{Supported in Kernel|since=2.6.35}}
| pic=
| url=
| hostinterface=USB2.0
| usbid=2040:6600
| hw=
| tuner=xc3028L
| demodulator=zl10353
| usbbridge=TM6010
| fw=xc3028L-v36.fw
| comment=
}}

</includeonly>