Stk1160 based USB 2.0 video and audio capture devices

From LinuxTVWiki
Revision as of 14:50, 16 August 2012 by Andlandl (talk | contribs) (Switch to template)
Jump to navigation Jump to search

This article covers all the tunerless USB 2.0 video and audio capture devices which are based on the STK1160 chip. This device is convenient for capturing from cameras, VHS-tapes, receivers ... and even for small surveillance installation (4 inputs model).

Many but not all of these devices are branded as Easycap. Althought this device is sold with different names and labels, in many forums and blogs this device is called "EasyCAP DC60".



Overview/Features

  • USB ID 05e1:0408
  • USB 2.0 interface (USB 1.1 will not work, it's too slow).
  • Inputs: (Model 001) CVBS, S-VIDEO, AUDIO(L), AUDIO(R)
  • Inputs: (Model 002) 4 yellow input cables (CVBS) labelled 1, 2, 3, 4 and one white unlabelled audio cable
  • Audioquality: Model 001 has AC'97 audio (48000 Hz samplerate), model 002 (and some models 001 where the AC'97 chip is missing) has mono microphone audio (8000 Hz samplerate).

Components Used

  • Syntek STK1160 (USB video bridge)
  • Silan SC8113 (Philips SAA7113 compatible video decoder)
  • AC'97 audio processor (from different manufacturers. In models where this chip is missing audio capturing is done by the STK1160 chips built-in ADC for mono microphone audio recording.)

Other Images

Identification

The following lsusb output is from the STK1160 based model 001 with builtin AC'97 audio processor:

# lsusb -v
Bus 001 Device 002: ID 05e1:0408 Syntek Semiconductor Co., Ltd STK1160 Video Capture Device
Couldn't open device, some information will be missing
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0 
 bDeviceProtocol         0 
 bMaxPacketSize0        64
 idVendor           0x05e1 Syntek Semiconductor Co., Ltd
 idProduct          0x0408 STK1160 Video Capture Device
 bcdDevice            0.05
 iManufacturer           1 
 iProduct                2 
 iSerial                 0 
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength          251
   bNumInterfaces          3
   bConfigurationValue     1
   iConfiguration          0 
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              500mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0000  1x 0 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0000  1x 0 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       1
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0300  1x 768 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       2
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x03fc  1x 1020 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       3
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0400  1x 1024 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       4
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0c00  2x 1024 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       5
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x1400  3x 1024 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        1
     bAlternateSetting       0
     bNumEndpoints           0
     bInterfaceClass         1 Audio
     bInterfaceSubClass      1 Control Device
     bInterfaceProtocol      0 
     iInterface             11 
     AudioControl Interface Descriptor:
       bLength                 9
       bDescriptorType        36
       bDescriptorSubtype      1 (HEADER)
       bcdADC               1.00
       wTotalLength           38
       bInCollection           1
       baInterfaceNr( 0)       2
     AudioControl Interface Descriptor:
       bLength                12
       bDescriptorType        36
       bDescriptorSubtype      2 (INPUT_TERMINAL)
       bTerminalID             1
       wTerminalType      0x0602 Digital Audio Interface
       bAssocTerminal          0
       bNrChannels             2
       wChannelConfig     0x0003
         Left Front (L)
         Right Front (R)
       iChannelNames           0 
       iTerminal               0 
     AudioControl Interface Descriptor:
       bLength                 9
       bDescriptorType        36
       bDescriptorSubtype      3 (OUTPUT_TERMINAL)
       bTerminalID             2
       wTerminalType      0x0101 USB Streaming
       bAssocTerminal          0
       bSourceID               3
       iTerminal               0 
     AudioControl Interface Descriptor:
       bLength                 8
       bDescriptorType        36
       bDescriptorSubtype      6 (FEATURE_UNIT)
       bUnitID                 3
       bSourceID               1
       bControlSize            1
       bmaControls( 0)      0x01
         Mute Control
       iFeature                0 
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        2
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         1 Audio
     bInterfaceSubClass      2 Streaming
     bInterfaceProtocol      0 
     iInterface             11 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            5
         Transfer Type            Isochronous
         Synch Type               Asynchronous
         Usage Type               Data
       wMaxPacketSize     0x0000  1x 0 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        2
     bAlternateSetting       1
     bNumEndpoints           1
     bInterfaceClass         1 Audio
     bInterfaceSubClass      2 Streaming
     bInterfaceProtocol      0 
     iInterface             11 
     AudioStreaming Interface Descriptor:
       bLength                 7
       bDescriptorType        36
       bDescriptorSubtype      1 (AS_GENERAL)
       bTerminalLink           2
       bDelay                  1 frames
       wFormatTag              1 PCM
     AudioStreaming Interface Descriptor:
       bLength                11
       bDescriptorType        36
       bDescriptorSubtype      2 (FORMAT_TYPE)
       bFormatType             1 (FORMAT_TYPE_I)
       bNrChannels             2
       bSubframeSize           2
       bBitResolution         16
       bSamFreqType            1 Discrete
       tSamFreq[ 0]        48000
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            5
         Transfer Type            Isochronous
         Synch Type               Asynchronous
         Usage Type               Data
       wMaxPacketSize     0x0100  1x 256 bytes
       bInterval               4
       AudioControl Endpoint Descriptor:
         bLength                 7
         bDescriptorType        37
         bDescriptorSubtype      1 (EP_GENERAL)
         bmAttributes         0x00
         bLockDelayUnits         0 Undefined
         wLockDelay              0 Undefined


Making it Work

STK1160 based devices ar supported under Linux since kernel 2.6.38

Firmware

For this device no firmware is needed.

Drivers

eaysycap driver

The easycap driver is part of the current kernel (since 2.6.38) and supports all the features of the STK1160 based devices but has some limitations (framedropping, stability, sound issues).

stk1160 driver

The stk1160 driver is the successor of the easycap driver. It supports video capturing and audio capturing via ALSA. This driver doesn't suffer from the limitations of the easycap driver but is still under development. It is intended that the stk1160 module will replace the easycap module in one of the next kernel releases.

stk1160 github repository

stk1160 sourcecode-zipball for kernel 3.2

Additional installation instructions


Sample Kernel Output

# dmesg when the easycap driver is loaded
# dmesg when the stk1160 driver is loaded
[16873.944081] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[16874.892446] Linux video capture interface: v2.00
[16875.012940] usb 1-2: New device Syntek Semiconductor USB 2.0 Video Capture Controller @ 480 Mbps (05e1:0408, interface 0, class 0)
[16875.012949] usb 1-2: video interface 0 found
[16875.836259] saa7115 14-0025: saa7113 found (1f7113d0e100000) @ 0x4a (stk1160)
[16877.372155] stk1160: driver ver 0.9.3 successfully loaded
[16877.469999] stk1160: registers to NTSC like standard
[16877.792436] stk1160 1-2:1.0: V4L2 device registered as video0
[16877.793733] usbcore: registered new interface driver snd-usb-audio
[16877.795409] usbcore: registered new interface driver stk1160

Remote Control Support

This device doesn't support a remote control


External Links

Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:


Finally, the very last thing is to add a category. (Remove the nowiki tags). For example
[[Category:DVB-T PCI Devices]]





How to identify your device

When lsusb reports the following output you have an STK1160 based video capture card:

 Bus 001 Device 002: ID 05e1:0408 Syntek Semiconductor Co., Ltd STK1160 Video Capture Device

Hardware

On the board of this USB 2.0 video capture device there is on the front side a green LED, the STK1160 USB Bridge and a SAA7113 compatible video processing chip (silan sc8113) and on the back side a AC97 audio chip (this chip is missing on the 8000 Hz audio models of this device). Dc60-front.jpg Dc60-back.jpg

Drivers

eaysycap driver

The easycap driver is part of the current kernel (since 2.6.38) and supports all the features of the STK1160 based devices but has some limitations (framedropping, stability, sound issues).

stk1160 driver

The stk1160 driver is the successor of the easycap driver. It supports video capturing and audio capturing via ALSA. This driver doesn't suffer from the limitations of the easycap driver but is still under development. It is intended that the stk1160 module will replace the easycap module in one of the next kernel releases.

stk1160 github repository

stk1160 sourcecode-zipball for kernel 3.2

Additional installation instructions

Models

Easycap.png

These known STK1160 based models of the video capture device are supported by the above mentioned drivers. All models do have the same USB device ID: 05e1:0408.

  • Model 001 with input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R) and 48000 Hz audio (AC'97 audio)
  • Model 002 with 4 yellow input cables (CVBS) labelled 1, 2, 3, 4 and one white unlabelled audio cable and 8000 Hz audio (microphone audio)
  • Model 001m with input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R) and 8000 Hz audio (microphone audio)

(Obviously this device has the board of Model 002 but the cables of Model 001)

Identify the audiotype of your device

The following shell command reports the audiorate (sampling frequency) of your STK1160 based device: (48000 = Model 001; 8000 = Model 001m or Model 002).

lsusb -v -d 05e1:0408 | grep tSamFreq | sed -e "s,^.* ,,"

If you encounter audio problems while capturing you need to specify the correct audiorate of your model in the capturing program.

Video inputs (channels)

From the two or four video cables on the device only one (!) can be used at the same time. If you want to switch through the different inputs of your card you need to start the capturing program again with the next input number.

Usage

The STK1160 device needs a USB 2.0 capable USB port. USB 1.1 will not work (it's too slow).

The driver for the STK1160 device creates a /dev/videoN node and an ALSA soundcard, The different video-inputs of the device can be accessed by their inputnumber (starting at 0).

In the viewing/ capturing program (e.g. mplayer) you must specify

  • the videodevicenode of the STK1160 card (/dev/videoN),
  • the input number of the cable where the source is plugged in,
  • the TV norm of the videosource and (e.g. PAL, NTSC)
  • the ALSA sounddevice if you want to capture audio (get a list with this command: cat /proc/asound/cards).

Example for mplayer

Assumed that your STK1160 device is the second videodevice (the first is your webcam) and the second soundcard on your system, and that on the first CVBS input a PAL camera is plugged in and sound also comes from the STK1160 device, the mplayer command for viewing would look like this:

mplayer tv:// -tv driver=v4l2:norm=PAL:width=720:height=576:outfmt=uyvy:device=/dev/video1:input=0:\
alsa:adevice=hw.1:forceaudio:immediatemode=0 -ao sdl

More programs

These programs are known to be useful for analogue audio- and videocapturing with STK1160 based (and similar) devices.

  • qv4l2 - useful for testing
  • mplayer and mencoder
  • mtvcgui - Python GUI for mplayer and mencoder
  • VLC
  • TVtime
  • avconv (libav; formerly ffmpeg)
  • Zoneminder - Linux surveillance suite
  • Any other program which is capable of analogue video- and audiocapturing will probably work with STK1160 devices.

Short linux driver history

In early 2010 Mike Thomas started developing a driver for the stk1160 based video capture device which is sold as EasyCAP DC60. Since the driver (version 0.9) has been added to the staging directory of the Linux kernel in November 2011 Mike Thomas stopped his development and support for the easycapdriver.

Some people added changes in order to clean up the sourcecode. These changes didn't hardly affect the limitations (framedropping, stability) of the driver.

At the middle of 2012 Ezequiel Garcia decided to rework the easycapdriver. He changed the drivers name to "stk1160".

In one of the next kernel releases (3.6/7) the stk1160 driver will come into mainlaine and replace the old easycapdriver.