Talk:Main Page

From LinuxTVWiki
Revision as of 10:10, 25 June 2006 by Claude (Talk | contribs)

Jump to: navigation, search

I am p_Sa~~

Hello, please help me:) I have DVB - Skystar2 and Fedora 3 (Linux itv 2.6.11-1.14_FC3) I running DVB and read in dmesg next log...

PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10 drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters DVB: registering new adapter (SkyStar2). i2c_readbytes: i2c read error (addr 0a, err == -121) DVB: registering frontend 0 (ST STV0299 DVB-S)... i2c-sis96x version 1.0.0 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400


tcpdump -i dvb0_0 -n -e

  1. DVB get 50-100 packets and go down

KaxTV

Should the entry of KaxTV not be removed in the main listing if it is discontinued and now part of Kaffeine?

Use case page for linux tv

Hello

I was thinking about creating a page that would list working solutions for various encrypted operators across the world. This would be structured something like:

  • Section Country
  • sub-section: Operator
  • A table for budget card that would contain: software, card, CAM type, CAM brand, comments
  • A likewise table for FF cards.

What do you think about such a page ?

Cheers

-- would be very helpful I find. BTW, I think we should have the wiki-typical "just do it" approach here, i.e. don't ask - if you think it'd be useful and help others, yes, write it up! --LAk loho 23:42, 24 April 2006 (CEST)

Long software list on it's own page?

Hi! I was thinking the software list on the main page gets too long. At the same time, not all software is helpful for all users (analogue, FF or budget cards). So does anyone mind if I move all links to a separate page, where there'd be comments on each program? --LAk loho 23:42, 24 April 2006 (CEST)

-- By comments, do you mean a one line description for the software or longer comments ? --Ddumont 14:23, 25 April 2006 (CEST)

I thought of something like one line for each program or maybe a table. Longer descriptions are/should be available on the individual program's page so there's no real need. --LAk loho 21:18, 29 April 2006 (CEST)

Toshiba DVB-T Tuner

Hello! I'd like to have some informations about how I can configure the usb tuner Toshiba with Ubuntu. Can anybody help me? Thanks a lot

Leadtek DTV1000 Remote Control

Hi,

I have been working for a while in developing the code for the Leadtek DTV1000 remore control. I think is almost ready (it works for me), maybe someone can double check it for me. How do I do I contribute to the project?

Thanks


probleme with

dvb: Leadtek Winfast DTV dongle driver: v4l-dvb-stk3000p-e5798f307b00 firmware: dvb-usb-dibusb-6.0.0.8.fw distrib: ubuntu 6.6 5.10 fc5

good aerial (very good reception with other dvb and analog) try anyway with ampli and atenuation

i can scan only 2 freq on 5 (freq under 500 mega) the tzap on a good or no good channel is very unstable:

claude@ch:~$ tzap TF1 (this channel do not work) using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 562000000 Hz video pid 0x0078, audio pid 0x0082 status 02 | signal b237 | snr 0000 | ber 001fffff | unc 0000ffff | status 1e | signal b231 | snr 0000 | ber 001fffff | unc 0000ffff | FE_HAS_LOCK status 1e | signal ff3f | snr 0001 | ber 00000000 | unc 00000ef5 | FE_HAS_LOCK status 1e | signal 0000 | snr ffff | ber 00000000 | unc 00000ef6 | FE_HAS_LOCK status 1e | signal 0000 | snr ffff | ber 00000000 | unc 00000ef6 | FE_HAS_LOCK status 1e | signal 0000 | snr ffff | ber 000001d0 | unc 00000ef5 | FE_HAS_LOCK status 1e | signal 0710 | snr 0000 | ber 00000000 | unc 00000ef6 | FE_HAS_LOCK status 1e | signal 0000 | snr ffff | ber 00000240 | unc 00000ef5 | FE_HAS_LOCK status 1e | signal 0900 | snr 0000 | ber 00000000 | unc 00000ef6 | FE_HAS_LOCK status 1e | signal 0000 | snr ffff | ber 00000000 | unc 00000ef5 | FE_HAS_LOCK

claude@ch:~$ tzap "Direct 8" (this channel work) using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 474000000 Hz video pid 0x00a0, audio pid 0x0050 status 03 | signal dc0d | snr 0001 | ber 001fffff | unc 0000ffff | status 1f | signal dc11 | snr 0001 | ber 00057010 | unc 00000046 | FE_HAS_LOCK status 1f | signal c010 | snr 00c0 | ber 00029230 | unc 00000018 | FE_HAS_LOCK status 1f | signal 4830 | snr 0002 | ber 0000dab0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 6a30 | snr 0000 | ber 00011d90 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7610 | snr 0000 | ber 00014130 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0430 | snr 0000 | ber 00005840 | unc 00000000 | FE_HAS_LOCK status 1f | signal 6100 | snr 0000 | ber 000074c0 | unc 00000000 | FE_HAS_LOCK status 1f | signal d300 | snr 0002 | ber 0000af80 | unc 00000000 | FE_HAS_LOCK status 1f | signal be00 | snr 0000 | ber 00009640 | unc 00000000 | FE_HAS_LOCK status 1f | signal 5900 | snr 0000 | ber 0000e730 | unc 00000000 | FE_HAS_LOCK status 1f | signal 9c30 | snr 0001 | ber 00015770 | unc 00000000 | FE_HAS_LOCK status 1f | signal 5d30 | snr 0000 | ber 0000bbf0 | unc 00000000 | FE_HAS_LOCK


i think, this look like a wrong initilisation ????