TechniSat SkyStar 2 TV PCI / Sky2PC PCI: Difference between revisions
m (fixed link) |
(merged info from duplicate page) |
||
Line 4: | Line 4: | ||
This card is known to work quite well under Linux. |
This card is known to work quite well under Linux. |
||
---- |
|||
== For SuSE 9.1 == |
|||
any tips on which drivers / applications / commands to use? (suse 9.1) |
|||
in german: |
|||
http://wiki.ubuntuusers.de/B2C2 [http://wiki.ubuntuusers.de/B2C2] |
|||
i used the following commands: (suse9.1) |
|||
install some dvb-packets from the suse9.1-dvd (i needed no additional packages from the internet) |
|||
then: |
|||
some of the following commands: ??? |
|||
modprobe budget // ??? |
|||
modprobe stv0299 // for newer Revision (2.6) |
|||
modprobe mt312 // for older Revision (2.3) |
|||
modprobe skystar2 // ??? |
|||
bei USB modprobe b2c2-flexcop-usb |
|||
then: |
|||
channel search: |
|||
dvbscan /usr/share/doc/packages/dvb/scan/dvb-s/Hotbird-13.0E > LIST1 |
|||
cp LIST1 .szap/?? |
|||
zap to channel: |
|||
szap -n 194 -r |
|||
view channel: |
|||
kaffeine stdin:// < /dev/dvb/adapter0/dvr0 |
|||
worked here with the older revision of SkyStar2 |
|||
== For Fedora Core 5 == |
|||
1. Install the needet DVB Applications: |
|||
yum install dvb-apps |
|||
2. Load the needet modules: |
|||
modprobe budget |
|||
modprobe stv0299 |
|||
then you should have a new device in /dev/dvb/ |
|||
[[Category:DVB-S]] |
[[Category:DVB-S]] |
Revision as of 02:21, 14 February 2007
A DVB-S card produced by TechniSat based on the B2C2 FlexCop Chipset. Early versions contained the STV0299 Demodulator, newer ones the MT312.
Some early versions are known to have heat problems, but as far we know this issue has been solved in the meantime.
This card is known to work quite well under Linux.
For SuSE 9.1
any tips on which drivers / applications / commands to use? (suse 9.1)
in german:
http://wiki.ubuntuusers.de/B2C2 [1]
i used the following commands: (suse9.1)
install some dvb-packets from the suse9.1-dvd (i needed no additional packages from the internet)
then:
some of the following commands: ???
modprobe budget // ??? modprobe stv0299 // for newer Revision (2.6) modprobe mt312 // for older Revision (2.3) modprobe skystar2 // ??? bei USB modprobe b2c2-flexcop-usb
then:
channel search:
dvbscan /usr/share/doc/packages/dvb/scan/dvb-s/Hotbird-13.0E > LIST1 cp LIST1 .szap/??
zap to channel:
szap -n 194 -r
view channel:
kaffeine stdin:// < /dev/dvb/adapter0/dvr0
worked here with the older revision of SkyStar2
For Fedora Core 5
1. Install the needet DVB Applications:
yum install dvb-apps
2. Load the needet modules:
modprobe budget modprobe stv0299
then you should have a new device in /dev/dvb/